How To Delete Half Installed OS Off Hard Drive But Keep Files
Jul 17, 2012
I'm having an issue with my 2tb Sata Hard drive, in an attempt to reload windows onto the hard drives on my PC, "I wasn't sure which one had the least files!"I half loaded windows onto it before being told something along the lines of not enough free space, now after buying a new OS hard drive am hoping to access those files, yet every time I start windows with both plugged in my computer, none are picking up! Until I unplug the faulty and restart and its fine again.
While looking for solutions I seemed to come very close to finding someone with my exact problem, but not quite. Here goes:
I had a hard drive with Windows 7 installed. Everything worked, etc. Got a new hard drive, and installed 7 on there as well without making changed to the old hard drive (prompts displayed during new installation saying "old" windows files would be saved). I've been using it for a while now, however I want to use the old hard drive strictly for storage, so I tried to format it to clear the space out. I got the notice "Windows cannot complete format." Went to the forums and looked thru several suggestions, which brought me to try deleting the files individually.
Included in all this were attempts to give myself (the only user on the computer) full control of all files (which was already the case), to take ownership (via right click options AND command prompt "takeown" and "cacls"), to change permissions/ownership via "properties" for the drive/folders, command prompts to remove the "active" status of the old hard drive, as well as removing "boot" status from old drive (while making sure the new drive had "boot" status), tried everything I can think of using Disk Management AND the DiskPart utility, as well as countless other suggestions that I can barely remember. I'm still getting the "You need permission to perform this action." What I don't get is, if I'm THE administrator (and the only user), how do I not have access to this?
I'm sure there are some details I'm leaving out, but I've been at it for hours. Let me know if there's something you need to know. Running Windows 7 Ultimate 32bit, 4GB RAM, 3.2 Ghz AMD Athlon II.
I just figured out that I can't delete files from my external hard drive. It's WD Elements 320GB. Only thing I did before this occured is that I converted file system from FAT32 to NTFS via command in cmd prompt, but I'm not sure if that showed up after that. So, I don't have "delete" or "rename" commands on right click. Backup of all files is a no go since I don't have so much free space atm. I use my user account which is also admin account.
I just turned on an almost new build pc to install windows 7. The entire pc is a new build except the hard drive that has a good copy of xp installed. I am trying to install a new copy of windows 7 on the hard drive. So I turned the pc on and go into the bios to set the DVD to boot first. So windows starts to install and the window is loading bar comes up. After the bar gets over half full, the screen drops and there is a line of h's on the left side of the screen and the installation freezes.
I just installed Windows 7 Enterprise 64-bit on two machines, and then Firefox 16.0.1 on each. Trying to replace the password files in my new profile, I found that many of these folders and files (in UsermeAppDataRoamingMozilla) cannot be deleted, nor can their ownership be changed. They belong to me already, and I'm an administrator with Full Control.
I've tried 72 tricks, including Emco UnLockIt 3.0.3, Unlocker 1.9.1, Take Ownership registry keys, takeown (from the command line), etc. Nothing works. I can't move them, delete them or anything. Nor can Mozbackup create a backup profile (it can't write the backup). Why does Firefox create these weird locked files and folders? Why doesn't Windows 7 allow me to take control of them?
i'm going to go from 32 bit vista to 64 bit windows 7 and i want to know if files from my other hard disk that i use which doesn't contain any windows files or anything like that will be wiped when i'm installing it. also will it delete all of my files on the original C hard disk?
I have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
I have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.
I have an external 1 TB hard drive. Its usually connected to an XP machine, but I can move it to a Win 7 machine. I am unable to delete a directory. I got a hint to try using the CMD window. The top of the dir list is:Quote: K:>dir /XVolume in drive K is 1TB HD[CODE]
My HP Pavilion DV7 4267CL's hard drive went out last week. I bought a new one, the same brand name and specifications. I installed the drive, turned it on, inserted the first disc, restarted it and follow the prompts. I selected to reset factory default and continue to follow the on screen prompts. After installing all four discs, it restarted by itself and gave me an HP logo. It ask me to restart to complete installation. When it restarted again, it gave me a bootmgr is missing press ctrl+alt+delete to restart. I pressed it and it gave me the same error again. I did all the reinstallation 3x but no luck. I was getting the same error. So, I went to the bio boot utility by restarting the pc and preesing F10 while booting. I rearrange the booting sequence, dvd/cd rom drive, internal computer hard drive restarted it, inserted the first disc, turned off pc and reinstalled it and all 3 other discs. But at the end, I'm still getting the same error.
I just added a new hard drive to replace the old one that is apparently corrupted. And I'm not sure what I did wrong. I was told to unplug the power supply and the old hd. Add the new one, and power it back up with the Windows 7 installation dvd. Did that and in trying to change the order in witch it boots to cd-rom, it shows sata hd not present? I don't know why, I replaced the cords in the right place. Do I need to configure it, if so how?
Hard drive does not show up in either 'My Computer' or in device manager. building my own pc. I built this one from the ground up basically by myself with no problems. Ive taught myself everything i do know and this is beyond my knowledge. Is there anything i could have done wrong? when i restart the pc it shows up as S.M.A.R.T Error. or something along those lines. Windows 7 64 bit, any other information needed will be provided.
To boot up. Here's my issue I have a HP Desk top with a standard 320 GB hard Drive. I bought a new Hard drive (1 TB Western Digital) so that I could move everything to the new one and use the old one as storage. I had trouble even formatting the new drive but eventually got it and successfully installed a full version of Win 7. (The old hard drive has Win Vista with Win 7 upgrade on it. When I boot up the computer I receive a message asking which WIN 7. I want to use and actually either one works.
