I have Windows 7 originally installed on an old HDD and recently purchased an SSD.How do I go about installing windows 7 into the SSD and deleting it from the old HDD?Is a reformat of the HDD the only way?
View 4 RepliesI have a Lenovo Thinkpad T410. Win7 came pre-installed on hard drive without DVD copies. I want to put in a new solid state hard drive. Is there a way to create a Windows installation disc so I can format and install Win7 on the new hard drive? I know there's a copy of Win7 on a partition on the hard drive but I don't know what to do to make a DVD.
View 4 Replies View RelatedSo I am building my first computer so i bought my new motherboard, processor,etc.. and windows 7, but i am using an old hard drive from my broken computer that has windows xp on it. Before it all gets to my house i was curious on how to wipe the hard drive and install windows 7.
View 2 Replies View RelatedWell my old hard drive with 750 GB burned down. So i took out a other hard drive with 80 GB. I am currently running on Windows XP. And i was thinking to re-install Windows 7. Is it ok to install it on 80 GB? Or will it have performance issues?Check systems specs for more information.NOTE: Hard Drive is not SATA or PATA. Its IDE
View 9 Replies View RelatedI'm getting a new motherboard cpu ram and windows 7. I'm using my old hard drive and what i want to know is whether it'd go nice and smoothly and will there be a option to completely erase my hard drive when i load windows 7 at the start since my old hard drive has windows vista.
View 5 Replies View RelatedI need to install a new harddrive 500GB/7200 rpm on my laptop. What is the procedure from installing a non formatet harddisk.
View 1 Replies View RelatedI bought an Off-The-Shelf desktop computer for gaming purposes, though unfortunately, I found out that upgrading it is not really easy, or possible. So, I decided to use the hard drive and DVD-R/W drive in a new build:It does come with an OEM Win 7 Home Premium 64-bit edition install on it, however, I have read that to upgrade the motherboard on it will not work due to the OS being Tied to the motherboard installed in it!
1. Is it possible to install a new OS ,Windows 7 Home Premium (the non-builder/non-OEM verison) over the previous one? and Also, how do I overwrite the old installation?
2. Do I really need to buy a new OS copy to build a new system?
new PC build Specs:
AMD Phenom 2 x4 975
Gigabyte GA-990FXA-UD3
Thermaltake TR2-RX 850W black widow W0139
Sapphire Radeon HD 6950 2GB
Corsair Vengence 8GB 1600
NZXT Phantom 410-red
Cooler Master hyper 212+
Seagate Barracuda 1TB 7200.12 (original HD from OEM system)
Generic DVD-R/W (unknown brand/model)
I just got a new computer, new hard drive and everything. I attempted to install Windows 7 (full version, NOT an upgrade) by putting the disc in, starting the computer, and booting from the BIOS. The monitor shows a bar that says that the Windows files are loading. Then it displays the little Windows logo. And finally it comes to a blue-ish screen with a bird on it (which I have been told is the sign-on screen) with a cursor. Nothing else. I've tried pressing CTRL+ALT+DELETE and running Safe Mode. Nothing works.
I have heard that the solution might have something to do with putting certain drivers onto a flash drive. Is that true? If so, um... explain. If not, explain that too.
When I try to install windows 7 I get to the point where you have to select which drive/partition you want to install it on. This is when the installation hits a brick wall. I had recently backed up and reformatted a 270GB partition of my HDD and decided to use that to install my windows 7 on it. The problem is that when I try to install it on that partition it says that I don't have enought space even though it has 270GB free. I've tried running the setup from windows xp and from the disc via reboot.
View 4 Replies View RelatedJust upgraded all my hardware and windows needs reinstalling to reconfigure.Trouble is my existing dvd drives are IDE and my new motherboard has no IDE port. I have a copy of windows 7 on an external hard drive in the form of an iso and various files.Is it possible to plug it into a USB port and use the external to install 7 onto the internal? I'd rather not have to buy a Sata DVD drive.Would I need to wipe everything but windows 7 on the external
View 5 Replies View Relatedhow can i install win7 on a ext hd. I can boot win7 installation files from a ext usb drive, but i cant boot win7 itself.....
View 1 Replies View Relatedhad a really bad crash with laptop,so decided to format and add my windows 7 disc to do so but now when i go to setup it is saying it does not recognaise my harddrive?
View 12 Replies View RelatedTried to installed windows 7 on a new installed hard drive. A message comes up "Windows did not installed. Installed windows" After clicking OK the computer just continues shutoff and reboots. Showing computer administered locked
View 2 Replies View RelatedI have a 1 TB Western Digital Caviar Black hard disk. While installing Windows 7, a screen for hard disk partition was asked. I created 4 drives: 200 GB, 200 GB, 200 GB and 400 GB. And then the windows 7 got installed. But now when I log into my PC, I can only see first 3 200 GB drives. Where did my 400 GB drive go? What mistake did I do and how can I recover it back?
