I Image my C drive on the 2nd partition of the same drive. I then copied the image to an external drive. If I lose my drive that my C drive is on and then replace it with a new drive can I Image from my external drive to the new Hard drive and it will be the same size and make? The reason for this question is my image will be coming from a different drive than it was image to.
View 2 RepliesOS: Windows 7 Home Premium 32 bit The windows system image backed up on my external hard drive (2TB WD USB3) is not showing while restoring the PC from an image.
The only option available is my hard drive partition on which i also had saved a system image. Though windows recommends External hard drive for backing up image when backing up the system.
I have two internal 500Gb SATA drives and one external 500Gb ESATA drive.
I wanted to have 2 backups images of my drive as a safety measure. One on the internal and one on the external ESATA drive.
The backup image on the internal drive took about 25 minutues and seems OK. The image size is about 75Gb.
I then tried a second backup on my external drive. ESATA is supposed to be faster than USB. After about three and a half hours the backup stopped and said that it had failed. Any ideas please?
Tech Support Guy System Info Utility version 1.0.0.2OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bitProcessor: Intel(R) Pentium(R) CPU B970 @ 2.30GHz, Intel64 Family 6 Model 42 Stepping 7Processor Count: 2RAM: 6068 MbGraphics Card: Intel(R) HD Graphics, -1988 MbHard Drives: C: Total - 595370 MB, Free - 531224 MB;Motherboard: TOSHIBA, Portable PCAntivirus: McAfee Anti-Virus and Anti-Spyware, Updated and EnabledCan I make a reliable "ghost copy" of my hard drive that could be copied into a new hard drive. I have a separate external hard drive doing regular backups but the backup copies don't include programs or the operating system.
View 13 Replies View RelatedI just spent like 18 hours copying 600K files, 1.33 TB, from a USB 2.0 ext. drive to a 1.36 TB USB 3.0 partition, but at the very end I got a handful of prompts to replace folders that already existed in the newly created folder, asked me to merge the original folder with the one just copied on the destination drive, eventually asking for permission to replace thousands of items and that's what it's doing now. I don't know what's going on. It appears that all files are there in both folders on each drive (with the exception of half a dozen that wouldn't copy due to long filenames).
Nearest I can guess is it is writing DOS names in addition to Windows names so the computer is going to spend more than a dozen more hours doing that. Windows Explorer copy wrongly offers to merge folders Windows Explorer copy wrongly offers to merge folders. The folder being copied that is being merged is called Drive(D), probably from a backup of Win 98SE being restored onto a Win XP machine, so it may resemble a system folder to Windows 7.
.I didn't wait for the computer to tell me it was ok to remove the drive in the usb port. Now my computer no longer recognizes the external drive After removing my external hard drive (without the ok) my computer no longer recognizes the external hard drive. What do I do.
View 1 Replies View Relatedits been a long time since i last posted about my bsod and after i fixed them i began to get more of these. the only way i can replicate the problem is when i move or copy+paste files in the computer, mostly if it is from my computer to a external hardrive or usb... i attached the latest minidump file i got 021412-15958-01.zip
Edit: Go another bsod... if it helps i uploaded the minidump from that crash 021512-21153-01.zip
My computer crashes every time I transfer large amounts of data onto the D drive of my computer. There is no such problem with my C drive.
First detected this problem while I was transferring some data through LAN. This problem occurs even when I am copying data from my C drive to D drive. I was able to copy a 700MB file onto the drive.
[code]...
This isnt the first time i use the windows backup to create a system image, ive done it before using this external hdd with no problems at all.But now, for some reason it wont detect this hard drive, it only gives me the option to store the image on a dvd, i dont know why?, i tested the hard drive on a different computer and IT WORKS, i tried to create an image and it does work.
