Installed New SSD Boot Drive, Want To Repartition Existing Drive
Mar 23, 2012
I have a partition question and after scouring the Web, can't find anyone with the exact same situation as mine. Basically what I'm wondering is if I can delete a primary partition and then extend another, non primary into that space.
Here's what I have and why I want to do this: my laptop came from the factory with one 500GB SATA drive, split into two partitions (C, primary, and D, logical, each 250GB). The Win7 install was on the C drive. Recently, I installed a 120GB SSD as a second drive, and using the tools with it, copied the contents of my existing C partition to the new SSD, and then made the SSD the boot drive labeled as the C drive. So far so good, everything works fine.
Now, what I'm left with is this: C: 120GB (SSD, now the boot drive with the Win7 install) D: 250GB (SATA, the original D partition, Disk Management IDs it as a logical drive, extended partition) E: 250GB (SATA, the original C partition, Disk Management IDs it as a primary partition)
So, I have the original "C drive" on E now... it's no longer the system/boot drive. Obviously I don't need the files on it as they are all on the new SSD. What I want to do is to delete all those files and then combine what's on D and E into one 500GB D drive as I have no reason to have the two partitions. Is it possible to just delete the E partition and then extend the D partition into the unallocated space? I'm confused because it seems as though the D partition may rely on the E partition being there since the E drive IDs as primary. Or would the D partition become primary?
I know I could just back up the D partition to an external drive, delete both D and E partitions, and reformat as one new D and restore the files, but I don't want to create more work for myself if I don't have to. Obviously I don't want to mess up the files on the D drive though, which is why I'm asking.
View 6 Replies
ADVERTISEMENT
Jan 2, 2012
I use an WD external hard drive (1TB) for additional storage and it was working fine with no issues. The small USB connector broke off the board yesterday and I purchased a new enclosure and installed it. Now my computer does not recognize it as a storage device. I have all the data still on the HD and really do not want to loose it. I tried adding a letter for the drive, but it does not show up to change the letter of the drive.
View 3 Replies
View Related
Nov 27, 2012
I have never created a partition in my hard drive before. It's full of corrupt files now and too small, so I'd like to undo the mess and repartition if possible. My Acer system is Win7 Premium 64 bit.
View 12 Replies
View Related
Oct 22, 2011
I have a desktop PC with confused partitions (see image below).
1) C: 62.50 GB NTFS (3 GB free speace, about 2%, that's a problem)
2) 8 MB unallocated
3) "Add to C2" 66 MB NTFS
4) 39.97 GB Free space
5) D: "Data" 195.54 GB NTFS
I'd like to combine 1, 2, 3, and 4 into one partition. And then repartition in a way that allows me to install Linux (two ext3 partitions? one for swap disk?).How can I do that? Is that complicated with GParted?
View 1 Replies
View Related
Sep 30, 2012
I have a 1T SATA system drive and a 1T SATA working drive. I installed a 3T SATA storage drive, and now my system won't boot from the C:. I have to go into the BIOS and boot from there, or use a boot disk. How do I get the system to boot from C: again?
View 3 Replies
View Related
Nov 24, 2009
I just installed a new WD 500 GB hard drive into my DELL computer. I am trying to install windows 7 from a dvd but it will not boot. Does anyone know what the problem is.
View 8 Replies
View Related
Dec 10, 2011
I recently bought a new hard drive with windows 7 home premium 32 bit installed. When tried to install it in my pc it would not boot up, I am assuming its because everything is new to it. I bought a windows 7 recovery disc but it has not worked. I did not get an install disc with the new hard drive.
View 5 Replies
View Related
Nov 13, 2009
I installed a Rosewell RC-217 Raid card (Silicon Image Sil 3124 SoftRaid 5 Controller-- in Device Manager). The card installed well in Windows 7 64 bit. No problems in device manager.The problem starts when i plug the drive in then rebooted. The boot stops at the 'Starting Window' and hangs. If i boot into windows then plug the drive in all work well. Windows sees the drive and i gave it a drive letter. works great.Problem is i can't boot my system without un-pluging the drive.
View 6 Replies
View Related
Dec 12, 2011
I have a computer with two (IDE ribbon cable) hard drives. One had a bad windows XP installation on it. I installed Windows 7 on the other. I formatted the drive before installing Windows 7.Then, I decided I want to use the hard drive with the bad winXP installation on it, in another computer (I will format it). When I opened the computer side panel, I wasn't sure which hard drive was which, so I unplugged the power to one, and started the computer.The thing is, it won't boot Windows 7 with either of those hard drives alone, only when both are plugged in. With HD #1 disconnected, it says "Can't find BOOTMGR, press a key to reboot." With HD #2 connected, I get asked whether I want Windows 7 or an older OS, and when I choose Windows 7, I get an error message, something like "Windows 7 failed to start. To try and repair, insert install disc, or use recovery mode, etc" With both HDs, I get asked the same question, "Windows 7 or an older OS," but when I choose Windows 7, it works. In my computer, I have verified that Windows 7's files are on one disk, and corrupt winXP files on the other.
