I was reinstalling Windows 7 on my friends computer after he was told by Dell he had a major virus and he needed a fresh install. With that being said, once the new installation was done, we noticed it was on the "D" drive (Recovery) and not the "C" drive.
View 1 Replies
Let me explain my computer to start with. Handmade from bare bones, windows XP SP3. I also have backup images (ghost, acronis, etc..) of the system. Then I installed Windows 7 to a second hard drive and had it set as a dual boot - worked perfectly.THEN...... I restored an HDD image made prior to installing Windows 7, and now, I do not get the dual boot options at boot up. Boots directly int XP as had in the prior HDD image. I still have Windows 7 on the 2nd HDD. How do I get to it, or set my boot drive to recognize the Windows 7 on the 2nd HDD. Or can I ever again boot off it?
View 5 Replies View RelatedI have a 1T SATA system drive and a 1T SATA working drive. I installed a 3T SATA storage drive, and now my system won't boot from the C:. I have to go into the BIOS and boot from there, or use a boot disk. How do I get the system to boot from C: again?
View 3 Replies View RelatedI have a partition question and after scouring the Web, can't find anyone with the exact same situation as mine. Basically what I'm wondering is if I can delete a primary partition and then extend another, non primary into that space.
Here's what I have and why I want to do this: my laptop came from the factory with one 500GB SATA drive, split into two partitions (C, primary, and D, logical, each 250GB). The Win7 install was on the C drive. Recently, I installed a 120GB SSD as a second drive, and using the tools with it, copied the contents of my existing C partition to the new SSD, and then made the SSD the boot drive labeled as the C drive. So far so good, everything works fine.
Now, what I'm left with is this: C: 120GB (SSD, now the boot drive with the Win7 install) D: 250GB (SATA, the original D partition, Disk Management IDs it as a logical drive, extended partition) E: 250GB (SATA, the original C partition, Disk Management IDs it as a primary partition)
So, I have the original "C drive" on E now... it's no longer the system/boot drive. Obviously I don't need the files on it as they are all on the new SSD. What I want to do is to delete all those files and then combine what's on D and E into one 500GB D drive as I have no reason to have the two partitions. Is it possible to just delete the E partition and then extend the D partition into the unallocated space? I'm confused because it seems as though the D partition may rely on the E partition being there since the E drive IDs as primary. Or would the D partition become primary?
I know I could just back up the D partition to an external drive, delete both D and E partitions, and reformat as one new D and restore the files, but I don't want to create more work for myself if I don't have to. Obviously I don't want to mess up the files on the D drive though, which is why I'm asking.
To boot up. Here's my issue I have a HP Desk top with a standard 320 GB hard Drive. I bought a new Hard drive (1 TB Western Digital) so that I could move everything to the new one and use the old one as storage. I had trouble even formatting the new drive but eventually got it and successfully installed a full version of Win 7. (The old hard drive has Win Vista with Win 7 upgrade on it. When I boot up the computer I receive a message asking which WIN 7. I want to use and actually either one works.
I wanted to format my old drive so that I would only have one Operating system w/ WIN 7 installed. I tried to format it (the old drive) at the command prompt, but alas it wouldn't let me. So, I opened the case and disconnected the power cord first and then I unplugged the SATA cable as well as the power cable to the hard drive. I tried to re-start the computer but now it says cannot find something, unable to read or error. So, I take it something is missing from the new Windows 7 install to my new hard drive?
I have 2 HDD, Disk0 and Disk1. Disk0 is supposed to have my personal data, Disk1 the OS. Disk0 has 3 partitions (H:/ I:/ J:/ ) and Disk1 has 3 partitions too (C:/ D:/ E:/ ).One month ago I installed Windows 7 but erased my Disk0 by mistake and probably (very unlikely though! see below) started installing on there when I realized something looked wrong, canceled, then formatted Disk1 and installed there, on the first partition (I blame the badly designed Windows installer, Linux does it better).Fortunately, I recovered my data from Disk0 (only partition tables must have got wiped out) after Windows 7 finished installing on Disk1 with a recovery tool.I'm about to format Disk0 now (at least the first partition) but I noticed something weird on my Disk0 (data) hard drive.I have system files, of which creation dates match the day I installed Windows 7 (and recovered my partitions too). Note: disregard found.000, that's a file chkdsk must have created back when I used WinXP or something.Note2: columns are "Date modified" and "Date Created", YY/MM/DD I'm new to Windows 7 but I'm guessing these system files I see here should be on my System drive, not another drive, right?Here is what I have on my C:/ where Windows 7 is installed:In such a case, will I have to either:
1) format C:/ and re-install Windows 7 ?
