Backing Up For Clean Install On The Same Drive

Nov 11, 2009

I want to do a clean install of my purchased Windows 7 from Windows 7 RC. The problem is I have a lot of data that I want to keep and since it is about 500GB in size, i have no cheap way of backing it up (obviously considering buying another HDD, but i'd rather not for now). I was thinking that maybe I should partition my 1TB main HDD into 2, and transfer all my data over to new partition, format/clean install the old one and lastly merge the partitions. Is this possible?

View 5 Replies


ADVERTISEMENT

Backing Up Data Before A Clean Install?

Mar 10, 2012

i own 2 HDD's one for installation and a media drive. Last time i reinstalled i had huge issues gaining permissions to my media and ended up deleting about 600gb of data. After recently trying out windows 8 i was stupid enough not to data my data and thought win8 would install onto a partition i made for it. I recovered my windows 7, but encountering lots of problems, so i think its time for a clean install. Is there a way to keep my permissions on my media drive for my new install? I don't have an external drive.

View 1 Replies View Related

Clean Install Onto New Drive

Nov 20, 2009

I have Windows 7 rc running on one of my 2 ide drives, with XP on an SATA drive - dual booting.

I purchased a 500gb SATA drive to replace the the 2 ide drives

The plan is to:

- connect the new drive while shutdown

- boot into XP

- Partition new drive, with the first partition active(with partition Magic).

- Transfer non-OS partition data to the new ones

- shut down and disconnect the ide drives

- insert Windows 7 disc and perform install on first partion of new drive.

I understand that the MBR is on the Windows 7 partition.

Will I have any problems with the XP install, or will the new Windows 7 install create a new MBR to allow dual boot?

I know I'll have issues with drive letters. But other than the XP, and Windows 7 partitions it's just data - no programs.

Or, are there any other problems you see with my procedure?

View 1 Replies View Related

BSOD After Clean Install On New SSD Drive

Jun 28, 2012

Is Windows 7

- x64 ?
- the original installed OS on the system
- full retail version
- What is the age of system (hardware)? approx. 1 year, ssd drive new
- What is the age of OS installation (have you re-installed the OS?) clean install

I have recently (4 days ago)aquired a new Crucial 128Gb ssd drive and performed a clean installation of windows 7 64bit, since then i have been experiencing random BSODs (3 times so far)All software is genuine. Have performed full malware and antivirus check. Results are clean.

View 3 Replies View Related

How To Do Clean Install / Upgrade On New Drive

Oct 18, 2009

I own Windows Vista 64bit, and have ordered Windows 7 Professional 64bit upgrade. How do I do a clean installation of Windows 7 on a new hard drive?

View 7 Replies View Related

Clean Install Windows 7 - Cannot Reformat Drive

Aug 23, 2012

I'm trying to do a clean reinstall, but I can't reformat the drive. I don't get very far, menu 'where do you want to install window', which is supposed to have a Format option, it doesn't!

View 7 Replies View Related

Clean Install Which Hard Drive Do I Choose?

Dec 22, 2010

I'm doing a clean install on my computer, and it's going alright until it asks me to choose which hard drive I want to install Windows 7 on. Apparently I have 2: a C drive and a D(Recovery) drive.What should I do in this situation? Should I just install on the C drive, or should I do what it says here: Partition the Hard Drive in a Windows 7 Install and delete the partitions and create a new one.

View 7 Replies View Related

Clean Install Onto Secondary Internal Drive

Sep 28, 2009

I have a Core 2 Duo PC with 2 SATA internal drives:

Seagate 320 gig, with C and D partitions. C contains a legit retail upgrade version of Vista Home. D is for data.

Western Digital 640 gig, with a single E partition, currently used as backup.

I ordered a Windows 7 Home Premium retail upgrade at the discounted price a few months ago and expect it in a month.

My Seagate drive is running low on space and I want to retire it. I would like to boot to the Win 7 DVD, have my Vista install on the Seagate recognized, and then do a clean install of Windows 7 on the Western Digital drive, currently E.

I hope to buy another considerably larger backup drive shortly to replace the Western Digital as a backup drive.

Will the WD drive be available as a location for the installation in these circumstances?

Any previous time I have installed MS operating systems, I always chose to install to the same drive as the existing OS. This time things are different due to little space on the Seagate drive. Windows 7 would certainly fit on my current C, but I want to retire that drive.

