Installed New Hard Drive - Won't Boot From CD
Nov 24, 2009I just installed a new WD 500 GB hard drive into my DELL computer. I am trying to install windows 7 from a dvd but it will not boot. Does anyone know what the problem is.
View 8 Replies
ADVERTISEMENT
Installed New Hard Drive With Windows 7 - PC Will Not Boot Up
Dec 10, 2011I recently bought a new hard drive with windows 7 home premium 32 bit installed. When tried to install it in my pc it would not boot up, I am assuming its because everything is new to it. I bought a windows 7 recovery disc but it has not worked. I did not get an install disc with the new hard drive.
View 5 Replies View RelatedInstalled Windows 7 On One Hard Drive / But It Seems To Need To Boot
Dec 12, 2011I have a computer with two (IDE ribbon cable) hard drives. One had a bad windows XP installation on it. I installed Windows 7 on the other. I formatted the drive before installing Windows 7.Then, I decided I want to use the hard drive with the bad winXP installation on it, in another computer (I will format it). When I opened the computer side panel, I wasn't sure which hard drive was which, so I unplugged the power to one, and started the computer.The thing is, it won't boot Windows 7 with either of those hard drives alone, only when both are plugged in. With HD #1 disconnected, it says "Can't find BOOTMGR, press a key to reboot." With HD #2 connected, I get asked whether I want Windows 7 or an older OS, and when I choose Windows 7, I get an error message, something like "Windows 7 failed to start. To try and repair, insert install disc, or use recovery mode, etc" With both HDs, I get asked the same question, "Windows 7 or an older OS," but when I choose Windows 7, it works. In my computer, I have verified that Windows 7's files are on one disk, and corrupt winXP files on the other.
View 8 Replies View RelatedWindows 7 Will Not Boot With Second Hard Drive Installed
Jan 21, 2013I have a Machine with the Following Config:
Intel E2180 CPU
2GB Ram
Gigabyte GA-G31M-S2C Mainboard
Seagate ST31000340NS SATA Hard Drive Connected on SATA0
Operating Systems:
Windows 7 Ultimate 64Bit on HDD
Windows 7 Ultimate 32Bit Booting from VHD
I Installed Windows 7 Ultimate 64Bit onto Hard Drive as Per Normal Installation Onto the Hard Drive and Installation created 2 Partitions (1 System PArt and Another for C: Drive) Everything Works Great.m I Then Installed Windows 7 Ultimate 32bit Into a VHD. Setup Created a Multiple Boot Entry into the BCD so that when I Boot it Prompt Which OS I Want, I then Used BCDEdit to Change the Descriptions of the Boot Options "Windows 7 Ultimate - 64Bit - HOST" and "Windows 7 Ultimate - 32Bit - VHD" Everything still works Great.. No Problems.. Been Like this for a While Now and Perfect.
Now the Problem is that I Need to get some Data From and Old SATA Drive. I Shutdown .. Plugin the WD1600AAJS (160GB) into Another SATA Port (SATA1).. Turn Machine on and Press Delete to Enter Setup for Bios.. Goto Set Boot Device Priority and Ensure that the ST1000340NS Drive is at the Top (1st Priority).. Exit and Save Settings.. PC Goes through POST and Then Will not Boot.. it Gives "Missing Operating System" Shutdown Remove WD1600AAJS Drive.. Boots Perfect.. Reattach WD 1600AAJS Drive and "Missing Operating System" Tried Using "F12 to Select Boot Option" during POST to Select Boot Device.. Choose ST1000340NS ... and Still same Issue.. Remove the WD1600AAJS and Boots No Prob Off the ST1000340NS.
I thought that maybe it was the WD Drive.. so Tried another Seagate Drive.. and Same Issue..
I have set Every Available Option on The Bios to Choose the Boot Device and NOTHING Works.. I have Even swapped HArd drive SATA Ports .. still no Difference.
I have an Idea there is a problem with the BCD but I Cannot Edit or Add any thing to the BCD as it will not boot with the second drive attached. And When you edit the BCD it need the second drive attached to be able to Add a BCD Entry.
Installed Windows 7 And Now Hard Drive Wont Boot?