2) use recovery console and repair from there ?
why one drive (SATA) is Disk1 and the other (IDE) is Disk0. I had to fiddle in my BIOS to end up booting on the right one (which I suspect is Disk0!). If I ever had to remove my IDE HDD, would I end up not being able to boot Windows 7?Remark: I got suspicious of that when trying to encrypt my system drive with TrueCrypt and TC says it couldn't handle a system that "does not appear to be installed on the drive from which it boots".
[code]....
I recently bought a new hard drive with windows 7 home premium 32 bit installed. When tried to install it in my pc it would not boot up, I am assuming its because everything is new to it. I bought a windows 7 recovery disc but it has not worked. I did not get an install disc with the new hard drive.
View 5 Replies View RelatedMy company clones hard drives for deploying our software (each software comes with a new computer and a new windows license). We clone the drive to avoid installing the mother board drivers, windows updates, sql server, etc etc each time. This worked great with Windows XP but with Windows 7 we get a boot error on the clone: "Windows failed to start. A recent hardware or software change might be the cause. To fix the problem..." We are a small company and it really is a pain to re-install everything for each new release we do.
View 4 Replies View RelatedInstalled a Notebook drive now Windows 7 cant live without it & hid it. Had a notebook drive I wanted to back some file up on. I put in my Windows 7 computer now Windows 7 will no longer boot from C it will only boot if you go to the boot menu and start with this other drive. I cannot read the drive with any of the file reading programs. The drive shows in the hardware configuration only but cannot access it.
View 3 Replies View RelatedI have a computer with two (IDE ribbon cable) hard drives. One had a bad windows XP installation on it. I installed Windows 7 on the other. I formatted the drive before installing Windows 7.Then, I decided I want to use the hard drive with the bad winXP installation on it, in another computer (I will format it). When I opened the computer side panel, I wasn't sure which hard drive was which, so I unplugged the power to one, and started the computer.The thing is, it won't boot Windows 7 with either of those hard drives alone, only when both are plugged in. With HD #1 disconnected, it says "Can't find BOOTMGR, press a key to reboot." With HD #2 connected, I get asked whether I want Windows 7 or an older OS, and when I choose Windows 7, I get an error message, something like "Windows 7 failed to start. To try and repair, insert install disc, or use recovery mode, etc" With both HDs, I get asked the same question, "Windows 7 or an older OS," but when I choose Windows 7, it works. In my computer, I have verified that Windows 7's files are on one disk, and corrupt winXP files on the other.
View 8 Replies View RelatedJust re-installed Windows 7 after a hard drive failure. Windows 7 x64 Home premium . 2.4 Ghz Processor 4GB RAM . Cannot Install SP1.
View 2 Replies View RelatedFirst time poster here. I messed up big time trying to get my dell 1747 to dual boot in xp and win 7, i think. I installed xp on to an external hard drive via and esata connection. Now it won't boot without the external hard drive connected and of course will only boot in xp. The xp disc manager say that windows 7 is the primary os which confused me. I Tried the windows 7 recovery disc but it won't boot. I'm completely lost here, and I'm looking for the first step to take. AS it stands I have a C:RECOVERY, D:Fantom(my external to which i installed xp) and E: OS, why is E labeled OS? I could really use some help here.I can't uninstall xp in safe mode with administrator access. I'm wondering if i format the D drive containing Windows xp, if I will Automatically boot from my previous windows 7?
View 1 Replies View RelatedIf i have windows 7 on my c drive how do I load a program on my d drive?
View 3 Replies View RelatedI had windows 7 ultimate installed by a friend and when it was returned about 50G was missing from the drive.
I thought my friend had changed drives but maybe. how to get the 50G back?
why windows cannot be installed after hard drive replace?
View 2 Replies View RelatedI have a Machine with the Following Config:
Intel E2180 CPU
2GB Ram
Gigabyte GA-G31M-S2C Mainboard
Seagate ST31000340NS SATA Hard Drive Connected on SATA0
Operating Systems:
Windows 7 Ultimate 64Bit on HDD
Windows 7 Ultimate 32Bit Booting from VHD
I Installed Windows 7 Ultimate 64Bit onto Hard Drive as Per Normal Installation Onto the Hard Drive and Installation created 2 Partitions (1 System PArt and Another for C: Drive) Everything Works Great.m I Then Installed Windows 7 Ultimate 32bit Into a VHD. Setup Created a Multiple Boot Entry into the BCD so that when I Boot it Prompt Which OS I Want, I then Used BCDEdit to Change the Descriptions of the Boot Options "Windows 7 Ultimate - 64Bit - HOST" and "Windows 7 Ultimate - 32Bit - VHD" Everything still works Great.. No Problems.. Been Like this for a While Now and Perfect.
