Copying A Windows Backup
Nov 4, 2009
I have a system Image Backup of my C drive. It is located on a USB portable drive. I want to rename this backup. If I do rename it and later need to use it will I have problems?
That is, I renamed the folder from WindowsImageBackup to WindowsImageBackup_2009_11_03. If I ever needed to use it to restore a file, I'm supposing I can just change it back to WindowsImageBackup and all will be well. But this is a supposition on my part. I would like to find out now if there are problems, rather than later.
I am a little concerned because Windows 7 seems to be picky about the MediaID file. I wonder, for example, if I mount the backup after giving the WindowsImageBackup the new date specific name, I say, I wonder if this is going to affect MediaID. My nightmare is to think I am set up in case of an emergency, only to find that something like this is not in place.
View 7 Replies
ADVERTISEMENT
Mar 24, 2012
I have a folder that I'd like to periodically mirror to an external hard disk. How can I easily copy the source to the target, deleting files now deleted in the source, updating files that have been changed in the source, and adding new files to the destination. Would an XCOPY with the appropriate set of switches do the trick - maybe something like
xcopy c:sourcedir d: argetdir /e /h /o
View 3 Replies
View Related
Jun 16, 2012
Trying to copy "user' folder to a back-up disk drive but informed: "Action can't be completed because this file in open in the system" ???
View 6 Replies
View Related
Nov 23, 2010
I've just recently realized that copying folders to a backup hard drive resets their "created" date. Should my computer ever crash, all my backup files will state to have just been created on that certain date. Me, being the organize-freak I am, have been looking for a solution so my backed up files can have the same time stamps as on my computer right now. I've done a little searching, and have found that people always recommend Robocopy. Problem is, I can't understand a word of the tutorials. How to run Robocopy to carry out what I want? And also just for the heck of it, is Robocopy the only solution? Is there some sort of back up program on Windows 7 that can do that?
View 3 Replies
View Related
Aug 23, 2012
When you wish to recover your system using this utility, do you use the Windows program at desktop or the rescue disc I created from the program?The reasn I ask is because I used to have better luck using Acronis' disc rather than the program and wonderd if the same applied here.Also, does the backup remove the existing one so that you only have one at a time or can you have more than one.
View 2 Replies
View Related
Nov 1, 2010
Is there a way to use Windows Backup to backup to a network drive?
View 6 Replies
View Related
May 8, 2011
I backup 100GB of data with Windows Backup and over the time where I do all my backups there is like only 30GB of data which changed from those 100GB and also new files were added. Now my external drive is full. When I now delete the very early backup, the first one where the 100GB of data was saved, will it delete then ALL those 100 GB, or will it just delete the previous versions of the files which were modified AFTER that time, which are in this case the 30GB I talked about? Because otherwhise I would then have in the end an uncomplete, messed up backup.
View 9 Replies
View Related
Aug 8, 2009
I currently use Vista Ultimate. I am preparing to move to Windows 7. Is it possible to restore files from Vista Backup and Restore Center to Windows 7 after a clean install?
View 3 Replies
View Related
Dec 7, 2010
I'm using Win 7 Pro and want to schedule several backups to my NAS. With Win XP, I was able to schedule multiple backup jobs, which makes things easier since I have 116 GB of data. I like to backup my documents, email files, etc. every week, but my photos, MP3s, etc. don't change as frequently so once a month is fine for that. Not surprisingly, the media collection takes much longer to backup, which is another reason I try to separate it from my "regular" backup.Unfortunately, Win 7 backup only seems to allow one backup job to be scheduled, which seems awfully limited. Am I missing something? Are there other free backup utilities that would work better, or do I need to shell out some cash?
View 4 Replies
View Related
Sep 23, 2012
how do i copy all of my iTunes data/music onto my external Hard drive, then download iTunes (empty with no songs in it yet) on my new win 7 pc. and then copy my iTunes music from external HD to new iTunes? i tried i couldn't seem to copy music to External HD.
View 1 Replies
View Related
Oct 16, 2012
I have just purchased a new laptop with Windows Home Premium installed. I would like to copy from cd's I made from Microsoft Works on my old laptop which had Windows XP. What is the easiest way to do this if it can be done. install Microsoft Works on my new computer?
View 3 Replies
View Related
Apr 28, 2011
I have a brand new windows 7 home premium package and I would like to install on it on my laptop (windows xp). The cd drive however does not work and I was wondering if I could load the contents of the disc on my desktop and save them onto my USB stick, which would then go into my laptop?
