BSOD Copying Large Folders To New WD 3TB Internal Drive
Jul 27, 2012
Just bought a new cyberpowerpc from Fry's, installed a 3rd hard drive (Western Digital 3TB). Everything seems okay except when I try to copy any large files/folders to the new drive. I'm using a folder that is 11.3GB with 686 files. I can copy it from drive 1 to drive 2 no problem. When I copy it from drive 1 or drive 2 to the third drive (the 3TB one), it will start copying then sometime soon after, explorer will close itself down and the computer will end up rebooting itself. Sometimes there will be a BSOD and sometimes it will just reboot without the BSOD.
I have tried to attach the dmp files etc...using the recommendations of the forum. I'd like to use this new drive for backups (it's the reason I got a new pc, my old one crashed and I didn't have a good backup system).
I am at my wits end with using windows 7. I am sure this must have been beaten to death on here and I am sorry but I am not sure how to word it to search for the answer.I hook up a spare HD to the USB with the same operating system and every ******** file I try to open on it I have to adjust it for administrator and da da da and I am sick of this, it will take forever to look at the data. How the heck to I fix this once and for all so I can just open what i want to ? I am the administrator...I don't want to be flagged about administrator anything any more.Secondly, if I want to back up data on a stick and there is already a folder of the same name it asks me if I want to merge it. No I dont so I change the name of the file to something different and it STILL always tells me there is a folder that has the same name do you want to merge i
I've just recently realized that copying folders to a backup hard drive resets their "created" date. Should my computer ever crash, all my backup files will state to have just been created on that certain date. Me, being the organize-freak I am, have been looking for a solution so my backed up files can have the same time stamps as on my computer right now. I've done a little searching, and have found that people always recommend Robocopy. Problem is, I can't understand a word of the tutorials. How to run Robocopy to carry out what I want? And also just for the heck of it, is Robocopy the only solution? Is there some sort of back up program on Windows 7 that can do that?
I just spent like 18 hours copying 600K files, 1.33 TB, from a USB 2.0 ext. drive to a 1.36 TB USB 3.0 partition, but at the very end I got a handful of prompts to replace folders that already existed in the newly created folder, asked me to merge the original folder with the one just copied on the destination drive, eventually asking for permission to replace thousands of items and that's what it's doing now. I don't know what's going on. It appears that all files are there in both folders on each drive (with the exception of half a dozen that wouldn't copy due to long filenames).
Nearest I can guess is it is writing DOS names in addition to Windows names so the computer is going to spend more than a dozen more hours doing that. Windows Explorer copy wrongly offers to merge folders Windows Explorer copy wrongly offers to merge folders. The folder being copied that is being merged is called Drive(D), probably from a backup of Win 98SE being restored onto a Win XP machine, so it may resemble a system folder to Windows 7.
I need some direction (or reassurance) about setting up a new Win 7 system using an older Win 7 user folder.I had Win 7 Ultimate on an HP with the user folders on a separate internal drive. The HP died; the drive with the user folders is intact.his user folder has almost 400 GB of data that we need to keep as is. (My wife's a video producer with several projects in work.)I bought a new Lenovo with Win 7 Home Premium. I set up user accounts (on the system drive) and then added the drive with the HP user accounts. I made the necessary registry changes to access the added drive for user folders. Upon booting, I checked the properties of my user folder on the drive I added and it reported 0 bytes!! I didn't want to risk losing that data so I shut it down. My original user folder still has everything I want and need.
I know the user folder has data for my applications. Is there data in the user folder specific for the computer I'm on? If so, what do I merge from the Lenovo user folder with my big user folder? If not, was the "0 byte report" a fluke?Also, would I be better off installing all my applications before incorporating this big user folder? I have not yet installed the Adobe software that will be using most of the data in the user folder.
its been a long time since i last posted about my bsod and after i fixed them i began to get more of these. the only way i can replicate the problem is when i move or copy+paste files in the computer, mostly if it is from my computer to a external hardrive or usb... i attached the latest minidump file i got 021412-15958-01.zip
Edit: Go another bsod... if it helps i uploaded the minidump from that crash 021512-21153-01.zip
how to move all my files from my internal harddrive to my external harddrive. Everytime I try to transfer my files it will transfer for like 1GB and then it will freeze and restart.
I have 2 internal-sata hard drives(320 gig. And 2tb.) and 1 external usb/2.0 hard drive (750 gig.). The pc is an old dell gx520 tower with a fresh install of Windows 7 pro. No antivirus, network connection, or firewall enabled. Processor is a Pentium4 running 3 GHz with 1.5 gigs of ram. This is the problem: If I do a search on the 2tb. Drive for all of the jpegs, I have a total of about 84000 pictures. When I select all of the pictures and right click-copy and try to paste to another hard drive the pc will lock up and won't display a copy status window. Windows says it's not responding. Now, if I right click-copy a single folder which has anywhere, from a few files to several hundred gigs. of data in it, using the same 2tb. Drive, it will copy over to another drive just fine. I have tried, changing the swap file from "windows managed" to, up to 20 gig. Thinking the search was maybe having to write to the swap file. This didn't work. I also booted in to safe mode and tried to do the copy from the 2tb. To the 320gig. drive and still no difference. I have tried this with windows copy handler and teracopy. It all has something to do with the fact that I am doing a search for the files before copying them.