Now the Problem is that I Need to get some Data From and Old SATA Drive. I Shutdown .. Plugin the WD1600AAJS (160GB) into Another SATA Port (SATA1).. Turn Machine on and Press Delete to Enter Setup for Bios.. Goto Set Boot Device Priority and Ensure that the ST1000340NS Drive is at the Top (1st Priority).. Exit and Save Settings.. PC Goes through POST and Then Will not Boot.. it Gives "Missing Operating System" Shutdown Remove WD1600AAJS Drive.. Boots Perfect.. Reattach WD 1600AAJS Drive and "Missing Operating System" Tried Using "F12 to Select Boot Option" during POST to Select Boot Device.. Choose ST1000340NS ... and Still same Issue.. Remove the WD1600AAJS and Boots No Prob Off the ST1000340NS.
I thought that maybe it was the WD Drive.. so Tried another Seagate Drive.. and Same Issue..
I have set Every Available Option on The Bios to Choose the Boot Device and NOTHING Works.. I have Even swapped HArd drive SATA Ports .. still no Difference.
I have an Idea there is a problem with the BCD but I Cannot Edit or Add any thing to the BCD as it will not boot with the second drive attached. And When you edit the BCD it need the second drive attached to be able to Add a BCD Entry.
Asus cm5570-ap006 originally running vista premium and owner wanted an upgrade to seven. Bought a new hard drive b/c old one died. Mobo had trouble finding new drive but, after setting bios back to default(F5) it installed and finally got working.Owner gets pc and starts getting blue screening and saying theres an f1 drive error and wont wake up after suspending without reboot.So I get it running fine by removing avg(which is causing blue screen for some reason) and the it is now waking up after auto hibernation. But if you put into hibernation manually it wont wake. I update windows and it goes back to not recognising hard drive.Flash bios remove cmos baterry reset bios to default and set hard drive to ahcpi and it reinstalls fine update windows and it stops working. Use restore point to get it back and running and this time dont update windows and its running ok again. Shut it down for the night and the next day go to boot it up and there is no bootable media and now I am trying to reinstall Windows 7 and after it does it gets a no bootable media error even though it is
View 3 Replies View Relatedafter installing windows 7 operating system, i cannot use my external disk drive.everytime I insert a CD/DVD it recognizes it but does not run it.
View 3 Replies View RelatedTried to installed windows 7 on a new installed hard drive. A message comes up "Windows did not installed. Installed windows" After clicking OK the computer just continues shutoff and reboots. Showing computer administered locked
View 2 Replies View RelatedFirst, the information as it is. I had a hard drive issue that I'm working on currently, trying to recover I suppose what is a crashed hard drive. There are tons of errors on it, but that's not the question I have right at the moment, but some background.
I have tried to reinstall Windows on a brand new 2.5" Seagate 500GB 7200rpm HDD. I formatted the drive using the windows 7 ultimate installer and booted it using a USB booter made from the windows 7 download tool.
When I booted it up and tried to get it going, it gave me a hardware error saying "Windows wasn't able to configure the hardware and try startup repair" or something to that effect. I read around and it said that since my BIOS says the HD is in raid configuration that it needed some Intel Raid driver, which I installed and tried running, but it didn't seem to work. It says now "windows cannot repair this computer automatically". The problem signature is as follows:
Problem Event Name StartupRepairOffline
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
[Code].....
Primary HDD in the BIOS is recognized as 500GB RAID is On as well. Trying to install Windows 7 Ultimate 64 bit.
I happen to have reinstalled by mistake a new Windows7 OS on a drive (I had two drives one with an OS and another with a bitlocker drive used for back up, both drives were IDE drives and the bitlocker was under slave mode if that hosted very important data and was encrypted by Bitlocker. How to recover this formerly encrypted data? The drive is now recognized as an active healthy partition with an associated drive letter (different from the original one). I don't have the bitlocker key.
View 4 Replies View RelatedI have installed 7 SP1 32bit on my Dell Inspiron 1520. My installation drive C is totally 18.5 Mb and have 4.5 M.b free space. Is that enough free space or should I increase the size of the drive ?
View 2 Replies View RelatedI have a WD5000D032-000 pocket 500 Gig. It worked on my vista 32 bit home. I updated to windows 7 home premium 64 bit edition and now my computer can't read it. It is displayed under Device manager just not My Computer
View 1 Replies View RelatedBuilt a "super computer" with all the bells and whistles, did raid0 array OK installed Windows 7 ultimate on ssd 120GB drive.went to drive management found raid array, partitionnedit as 1 18TB drive without problem BUT when i tried to format it (quick since i suspect it may take days) and iwin sais failled to format drive.i will try to make a Loooong format and see what happens.
View 2 Replies View RelatedI have installed new windows 7, on my previous windows 7. Till that, I have saved my important files in Local disc D. Windows is installed on local disc C. But previous windows version moved moved to D disk. And my files, that were in D disk, have lost. What can I do for moving back my files, which are very important for me??