May 13, 2012Asus cm5570-ap006 originally running vista premium and owner wanted an upgrade to seven. Bought a new hard drive b/c old one died. Mobo had trouble finding new drive but, after setting bios back to default(F5) it installed and finally got working.Owner gets pc and starts getting blue screening and saying theres an f1 drive error and wont wake up after suspending without reboot.So I get it running fine by removing avg(which is causing blue screen for some reason) and the it is now waking up after auto hibernation. But if you put into hibernation manually it wont wake. I update windows and it goes back to not recognising hard drive.Flash bios remove cmos baterry reset bios to default and set hard drive to ahcpi and it reinstalls fine update windows and it stops working. Use restore point to get it back and running and this time dont update windows and its running ok again. Shut it down for the night and the next day go to boot it up and there is no bootable media and now I am trying to reinstall Windows 7 and after it does it gets a no bootable media error even though it is
View 3 Replies View RelatedInstalled New Hard Drive, Windows 7 Won't Boot On Laptop
Sep 28, 2012First, the information as it is. I had a hard drive issue that I'm working on currently, trying to recover I suppose what is a crashed hard drive. There are tons of errors on it, but that's not the question I have right at the moment, but some background.
I have tried to reinstall Windows on a brand new 2.5" Seagate 500GB 7200rpm HDD. I formatted the drive using the windows 7 ultimate installer and booted it using a USB booter made from the windows 7 download tool.
When I booted it up and tried to get it going, it gave me a hardware error saying "Windows wasn't able to configure the hardware and try startup repair" or something to that effect. I read around and it said that since my BIOS says the HD is in raid configuration that it needed some Intel Raid driver, which I installed and tried running, but it didn't seem to work. It says now "windows cannot repair this computer automatically". The problem signature is as follows:
Problem Event Name StartupRepairOffline
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
[Code].....
Primary HDD in the BIOS is recognized as 500GB RAID is On as well. Trying to install Windows 7 Ultimate 64 bit.
Installed New Hard Drive On HP Pavillion Dv6 / Boot Disk Not Working
Jul 22, 2012New to the Tech forum boards but I am having a problem with my HP Pavillion dv6t. The hard drive went bad so I installed a new Seagate 1TB internal hard drive in the notebook. Starts up fine and then it says that "No bootable device found"---insert disk press any key. The disc is in the cd rom, I went into the BIOS enabled the CD/ROM boot option. I also went into the Boot option menu and tried selecting the internal cd/dvd rom drive option and I went into the actual boot order screen and adjusted the boot order so it read the cd-rom drive first then the hard drive. I also am using the HP Application and Driver recovery DVD. I am not sure if the disc is bad or cd drive is bad. The other thought is that because it is a brand new hard drive there is no information on it for the drivers so maybe the computer is not processing the information.
View 8 Replies View RelatedInstalled A New Hard Drive And Got An Error
Aug 7, 2012My HP Pavilion DV7 4267CL's hard drive went out last week. I bought a new one, the same brand name and specifications. I installed the drive, turned it on, inserted the first disc, restarted it and follow the prompts. I selected to reset factory default and continue to follow the on screen prompts. After installing all four discs, it restarted by itself and gave me an HP logo. It ask me to restart to complete installation. When it restarted again, it gave me a bootmgr is missing press ctrl+alt+delete to restart. I pressed it and it gave me the same error again. I did all the reinstallation 3x but no luck. I was getting the same error. So, I went to the bio boot utility by restarting the pc and preesing F10 while booting. I rearrange the booting sequence, dvd/cd rom drive, internal computer hard drive restarted it, inserted the first disc, turned off pc and reinstalled it and all 3 other discs. But at the end, I'm still getting the same error.
View 4 Replies View RelatedNo New Hard Drive Found - Just Installed It?
Sep 9, 2010I just added a new hard drive to replace the old one that is apparently corrupted. And I'm not sure what I did wrong. I was told to unplug the power supply and the old hd. Add the new one, and power it back up with the Windows 7 installation dvd. Did that and in trying to change the order in witch it boots to cd-rom, it shows sata hd not present? I don't know why, I replaced the cords in the right place. Do I need to configure it, if so how?
