Tried to installed windows 7 on a new installed hard drive. A message comes up "Windows did not installed. Installed windows" After clicking OK the computer just continues shutoff and reboots. Showing computer administered locked
View 2 Replies
I have an ASUS G73 laptop and have installed an OCZ 240GB SSD drive. The laptop currently has Windows 7 Home premium 64 on it on the original drive. I would like to install a new Windows 7 Professional 64 version on the new drive and be able to dual boot. I have formatted the new drive and it is recognized in My Computer and I can save files on it.When i tried to install 7 Pro, it would not show the new drive as an option to install on. I tried this by inserting the disc in the DVD drive and by rebooting with the DVD in the drive. I also took the original drive out of it's bay and tried to reboot and could not get it to install. I then moved the new drive to the original drive's bay and rebooted and could not get it to install.When you all finish giggling about all the stuff I went through, could you post a guide on what I can do to get it to install?
View 3 Replies View RelatedI have just built a new computer and i am wondering if it is possible to use my old windows 7 OS on a hard drive on the new computer. old computer was a HP pavilion elite-141f and the new computer has AMD fx-8350 , asus GTX 660 TI and a gigabyte motherboard
View 5 Replies View Relatedlike the title says just installed but no sound at all and my speakers are plugged in , also checked for driver updates it said nothing needs to be updated..
View 15 Replies View RelatedSlow Start Up on Newly Installed Windows 7 X64 Sp1 - Laptop Asus U30JC.
View 3 Replies View RelatedI have a laptop that has been upgraded to Windows 7 from vista. In the beginning everything was fine and things worked really fast. However, for past few months I have had dreadful performance. Whenever I check my CPU is at 100% and it takes ages to do anything. Even opening a chrome tab takes 5 minutes. I tried doing driver checks to confirm nothing was wrong.After trying hard, I just re-installed Windows 7 but no luck. Then I formatted my hard disk and installed windows 7 again. Now it works fine but I do get the extreme slowness sometimes.While doing all of this, one thing I noticed that if I was to put my laptop to sleep and bring back it might start working absolutely fine. Before reformatting it worked 50% of times. Now again it has worked whenever I tried. I wonder if this is a CPU power setting issue? I have already set the power settings to have full performance
View 5 Replies View RelatedI've just installed fresh Win 7 ultimate x64 via USB. Right from the start it was working really slow but it just got worse.
My hardware is decent: Intel i7 CPU, 12GB RAM, WD Caviar 500GB system HDD. Task Manager shows that only 13% of RAM is being used and 0% of CPU. Still, I can barely work on it - it keeps freezing everytime I click on more than one window...
Once I had to do a hard restart since it didn't want to shutdown normally, and then I got startup failure screen. Startup repair didn't do anything but it still managed to boot somehow.
I tried to optimize win process but that didn't do anything either.
I believe it might be the HDD, since I ran Win normally on other HDD with same hardware... But I did use current one as backup storage without a problem.
I am going to build a new pc from scratch, I already have a windows 7 installation disc and an windows xp installation disc from my old pc that i bought. I am worried when I try install the windows 7 os on the new build it wont work because when i put the disc in my laptop the auto run comes up and says run setup.exe, but as far as I know that is a file that is associated with windows (and the new pc wont have an OS yet) Is that file just for upgrade purposes? because on the disc there are also many other files and folders.Does that mean I will be able to install the OS on my new system from the BIOS menu or will i have to install the old xp OS and then upgrade
View 2 Replies View RelatedI just installed Windows 7 yesterday from Vista (I got a CD through the upgrade because I got a new computer) and the install went fine. It worked for about 4 hours perfectly, but suddenly it just froze. I couldn't do anything with the mouse or keyboard. After manually shutting it off (power button) I can turn it back on, it loads the desktop and I am able to move the mouse for a few seconds, then it freezes.
I've tried booting in Safe Mode (what I'm in right now) and removing all the startup programs, and that didn't help. So now I've come for help.
Current Operating System, pre-install
•Do you have a single OS on your computer, are you planning on multi-booting with this installation? Just 7 right now. I'm planning to do Ubuntu once I get 7 working.
