Backing Up To A Hard Drive And A DVD: Big Image Size Differences?
Apr 24, 2012
I've backed up Windows through the official Windows Backup tool (in the Control Panel) to a hard drive (actually, a second partition). It takes about 8-12 GB (don't remember correctly). Then, right after that, I chose to make a backup also on a DVD, and, surprisingly, one DVD was enough! First of all, it's weird that it could fit into one DVD while if I tried to burn the files form the backup on the hard drive, I would need at least two. And then the second thing: the files on the DVD all take about 3.4 GB. I tried making an image of it though Alcohol 120, and the MDF file takes about 3.4 GB. ImgBurn couldn't make an image, because it's a multiple session DVD. So why is there such a difference in size between system images backed up to the hard drive and a DVD? Can I trust a DVD?
By the way, I tried creating backup with Arconis True Image (I don't remember true name) and Norton Ghost 15 to a hard drive, and their images take about 3 GB. So if the real size of my system image is about 3 GB, then why did Windows backup on HDD take so much place?
It's Windows 7 Ultimate 32 bit, by the way.
View 4 Replies
ADVERTISEMENT
Dec 16, 2009
My C: drive has been displaying a size of around 60 gb with 40 free even though it's a 300 gb drive. I thought the issue would resolve with a clean install, so I did that. Now I have a fresh install and i need to reinstall everything, but the problem isn't fixed. Below are some screen shots of the drive size:Disk Management, showing my C: Drive's full size ^Any suggestions of how I can reclaim this space?? I've tried a few things already to no avail. If you need any more information about my computer to help, let me know. This is pretty annoying, 'cause I want to use that extra space to install Ubuntu.Oh, I just rememberedWhen I look at the drive in Paragon Partition Manager, it shows the full Drive size, but says that the space that is missing from Windows is in use...
View 9 Replies
View Related
Sep 4, 2011
OS: Windows 7 Home Premium 32 bit The windows system image backed up on my external hard drive (2TB WD USB3) is not showing while restoring the PC from an image.
The only option available is my hard drive partition on which i also had saved a system image. Though windows recommends External hard drive for backing up image when backing up the system.
View 4 Replies
View Related
Sep 8, 2011
Would making a complete backup image of windows 7 ( system , documents , media , etc)Restore it to what it used to be , because everything is fine I just want to increase the size from 150 GB to 1TB ( I just got the WD caviar green ) , I've les than 20 GB left.
View 1 Replies
View Related
Nov 11, 2012
Using win 7 backup, I want to backup up my ssd (now its in full go). Where is the best place to back up? I have a 500gb hdd with my docs on (was my old C drive etc) is it best to back up here or to an ext hdd? Also just in case of failure I am thinking of backing up the hdd with my docs on. I have acronis true image but would rather using windows system image, because once I've done a clean install to the SSD I can restore using the system image.
View 3 Replies
View Related
Feb 24, 2012
I installed a second hard drive on my Windows 7 Dell desktop. The drive is a Seagate Barracuda ST3000DM001 3TB 7200 RPM 64MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive Bare Drive. It's only showing up as 746.39 GB Unallocated.
View 13 Replies
View Related
Mar 28, 2009
It shows that my hard drive is 40gigs which is already almost full. I just recently installed Windows 7 after formatting my C drive. It is also not showing another my recovery drive which I also used for saving. The other drive, I can't find at all.
View 9 Replies
View Related
Jan 15, 2013
I bought a dual sata-usb 3.0 adapter, came with 2A power supply, no problem to start with one of the HD however if I plug two of them most of the time it won't start totally (disk starts but one make strange sound cause not enough power to finish initializing)... Of course both drive are fine. Should I get a more powerful AC Adapter?
View 5 Replies
View Related
Jul 19, 2012
I have been told that the maximum individual hard drive size for Windows XP Pro is 2tb and that Windows 7 can handle 3tb drives. What is the largest single drive that 7 can handle?
View 1 Replies
View Related
Jul 19, 2012
I have been told that the maximum individual hard drive size for Windows XP Pro is 2tb and that Windows 7 can handle 3tb drives. What is the largest single drive that 7 can handle?
View 2 Replies
View Related
Jul 23, 2011
Considering a self build project : Intel E5700 CPU 2 X 2 Gig Ram 1 TB SATA HDD. What would be the optimum partition size for the Windows 7 Home Premium 64bit OS
View 8 Replies
View Related
Sep 17, 2012
i tried to used pc disk clone x to clone my win7 to a smaller hard drive.now for some reason My Computer shows as 381 gig size instead of 682 gighere is a pic tried to make the partition a couple megs smaller to make it realize the actual size and its not working.