Everything is so slow e.g. opening of FireFox, opening of Excel, opening of Task Manager etc. While I'm copying 750GB of data from one partition to another partition, why? I'm running Windows 7 x64 7100 on a separate partition and I have a Q6600, 4GB ram and 5 X 1 TB WD Black edition drives...Task Manager is showing 33 running processors, 3 - 5 % CPU usage and 1.35GB of ram usage. Is this a Windows 7 bug? Windows 7 is super fast when I'm not copying/transferring large files between partitions!
I've set up a back up batch file to copy my Documents, Pictures, Music, and Videos folders from my computer to an external hard drive. However, while running the Documents backup, it seems to find, the pictures, music, and videos folders all inside the documents folders labelled "My Music", etc. However, these folders do not exist. When I navigate in explorer to C:UsersusernameDocuments I cannot find a folder labelled "My Music". When I try to navigate to C:UsersusernameDocumentsMy Music it tells me that "access is denied". I cannot find them through command line either. As well, when I try and find the folders on the backup drive, they do not seem to be there either.
If I have deleted a folder that is too large to fit in the recycle bin where would I find it? And also how would I go about restoring it back to its original setting?
I would like to open all my photo folders in Extra Large Icons. And the rest of my folder in List. Is there a way to do that and make them open that way all the time.
i built myself a new computer recently and although it's not the first one i've ever built, i'm certainly no expert. i was getting lots of BSODs right from day 1, but when i swapped out the PSU for a larger one, everything seemed ok. but when i started copying all my stuff onto the hard drives i started getting BSODs again. whenever i transfer more than a few GB of data, either from one HDD to another, or from a DVD to a HDD, the computer bluescreens. a BSOD will happen out of the blue, even if im not actually doing anything, but transfering more than 4GB or so of data is guaranteed to give me a BSOD. i tried various diagnostics like memtest86 but everything comes up fine. but when i swapped the system drive for a different hdd with linux, transfering data works fine. so i'm fairly certain it's either some element of windows or the ssd that windows is installed on.
I often get random BSOD's when copying files to an external USB device. I haven't been able to tell what's triggering them. It can be a large group of files or sometimes even smaller files, so don't know if it's related to file size Am unfamilar with troubleshooting BSOD's.
Before I even go further: yes, the "hide empty drives" has been unchecked)I had to reinstall my machine and I was able to to see the drive letters for the internal flash card reader. However I think something might have gone wrong when I give my external HDD a drive letter that was held by one of the flash card reader).I wrote "I think" because I am not really sure since I never wanted to use the internal card reader till today so I never noticed there was an issue. Anyway, the internal card reader does not show up even when I insert a card in the reader. Basically nothing happens. I have uninstalled the "USB Mass storage device" and it gets installed without any issue but the problem is still there: I can't see the reader. the INTERNAL flash card reader has a USB slot and when I insert a EXTERNAL flash drive, the EXTERNAL flash drive shows up.
I have been suggested to keep my data in a separate drive than my operating system.
Actually, my hard drive is partitioned in two drives, c: and F:
I want to transfers my directory c:user to f:user. I did try to copy between them, but some files where not transferred
So what is the best way to do that. After, do I need to do special thing to make sure that all the references will be followed to the new files positions, IE when accessing them via my task manager
System build 11 months ago Windows 7 Pro x64 Full Retail AMD Phenom II X6 1090T ASUS M4A88T-V EVO/USB3 (AM3) 16.0 GB Dual-Channel DDR3 @ 666MHz (9-9-9-24) AMD Radeon HD 6950 250GB M4-CT256M4SSD2 ATA Device (SATA-SSD) (OS) 1954GB SAMSUNG SAMSUNG HD204UI ATA Device (SATA) 1954GB SAMSUNG SAMSUNG HD204UI ATA Device (SATA)
I get BSOD sometimes when playing Battlefield 3, sometimes I don't get it. I also get BSOD when transferring large files from external hard drives or from my internal network.