•Are you multi-booting now? No.
Current Hardware
•How many internal hard drives (HD) are connected to your system? 1 250 GB drive.
•Are they IDE or SATA? I don't know. Probably whichever one's worse.
•How many DVD drives are connected to your system? 1
•Are they IDE or SATA Drives? I don't know.
•Any external HDs used? No.
•Are they connected by USB or eSATA? N/A
•Check Disk Management for any HDs listed with a yellow triangle and explanation point? No
•Is this a New Clean HD? No
• Have you pre-formatted the HD? What?
Windows 7 installation details
•Build 7600, Home Premium, 32 bit, from a DVD/CD upgrade disk.
Other
•Any Over Clocking of the RAM, CPU or GPU? No.
To boot up. Here's my issue I have a HP Desk top with a standard 320 GB hard Drive. I bought a new Hard drive (1 TB Western Digital) so that I could move everything to the new one and use the old one as storage. I had trouble even formatting the new drive but eventually got it and successfully installed a full version of Win 7. (The old hard drive has Win Vista with Win 7 upgrade on it. When I boot up the computer I receive a message asking which WIN 7. I want to use and actually either one works.
I wanted to format my old drive so that I would only have one Operating system w/ WIN 7 installed. I tried to format it (the old drive) at the command prompt, but alas it wouldn't let me. So, I opened the case and disconnected the power cord first and then I unplugged the SATA cable as well as the power cable to the hard drive. I tried to re-start the computer but now it says cannot find something, unable to read or error. So, I take it something is missing from the new Windows 7 install to my new hard drive?
I have: reset the icon cache, reset registry settings (perhaps regretting it now? no effect), tried IconPackager.So the problem is that I have missing icons for all .exe's on my system, except newly installed ones. I also have a problem with any folder that contains a file. (when a folder has a file in it, it shows a preview of it inside the folder: that is the icon that is messed up, the normal folder with nothing in it is fine).I replaced that icon a while ago and then tried to set it back with IconPackager, but it never reset that icon (all the rest are fine). Lastly, shortcut icons are also screwed up.I can manually reset shortcut icons by re-referencing the .exe, but not the .exe icons themselves.
I believe this may be to do with the fact that IconPackager was intended for XP or something like that, because I've readthat the way icons are linked to applications is done differently between the two OS.So, what I need is a way to, en mass, link all .exe's with their own icons that are bundled inside the .exe.Be it an app, a cmd line, whatever.I also need a way to reset that folder problem. I've tried with the Registry to no effect.
just installed two new Windows 7 computers with Windows 7 Professional 64-bit.When opening Internet Explorer the home page displays instantly but then if i try and visit other pages (even something as simple as Google) the pages take an age to display.I thought it might have just been the connection but if i try the same pages on a Windows XP machine or on my Mac, they display a lot quicker.
View 7 Replies View RelatedI recently bought a new hard drive with windows 7 home premium 32 bit installed. When tried to install it in my pc it would not boot up, I am assuming its because everything is new to it. I bought a windows 7 recovery disc but it has not worked. I did not get an install disc with the new hard drive.
View 5 Replies View RelatedMy company clones hard drives for deploying our software (each software comes with a new computer and a new windows license). We clone the drive to avoid installing the mother board drivers, windows updates, sql server, etc etc each time. This worked great with Windows XP but with Windows 7 we get a boot error on the clone: "Windows failed to start. A recent hardware or software change might be the cause. To fix the problem..." We are a small company and it really is a pain to re-install everything for each new release we do.
View 4 Replies View RelatedI have a computer with two (IDE ribbon cable) hard drives. One had a bad windows XP installation on it. I installed Windows 7 on the other. I formatted the drive before installing Windows 7.Then, I decided I want to use the hard drive with the bad winXP installation on it, in another computer (I will format it). When I opened the computer side panel, I wasn't sure which hard drive was which, so I unplugged the power to one, and started the computer.The thing is, it won't boot Windows 7 with either of those hard drives alone, only when both are plugged in. With HD #1 disconnected, it says "Can't find BOOTMGR, press a key to reboot." With HD #2 connected, I get asked whether I want Windows 7 or an older OS, and when I choose Windows 7, I get an error message, something like "Windows 7 failed to start. To try and repair, insert install disc, or use recovery mode, etc" With both HDs, I get asked the same question, "Windows 7 or an older OS," but when I choose Windows 7, it works. In my computer, I have verified that Windows 7's files are on one disk, and corrupt winXP files on the other.