View 4 Replies View Relatedi was using win7 ultimate before and last day i tried to install a new win7 and in wich step that i had to choose a drive to install i sow this message "No drives were found. Click Load Driver to provide a mass storage driver for installation." but in the windows that i was using all of the drives was working.and i installed win vista and no messages like this i sow.
ram:4g
video: ati radeon hd 5450
cpu:intel pentium 4 cpu 3.00 ghz 3.01ghz
Recently I dropped my Acer Aspire 1420-2039 notebook damaging the hard drive.I ordered a new WD Blue WD2500BEVT.Unfortunately the week before I dropped my computer, I installed the Windows 8 Consumer Preview.So I downloaded an .iso file of Windows 7 Home Premium 64 bit, (What was originally installed on the computer when purchased) and downloaded the Windows 7 USB/DVD Download tool to re-install the OS using a USB Flash Drive since my computer does not have an optical disk.hen I get to the install screen, Windows will not let me select the hard drive with error 0x80300001 "Windows is unable to install to the selected location."Usually other forums suggest selecting the proper drivers for the drive, however WD does not have drivers available for download saying it uses windows' default drivers
View 5 Replies View RelatedI deleted the post because i realized thaT I had an older post here that came close to the same subject and no one replied - so i have no reason to believe anyone would reply to this one.
View 1 Replies View RelatedAlright, so after a few days of hardware checking I've determined that the cause of my computer being as messed up as it is is the hard drive.
Seagate's own SeaTools says it failed the drive tests, and I'm gonna have to call them later and get an RMA on it.
Well, how would I go about installing Windows 7 on my replacement hard drive? I've installed and activated it a few times on this same drive, but I think that's because the activation system detects the exact same hardware, therefore it lets me keep activating it.
If I put in a different hard drive, though, won't it see it as a different computer and deny me the chance to activate it? (Same goes with my OEM Student version of Office 2007)
So what would you guys suggest? Can I de-activate it from one computer then activate it on another? or what?
I have installed a few drives in my time. But something I do not understand has happened in drive manager in Win 7.Obviously I have to initialise a new drive before I can format and partition it, but when I go to initialise another box comes up and identifies the new drive and asks to I want to partition it with MFT tables?? Not seen that before I obviously dont want to move any boot partitions from my C drive.I have drive C with hidden boot partition, main active system partition and a data partition (logical).The new drive will be E, is 1TB and I want to partition into 4 logical drives. I know how to do it, query is what is the box that comes up and asks whether I want MFT or another version?? Is it safe to say OK.
View 6 Replies View RelatedI have pre-purchased a Windows 7 professional upgrade and am trying to determine my install options when it is available.
I am currently running Windows Xp pro and have a computer with 2 identical hard drives. I know I will have to do a clean install from Xp. I would like to install Windows 7 on the second hard drive and be able to use both Windows 7 and Xp until I am familiar enough with Windows 7 to confidently abandon Xp.
I have a hard drive switch that I will use to boot to the OS that I want to use. I elected to do this instead of using dual boot. Currently that switch is not installed.
I would like to install Windows 7 on the second hard drive, but am concerned that I will need to verify that I have an authentic copy of Xp for that to work.
Will there be options during the install so that I can select the second drive as the place to install Windows 7 (and make it a bootable drive)? I would not like to get into a situation where I would be overwriting Windows Xp on the drive I currently boot from.
So I been trying to follow this guide, but it hasn't been working. I set the computer to boot from usb and then it will just sit there. I tried with an empty flash drive and it would say no bootable table or something similar, so it does detect my hard drive having something bootable and fails.
So far, despite following the directions, when I try to boot from the external hard drive it just hangs there and the screen never opens (unless I need to really wait a really long time).
It seems the missing detail is likely that I have to make the hard drive bootable.
However, so far, all the guides that talks about making them bootable requires to clean the drive (well flash, but I guess hard drives requires that too). That defeats one of the biggest selling points in this guide, no need to delete any files (also to note, I seperated the hard drive into two partitions as directed, the cmd only see them as one). So how does one make it bootable without clearing all the files.
Update: How to make your external HD bootable It seems that it should work for that person, I don't understand what is my problem. When I try to boot from USB, it just hangs there and the Windows7 setup never appears.
Another thing to note that this laptop is a dell 1520 which is powerful enough for the 64-bit, though currently I think it is on 32-bit vista.
In my 8 years of serious computing, I have never had to replace a HDD but I am going to have to do it for the first time sometime earlier next week when the new one along with the recovery media from Acer gets here.I have managed to locate a service manual for my Acer Notebook model series here.The new HDD is a WD500BPKT @ 7200RPM The old HDD is a WD3200BEVT-22ZCT0 @ 5400RPM Will I need to install new drivers (SCSI etc.) or anything else, or is it a simple plug-and-play operation once the recovery media is booted off of the disks and installed?I suspect I will need to change the BIOS Boot Order so that the opticle drive is first rather than IDE 0 to get the disks to come up, so that's a non-issue.
View 9 Replies View RelatedI have a quad core i720 intel processor and the asus p6t deluxe V2 motherboard and a basic 512 video card. I installed Vista 64 bit first - took about 50 minutes. Then installed Windows 7 RC1 on a second hard drive (dual boot) and it installed in 20 minutes.