View 8 Replies
View Related
Jan 21, 2013
I have a Machine with the Following Config:
Intel E2180 CPU
2GB Ram
Gigabyte GA-G31M-S2C Mainboard
Seagate ST31000340NS SATA Hard Drive Connected on SATA0
Operating Systems:
Windows 7 Ultimate 64Bit on HDD
Windows 7 Ultimate 32Bit Booting from VHD
I Installed Windows 7 Ultimate 64Bit onto Hard Drive as Per Normal Installation Onto the Hard Drive and Installation created 2 Partitions (1 System PArt and Another for C: Drive) Everything Works Great.m I Then Installed Windows 7 Ultimate 32bit Into a VHD. Setup Created a Multiple Boot Entry into the BCD so that when I Boot it Prompt Which OS I Want, I then Used BCDEdit to Change the Descriptions of the Boot Options "Windows 7 Ultimate - 64Bit - HOST" and "Windows 7 Ultimate - 32Bit - VHD" Everything still works Great.. No Problems.. Been Like this for a While Now and Perfect.
Now the Problem is that I Need to get some Data From and Old SATA Drive. I Shutdown .. Plugin the WD1600AAJS (160GB) into Another SATA Port (SATA1).. Turn Machine on and Press Delete to Enter Setup for Bios.. Goto Set Boot Device Priority and Ensure that the ST1000340NS Drive is at the Top (1st Priority).. Exit and Save Settings.. PC Goes through POST and Then Will not Boot.. it Gives "Missing Operating System" Shutdown Remove WD1600AAJS Drive.. Boots Perfect.. Reattach WD 1600AAJS Drive and "Missing Operating System" Tried Using "F12 to Select Boot Option" during POST to Select Boot Device.. Choose ST1000340NS ... and Still same Issue.. Remove the WD1600AAJS and Boots No Prob Off the ST1000340NS.
I thought that maybe it was the WD Drive.. so Tried another Seagate Drive.. and Same Issue..
I have set Every Available Option on The Bios to Choose the Boot Device and NOTHING Works.. I have Even swapped HArd drive SATA Ports .. still no Difference.
I have an Idea there is a problem with the BCD but I Cannot Edit or Add any thing to the BCD as it will not boot with the second drive attached. And When you edit the BCD it need the second drive attached to be able to Add a BCD Entry.
View 2 Replies
View Related
May 13, 2012
Asus cm5570-ap006 originally running vista premium and owner wanted an upgrade to seven. Bought a new hard drive b/c old one died. Mobo had trouble finding new drive but, after setting bios back to default(F5) it installed and finally got working.Owner gets pc and starts getting blue screening and saying theres an f1 drive error and wont wake up after suspending without reboot.So I get it running fine by removing avg(which is causing blue screen for some reason) and the it is now waking up after auto hibernation. But if you put into hibernation manually it wont wake. I update windows and it goes back to not recognising hard drive.Flash bios remove cmos baterry reset bios to default and set hard drive to ahcpi and it reinstalls fine update windows and it stops working. Use restore point to get it back and running and this time dont update windows and its running ok again. Shut it down for the night and the next day go to boot it up and there is no bootable media and now I am trying to reinstall Windows 7 and after it does it gets a no bootable media error even though it is
View 3 Replies
View Related
Oct 11, 2009
I recently isntalled windows 7 professional and I have three sata drives, one is the system drive where windows 7 is installed (C, my primary partition, the other is a storage drive (F and a drive to replace the partition (Z. My boot priority for the moment is the F: drive then the C:. This is because for some reason my C: drive, even though the system is installed on it, will not boot.
I tried several things like copying the hidden system folder in F:Boot to the C drive but that did not work. I recently did a repair install but that did not restore the boot manager. Is there a way to manually set my C: drive as my primary boot drive, without jumping through hoops, I bought the Z drive to replace the F drive and need to be able to boot without it.
View 3 Replies
View Related
Sep 28, 2012
First, the information as it is. I had a hard drive issue that I'm working on currently, trying to recover I suppose what is a crashed hard drive. There are tons of errors on it, but that's not the question I have right at the moment, but some background.
I have tried to reinstall Windows on a brand new 2.5" Seagate 500GB 7200rpm HDD. I formatted the drive using the windows 7 ultimate installer and booted it using a USB booter made from the windows 7 download tool.