View 8 Replies View RelatedJust re-installed Windows 7 after a hard drive failure. Windows 7 x64 Home premium . 2.4 Ghz Processor 4GB RAM . Cannot Install SP1.
View 2 Replies View RelatedFirst time poster here. I messed up big time trying to get my dell 1747 to dual boot in xp and win 7, i think. I installed xp on to an external hard drive via and esata connection. Now it won't boot without the external hard drive connected and of course will only boot in xp. The xp disc manager say that windows 7 is the primary os which confused me. I Tried the windows 7 recovery disc but it won't boot. I'm completely lost here, and I'm looking for the first step to take. AS it stands I have a C:RECOVERY, D:Fantom(my external to which i installed xp) and E: OS, why is E labeled OS? I could really use some help here.I can't uninstall xp in safe mode with administrator access. I'm wondering if i format the D drive containing Windows xp, if I will Automatically boot from my previous windows 7?
View 1 Replies View RelatedI had windows 7 ultimate installed by a friend and when it was returned about 50G was missing from the drive.
I thought my friend had changed drives but maybe. how to get the 50G back?
why windows cannot be installed after hard drive replace?
View 2 Replies View RelatedI have a Machine with the Following Config:
Intel E2180 CPU
2GB Ram
Gigabyte GA-G31M-S2C Mainboard
Seagate ST31000340NS SATA Hard Drive Connected on SATA0
Operating Systems:
Windows 7 Ultimate 64Bit on HDD
Windows 7 Ultimate 32Bit Booting from VHD
I Installed Windows 7 Ultimate 64Bit onto Hard Drive as Per Normal Installation Onto the Hard Drive and Installation created 2 Partitions (1 System PArt and Another for C: Drive) Everything Works Great.m I Then Installed Windows 7 Ultimate 32bit Into a VHD. Setup Created a Multiple Boot Entry into the BCD so that when I Boot it Prompt Which OS I Want, I then Used BCDEdit to Change the Descriptions of the Boot Options "Windows 7 Ultimate - 64Bit - HOST" and "Windows 7 Ultimate - 32Bit - VHD" Everything still works Great.. No Problems.. Been Like this for a While Now and Perfect.
Now the Problem is that I Need to get some Data From and Old SATA Drive. I Shutdown .. Plugin the WD1600AAJS (160GB) into Another SATA Port (SATA1).. Turn Machine on and Press Delete to Enter Setup for Bios.. Goto Set Boot Device Priority and Ensure that the ST1000340NS Drive is at the Top (1st Priority).. Exit and Save Settings.. PC Goes through POST and Then Will not Boot.. it Gives "Missing Operating System" Shutdown Remove WD1600AAJS Drive.. Boots Perfect.. Reattach WD 1600AAJS Drive and "Missing Operating System" Tried Using "F12 to Select Boot Option" during POST to Select Boot Device.. Choose ST1000340NS ... and Still same Issue.. Remove the WD1600AAJS and Boots No Prob Off the ST1000340NS.
I thought that maybe it was the WD Drive.. so Tried another Seagate Drive.. and Same Issue..
I have set Every Available Option on The Bios to Choose the Boot Device and NOTHING Works.. I have Even swapped HArd drive SATA Ports .. still no Difference.
I have an Idea there is a problem with the BCD but I Cannot Edit or Add any thing to the BCD as it will not boot with the second drive attached. And When you edit the BCD it need the second drive attached to be able to Add a BCD Entry.
It's kinda distracting to see the highlight on newly installed programs on the Start Menu. It makes want to click it even if I don't even need to open the program anyway.How do I stop this from happening every time I install a new program?
View 1 Replies View RelatedI'm currently experiencing some issues with my computer, specifically, BSODs. They've never happened before, it's only been in the last few weeks that they have happened.They don't happen often but it happens when I'm playing games, these aren't newly installed games, I've played them for over a year with no issue.
View 6 Replies View RelatedAsus cm5570-ap006 originally running vista premium and owner wanted an upgrade to seven. Bought a new hard drive b/c old one died. Mobo had trouble finding new drive but, after setting bios back to default(F5) it installed and finally got working.Owner gets pc and starts getting blue screening and saying theres an f1 drive error and wont wake up after suspending without reboot.So I get it running fine by removing avg(which is causing blue screen for some reason) and the it is now waking up after auto hibernation. But if you put into hibernation manually it wont wake. I update windows and it goes back to not recognising hard drive.Flash bios remove cmos baterry reset bios to default and set hard drive to ahcpi and it reinstalls fine update windows and it stops working. Use restore point to get it back and running and this time dont update windows and its running ok again. Shut it down for the night and the next day go to boot it up and there is no bootable media and now I am trying to reinstall Windows 7 and after it does it gets a no bootable media error even though it is
View 3 Replies View RelatedFirst, the information as it is. I had a hard drive issue that I'm working on currently, trying to recover I suppose what is a crashed hard drive. There are tons of errors on it, but that's not the question I have right at the moment, but some background.
I have tried to reinstall Windows on a brand new 2.5" Seagate 500GB 7200rpm HDD. I formatted the drive using the windows 7 ultimate installer and booted it using a USB booter made from the windows 7 download tool.
When I booted it up and tried to get it going, it gave me a hardware error saying "Windows wasn't able to configure the hardware and try startup repair" or something to that effect. I read around and it said that since my BIOS says the HD is in raid configuration that it needed some Intel Raid driver, which I installed and tried running, but it didn't seem to work. It says now "windows cannot repair this computer automatically". The problem signature is as follows:
Problem Event Name StartupRepairOffline
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
[Code].....
Primary HDD in the BIOS is recognized as 500GB RAID is On as well. Trying to install Windows 7 Ultimate 64 bit.
I have a WD5000D032-000 pocket 500 Gig. It worked on my vista 32 bit home. I updated to windows 7 home premium 64 bit edition and now my computer can't read it. It is displayed under Device manager just not My Computer
View 1 Replies View RelatedI have built many computers but am having a little bit of a problem with some things and my new one. My new install went great. All programs installed without a hitch. Fast and furious is the way it went to get everything installed. Now, after a week or so I have started having a couple glitches. When I go to install a new program or update it the program just sits there for 4 or 5 minutes before doing anything and then finally starts to do its thing. The other issue is that I am trying to do a backup and image clone to get my new system backed up. The problem there is that the windows backup won't see my hard drives. I then tried Norton Ghost and the same thing happened. What is causing this?
View 13 Replies View RelatedI have a Lenovo Thinkpad T410. Win7 came pre-installed on hard drive without DVD copies. I want to put in a new solid state hard drive. Is there a way to create a Windows installation disc so I can format and install Win7 on the new hard drive? I know there's a copy of Win7 on a partition on the hard drive but I don't know what to do to make a DVD.
View 4 Replies View RelatedI have Windows 7 originally installed on an old HDD and recently purchased an SSD.How do I go about installing windows 7 into the SSD and deleting it from the old HDD?Is a reformat of the HDD the only way?
View 4 Replies View RelatedSo I am building my first computer so i bought my new motherboard, processor,etc.. and windows 7, but i am using an old hard drive from my broken computer that has windows xp on it. Before it all gets to my house i was curious on how to wipe the hard drive and install windows 7.
View 2 Replies View RelatedWell my old hard drive with 750 GB burned down. So i took out a other hard drive with 80 GB. I am currently running on Windows XP. And i was thinking to re-install Windows 7. Is it ok to install it on 80 GB? Or will it have performance issues?Check systems specs for more information.NOTE: Hard Drive is not SATA or PATA. Its IDE
View 9 Replies View RelatedI'm getting a new motherboard cpu ram and windows 7. I'm using my old hard drive and what i want to know is whether it'd go nice and smoothly and will there be a option to completely erase my hard drive when i load windows 7 at the start since my old hard drive has windows vista.
View 5 Replies View Related