Or will this remain a complete unknown until some time after October 22?

Or will I be forced to install to the Seagate and then somehow migrate the install to the WD?

I have not played with the RC, so I don't know what options are normally presented during the install.

View 9 Replies View Related

Do I Have To Partition My Hard Drive For Clean Install ?

Oct 27, 2009

I have download windows 7, backed up all my drivers and copied all my important info onto my external Hard drive and am about to try and clean install windows 7.

But do i have to partition the hard drive? My Dell laptop has a 110GB hard drive which came already partitioned. 10GB is called 'Recovery', do i need to do the same and make a larger partition and install Windows 7 or just leave it as it is?

View 9 Replies View Related

Install Upgrade Version On Clean, New Drive

Feb 5, 2010

I have a dead computer, it was a p4 winXP box 6+ years old. I will be assembling a new computer with 64 bit processor and SSD boot drive. I have a full XP license. I would prefer to buy an 'upgrade' version of Windows 7, but will I be able to install an upgrade version of windows 7 on a clean, blank drive? I would strongly prefer not to have to install XP and activate it just to reinstall windows 7. The additional factor is that some people have posted in forums that an 'upgrade' from a 32 bit os to 64 bit windows 7 does not work.

I would prefer to hear from someone who has actually done it and succeeded or failed, not 'it should work' or 'it should not work', because I can find people posting both ways theorizing that it should or should not.

View 6 Replies View Related

Clean Install Compress The Drive Save Space

Mar 30, 2012

I just put in a new hard drive and installed my Windows 7. Under properties / General there is an option to "Compress this drive to save space." By checking this does it compromise performance at all?

View 2 Replies View Related

Limited Access To D Drive After Windows 7 Clean Install

Mar 1, 2011

I recently did a clean install of Windows 7 pro (64 bit) over an XP pro (32 bit) with 2 HD. The install proceeded without any major "hiccups". After the install, I noticed that when I try to access files on the "D" drive --- my second, I get error messages stating "user does not have access". I have tried troubleshooting but to no avail. Really would like to access those files. Both drives "show" NTFS where they were both FAT32 prior to the new OS. I don't understand how I can access the files on the "C" drive but not on the "D" drive. The files that I would most like to access are *.doc and *.pdf.

View 1 Replies View Related

Wiping Hard Drive Clean To Install Windows 7

Mar 9, 2011

I bought an HP desktop about 2 years ago with vista 64 bit on it and it has been crappy ever since. I've had problems with programs not being recognized, things not installing at all when they should, and it freezing up for no good reason. Anyway, I went out and bought Windows 7 ultimate the full version. I saved the few files I have on a jump drive and I want to completely wipe out the hard drive and install windows 7 and start from scratch.

View 9 Replies View Related

Error 0x80070057 During Clean Install On New Hard Drive

Dec 19, 2011

I decided to replace my hard drive because it seemed to have viruses that were making it run incredibly slow. I put in a brand new hard drive and proceded to run the Windows 7 Ultimate disk. I got as far as the beginning of the actual installation (after telling it what partition to put it on) and it ran for a few minutes and then I got the errror message 0x80070057.

View 2 Replies View Related

Clean Install Of Windows 7 But Uncleared Hard Drive?

Jan 4, 2013

Recently did a clean install of windows 7 on my laptop but when I finished the install, I noticed that there still 158 gb used space on my hardddrive. Is this normal? I thought I had reformatted the entire system as i don't have aceess to any of my pre-existing files...

View 2 Replies View Related

Hard Drive Options Not Showing Up For Clean Windows 7 Install

Apr 6, 2012

I purchased an Inspiron 15R today and wanted to do a clean install of Windows 7 right out of the box. I'm using a Windows 7 disk from another machine.I formatted the drive and all of it's partitions (recovery etc.) and installed the OS. After booting though I get sent to an error screen that tells me Windows had an error starting up and that I should choose a way to startup with the usual safe mode etc. No matter what I choose it sends me to this screen. So I booted from the disk again to attempt to format and reinstall, but now I have no disk drives to install to.

I have run a diagnostics check and nothing seems to be wrong, the HDD is still being recognized in the BIOS. What can I do to get my HDD back and showing up in the install destination options?