View 5 Replies View RelatedI've just recently realized that copying folders to a backup hard drive resets their "created" date. Should my computer ever crash, all my backup files will state to have just been created on that certain date. Me, being the organize-freak I am, have been looking for a solution so my backed up files can have the same time stamps as on my computer right now. I've done a little searching, and have found that people always recommend Robocopy. Problem is, I can't understand a word of the tutorials. How to run Robocopy to carry out what I want? And also just for the heck of it, is Robocopy the only solution? Is there some sort of back up program on Windows 7 that can do that?
View 3 Replies View Relatedhow can i make a backup/ system image for my internal and external hard drives at the same time?
View 4 Replies View Relatedcan u backup your data (or an system image)to an internal and external hard drives at the same time?
View 1 Replies View RelatedI have just installed a 3TB external drive for backup purposes and was testing the image restore feature. If I use the external drive on the usb 3.0 port when entering F8/System Repair/Repair from image, the drive is not detected at all, when I plug it into the 2.0 port it is detected. Within windows itself the drive operates fine on the 3.0 hub. I am guessing its some kind of USB 3.0 driver issue within system repair but wondered if there is a work around. Not sure I want to sit and wait for a restore over 2.0 when it could be using 3.0!
View 9 Replies View RelatedI have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
View 3 Replies View RelatedMe and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
View 6 Replies View RelatedI am replacing my HHD with a SSD and made a mirror image on my backup external drive. When I tried to do the system image recovery, it fails to find the recovery information. It says the no disk that can be used for recovering the system disk can be found.
View 6 Replies View RelatedI have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
View 2 Replies View RelatedLow disk space, Can transfer data on D drive to an external hard drive
View 5 Replies View RelatedI am stack at certain process while trying to load a system image onto new hard drive using Windows 7 x64 image restore function from the windows 7 disk, I got my primary drive 500 gigs with windows 7 and all my files,I made a system image onto another clean internal hard drive size 160 gigs and I was successful, now I disconnected my 500 gigs primary hard drive, attached a new 250 gig hard drive and I proceeded to load the system image, I boot to windows 7 cd,I get the option to repair , click on restore from system image file , everything looks good computer finds the hard drive 160 gigs with the system image as source,I press next look for the target drive and I see it there 250 gigs drive thats freshly formatted ..., I select the target press next it all looks good and then I get the screen that there is no target hard drive... I made sure that this hard drive is not being excluded from format and new process... I am lost ... what am I doing wrong here, I reformatted those 2 drives twice I tried this operation about 8 times , I get the error message each time I am attempting to create this new system image..
View 9 Replies View RelatedI have my present hard drive backed up using Windows Backup on an external hard drive. I want to replace the 500gb hard drive in my desktop with a 1tb hard drive, I am assuming (i know bad word) after the transfer is complete the new hard drive will be recognized and function on boot as the 500gb drive did.
View 1 Replies View RelatedIt's time to format my hard drive. It hasn't been formatted since 2008 when it was bought and it's having some major issues.I made a system image. when i was installing it, I couldn't check the option to "get rid of the partitions and format the hd". It requested the drivers, asked me to insert the disc, but I don't have any disc with the drivers
View 12 Replies View RelatedI have a Gateway computer that came preloaded with Windows 7.
I am replacing the internal hard drive and I am attempting to install the factory system recovery image from the system recovery disc that I made when I bought the computer. After installing the drive and booting up from the recovery disc, I go into full factory recovery but when I go in to the option to "restore to factory default" the option is grayed out. Do I need to format the drive first? How do I do this outside of windows?
Would like opinions on preferred easy full image back-up apps.
View 2 Replies View RelatedI just installed a new hard drive after my previous one failed to start up. I have a backup image stored on an external WD Passport. The install went well. I turn on my tower with the Windows 7 recovery disc in, start up System Image Restore and plug in my Passport. The system restore recognizes my Passport and when I go through the wizard to reformat and partition the disk to match the layout of the recovery image, I get an error message saying "The system image restore failed. No disk that can be used for recovering the system disk can be found. *hyperlink* Details."Details states, "No disck that can be used for recovering the system disk can be found. Try the following: 1) A probable system disk may have been excluded by mistake. a. Review the list of disks that you have excluded from the recovery for a likely disk. b. Type LIST DISK command in the DISKPART command interpreter. The probable system disk is usually the first disk listed. c. If possible,, remove the disk from the exclusion list and then retry the recovery.Tried that, my disk is not listed as an exclusion.2) A USB disk may have been assigned as a system disk. a. Detach all USB disks from the computer. b. Reboot into Windows Recovery Environment then reattach USB disks and retry the recovery.
View 1 Replies View RelatedI've backed up Windows through the official Windows Backup tool (in the Control Panel) to a hard drive (actually, a second partition). It takes about 8-12 GB (don't remember correctly). Then, right after that, I chose to make a backup also on a DVD, and, surprisingly, one DVD was enough! First of all, it's weird that it could fit into one DVD while if I tried to burn the files form the backup on the hard drive, I would need at least two. And then the second thing: the files on the DVD all take about 3.4 GB. I tried making an image of it though Alcohol 120, and the MDF file takes about 3.4 GB. ImgBurn couldn't make an image, because it's a multiple session DVD. So why is there such a difference in size between system images backed up to the hard drive and a DVD? Can I trust a DVD?
By the way, I tried creating backup with Arconis True Image (I don't remember true name) and Norton Ghost 15 to a hard drive, and their images take about 3 GB. So if the real size of my system image is about 3 GB, then why did Windows backup on HDD take so much place?
It's Windows 7 Ultimate 32 bit, by the way.
Not exactly sure how to explain or even exactly what im looking for but basically I had an older laptop running windows 7 home premium that allowed me from the boot menu to re install windows & home premium w/o key or anything. It was placed on a partition of my hard drive. I would like to do this again but im not sure what exactly im looking for or how to search for it in shorter terms. It was an MSI Intel duel core laptop. I would like to put it on my toshiba quad core. Im familiar with partitioning software and image restoration but not sure what exactly i should be looking for to do this. Just a clean Reinstallation of my OS without needing keys i dont care to back up any information except my os which is a clean install. Update Toshiba has this HDD recovery but i am not sure if this is what i need/want. MSI had a MSI recovery which did what i want. Is this the same/similar?
View 9 Replies View RelatedI have just replaced the hard drive on my laptop as the original was starting to fail. I created an image of the windows 7 pro 32bit original drive. I replaced the hard drive and installed a clean 64 bit version of windows. I have also installed a clean 32 bit version as a dual boot. I now want to use the original image of the 32 bit system and install this on the clean 32 bit installation.I have tried this using the image software I have (snapshot) but cannot get it to work.
View 2 Replies View RelatedI can see my external hard drive in device manager, but not in my comp
View 3 Replies View RelatedWhenever I paste a image from web into MS word, MS Words says connecting the server for information, please wait or press Esc to cancel, sometime the copying takes anywhere from 30 sec to 1 min or more. Whats the purpose of connecting the server.
View 3 Replies View Relatedhow to create windows image bootable partion in my hard drive
View 1 Replies View RelatedI just got an external hard drive yesterday, and have been asking a few questions on this forum. So far, people have managed to be very helpful with the previous questions, hopefully someone can do so here too.Reinstalling all my games to external hard drive, need to know if they will / how to make them appear / function properly in my GEF, whether added automatically or manually.I am basically going to have EVERYTHING put onto my 1TB external, and by everything I mean "Music, Pictures, Videos, Documents, Games, and maybe Programs". So, I made a folder for each of those things on it,and only now that I am reinstalling my games into the Programs one have I realized something.I am a bit obsessive about having a fully functioning Game Explorer Folder (GEF) with all my games visible in it. It's my assumption that when I install into an external hard drive, none of those games will be automatically added into the GEF. However, if I add them in manually (using the regedit method in the tutorial), should everything function properly, so long as I have my external hard drive on whenever I use the computer?I just need this to be confirmed before I start reinstalling more. Also, if not, please let me know if there IS a way to get them to show up in my GEF properly, or possibly move the GEF to the external hard drive or get it to recognize things from a different directory.
View 6 Replies View Related