Copying Folders To Backup Hard Drive Resets Created Date
Nov 23, 2010
I've just recently realized that copying folders to a backup hard drive resets their "created" date. Should my computer ever crash, all my backup files will state to have just been created on that certain date. Me, being the organize-freak I am, have been looking for a solution so my backed up files can have the same time stamps as on my computer right now. I've done a little searching, and have found that people always recommend Robocopy. Problem is, I can't understand a word of the tutorials. How to run Robocopy to carry out what I want? And also just for the heck of it, is Robocopy the only solution? Is there some sort of back up program on Windows 7 that can do that?
I have a folder that I'd like to periodically mirror to an external hard disk. How can I easily copy the source to the target, deleting files now deleted in the source, updating files that have been changed in the source, and adding new files to the destination. Would an XCOPY with the appropriate set of switches do the trick - maybe something like
I have a 300GB hard drive that I am trying to attach. After attaching the VHD file and selecting the backup files on the hard drive the device apparently attaches but no drive is created with the next available drive letter so that I can explore the contents of the drive.
I am at my wits end with using windows 7. I am sure this must have been beaten to death on here and I am sorry but I am not sure how to word it to search for the answer.I hook up a spare HD to the USB with the same operating system and every ******** file I try to open on it I have to adjust it for administrator and da da da and I am sick of this, it will take forever to look at the data. How the heck to I fix this once and for all so I can just open what i want to ? I am the administrator...I don't want to be flagged about administrator anything any more.Secondly, if I want to back up data on a stick and there is already a folder of the same name it asks me if I want to merge it. No I dont so I change the name of the file to something different and it STILL always tells me there is a folder that has the same name do you want to merge i
I have most of my games & Steam on this particular SSD & every time I access the drive to add a mod etc there is always at least 50 empty locked .tmp folders (lost count of the number of times I've deleted them) they are all variously named but all start with MSI.. what are they & how can I prevent them from being continuously created.
Just bought a new cyberpowerpc from Fry's, installed a 3rd hard drive (Western Digital 3TB). Everything seems okay except when I try to copy any large files/folders to the new drive. I'm using a folder that is 11.3GB with 686 files. I can copy it from drive 1 to drive 2 no problem. When I copy it from drive 1 or drive 2 to the third drive (the 3TB one), it will start copying then sometime soon after, explorer will close itself down and the computer will end up rebooting itself. Sometimes there will be a BSOD and sometimes it will just reboot without the BSOD.
I have tried to attach the dmp files etc...using the recommendations of the forum. I'd like to use this new drive for backups (it's the reason I got a new pc, my old one crashed and I didn't have a good backup system).
I just spent like 18 hours copying 600K files, 1.33 TB, from a USB 2.0 ext. drive to a 1.36 TB USB 3.0 partition, but at the very end I got a handful of prompts to replace folders that already existed in the newly created folder, asked me to merge the original folder with the one just copied on the destination drive, eventually asking for permission to replace thousands of items and that's what it's doing now. I don't know what's going on. It appears that all files are there in both folders on each drive (with the exception of half a dozen that wouldn't copy due to long filenames).
Nearest I can guess is it is writing DOS names in addition to Windows names so the computer is going to spend more than a dozen more hours doing that. Windows Explorer copy wrongly offers to merge folders Windows Explorer copy wrongly offers to merge folders. The folder being copied that is being merged is called Drive(D), probably from a backup of Win 98SE being restored onto a Win XP machine, so it may resemble a system folder to Windows 7.
Tech Support Guy System Info Utility version 1.0.0.2OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bitProcessor: Intel(R) Pentium(R) CPU B970 @ 2.30GHz, Intel64 Family 6 Model 42 Stepping 7Processor Count: 2RAM: 6068 MbGraphics Card: Intel(R) HD Graphics, -1988 MbHard Drives: C: Total - 595370 MB, Free - 531224 MB;Motherboard: TOSHIBA, Portable PCAntivirus: McAfee Anti-Virus and Anti-Spyware, Updated and EnabledCan I make a reliable "ghost copy" of my hard drive that could be copied into a new hard drive. I have a separate external hard drive doing regular backups but the backup copies don't include programs or the operating system.
its been a long time since i last posted about my bsod and after i fixed them i began to get more of these. the only way i can replicate the problem is when i move or copy+paste files in the computer, mostly if it is from my computer to a external hardrive or usb... i attached the latest minidump file i got 021412-15958-01.zip
Edit: Go another bsod... if it helps i uploaded the minidump from that crash 021512-21153-01.zip
I Image my C drive on the 2nd partition of the same drive. I then copied the image to an external drive. If I lose my drive that my C drive is on and then replace it with a new drive can I Image from my external drive to the new Hard drive and it will be the same size and make? The reason for this question is my image will be coming from a different drive than it was image to.
My computer crashes every time I transfer large amounts of data onto the D drive of my computer. There is no such problem with my C drive.
First detected this problem while I was transferring some data through LAN. This problem occurs even when I am copying data from my C drive to D drive. I was able to copy a 700MB file onto the drive.
Windows 7 64 bit SP1 - Clean Install. I have found an incredibly annoying problem. I have external USB drives on my laptop, both esata and USB 3. I store a lot of HD video clips that I take on them. It is very important that I set the sort order to Date Created (due to the naming convention on my camcorder). Before doing a clean install from Windows 7 64bit to Windows 7 SP1 64bit, if I changed the order in explorer it quickly changed and then remembered the sort order, so next time I went into the folder on my external drive the files were in the correct order.