View 5 Replies View RelatedNew Hard Drive Physically Installed?
Nov 28, 2012Hard drive does not show up in either 'My Computer' or in device manager. building my own pc. I built this one from the ground up basically by myself with no problems. Ive taught myself everything i do know and this is beyond my knowledge. Is there anything i could have done wrong? when i restart the pc it shows up as S.M.A.R.T Error. or something along those lines. Windows 7 64 bit, any other information needed will be provided.
View 1 Replies View RelatedHow To Get Windows 7 Installed On New Hard Drive (1TB)
Oct 12, 2011To boot up. Here's my issue I have a HP Desk top with a standard 320 GB hard Drive. I bought a new Hard drive (1 TB Western Digital) so that I could move everything to the new one and use the old one as storage. I had trouble even formatting the new drive but eventually got it and successfully installed a full version of Win 7. (The old hard drive has Win Vista with Win 7 upgrade on it. When I boot up the computer I receive a message asking which WIN 7. I want to use and actually either one works.
I wanted to format my old drive so that I would only have one Operating system w/ WIN 7 installed. I tried to format it (the old drive) at the command prompt, but alas it wouldn't let me. So, I opened the case and disconnected the power cord first and then I unplugged the SATA cable as well as the power cable to the hard drive. I tried to re-start the computer but now it says cannot find something, unable to read or error. So, I take it something is missing from the new Windows 7 install to my new hard drive?
Cloning A Hard Drive With Windows 7 Installed?
Jun 11, 2012My company clones hard drives for deploying our software (each software comes with a new computer and a new windows license). We clone the drive to avoid installing the mother board drivers, windows updates, sql server, etc etc each time. This worked great with Windows XP but with Windows 7 we get a boot error on the clone: "Windows failed to start. A recent hardware or software change might be the cause. To fix the problem..." We are a small company and it really is a pain to re-install everything for each new release we do.
View 4 Replies View RelatedTransfering Installed System To New Hard Drive
Sep 8, 2009Here's the deal: I've bought a new 1.5TB hard drive for my PC to replace the 320GB one in there at the moment (turning it into a HTPC). Problem is, it's one of those mini-tower PCs and it only has the one hard drive slot. This means it's re-installation time!
So the question is, what do you lot think would be the best way of setting up Windows 7 on this new drive, hopefully keeping as much as possible of my current setup? As far as I can work out, my options are as follows:Use the Windows Backup thing to do a complete PC backup, installing Windows on the new hard drive, then restoring the system from the backup. Use a Linux live CD and use Partimage to create an image of the system partition which I can then put on the new hard drive and hope it boots (obviously once the MBR is sorted, etc). Just install Windows on the new hard drive and set everything up again from scratch. The hard drive arrives in 2 days, so what do you reckon?
Just Re-installed Windows 7 After A Hard Drive Failure
Jan 27, 2013Just re-installed Windows 7 after a hard drive failure. Windows 7 x64 Home premium . 2.4 Ghz Processor 4GB RAM . Cannot Install SP1.
View 2 Replies View RelatedInstalled Xp Over Windows 7 With External Hard Drive
Apr 17, 2011First time poster here. I messed up big time trying to get my dell 1747 to dual boot in xp and win 7, i think. I installed xp on to an external hard drive via and esata connection. Now it won't boot without the external hard drive connected and of course will only boot in xp. The xp disc manager say that windows 7 is the primary os which confused me. I Tried the windows 7 recovery disc but it won't boot. I'm completely lost here, and I'm looking for the first step to take. AS it stands I have a C:RECOVERY, D:Fantom(my external to which i installed xp) and E: OS, why is E labeled OS? I could really use some help here.I can't uninstall xp in safe mode with administrator access. I'm wondering if i format the D drive containing Windows xp, if I will Automatically boot from my previous windows 7?
View 1 Replies View RelatedLost 50G From Hard Drive After Windows 7 Was Installed?
Feb 3, 2012I had windows 7 ultimate installed by a friend and when it was returned about 50G was missing from the drive.
I thought my friend had changed drives but maybe. how to get the 50G back?