It couldnt find the divers for chipset but shortly after it said I didnt have them installed (they werent available on the mb setup disk nor on Asus website) and it asked if I wanted them installed and windows installed the drivers. Much more intuitive.
Also I looked at the processes running on initial startup - I had perhaps 8 on windows 7 and perhaps 25-30 on vista. That alone made me a believer.
Now it wont run all of the software i would like to run (some antivirus and antispyware - spydoctor - zonealarm etc) but that was the same thing initially for vista. Oh superatispyware ran from the get go on vista and does on windows 7. I cant figure out why other antispyware and antivirus companies hem themselves and make a product that is so OS version specific.
Overall I am impressed with windows 7 - far less processes running in the background.
The beta of win 7 crashed when I tried to join my domain. Had to reinstall then I left well enough alone. The RC1 joined domain without a hitch. Less trouble than either XP or Vista.
Runs my business programs just fine. been testing those for a month.
Also pleased with the try before you buy concept. I can use the win 7 setup thhrough may 31 2010.
Would like to see the price of the OS come down a bit. Close to $300 is a little steep to convert more of my machines to win 7. I am running a laptop with vista, 2 desktops with vista. and three desktops with XP.
I currently have Win 7 Home 32 bit installed. I will be upgrading my system and using a new Sata hard drive.I would like to install my Win 7 retail upgrade disk [ the 64 bit version ] on the new drive.Can I do this? If so what would be the easiest way to retain all information from my current 32 bit drive?
View 9 Replies View RelatedI have a bit of a strange question about installing the Windows 7 upgrade. I'll try to keep it as simple as I can. Firstly
1: I currently have Windows XP SP3 Home Edition installed (and activated) on my 160GB WD Caviar Blue hard drive, which has 8MB cache. It's getting a bit full now.
2. This hard drive is one of the few remnants of a Dell machine I bought a few years ago.
Surprisingly, the restore disk still works and activates, even though I've changed the motherboard and a number of other things over the years. My last reinstall was about a year ago, and I had no problems reactivating whatsoever - I didn't even need to phone Microsoft.
However I doubt it'll install and activate on a new hard drive - particularly as I've also changed the DVD drive since my last activation (as the old one broke), literally the only things remaining from the old system would be the RAM and the processor.
2: I have purchased a 500GB WD Caviar Blue with 16MB Cache
3: I intend to buy Windows 7 Pro Upgrade from TheUltimateSteal for £30. I'm a student, but will be graduating soon, so it seems sensible to take advantage of this offer while I can.
4. Clearly I can install Windows 7 in the normal way onto my current drive and use the 500GB drive for backing up my files, which I'll do if that's the only option.
5. However, if I did that I would not be taking full advantage of the extra cache of the new drive. It would be nice if I could use that for my primary installation to speed things up a bit.
So here's my question:
If I start the upgrade process having booted from the 160GB drive, but during installation select my 500GB drive as the target for the installation, will Windows 7 install and activate correctly? Will it recognise the pre-existing installation, even though it was on a different drive?
If not, then:
If I install my Dell restore disk on the new drive, and don't activate Windows (which presumably I won't be able to), and then run the Windows 7 upgrade on THAT drive, will Windows 7 install and activate correctly?
Basically, is there a legitimate way of installing a Windows 7 Upgrade onto the 500GB drive, on the basis of there currently being a valid XP installation on the 160GB drive?
I have no intention of continuing to use XP after the upgrade, if I am able to install and activate Windows 7 to the new drive, then this will serve only as a backup for my files.
Has anybody tried something similar and succeeded/failed?
I've already read the tutorials on here about doing a clean install of Windows 7. I'd like to avoid dodgy workarounds, as I'd rather not run into problems further down the line when it comes to updates and that sort of thing.
I tried installing Windows 7 64 bit OEM on a fresh hard drive but it kept crashing and now when I try booting the system seems to think Windows is installed saying ''Windows failed to start'' in boot manager. I even tried loading the computer up with a different hard drive but it STILL says that!
View 1 Replies View RelatedI am very lost, I have a IBM ThinkPad T42 with an older 20Gig hard drive that is blank, no OS on it, nothing at all. I tried to perform a custom clean install of Windows 7 and get to the part where you can format the drive or install drivers. When I select to install the drivers it can never find any.
What am I doing wrong? I know a little but I guess not enough, do I need to install fro somewhere else? and what drivers is it looking for?
I know that you just have to plug an external hard drive in to a computer and it works right away. My problem is, I used my external hard drive so I could tape TV shows on my Bell Express Vu receiver. I disconnected the external drive and want to use it on my computer but for some reason, I can't get it to work. It shows up under Devices and it's called "Desktop". Can't see what's on it or even open it. Normally they will show up under the same area as you other drives but it won't this time.
View 3 Replies View RelatedI have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies View RelatedSo, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
View 9 Replies View RelatedI have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
View 2 Replies View Related