View 1 Replies View Related

Will Clean Install Of 64bit Make Files On Another Drive Incompatible

Jun 19, 2012

I'm currently doing a clean install of windows 7 64 bit on my 32 bit XP computer, I used the upgrade advisor beforehand and it said a lot of my programs where 64 bit compatable, and a large chunk of them are on my other hard drive (the one im not installing windows 7 on). After the install is finished will they be useable or will I have to reinstall them?

View 1 Replies View Related

Error 0x80070057 During Clean Install Of Windows 7 On New Hard Drive?

Dec 17, 2011

What do I do now? I decided to replace my existing hard drive as I thought it was damaged due to viruses. I installed a new hard and then used my Windows 7 Ultimate DVD to install. I got as far as the above. If this question has been answered somewhere else on this site

View 3 Replies View Related

Windows 7: Clean Install On A 2-partition Drive - Data Loss?

Oct 26, 2011

I currently have a 500GB SATA drive with 2 partitions, C: has Vista Ultimate in it and most of my (Really Important) data is in D:- I do not have an external drive with enough space to back up both partitions, only C: -- If I install Windows 7 on C:, will I also lose all the data in D: (Partition 2)?I want to be 100% sure I won't end up with data loss on D: if I do a clean install on C:

View 11 Replies View Related

Backing Up The C Drive?

Aug 23, 2012

I have Acronis true image 2010 and it works sometimes but I just got a corrupted archive and I lost my C drive. So I'm thinking about another Backup program, or buying Acronis true image 2012 with Norton Ghost 15 so if one fails I have the other, but for both of them to be on the same computer might cause problems.

View 5 Replies View Related

Backing Up Encrypted Drive

Aug 20, 2012

I have a machine Running Win 7 Enterprise x64, the drive has been encrypted with BitLocker. Recently the machine stopped booting. I have tried normal boot, last known good configuration, safe mode w/ networking, safe mode and none of these will boot, they all get a BSOD.

I have the BitLocker Recovery Key so that part is not an issue. Is there a Bootable CD that has the ability to unlock the drive or does anyone have any other ideas?

View 1 Replies View Related

Backing Up Boot Drive Gives Error

Jun 22, 2012

I am trying to backup my C drive so that I can RAID 2 SSD's, but when I try to go to the windows backup software it includes my F: drive as a System drive. Any ideas how to fix this? I believe it may be because my Internet Explorer Cache folder is there. I try to delete it and it says It is in use by the Operating System. I try to move the folder to my C: drive and delete it on the F: drive and I still get the same error. I don't know why. Could this be the reason Windows backup is trying to backup both drives? I'm not sure if the internet explorer cache is the reason, or maybe it could be something else, like my MBR is on that drive?

View 1 Replies View Related

Checking Backup Message When Backing Up Flash Drive?

Jul 25, 2012

I was trying to backup my flash drive and all of a sudden, it did not work. I kept plugging my flash drive in and out but that did not work. Here is the error that I got."The last backup did not complete successfully because Windows Backup could not backup any of the drives in the backup. Make sure that the drives are plugged in and working correctly."The error above is the message when i backed up my flash drive. Here is the system informationTech Support Guy System Info Utility version 1.0.0.2 OS Version microsoft Windows 7 Home Premium, 64 bit Processor: Intel(R) Core(TM) i3 CPU M 370 @ 2.40GHz, Intel64 Family 6 Model 37 Stepping 5 Processor Count 4 RAM: 7860 Mb Graphics Card: Intel(R) HD Graphics, -293 Mb Hard Drives: C: Total - 476937 MB, Free - 410972 MB; D: Total - 476937 MB, Free - 453231 MB;Motherboard: Dell Inc.,Antivirus: None

View 1 Replies View Related

Backing Up To A Hard Drive And A DVD: Big Image Size Differences?

Apr 24, 2012

I've backed up Windows through the official Windows Backup tool (in the Control Panel) to a hard drive (actually, a second partition). It takes about 8-12 GB (don't remember correctly). Then, right after that, I chose to make a backup also on a DVD, and, surprisingly, one DVD was enough! First of all, it's weird that it could fit into one DVD while if I tried to burn the files form the backup on the hard drive, I would need at least two. And then the second thing: the files on the DVD all take about 3.4 GB. I tried making an image of it though Alcohol 120, and the MDF file takes about 3.4 GB. ImgBurn couldn't make an image, because it's a multiple session DVD. So why is there such a difference in size between system images backed up to the hard drive and a DVD? Can I trust a DVD?