When I booted it up and tried to get it going, it gave me a hardware error saying "Windows wasn't able to configure the hardware and try startup repair" or something to that effect. I read around and it said that since my BIOS says the HD is in raid configuration that it needed some Intel Raid driver, which I installed and tried running, but it didn't seem to work. It says now "windows cannot repair this computer automatically". The problem signature is as follows:
Problem Event Name StartupRepairOffline
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
[Code].....
Primary HDD in the BIOS is recognized as 500GB RAID is On as well. Trying to install Windows 7 Ultimate 64 bit.
View 5 Replies
View Related
Jul 22, 2012
New to the Tech forum boards but I am having a problem with my HP Pavillion dv6t. The hard drive went bad so I installed a new Seagate 1TB internal hard drive in the notebook. Starts up fine and then it says that "No bootable device found"---insert disk press any key. The disc is in the cd rom, I went into the BIOS enabled the CD/ROM boot option. I also went into the Boot option menu and tried selecting the internal cd/dvd rom drive option and I went into the actual boot order screen and adjusted the boot order so it read the cd-rom drive first then the hard drive. I also am using the HP Application and Driver recovery DVD. I am not sure if the disc is bad or cd drive is bad. The other thought is that because it is a brand new hard drive there is no information on it for the drivers so maybe the computer is not processing the information.
View 8 Replies
View Related
Dec 28, 2012
I am planning to replace my motherboard and memory on my Win 7 Home premium 64b. I've been updating MBs for 25 years and now I am getting conflicting answers regarding booting existing hard drive on new MB. My present Win 7 installation was installed on my present MB. Before I have always been able to use an existing hard drive and OS on a new MB.Now when I asked Gigabyte if a reinstall would be required they said no, but the registry may be full of unneeded drivers etc which would affect performance. This seems a solvable issue using registry cleaners and editors.But I am also getting opinions that Win 7 will not boot up on a new MB and reinstall OS would be required. Considering the number of programs, some on disks others from downloads. activation keys etc, this is a major problem.
View 9 Replies
View Related
Feb 22, 2011
Is it possible to take an exising backup of a single drive,and restore it to a newly created raid 0? As in, I have a 64gb SSD, it's backedup. I want to get another 64gb SSD,Will I have to re-install everything or can I just restore the backup and let windows find the proper drivers ?
View 3 Replies
View Related
May 8, 2011
how to reformat my drive c with existing Windows 7 and reinstall Windows 7 again?
View 5 Replies
View Related
Nov 25, 2012
My HP mini laptop has been distructed its program and the Swedish keyboard and word program turn up side down...I want to reboot or reformat so it will be in its normal program.
View 1 Replies
View Related
Apr 27, 2009
I'm trying to move my Windows 7 to a bigger and better hard drive.
My original idea was to create a system image and restore it to a different hard drive with windows repair (after all, this is what you would do after a hard disk failure). However, it only allowed me to restore the image to the original hard drive.
Any ideas?
View 2 Replies
View Related
Jan 4, 2013
External backup for 2 Windows 7 home computers.Prices are currently at a premium for a 2T 2 1/2" USB 3x external backup drive. I will retire the XP machine soon that is being replaced by the new Windows 7 machine. The XP machine has 2 drives--one of which is slower than molasses and you can hear the thing churning away when nothing should be going on (indexing off).I've never had much luck with diagnostic software--in particular PC Doctor when it was shipped with Lenovo systems.Is there, in particular, hard drive diagnostic software that really can diagnose a problematic drive?
View 2 Replies
View Related
Jan 25, 2012
Check my Hardware specs for full information
Current setup:
C: Boot, Corsair SSD
D: Files, samsung HDD
D:/boot files/user/(all user account directories moved here, when possible) I'm wondering if it's possible to install games such as Assasins' Creed or Skrym, but install all game data to this folder?D:/boot files/programs/* Many installers allow you to define a custom installation path, But I am unsure if these games would ask for one or force me to install to the default directory?
View 9 Replies
View Related
Jan 10, 2013
How can I move programs and files from my ssd boot drive to my data drive (Windows 7 x64 PC)?
View 3 Replies
View Related
Jul 25, 2009
I deleted my existing OS then created two new partitions on the same drive. Then I installed Vista on one partition and that partition was properly named "c" as ususal. Then I started Windows 7 setup.exe from a different hard drive and let Windows 7 install itself into its own partition. When I got to "My Computer" the Windows 7 partition was labelled as "I" instead of the expected "C" which had never happend before when I did the same thing.
Does anyone know a save way to label the Win 7 drive as "C" while in Windows 7?