Can A 2tb Sata Hard Drive Be Installed On Optiplex 745
Jun 1, 2012No success getting windows 7 to install with 2 TB sata hard drive. It reads on BIOS but when installer setup for W7 it stops in the beginning with "required cd/dvd driver missing"; asking you to go ahead and remove your installer disk for that particular step only.
View 1 Replies View RelatedInstalled Old Hard Drive On Repaired Laptop
Jun 18, 2012I was booting off an ssd originally and have a regular hdd as backup. then i had to get my laptop repaired. i removed the ssd and shipped the laptop off. upon receiving it, i popped my hard drive back in and changed the boot settings in bios to my ssd instead of the hdd.it boots just fine, but my wallpaper was gone and i cant access certain things like my computer, control panel, etc. an error pops up saying that it wont initialize.is there a procedure i must do? i tried sfc scannow and it restored my desktop, but it said somethings were unable to be repaired. im also wondering how come it didnt just work right away as if i never sent it in for repairs. i stumbled upon a guide that said how to re register my dlls.
View 1 Replies View RelatedWhy Windows 7 Cannot Be Installed After Hard Drive Replace
Sep 15, 2012why windows cannot be installed after hard drive replace?
View 2 Replies View RelatedCan't Use Programs On Old Hard Drive Installed On New Computer
Nov 7, 2012I just got a new comp, w/ win7. I just took the HD from my old comp, and added it 2 the new system, hoping that i could run some programs from it on the new comp, (because i've lost install cd's etc..) Everythings fine except, I cant run any of the programs. Like, Old drive has Microsoft Digital Media Edition. I tried to open it & run the install, but the new comp says.. cant access registry. New unit is win 7, old one was xp, sp2. anything i can do to use my old programs? can i copy the drive onto the win 7 hd?
View 2 Replies View RelatedInstalled Storage Drive, Now System Drive Will Not Boot
Sep 30, 2012I have a 1T SATA system drive and a 1T SATA working drive. I installed a 3T SATA storage drive, and now my system won't boot from the C:. I have to go into the BIOS and boot from there, or use a boot disk. How do I get the system to boot from C: again?
View 3 Replies View RelatedInstalled New SSD Boot Drive, Want To Repartition Existing Drive
Mar 23, 2012I have a partition question and after scouring the Web, can't find anyone with the exact same situation as mine. Basically what I'm wondering is if I can delete a primary partition and then extend another, non primary into that space.
Here's what I have and why I want to do this: my laptop came from the factory with one 500GB SATA drive, split into two partitions (C, primary, and D, logical, each 250GB). The Win7 install was on the C drive. Recently, I installed a 120GB SSD as a second drive, and using the tools with it, copied the contents of my existing C partition to the new SSD, and then made the SSD the boot drive labeled as the C drive. So far so good, everything works fine.
Now, what I'm left with is this: C: 120GB (SSD, now the boot drive with the Win7 install) D: 250GB (SATA, the original D partition, Disk Management IDs it as a logical drive, extended partition) E: 250GB (SATA, the original C partition, Disk Management IDs it as a primary partition)
So, I have the original "C drive" on E now... it's no longer the system/boot drive. Obviously I don't need the files on it as they are all on the new SSD. What I want to do is to delete all those files and then combine what's on D and E into one 500GB D drive as I have no reason to have the two partitions. Is it possible to just delete the E partition and then extend the D partition into the unallocated space? I'm confused because it seems as though the D partition may rely on the E partition being there since the E drive IDs as primary. Or would the D partition become primary?
I know I could just back up the D partition to an external drive, delete both D and E partitions, and reformat as one new D and restore the files, but I don't want to create more work for myself if I don't have to. Obviously I don't want to mess up the files on the D drive though, which is why I'm asking.
Installed A New Hard Drive But Can't Get System Image Restored?