I wanted to format my old drive so that I would only have one Operating system w/ WIN 7 installed. I tried to format it (the old drive) at the command prompt, but alas it wouldn't let me. So, I opened the case and disconnected the power cord first and then I unplugged the SATA cable as well as the power cable to the hard drive. I tried to re-start the computer but now it says cannot find something, unable to read or error. So, I take it something is missing from the new Windows 7 install to my new hard drive?
I just installed a new WD 500 GB hard drive into my DELL computer. I am trying to install windows 7 from a dvd but it will not boot. Does anyone know what the problem is.
I created a new partition and formatted it into Fat32 so my PS3 could recognize it. Now I don't need it. I now have a 30 GB and a 100 MB partition, and I don't know how to get rid of them.
i bought a used computer from a pawn shop with windows xp and windws 7. I boots up 7 but is to slow. windows xp has a password needed to open that i dont know. how can I dump 7 and open xp without the password.
The problem is that if a folder contains a .exe file (either in its root or in a subfolder) then it is impossible to delete the folder without first navigating inside it and any subfolders that it may have and manually deleting every .exe file.This problem exists with all folders regardless of location (any drive, any folder or subfolder).I'm already using the Hidden administrative account and have disabled all User account controls etc.This has fixed most of my file deleting problems but not this .exe problem.As a side effect of this problem - many Games cannot install/patch/update because their installers cannot erase .exe files which often is required during updates/patches/installations of games. I have to manually work and figure out the installation process and erase
I recently bought a new hard drive with windows 7 home premium 32 bit installed. When tried to install it in my pc it would not boot up, I am assuming its because everything is new to it. I bought a windows 7 recovery disc but it has not worked. I did not get an install disc with the new hard drive.
My company clones hard drives for deploying our software (each software comes with a new computer and a new windows license). We clone the drive to avoid installing the mother board drivers, windows updates, sql server, etc etc each time. This worked great with Windows XP but with Windows 7 we get a boot error on the clone: "Windows failed to start. A recent hardware or software change might be the cause. To fix the problem..." We are a small company and it really is a pain to re-install everything for each new release we do.
I have a computer with two (IDE ribbon cable) hard drives. One had a bad windows XP installation on it. I installed Windows 7 on the other. I formatted the drive before installing Windows 7.Then, I decided I want to use the hard drive with the bad winXP installation on it, in another computer (I will format it). When I opened the computer side panel, I wasn't sure which hard drive was which, so I unplugged the power to one, and started the computer.The thing is, it won't boot Windows 7 with either of those hard drives alone, only when both are plugged in. With HD #1 disconnected, it says "Can't find BOOTMGR, press a key to reboot." With HD #2 connected, I get asked whether I want Windows 7 or an older OS, and when I choose Windows 7, I get an error message, something like "Windows 7 failed to start. To try and repair, insert install disc, or use recovery mode, etc" With both HDs, I get asked the same question, "Windows 7 or an older OS," but when I choose Windows 7, it works. In my computer, I have verified that Windows 7's files are on one disk, and corrupt winXP files on the other.
Here's the deal: I've bought a new 1.5TB hard drive for my PC to replace the 320GB one in there at the moment (turning it into a HTPC). Problem is, it's one of those mini-tower PCs and it only has the one hard drive slot. This means it's re-installation time!
So the question is, what do you lot think would be the best way of setting up Windows 7 on this new drive, hopefully keeping as much as possible of my current setup? As far as I can work out, my options are as follows:Use the Windows Backup thing to do a complete PC backup, installing Windows on the new hard drive, then restoring the system from the backup. Use a Linux live CD and use Partimage to create an image of the system partition which I can then put on the new hard drive and hope it boots (obviously once the MBR is sorted, etc). Just install Windows on the new hard drive and set everything up again from scratch. The hard drive arrives in 2 days, so what do you reckon?
First time poster here. I messed up big time trying to get my dell 1747 to dual boot in xp and win 7, i think. I installed xp on to an external hard drive via and esata connection. Now it won't boot without the external hard drive connected and of course will only boot in xp. The xp disc manager say that windows 7 is the primary os which confused me. I Tried the windows 7 recovery disc but it won't boot. I'm completely lost here, and I'm looking for the first step to take. AS it stands I have a C:RECOVERY, D:Fantom(my external to which i installed xp) and E: OS, why is E labeled OS? I could really use some help here.I can't uninstall xp in safe mode with administrator access. I'm wondering if i format the D drive containing Windows xp, if I will Automatically boot from my previous windows 7?
No success getting windows 7 to install with 2 TB sata hard drive. It reads on BIOS but when installer setup for W7 it stops in the beginning with "required cd/dvd driver missing"; asking you to go ahead and remove your installer disk for that particular step only.
I was booting off an ssd originally and have a regular hdd as backup. then i had to get my laptop repaired. i removed the ssd and shipped the laptop off. upon receiving it, i popped my hard drive back in and changed the boot settings in bios to my ssd instead of the hdd.it boots just fine, but my wallpaper was gone and i cant access certain things like my computer, control panel, etc. an error pops up saying that it wont initialize.is there a procedure i must do? i tried sfc scannow and it restored my desktop, but it said somethings were unable to be repaired. im also wondering how come it didnt just work right away as if i never sent it in for repairs. i stumbled upon a guide that said how to re register my dlls.