View 9 Replies
View Related
May 29, 2012
My HP laptop HD crashed, am trying to replace it with a Kingston HyperX 120GB SSD. I do not have Windows installation disks, only have Windows Recovery Disks. All installation instructions I have found for SSD's is for cloning, which I cannot do since the HD is deadI have installed the SSD, booted into BIOS, this simple BIOS version doesn't allow me to change anything on the HD, but it does recognize it and let me do a HD test, so it does recognize the SSD. I then put the Windows Recovery disk in the CD drive, attempted to boot up, but the CD drive just spins and spins but never boots up. I thought the CD drive might be bad, so I tried an external USB CD drive with the Recovery disk, but it does the same (just spins). I even got a new Windows 7 installation disk (from another PC) to see if it will boot from it, but get nothing but a spinning CD I have not done anything yet to the HyperX SSD, haved not formatted or partitioned it.I thought this would be done by Recovery on the OS installationThe BIOS is set up to first boot from the CD drive, so the boot order is not the issue.
View 4 Replies
View Related
Dec 11, 2011
I was reinstalling Windows 7 on my friends computer after he was told by Dell he had a major virus and he needed a fresh install. With that being said, once the new installation was done, we noticed it was on the "D" drive (Recovery) and not the "C" drive.
View 1 Replies
View Related
Jan 6, 2010
I have a Samsung R519 laptop, after installing windows 7 the dvd drive is not working. It is not shown in the device manager. Sometimes after a reboot it does appear in the device manager and I have tried to do the repair as stated on other forums, (remove upper and lower filters), but on all occasions there has been no upper or lower filters shown in the right hand panel. I know it is connected ok as I re-installed Vista and now have both OS and the dvd drive works ok in Vista.
View 5 Replies
View Related
Oct 31, 2009
So I've decided that I want to use a Western Digital VelociRaptor 150GB for my Win 7 OS C-drive and my WD 500GB drive as my E-drive for files.
The problem is that I thought of this after installing it on the 500GB drive.
Will it be okay to reinstall on the new drive if I delete Win 7 on the old one?
If so, is it pretty simple to reformat a drive with an OS on it?
View 9 Replies
View Related
Nov 18, 2009
After installing Windows 7 on my laptop with great success, I decided to go for it on my desktop. I bought an Intel 160Gb SSD drive (S2 so I could use TRIM) and Windows 7 Pro. I did a clean install (obviously) and everything went well. However, for some reason, my PC (Self-Built w/ASUS P5K3 MB) does not power down when I exit Windows 7! The monitor goes dark, but the PC stays powered up.
If I put the Vista C: drive back into the box, it shuts down fine. I checked for BIOS updates on the MB from ASUS, but there is nothing Windows 7 specific, only updates for "newer CPUs".
View 5 Replies
View Related
Aug 28, 2012
Let me explain my computer to start with. Handmade from bare bones, windows XP SP3. I also have backup images (ghost, acronis, etc..) of the system. Then I installed Windows 7 to a second hard drive and had it set as a dual boot - worked perfectly.THEN...... I restored an HDD image made prior to installing Windows 7, and now, I do not get the dual boot options at boot up. Boots directly int XP as had in the prior HDD image. I still have Windows 7 on the 2nd HDD. How do I get to it, or set my boot drive to recognize the Windows 7 on the 2nd HDD. Or can I ever again boot off it?
View 5 Replies
View Related
Aug 7, 2012
My HP Pavilion DV7 4267CL's hard drive went out last week. I bought a new one, the same brand name and specifications. I installed the drive, turned it on, inserted the first disc, restarted it and follow the prompts. I selected to reset factory default and continue to follow the on screen prompts. After installing all four discs, it restarted by itself and gave me an HP logo. It ask me to restart to complete installation. When it restarted again, it gave me a bootmgr is missing press ctrl+alt+delete to restart. I pressed it and it gave me the same error again. I did all the reinstallation 3x but no luck. I was getting the same error. So, I went to the bio boot utility by restarting the pc and preesing F10 while booting. I rearrange the booting sequence, dvd/cd rom drive, internal computer hard drive restarted it, inserted the first disc, turned off pc and reinstalled it and all 3 other discs. But at the end, I'm still getting the same error.
View 4 Replies
View Related
Sep 9, 2010
I just added a new hard drive to replace the old one that is apparently corrupted. And I'm not sure what I did wrong. I was told to unplug the power supply and the old hd. Add the new one, and power it back up with the Windows 7 installation dvd. Did that and in trying to change the order in witch it boots to cd-rom, it shows sata hd not present? I don't know why, I replaced the cords in the right place. Do I need to configure it, if so how?
View 5 Replies
View Related