By the way, I tried creating backup with Arconis True Image (I don't remember true name) and Norton Ghost 15 to a hard drive, and their images take about 3 GB. So if the real size of my system image is about 3 GB, then why did Windows backup on HDD take so much place?

It's Windows 7 Ultimate 32 bit, by the way.

View 4 Replies View Related

Make A Recovery Section By Splitting Some Of The Drive Space And Backing Up On That?

Sep 27, 2012

Can you make a recovery section by splitting some of the drive space and backing up on that? or is a backup image different to a system recovery?

View 5 Replies View Related

Backing Up Windows 7 Home Premium 64bit To 3TB External Drive Fails

Nov 26, 2011

Attempting to backup my HP laptop to my new Seagate Expansion 3TB plug and play external drive returns the error shown in the screenshot below. After searching Google for a solution it seems the backup utility in Windows 7 is not compatible with high capacity drives over 2.5TB. Am I understanding this correctly? How am I going to backup my laptop onto this drive?I did come across a proposed solution here but apparently this would prevent the drive from working with Windows XP. As I need to move file between the laptop and an XP machine this is not an option for me.There is approximately 126GB of data on the machine and the drive is brand new, formatted to NTFS and otherwise empty.Perhaps I need to use a third party software to backup?

View 6 Replies View Related

Error When Backing Up With Windows Media Player Songs In Backup Drive

Nov 2, 2011

I've got all my music in an external drive. When i configured bakups i selected that same external drive as destination to back up to.

Now, i added the music from that drive to windows media player and now, when the computer backs up, i've got this error telling me some files were omitted (namely all the music) because they're on the same drive as the backup's destination.

I'm going to use WMP because it's already there (regardless of there being a million better choices of media players/managers) so don't bother suggesting otherwise.

My question is: is there any special folder i should avoid backing up so this error doesn't happen? (like the one that contains WMP database)

More info:
Event type: Warning
Source: Windows backup
Event ID: 4106

View 1 Replies View Related

Cannot Install 0x80070714 When Try To Install Windows 7 Into Clean Disk / Installation Just Stops

Feb 13, 2013

I am getting an error "cannot install" 0x80070714 when I try to install windows 7 into a clean disk and the installation just stops..

View 3 Replies View Related

Clean Install Versus System Image File Install?

Jun 10, 2012

tell me if a re-install from a system image file on my notebook is as good as a clean install from say a retail disk.I can not format all my drive and start a fresh. Can my System image file become glitchy or infected with a virus.?

View 5 Replies View Related

IDT Audio Drivers Won't Install - Windows 7x64, Clean Install?

Jan 30, 2012

I'm working on a re-install of all components following a complete corruption of the boot sector on my drive which could not be fixed with repairs. The last time I installed everything fresh, I had no issues. Between then and now, there have been no hardware changes on my system, but now I am having issues installing the IDT Codecs. I keep getting an error along the following lines: Quote: ExitError: Error=Device Object not present, restart the system and run setup again. Running under compatibility mode, and running drivers from both the motherboard CD and the manufacturer website both have the same effect. The CD, when booted, says "This OS not support!" and only contains 32-bit vista codecs. ECS' website download indicates the IDT drivers as being compatible with Windows 7. Both do not work. It is almost as if the hardware "disappeared," despite the fact that I was using the drivers quite successfully till just 2 days ago, when the boot sector went kaput.

Windows has installed its own default set, which do nothing to power the 8mm jacks which I use with my speakers, but instead put sound through the HDMI, which is useless because I use a dedicated graphics card. I have tried uninstalling this codec and re-installing IDT, to no effect. Windows replaces with its own default codec.I have referenced this thread here, but offered solutions do not seem to work for me: Intel IDT Audio Driver will not install

View 5 Replies View Related

Performance Difference Between Windows 7 Clean Install And Upgrade Install

Feb 3, 2010

Does anyone know whether there is a difference in performance between doing a clean install of Windows 7 vs upgrading Vista? Any better stability? I'm just wondering whether it's worth the trouble of the clean install.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved