i tried last night and installed it on D drive, it's about 9.6G.but C DRIVE about 12G after i turn off hibernation and deleted the window old folder. it's so strange. is there any hidden folder to be deleted manual but i don't know?
View 2 Replies
my windows 7 (32bits) folder on the C drive is too large (21.1 GB) is there a way to clean it up?
I have deleted temp files and also run the commands:
cleanmgr sageset:99 (Check all the boxes)
cleanmgr sagerun:99
still the same size.
I have been suggested to keep my data in a separate drive than my operating system.
Actually, my hard drive is partitioned in two drives, c: and F:
I want to transfers my directory c:user to f:user. I did try to copy between them, but some files where not transferred
So what is the best way to do that. After, do I need to do special thing to make sure that all the references will be followed to the new files positions, IE when accessing them via my task manager
I clean installed Windows 7 on my HP Pavilion DV6-6C35DX laptop using these 2 guides: SSD / HDD : Optimize for Windows Reinstallation Clean Install Windows 7
I noticed when I was installing Windows 7, I never had a screen pop up (step 17) asking about my network location type. After Windows was installed, my laptop couldn't find any networks regardless if I tried plugging an ethernet cord from my modem into my laptop. When I click troubleshoot it says, "Install a driver for your network adapter". I click next it says, "Windows could not find a driver for your network adapter". I look in my Device Manager, I see under Other Devices it lists: Ethernet Controller, Network Controller, PCI Device, SM Bus Controller, Universal Serial Bus (USB) Controller, Universal Serial Bus (USB) Controller, Unknown Device, and Unknown Device all with yellow exclamation marks next to them.
My Googlefu skills told me that when clean installing windows it only installs generic drivers, and I need to install the drivers on my motherboard disk. The problem is my laptop didn't come with any such disk. I tried going on HP's website on another computer, and burning all the network drivers onto a blank DVD ( can't use a USB since those drivers are not working). When I installed them nothing really happened.
specs are im getting all this info right off the system info)
Processor: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00 GHZ 2.00GHz
Installed memory(RAM): 3.00GB
Sytem type: 64-bit operating system
Hard drive - 80GB
Motherboard: Desktop board media series intel DG33TL
I just clean installed windows 7 ultimate 64-bit i have tried 32 bit as well but i have had no difference in booting up i did not install anything yet as the boot up is very slow i have tried different hard-drive as well i have 2 80 GB hard drives one is maxtor and one is WD both are IDE...i disconnected everything extra that i had on my comp like Nvidia Geforce GTX 460 video CARD using on board video card i had a wireless card installed took that ooff as well took off the extra fans i had. Previously i had windows xp installed and it working very smooth so i have no clue what can it be as there is no virus before i installed it i had cleaned it up and installed it clean.
If you extract the icons from imageres.dll or shell32.dll then the maximum icon size is about 64x64 and 32x32 for most icons. I am trying to extract the largest icons, where can I get them.
View 14 Replies View RelatedMy client's computer was infected with a virus obtained via Facebook. I removed this and multiple other infections (and I'm pretty thorough with my scanning). She gets it back, starts working on it, and apparently her devices and printers icons are blank. Not missing, like with a "blank page" icon, just... blank. Here's the kicker: it only happens with large and extra large icons. It also happens with normal folder icons. When I change it to medium or lower, they come back. I've tried rebuilding the icon cache database several times, tried sfc /scannow, tried chkdsk, tried uninstalling any recent updates, etc... There have been no hardware changes, the hard drive has been tested as good (no bad sectors), her dual monitors are at a sane resolution, and I'm confident that the viruses has been removed.
View 6 Replies View RelatedThis is my set up. I have my PC running Windows 7, connected through wireless to the internet and my home network via Apple Airport Extreme. I have a harddrive connected to the Airport Extreme acting as a network drive.I can see the network drive, and I pull files of all sizes from it, but I have not been able to push large files to it. I can push smaller files to it with no issues (so far success with up to 706MB). I tried pushing a 1.4GB video file to it and it keeps giving me the error message: "There is a problem accessing A: Make sure you are connected to the network and try again" I have an iMac hooked up to the network. I can push the same 1.4GB video file from my PC to the iMac over the wireless network. I just cannot push it onto the network harddrive. While I have no problems pushing large files onto the network harddrive from my iMac.So in summary:Pushing large files from PC to network harddrive - FailedPushing large files from PC to iMac - SuccessPushing large files from iMac to network harddrive - Success I've tried most of the proposed solutions I found on the internet. 've turned off the firewall - no change. I've turned off my anti-virus - no change. I've tried disabling autotuning - no change. I've turned of the power setting on my network adapters - no change
View 1 Replies View RelatedJust bought a new cyberpowerpc from Fry's, installed a 3rd hard drive (Western Digital 3TB). Everything seems okay except when I try to copy any large files/folders to the new drive. I'm using a folder that is 11.3GB with 686 files. I can copy it from drive 1 to drive 2 no problem. When I copy it from drive 1 or drive 2 to the third drive (the 3TB one), it will start copying then sometime soon after, explorer will close itself down and the computer will end up rebooting itself. Sometimes there will be a BSOD and sometimes it will just reboot without the BSOD.