Now, whenever I go into the folder it takes up to 5 minutes to sort the files (there are some 4000 files in the folder). If I go to other folder on my laptop, then back to that folder, it takes another 5 minutes to sort them again! At the moment I am tempted to go back to pre-SP1. I have taken the external drive to another laptop i have with SP1 on it, and it does the same thing. I can't wait around for windows to re-order my files whenever I go into that folder, especially as it takes such a long time.
I created an image using the Microsoft Backup and Restore tool in Windows 7. I saved the image on a network shared folder.I then went to the Advanced Recovery Methods in Windows to restore my image...that I just created. It restarts the computer and goes into recovery mode, I point to where the image is located, I entered the network credentials and it give me an error. "The Specified network resource or device is no longer available. (0x80070037)"
I have problem, recently all new folder are created optimized for video content with big pictures and such. How can I fix that so they are created as normal folders, because this is driving me nuts having to change this for every new folder.
I created a 20gb partition on my external hard drive and no longer require the partition. It is currently unallocated space so I want to format it into NFTS. Using computer management the partition was selected and and I went through the steps to format but i keep on getting an error message saying there is not enough space on the disk to complete this operation.
One directory (Directory A) containing the same files as Directory B but with the wrong Date created / modified attributes.how to make all the files in Directory A have the same date created/modified attributes as Directory B.
At present I use Vista and will be upgrading to Windows 7 o/a 22 Oct.
My total C & D drives use 110 GB so I would like to puchase something in that area and it would only be used for emergency backup. I have looked at several but I noticed that all of them only function with XP & Vista and no mention of Windows 7.
I would appreciate a recommendation that will function with Windows 7.
My folders on my hard drive are hidden (the only way I can view them is through Folder and Search Options in Organise). I can not unhide. See this picture for details (it shows ONE of my folders in my Hard Drive that is hidden): Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting.How do I unhide these folders?
I understand that by right clicking on the sorting bar you can choose and add dozens of ways to sort your files. How do I apply one (Date Accessed) not just for one folder, but for on the folders on my drive?
I have been using a commercial company to back up my computer for the last 2 years. Now I have decided to do my own backups. I already did the first back up to the external drive. Now its time to back up again, when I back up again, will everything be backed up again? Or just the files that have changed?
When I click into my IE8 Favorites, my HD folders are appearing there. I did some tests and if I try to delete them, my original HD files are deleted.
Maybe it happened when I tried do bring back my favorites from my backup files (ex Win XP), and I think that IE8 added all folders of my c: hard drive instead of only my favorites bookmarks.
I have 465gb of files and folders on a 500Gb hard drive that needs to be cut/pasted higher in the folder hierarchy.
Here's a visual:
The reason this happened is my HD broke down and I had to send it to a company (ChronoDisk) to extract the information to another HD. This is how they sent it.
I need to move those files because the path used by many programs/files are broken. Is it possible to do this without actually cut/pasting? My guess is it might crash half way or simply not work at all because there is not enough empty space to make a cut.
few folders in my external hard drive are missing. I am running a scan and hopefully it'll fix, but it takes so long to scan the hard drive as it's a 3 TB hard drive.
I have a system Image Backup of my C drive. It is located on a USB portable drive. I want to rename this backup. If I do rename it and later need to use it will I have problems?
That is, I renamed the folder from WindowsImageBackup to WindowsImageBackup_2009_11_03. If I ever needed to use it to restore a file, I'm supposing I can just change it back to WindowsImageBackup and all will be well. But this is a supposition on my part. I would like to find out now if there are problems, rather than later.
I am a little concerned because Windows 7 seems to be picky about the MediaID file. I wonder, for example, if I mount the backup after giving the WindowsImageBackup the new date specific name, I say, I wonder if this is going to affect MediaID. My nightmare is to think I am set up in case of an emergency, only to find that something like this is not in place.
I recently had much trouble with my computer and was reinstalling OS many times! XP and windows 7. When I was installing windows 7 there were 3 virtual drives one about 400 mb named windows reserved and 2 others each (300gb) the 3d one was backup. I formatted first 2 deleted partitions, made 1 partition formatted again and then installed windows. The 3d virtual hard drive backup disappeared with all my stuff. Now I just have Local disc C: which is 300 gb and nothing else. So I am missing 300gb virtual hard drive with my stuff, where did it go?
Computer is Inter (R) Core(TM) i3 CPU 530@2.93GHz MSI Motherboard H55M-E33 Hard drive WDC WD6400AAKS-00E4A0 ATA Device
I am running "windows backup and restore" on one of my external hard drives and WDsmartware (western digital software that came with my other external drive). WDsmartware eats up WAY to much resources. Would I be better off just using "windows backup and restore" for both drives? are there any free programs out there that are "better' than windows 7 "backup and restore"?
I'd like to automatically backup certain folders to an external hard drive every time it's plugged in. I've tried Windows 7 Backup tool but it creates an icon and I would like the folder to be able to be navigatable (for the reason that I need to know what has been backed up and what hasn't, also I don't want to restore an entire folder at times, sometimes I just want to restore a couple of files).
How can I make this happen? Using either Windows 7 backup or another tool