View 8 Replies
View Related
Jan 21, 2011
copying a file to a Web Folder in Windows 7.I am able to connect to the web folder and see the subfolders. I am able to copy a local folder to the web folder as well. The only I am facing is when I am trying to copy a file. I am getting the error 0x80070057(The Parameter is incorrect). I have checked with fiddler and it does not look like its a server side issue. And I have also tried stopping most of the services as I read on the net that having 'Kaspersky' enabled and running interfered with the I/O for webdav.
View 1 Replies
View Related
May 8, 2009
I use a RT61 wlan card for which the winupdate got a new driver just a week ago.Now everytime i try to copy something to my second computer which is VistaHomePrem sp1, my computer freezes with no event log message.Everything else works fine (fe. uTorrent, emule, www, etc.).
Specs:
Windows7 x64 r7100
6Gb ram
P35
c2d 8200
View 7 Replies
View Related
Jun 1, 2012
I have a windows 7 install disc (DVD) but am trying to install on an HP100 mini. The mini has no DVD drive and I understand I can get one but I have a USB HDD from which it will boot. Is there a way to move the DVD image to the HDD in such a way that I can boot from the HDD and do the install?
View 10 Replies
View Related
Apr 13, 2012
Currently my PC is set just they way I like so I thought I'd do a backup, the idea being that should something go wrong then I can just use that backup (on DVD's) to do restore my PC to the 'now' settings.
View 3 Replies
View Related
Oct 19, 2011
Windows 7 Backup always stops around 58% when it tries to backup "Boot (C" What should I do?
Windows Sicherung bleibt stehen bei 58% bei Systemabbild von "Boot (C" wird erstellt.
View 2 Replies
View Related
Jun 3, 2011
When trying to copy a folder from Server 2003 to my Windows 7 64 bit it ends up freezing but I tried it on a xp computer nearby and the folder copied over in a minute.
View 2 Replies
View Related
Nov 6, 2012
Destination Path Too Long when Copying I copied my data folders/files from my winXP C-drive to my external hard-drive & then to my new win7 C-drive. After about 20-25 minutes of copying (with 5 seconds remaining) ... I got the attached message ... (2 found) ... I clicked Skip ... same message again (1 found) ... I clicked Skip ... same message again (0 found) ... I clicked Skip. "You can shorten the file name and try again, or try a location that has a shorter path." I compared the "JAR Control Panel Buttons" source & destination folders & found 3 files that were not copied. Not knowing how much too long the paths were, I guessed & they copied OK with shortened names.
View 1 Replies
View Related
Dec 10, 2012
I'm using windows 7 home premium on an asus laptop. Whenever I use windows explorer to look at files it'll crash. It starts to crash much quicker when I am copying documents. It closes itself down the restarts fine. I have done a SFC /scannow which shows that only the Chinese mandarin language pack is corrupt.
I have also wiped the hard drive before which solved the problem, it then came back so I have just wiped the hard drive again. This time it has not fixed the problem. I am thinking of upgrading to Windows 8 while it is on offer but wanted to get my laptop fixed before I upgraded it, alternately will installing Windows 8 fix the problem completely because it is a brand new OS?
View 14 Replies
View Related
May 15, 2012
I received a Crucial M4 128GB SSD and today have been trying to copy a Windows 7 partition across to it using the tutorial on the How To Geek website which seemed to be fairly comprehensive. However, although I managed to get to the point of creating a partition and setting the alignment I can get no further. The snag seems to arise in that the instructions tell you to create a primary partition with appropriate alignment etc. But then when it comes to copying the partition, the program (Easeus Partition Master) says it must be unallocated space.
I've also tried this with Partition Wizard but the same applies - it must be unallocated space. Although I could copy across the partition to unallocated space, goodness only knows what the alignment would be thus probably reducing SSD life and slowing the performance in the process. Any reliable way in which I can copy the Windows 7 partition whilst retaining the alignment. I should also add that I am fully aware that a fresh install would take care of the alignment for me but we want to avoid the hassle and time (probably days since this is my husband's PC) involved in a full re-installation what with the drivers and all apps and their settings etc.
View 8 Replies
View Related
Oct 13, 2012
I have two laptops on my network both wireless, I also have a WD Live Hub on it too but that's hard wired into the router.
When I copy over large files to the WD box from either PC, sometimes more often than not (randomly) it will at some stage just reboot the PC, no warning nothing, Just windows restarts. I can then start the copy off again and it might work it might not.