Why do files moved to an external drive not behave the same as those same files in an internal drive? I noticed that if I do anything to a file that is in an external drive, that file can not be saved under the same name (read only). In order to do so one must save it internally and then copy or move it to the external drive.So I did just that--I copied a file from taken from an external drive, saved it in the internal one and then copied it back to the external one. Now if I r-click the propeerties of these 2 same files and then go to the 'Security' tab a difference is immediately apparent: The internal one has -1- System & -2 My-computername (user-PCuser and -3- Administrators (user-PCAdministrators) with all 3 accounts allowing all (full control, read, write, etc..). While the external drive has in Properties; -1- System -2- Administrators (user-PCAdministrators) and -3- Users (user-PCUserrs) with this final 3d one (and different one) with no Allow for "full control, or modify or write. So how does one have all its files in this external drive behave and be equal to all the same files in the internal drive?Since -3- Users (user-PCUserrs) in the external drive is that which is differnt from the internal drive I was wondering if it is OK to delete this Permission or 'attribute' or whatever it is called and create instead one equal to the one in the internal drive -3- Administrators (user-PCAdministrators)? ANd of course doing so in one go and not file after file after file individually?
Why do files moved to an external drive not behave the same as those same files in an internal drive? I noticed that if I do anything to a file that is in an external drive, that file can not be saved under the same name (read only). In order to do so one must save it internally and then copy or move it to the external drive. So I did just that--I copied a file from taken from an external drive, saved it in the internal one and then copied it back to the external one. Now if I r-click the propeerties of these 2 same files and then go to the 'Security' tab a difference is immediately apparent: The internal one has -1- System & -2 My-computername (user-PCuser and -3- Administrators (user-PCAdministrators) with all 3 accounts allowing all (full control, read, write, etc..). While the external drive has in Properties; -1- System -2- Administrators (user-PCAdministrators) and -3- Users (user-PCUserrs) with this final 3d one (and different one) with no Allow for "full control, or modify or write. So how does one have all its files in this external drive behave and be equal to all the same files in the internal drive? Since -3- Users (user-PCUserrs) in the external drive is that which is differnt from the internal drive I was wondering if it is OK to delete this Permission or 'attribute' or whatever it is called and create instead one equal to the one in the internal drive -3- Administrators (user-PCAdministrators)? ANd of course doing so in one go and not file after file after file, individually, would be ideal.
I'm being a little lazy and I know the answer already, but I'm asking anyway in the vain hope.....
One of my HDD's is failing quickly and I 'suspect' that it's the current drive that the beta is installed on (although I'm still not certain) and rather than go through all the nuisance of partitioning / installing on another drive, is there a way to copy the current install (6801) holus bolus to another drive and repair / modify the boot records / registry to make it function?
Alternatively, could I make a bootable image and use that to re-install on a new drive? I've never created an 'image' so that's new territory for me.
As I said, I doubt it's possible but as I've already spent days 'setting up' 6801, I really don't feel like doing it all again so soon, but the way my rigs been acting up, I may not have a choice.
(I've already installed a total of 5 fresh installations in the last couple of days and it's getting time consuming and tiresome)
Tech Support Guy System Info Utility version 1.0.0.2OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bitProcessor: Intel(R) Pentium(R) CPU B970 @ 2.30GHz, Intel64 Family 6 Model 42 Stepping 7Processor Count: 2RAM: 6068 MbGraphics Card: Intel(R) HD Graphics, -1988 MbHard Drives: C: Total - 595370 MB, Free - 531224 MB;Motherboard: TOSHIBA, Portable PCAntivirus: McAfee Anti-Virus and Anti-Spyware, Updated and EnabledCan I make a reliable "ghost copy" of my hard drive that could be copied into a new hard drive. I have a separate external hard drive doing regular backups but the backup copies don't include programs or the operating system.
I have a folder called Mystuff on the Desktop which contains all my files. I try to copy to a folder named Backup on Drive D, but it wants to copy only files that have changed since my last copy.I have tried doing a 'send to' to Documents but it does the same thing. How can I copy all files in the folder to Drive D then to USB Drive H? It seems I was able to do this up until recently has something in WIN 7 changed?
I'm trying to transfer my boot drive/c: drive to another disk (actually, a raid 0 array of x2 500Gb disks) by creating an image of it, and i'm having trouble doing it using the system image recovery profram within W7. Can this actually be achieved or do I need to use a third party program?
I don't have Windows 7 yet, but I'm just about to install it, but I figure it may be safe to do a back up first. I'm about to do an upgrade from Vista 64-bit to Windows 7 64-bit. I did find these recommendations:"An image backup of your hard drive offers an easy, dependable way to do just that, since it restores everything on the hard drive: Windows, applications, data, and even the Master Boot Record. To create one, you'll need an external hard drive, and an image backup program.
i tried last night and installed it on D drive, it's about 9.6G.but C DRIVE about 12G after i turn off hibernation and deleted the window old folder. it's so strange. is there any hidden folder to be deleted manual but i don't know?
I want to know if I can copy a short movie I made using pinnacle to a usb flash cruzer4gb? and how to do it? Or is there any flash drive that will copy a movie?
If you extract the icons from imageres.dll or shell32.dll then the maximum icon size is about 64x64 and 32x32 for most icons. I am trying to extract the largest icons, where can I get them.