I have tried to attach the dmp files etc...using the recommendations of the forum. I'd like to use this new drive for backups (it's the reason I got a new pc, my old one crashed and I didn't have a good backup system).
This is my set up. I have my PC running Windows 7, connected through wireless to the internet and my home network via Apple Airport Extreme. I have a harddrive connected to the Airport Extreme acting as a network drive.I can see the network drive, and I pull files of all sizes from it, but I have not been able to push large files to it. I can push smaller files to it with no issues (so far success with up to 706MB). I tried pushing a 1.4GB video file to it and it keeps giving me the error message: "There is a problem accessing A: Make sure you are connected to the network and try again" I have an iMac hooked up to the network. I can push the same 1.4GB video file from my PC to the iMac over the wireless network. I just cannot push it onto the network harddrive. While I have no problems pushing large files onto the network harddrive from my iMac.
So in summary: Pushing large files from PC to network harddrive - FailedPushing large files from PC to iMac - SuccessPushing large files from iMac to network harddrive - SuccessI've tried most of the proposed solutions I found on the internet. I've turned off the firewall - no change. I've turned off my anti-virus - no change. I've tried disabling autotuning - no change.I've turned of the power setting on my network adapters - no change. I've turned off the Remote Differential Compression - no change. I've tried the file transfer in Safe Mode - no change.
I got windows 7 ultimate 32bit free from my school, and decided that I wanted to clean install, and not upgrade it. I transferred all my files off, booted the laptop up with the windows 7 disk, and proceeded to clean install. I didn't have the drivers cd for my laptop, but I just wiped my drive and installed 7 anyway. Now I have windows 7 ultimate 32bit, and can only use 3 of my 4 gigabytes of memory.. The thing I don't really understand is the whole upgrading option, and like, I know that it's a windows 7 32bit dvd, but it doesn't seem right to go from 64bit to 32bit. So is there anyway I can make it 64bit without having to buy a new dvd? And if not, how much am I missing out on, with not having 64bit, especially with having 4 gigabytes of ram?
View 1 Replies View RelatedI need to know how to transfer my large music collection from Windows media player to my external hard drive?
View 1 Replies View RelatedI have a 1T SATA system drive and a 1T SATA working drive. I installed a 3T SATA storage drive, and now my system won't boot from the C:. I have to go into the BIOS and boot from there, or use a boot disk. How do I get the system to boot from C: again?
View 3 Replies View RelatedI have a partition question and after scouring the Web, can't find anyone with the exact same situation as mine. Basically what I'm wondering is if I can delete a primary partition and then extend another, non primary into that space.
Here's what I have and why I want to do this: my laptop came from the factory with one 500GB SATA drive, split into two partitions (C, primary, and D, logical, each 250GB). The Win7 install was on the C drive. Recently, I installed a 120GB SSD as a second drive, and using the tools with it, copied the contents of my existing C partition to the new SSD, and then made the SSD the boot drive labeled as the C drive. So far so good, everything works fine.
Now, what I'm left with is this: C: 120GB (SSD, now the boot drive with the Win7 install) D: 250GB (SATA, the original D partition, Disk Management IDs it as a logical drive, extended partition) E: 250GB (SATA, the original C partition, Disk Management IDs it as a primary partition)
So, I have the original "C drive" on E now... it's no longer the system/boot drive. Obviously I don't need the files on it as they are all on the new SSD. What I want to do is to delete all those files and then combine what's on D and E into one 500GB D drive as I have no reason to have the two partitions. Is it possible to just delete the E partition and then extend the D partition into the unallocated space? I'm confused because it seems as though the D partition may rely on the E partition being there since the E drive IDs as primary. Or would the D partition become primary?
I know I could just back up the D partition to an external drive, delete both D and E partitions, and reformat as one new D and restore the files, but I don't want to create more work for myself if I don't have to. Obviously I don't want to mess up the files on the D drive though, which is why I'm asking.
i recently installed windows 7.. it had only 2 drives c: and d: .. i need to partition d: drive into 3 partitions. is it possible?
View 4 Replies View RelatedMy c drive got only 1 gb of space free. I have cleared all the usual suspects like music, downloads, idm download folder. I have even run ccleaner. But still its showing 1.5 gb free. Now I don't know what else is taking space. How can I know which other folder is taking up space.
View 2 Replies View RelatedI have laptop and I want to clean the dvd drive and the lens of lazar , is it by some cotton and alcohol?
View 2 Replies View RelatedI have Windows 7 rc running on one of my 2 ide drives, with XP on an SATA drive - dual booting.
I purchased a 500gb SATA drive to replace the the 2 ide drives
The plan is to:
- connect the new drive while shutdown
- boot into XP
- Partition new drive, with the first partition active(with partition Magic).
- Transfer non-OS partition data to the new ones
- shut down and disconnect the ide drives
- insert Windows 7 disc and perform install on first partion of new drive.