Nov 10, 2011I just installed a new hard drive after my previous one failed to start up. I have a backup image stored on an external WD Passport. The install went well. I turn on my tower with the Windows 7 recovery disc in, start up System Image Restore and plug in my Passport. The system restore recognizes my Passport and when I go through the wizard to reformat and partition the disk to match the layout of the recovery image, I get an error message saying "The system image restore failed. No disk that can be used for recovering the system disk can be found. *hyperlink* Details."Details states, "No disck that can be used for recovering the system disk can be found. Try the following: 1) A probable system disk may have been excluded by mistake. a. Review the list of disks that you have excluded from the recovery for a likely disk. b. Type LIST DISK command in the DISKPART command interpreter. The probable system disk is usually the first disk listed. c. If possible,, remove the disk from the exclusion list and then retry the recovery.Tried that, my disk is not listed as an exclusion.2) A USB disk may have been assigned as a system disk. a. Detach all USB disks from the computer. b. Reboot into Windows Recovery Environment then reattach USB disks and retry the recovery.
View 1 Replies View RelatedPossible To Backup Installed Applications To External Hard Drive?
Dec 10, 2012Can you backup installed applications to an external hard drive, then restore them to another Computer without Reinstalling them? For example, My computer Windows 7 Home Premium has many softwares, applications, programs, utilities, etc. That I purchased and don't want to Reinstall them on new computer. Is it possible for them to work without Re-entry keys?
View 9 Replies View RelatedInstalling Windows 7 On A Newly Installed Hard Drive?
Feb 18, 2012Tried to installed windows 7 on a new installed hard drive. A message comes up "Windows did not installed. Installed windows" After clicking OK the computer just continues shutoff and reboots. Showing computer administered locked
View 2 Replies View RelatedHow To Delete Half Installed OS Off Hard Drive But Keep Files
Jul 17, 2012I'm having an issue with my 2tb Sata Hard drive, in an attempt to reload windows onto the hard drives on my PC, "I wasn't sure which one had the least files!"I half loaded windows onto it before being told something along the lines of not enough free space, now after buying a new OS hard drive am hoping to access those files, yet every time I start windows with both plugged in my computer, none are picking up! Until I unplug the faulty and restart and its fine again.
View 1 Replies View RelatedAny Way To Move Installed Programs To New External Hard Drive?
Oct 23, 2012I'm about to get a 2 terabyte external hard drive and I would like to move all my user installed programs to it without uninstalling them and reinstalling to the new drive. My question is....1. Is it safe to drag and drop the program files from C: to the new drive, and 2. If it's not a good idea to perform a drag and drop is there another option?
View 4 Replies View RelatedThe Cleanly Installed Windows 7 Is Not Reading External Hard Drive
Oct 9, 2011I have a WD5000D032-000 pocket 500 Gig. It worked on my vista 32 bit home. I updated to windows 7 home premium 64 bit edition and now my computer can't read it. It is displayed under Device manager just not My Computer
View 1 Replies View RelatedExisting External Hard Drive Installed In New Case, Does Not Recognize?
Jan 2, 2012I use an WD external hard drive (1TB) for additional storage and it was working fine with no issues. The small USB connector broke off the board yesterday and I purchased a new enclosure and installed it. Now my computer does not recognize it as a storage device. I have all the data still on the HD and really do not want to loose it. I tried adding a letter for the drive, but it does not show up to change the letter of the drive.
View 3 Replies View RelatedRaid Card Will Not Boot With Drive Installed
Nov 13, 2009I installed a Rosewell RC-217 Raid card (Silicon Image Sil 3124 SoftRaid 5 Controller-- in Device Manager). The card installed well in Windows 7 64 bit. No problems in device manager.The problem starts when i plug the drive in then rebooted. The boot stops at the 'Starting Window' and hangs. If i boot into windows then plug the drive in all work well. Windows sees the drive and i gave it a drive letter. works great.Problem is i can't boot my system without un-pluging the drive.
View 6 Replies View RelatedInstalled Win7, System Will Not Boot From Proper Drive
Oct 11, 2009I recently isntalled windows 7 professional and I have three sata drives, one is the system drive where windows 7 is installed (C, my primary partition, the other is a storage drive (F and a drive to replace the partition (Z. My boot priority for the moment is the F: drive then the C:. This is because for some reason my C: drive, even though the system is installed on it, will not boot.
I tried several things like copying the hidden system folder in F:Boot to the C drive but that did not work. I recently did a repair install but that did not restore the boot manager. Is there a way to manually set my C: drive as my primary boot drive, without jumping through hoops, I bought the Z drive to replace the F drive and need to be able to boot without it.