View 2 Replies
View Related
Oct 23, 2011
I Image my C drive on the 2nd partition of the same drive. I then copied the image to an external drive. If I lose my drive that my C drive is on and then replace it with a new drive can I Image from my external drive to the new Hard drive and it will be the same size and make? The reason for this question is my image will be coming from a different drive than it was image to.
View 2 Replies
View Related
Apr 12, 2012
I am stack at certain process while trying to load a system image onto new hard drive using Windows 7 x64 image restore function from the windows 7 disk, I got my primary drive 500 gigs with windows 7 and all my files,I made a system image onto another clean internal hard drive size 160 gigs and I was successful, now I disconnected my 500 gigs primary hard drive, attached a new 250 gig hard drive and I proceeded to load the system image, I boot to windows 7 cd,I get the option to repair , click on restore from system image file , everything looks good computer finds the hard drive 160 gigs with the system image as source,I press next look for the target drive and I see it there 250 gigs drive thats freshly formatted ..., I select the target press next it all looks good and then I get the screen that there is no target hard drive... I made sure that this hard drive is not being excluded from format and new process... I am lost ... what am I doing wrong here, I reformatted those 2 drives twice I tried this operation about 8 times , I get the error message each time I am attempting to create this new system image..
View 9 Replies
View Related
Nov 1, 2009
I have two internal 500Gb SATA drives and one external 500Gb ESATA drive.
I wanted to have 2 backups images of my drive as a safety measure. One on the internal and one on the external ESATA drive.
The backup image on the internal drive took about 25 minutues and seems OK. The image size is about 75Gb.
I then tried a second backup on my external drive. ESATA is supposed to be faster than USB. After about three and a half hours the backup stopped and said that it had failed. Any ideas please?
View 3 Replies
View Related
Nov 7, 2011
I have my present hard drive backed up using Windows Backup on an external hard drive. I want to replace the 500gb hard drive in my desktop with a 1tb hard drive, I am assuming (i know bad word) after the transfer is complete the new hard drive will be recognized and function on boot as the 500gb drive did.
View 1 Replies
View Related
Jan 27, 2012
It's time to format my hard drive. It hasn't been formatted since 2008 when it was bought and it's having some major issues.I made a system image. when i was installing it, I couldn't check the option to "get rid of the partitions and format the hd". It requested the drivers, asked me to insert the disc, but I don't have any disc with the drivers
View 12 Replies
View Related
Dec 10, 2011
I have a Gateway computer that came preloaded with Windows 7.
I am replacing the internal hard drive and I am attempting to install the factory system recovery image from the system recovery disc that I made when I bought the computer. After installing the drive and booting up from the recovery disc, I go into full factory recovery but when I go in to the option to "restore to factory default" the option is grayed out. Do I need to format the drive first? How do I do this outside of windows?
View 14 Replies
View Related
Jul 28, 2012
Would like opinions on preferred easy full image back-up apps.
View 2 Replies
View Related
Nov 10, 2011
I just installed a new hard drive after my previous one failed to start up. I have a backup image stored on an external WD Passport. The install went well. I turn on my tower with the Windows 7 recovery disc in, start up System Image Restore and plug in my Passport. The system restore recognizes my Passport and when I go through the wizard to reformat and partition the disk to match the layout of the recovery image, I get an error message saying "The system image restore failed. No disk that can be used for recovering the system disk can be found. *hyperlink* Details."Details states, "No disck that can be used for recovering the system disk can be found. Try the following: 1) A probable system disk may have been excluded by mistake. a. Review the list of disks that you have excluded from the recovery for a likely disk. b. Type LIST DISK command in the DISKPART command interpreter. The probable system disk is usually the first disk listed. c. If possible,, remove the disk from the exclusion list and then retry the recovery.Tried that, my disk is not listed as an exclusion.2) A USB disk may have been assigned as a system disk. a. Detach all USB disks from the computer. b. Reboot into Windows Recovery Environment then reattach USB disks and retry the recovery.
View 1 Replies
View Related
Jul 19, 2012
Not exactly sure how to explain or even exactly what im looking for but basically I had an older laptop running windows 7 home premium that allowed me from the boot menu to re install windows & home premium w/o key or anything. It was placed on a partition of my hard drive. I would like to do this again but im not sure what exactly im looking for or how to search for it in shorter terms. It was an MSI Intel duel core laptop. I would like to put it on my toshiba quad core. Im familiar with partitioning software and image restoration but not sure what exactly i should be looking for to do this. Just a clean Reinstallation of my OS without needing keys i dont care to back up any information except my os which is a clean install. Update Toshiba has this HDD recovery but i am not sure if this is what i need/want. MSI had a MSI recovery which did what i want. Is this the same/similar?