View 9 Replies View Relatedmy computer has been dead for the last few days so to speak. For two days ago I turned on my computer - it started up just like any other day. I saw the Desktop and bang, blue screen of death. This has not happened since I installed Windows on my new SSD Harddisk (I'm running with two disks, one SSD for Windows and a HDD for everything else), so I simply started my computer again. (My computer worked just fine last weekend, no problems at all. I had a Windows Update and then this happened..).During the set-up it stopped after the Motherboard-image - I had to chose between starting Windows Normal or repair it. Starting Windows normally does not help - it just give me BSOD right before or right after hitting the desktop. (Sometimes even before the Welcome-screen). So choosing to repair Windows during the setup is the only thing I can do.
By doing so, Windows searches for errors. I get the following error codes: 0x0 0x490 ..and some with 6 f's.(Today and yesterday I only got 0x0, which apparently stands for 'unknown').Hitting F8 during setup and loading Windows in safe-mode (/secure mode?) does not help either, I get BSOD here as well.I have tried to change the boot location (different disks and from CD). As a standard, its booting from my harddisk - all though it's booting from the wrong disk (the HDD). When I'm choosing the SSD I can't get any further and I get the message: "Missing Bootmgr..". The only way to boot the computer correctly (and maybe fix the missing boot manager) is by booting from a Windows 7 CD. I get the same two options (Normal / Repair) when booting from the CD though.. When I chose repair it seems to be fixing something - but in the end it says it couldn't find any errors. I have also tried to enter the following commands into the CMD: Bootrec /fixmbr Bootrec /fixboot Bootrec /rebuildbcd.The first two are completed with no errors or messages. The last one is unable to find any Windows installations (this happen when using both C and D).
I am able to use a safety backup copy which I took when I all out of sudden got access to the computer.. (Don't ask my why or how!), that is however not solving the problem, it's only allowing me to load the computer once. When it's loading it's checking the disk first and then loading normally -- I just tried that for a few minutes ago and my screen just turned black.
I have a Samsung R519 laptop, after installing windows 7 the dvd drive is not working. It is not shown in the device manager. Sometimes after a reboot it does appear in the device manager and I have tried to do the repair as stated on other forums, (remove upper and lower filters), but on all occasions there has been no upper or lower filters shown in the right hand panel. I know it is connected ok as I re-installed Vista and now have both OS and the dvd drive works ok in Vista.
View 5 Replies View RelatedSo I've decided that I want to use a Western Digital VelociRaptor 150GB for my Win 7 OS C-drive and my WD 500GB drive as my E-drive for files.
The problem is that I thought of this after installing it on the 500GB drive.
Will it be okay to reinstall on the new drive if I delete Win 7 on the old one?
If so, is it pretty simple to reformat a drive with an OS on it?
After installing Windows 7 on my laptop with great success, I decided to go for it on my desktop. I bought an Intel 160Gb SSD drive (S2 so I could use TRIM) and Windows 7 Pro. I did a clean install (obviously) and everything went well. However, for some reason, my PC (Self-Built w/ASUS P5K3 MB) does not power down when I exit Windows 7! The monitor goes dark, but the PC stays powered up.
If I put the Vista C: drive back into the box, it shuts down fine. I checked for BIOS updates on the MB from ASUS, but there is nothing Windows 7 specific, only updates for "newer CPUs".
I have made this huge mistake of installing Windows 8 Developer Preview on top Windows 7, with an .exe file. Downloaded from torrent.
It seems it has expired and the system restarts without a prompt every 2 hours.
I have all my files, programs and their paths, savedatas piled up in Drive D, so I'd like to format Drive C, and reinstall Windows 7. I have not made a system restore DVD the first time I opened the PC, back in Win 7. I have a Windows 7 Repair dvd, but it says it's only for Samsung computers, mine's Asus. And I have a 8 GB USB flash.
So can I format Drive C, where Windows 8 is installed on top Windows 7, and restore Windows 7? I have an x64 system, so do you have a verified x64 "Windows 7 boot from USB and install" iso file?
My HP Pavilion DV7 4267CL's hard drive went out last week. I bought a new one, the same brand name and specifications. I installed the drive, turned it on, inserted the first disc, restarted it and follow the prompts. I selected to reset factory default and continue to follow the on screen prompts. After installing all four discs, it restarted by itself and gave me an HP logo. It ask me to restart to complete installation. When it restarted again, it gave me a bootmgr is missing press ctrl+alt+delete to restart. I pressed it and it gave me the same error again. I did all the reinstallation 3x but no luck. I was getting the same error. So, I went to the bio boot utility by restarting the pc and preesing F10 while booting. I rearrange the booting sequence, dvd/cd rom drive, internal computer hard drive restarted it, inserted the first disc, turned off pc and reinstalled it and all 3 other discs. But at the end, I'm still getting the same error.
View 4 Replies View Related