I understand that the MBR is on the Windows 7 partition.
Will I have any problems with the XP install, or will the new Windows 7 install create a new MBR to allow dual boot?
I know I'll have issues with drive letters. But other than the XP, and Windows 7 partitions it's just data - no programs.
Or, are there any other problems you see with my procedure?
I have windows 7 as of late and everyday, more then once a day I get the low disk drive D warning. I have clicked thru the deleting of recycle bin, which it always says there is nothing in it. I have dfragged both C and d drives. Still same thing
View 3 Replies View RelatedI'm running Windows 7 and keep getting a message that my D Drive is running out of space. In fact when I look at the drive it shows about 2% spare capacity. I know it's a backup and recovery system but have an external backup system and just want to empty the drive and get rid of the message.
View 1 Replies View RelatedHow do you clean up D drive on windows 7
View 3 Replies View RelatedHow do I clean up my D Drive onmy notebook? It is almost full. I have nothing important stored on this notebook.
View 1 Replies View RelatedIs Windows 7
- x64 ?
- the original installed OS on the system
- full retail version
- What is the age of system (hardware)? approx. 1 year, ssd drive new
- What is the age of OS installation (have you re-installed the OS?) clean install
I have recently (4 days ago)aquired a new Crucial 128Gb ssd drive and performed a clean installation of windows 7 64bit, since then i have been experiencing random BSODs (3 times so far)All software is genuine. Have performed full malware and antivirus check. Results are clean.
I guess Toshiba comes with a back up on hard drive but I seen have two recovery patrons. One is from Toshiba one from recovery CDs when last I recovered. So if reinstall must I do oem clean install or should I just recover to ordinal do I delete old recovers? I don't want break it. Laptop windows 7 is there anyway recover windows files with out deleting anything ? Or can you create new Partion install clean windows on there transfer files then delete current Partion then resize new. So you have two windows at same time. Is bad not format I mean can I install Linux change mind or is installing on HD a serious issue.such as don't over do it. I'm texting from phone sorry I'd errors this odd.I want learn more about windows and Linux want make sure its not going mess up computer to toy with operating systems maybe make a bunch for fun.
View 8 Replies View RelatedI own Windows Vista 64bit, and have ordered Windows 7 Professional 64bit upgrade. How do I do a clean installation of Windows 7 on a new hard drive?
View 7 Replies View RelatedI want to do a clean install of my purchased Windows 7 from Windows 7 RC. The problem is I have a lot of data that I want to keep and since it is about 500GB in size, i have no cheap way of backing it up (obviously considering buying another HDD, but i'd rather not for now). I was thinking that maybe I should partition my 1TB main HDD into 2, and transfer all my data over to new partition, format/clean install the old one and lastly merge the partitions. Is this possible?
View 5 Replies View RelatedI'm trying to do a clean reinstall, but I can't reformat the drive. I don't get very far, menu 'where do you want to install window', which is supposed to have a Format option, it doesn't!
View 7 Replies View RelatedI'm doing a clean install on my computer, and it's going alright until it asks me to choose which hard drive I want to install Windows 7 on. Apparently I have 2: a C drive and a D(Recovery) drive.What should I do in this situation? Should I just install on the C drive, or should I do what it says here: Partition the Hard Drive in a Windows 7 Install and delete the partitions and create a new one.
View 7 Replies View Relatedi was just wondering how i extract the files from an installation disc onto a flash drive, so i can use the flash drive to perform a clean install.Extract Files from Windows 7 Installation DVD.i already looked at this but it wasn't specific to my uses.
View 3 Replies View Relatedi was wondering if anyone has any programs they could recommend to use to wipe a hard drive clean before reinstalling windows 7, I noticed you have this CCleaner 3 link on here CCleaner - Download.com If i put that on a disk and started it up as i would to reinstall can that wipe the disk clean?
View 9 Replies View RelatedI have a Core 2 Duo PC with 2 SATA internal drives:
Seagate 320 gig, with C and D partitions. C contains a legit retail upgrade version of Vista Home. D is for data.
Western Digital 640 gig, with a single E partition, currently used as backup.
I ordered a Windows 7 Home Premium retail upgrade at the discounted price a few months ago and expect it in a month.
My Seagate drive is running low on space and I want to retire it. I would like to boot to the Win 7 DVD, have my Vista install on the Seagate recognized, and then do a clean install of Windows 7 on the Western Digital drive, currently E.
I hope to buy another considerably larger backup drive shortly to replace the Western Digital as a backup drive.
Will the WD drive be available as a location for the installation in these circumstances?
Any previous time I have installed MS operating systems, I always chose to install to the same drive as the existing OS. This time things are different due to little space on the Seagate drive. Windows 7 would certainly fit on my current C, but I want to retire that drive.
Or will this remain a complete unknown until some time after October 22?
Or will I be forced to install to the Seagate and then somehow migrate the install to the WD?
I have not played with the RC, so I don't know what options are normally presented during the install.