View 9 Replies
View Related
Jan 11, 2013
I have just replaced the hard drive on my laptop as the original was starting to fail. I created an image of the windows 7 pro 32bit original drive. I replaced the hard drive and installed a clean 64 bit version of windows. I have also installed a clean 32 bit version as a dual boot. I now want to use the original image of the 32 bit system and install this on the clean 32 bit installation.I have tried this using the image software I have (snapshot) but cannot get it to work.
View 2 Replies
View Related
Dec 27, 2012
how to create windows image bootable partion in my hard drive
View 1 Replies
View Related
Oct 11, 2012
On hard drive drive only Win7 mirror image."Some Smart" deleted all. Motherboard was bad - change motherboard & memory.Start resoring windows and when it start setting for first time say config error.
View 1 Replies
View Related
Feb 26, 2012
I have 2x160gb intel SSD disks running as RAID0. Recently my motherboard had failed and I replaced it with new one (different model). Couldn't access OS because apparently some RAID data is kept on the motherboard and that was gone, so I decided to use a backup. Booted from windows 7 installation disk and selected backup,
I click on 'repair', get to the 'select a system image backup'. Select 'use the latest available system image (recommended). Click 'next' I get the message 'all disk to be restored will be formatted and replaced with the layout and data in the system image'. Click Yes. But then got an error saying:
"The system image restore failed. The disk that is set as active in BIOS is too small to recover the original system disk. Replace the disk with a larger one and retry the restore operation. (0x80042407)"
Disk is completely empty with only 1 partition (deleted all partitions and reformatted and then created one). Before motherboard problem I had several partitions, but I imagine that restore would recreate them. Why do I get 'disk to small error' when I am restoring on the same disk? RAID configuration problem? Could stripe size be an issue here?
My OS: Windows 7 64 Professional
View 1 Replies
View Related
Nov 30, 2012
I have always backed my personal hard drives using images for easy restoration
However i now have 2 PCs that need backup performed and they just want the data so an image is not necessary thus i only want the important data ie; documents and settings important files no junk such as updates or temp files
I would prefer to remove the hard drives and plug it into another pc to perform the backup instead of doing the back up from the actual machine
View 1 Replies
View Related
Aug 23, 2012
I have Acronis true image 2010 and it works sometimes but I just got a corrupted archive and I lost my C drive. So I'm thinking about another Backup program, or buying Acronis true image 2012 with Norton Ghost 15 so if one fails I have the other, but for both of them to be on the same computer might cause problems.
View 5 Replies
View Related
Aug 20, 2012
I have a machine Running Win 7 Enterprise x64, the drive has been encrypted with BitLocker. Recently the machine stopped booting. I have tried normal boot, last known good configuration, safe mode w/ networking, safe mode and none of these will boot, they all get a BSOD.
I have the BitLocker Recovery Key so that part is not an issue. Is there a Bootable CD that has the ability to unlock the drive or does anyone have any other ideas?
View 1 Replies
View Related
Nov 14, 2009
I have a question about System Image Backups. (Win 7 Ultimate, 64-bit).
I have setup System Image Backups to my external 1TB eSATA drive.
I have chosen to allow Windows to manage the space used for backup history, Windows says it will use up to 279GB (which is fine).
The properties on the actual "Windows Image Backup" folder on the external drive shows the size as 32.6GB. However The Windows backup menu "Manage Windows Backup disk space" shows "System Image: 68.90 GB."
Primary Question:
Is Windows Backup storing my system images somewhere else in addition to this folder, or is the menu just plain wrong?
Additional Question: Is the Windows Backup utility capable of doing differential backups for the system image, or is each backup a full backup? The GUI menus are not giving me enough information. Based on what I see, it looks like System Image backups are always full, and data files are incremental or differential.
View 4 Replies
View Related
Nov 11, 2009
I want to do a clean install of my purchased Windows 7 from Windows 7 RC. The problem is I have a lot of data that I want to keep and since it is about 500GB in size, i have no cheap way of backing it up (obviously considering buying another HDD, but i'd rather not for now). I was thinking that maybe I should partition my 1TB main HDD into 2, and transfer all my data over to new partition, format/clean install the old one and lastly merge the partitions. Is this possible?
View 5 Replies
View Related
Jun 22, 2012
I am trying to backup my C drive so that I can RAID 2 SSD's, but when I try to go to the windows backup software it includes my F: drive as a System drive. Any ideas how to fix this? I believe it may be because my Internet Explorer Cache folder is there. I try to delete it and it says It is in use by the Operating System. I try to move the folder to my C: drive and delete it on the F: drive and I still get the same error. I don't know why. Could this be the reason Windows backup is trying to backup both drives? I'm not sure if the internet explorer cache is the reason, or maybe it could be something else, like my MBR is on that drive?
View 1 Replies
View Related