There is no set pattern to this and its annoying that if you walk away while copying then you don't know if the copy is 100% successful because you come back and the machine is stilling there with nothing on the desktop and quite happy. Has the copy finished or has the machine restarted!?! I have to leave another window open to be 100% sure.
The second laptop is slightly different to the first in that does a BSOD memory dump when it happens and then reboots once its dumped 100% of the memory, where as the first just restarts instantly.
I don't know if anyone else is having or had this type of issue, is it because its the 64bit OS? I'm sure before when I had XP on both machines this never happened so its only since I upgraded them to 7 64bit but that was a long time ago.
I only get this issue when copying files to my WD box, the rest of the time - playing games, browsing the net, watching movies, the laptops are fine...
View 3 Replies
View Related
Mar 2, 2010
Yesterday I needed to copy some data stored on a DVD and it took more than ONE hour to transfer the files (11250 files and 151 folders for 625MB) to the hard drive.
I booted on my WinXP partition (so the very same hardware was used) and it took 20 minutes for it to complete the same task.
The data I needed to transfer were full of very small files and although I could hear my DVD player spinning at full speed on WinXP, it was very choppy on Windows 7 as if it was constantly seeking the files on the disc.
View 9 Replies
View Related
Mar 29, 2011
I have an enigma with my PC. When i try to extract big files, copy, or install (games or anything) my pc becomes irresponsive and generally very SLOW. For sometimes I even cannot browse on internet, because firefox becomes very unstable.Recently i bought Assasin's creed brotherhood and while i was installing my pc was almost usseless. After installation i started the game and it was NOT playable, even the menu was usseless (cursor was very laggy, and impossible to control, and everything worked maybe at 2-3Fps)Strange thing is when i start task manager (c-a-d) my cpu ussage is at max 25% and memory at 55 max)notice that I can play assasin's creed 2 all maxed at 1920x1080.
Intel Core 2 Quad 6700 (2,66GHz)
ASUS P5P43TD Motherboard
2GB DDR3 1333Mhz
Seagate Baracuda 160GB (system) and WD Caviar 320GB (storrage)
Saphire Ati Radeon 5770 1GB
View 4 Replies
View Related
Dec 26, 2012
I just did an install of W7 on a new partition. I was trying to carry my Firefox settings from XP to the new install in W7. I followed some instructions I found online and copied the Profile folder for FF and merged/replaced it with the one in W7.Now the Mozilla Profiles folder is read only, and I get an "Access Denied" message if I try to change it. I also can not "take ownership" of the folder or change any of the security options.
View 2 Replies
View Related
Jan 28, 2012
I recently moved from an XP system to WIndows 7. Under XP, I could easily copy any EMail from Outlook Express to any other location on my hard drive, like My Documents. I'm now using WIndows Live under Windows 7, and see no way to do that simple thing.
View 3 Replies
View Related
Jan 31, 2013
I have 2 internal-sata hard drives(320 gig. And 2tb.) and 1 external usb/2.0 hard drive (750 gig.). The pc is an old dell gx520 tower with a fresh install of Windows 7 pro. No antivirus, network connection, or firewall enabled. Processor is a Pentium4 running 3 GHz with 1.5 gigs of ram. This is the problem: If I do a search on the 2tb. Drive for all of the jpegs, I have a total of about 84000 pictures. When I select all of the pictures and right click-copy and try to paste to another hard drive the pc will lock up and won't display a copy status window. Windows says it's not responding. Now, if I right click-copy a single folder which has anywhere, from a few files to several hundred gigs. of data in it, using the same 2tb. Drive, it will copy over to another drive just fine. I have tried, changing the swap file from "windows managed" to, up to 20 gig. Thinking the search was maybe having to write to the swap file. This didn't work. I also booted in to safe mode and tried to do the copy from the 2tb. To the 320gig. drive and still no difference. I have tried this with windows copy handler and teracopy. It all has something to do with the fact that I am doing a search for the files before copying them.
View 1 Replies
View Related
Dec 9, 2010
The notorious (or at least I think it is,) "Copying-files-phase-instantly-cuts-to-100%-then-gets-stuck-at-expanding-files-0%-and-fails-after-some-time" bug.I'm almost to the point of challenging my computer fist to a fist-fight.The story: I ordered my Gateway M285-E Monday, and I just got it today. I was so happy to see that it already had Windows XP Tablet Edition installed. Of course, I'm one of those "f*** that noise" kind of people. I formatted the hard-drive from the Windows 7 installer, and upon starting the actual installation process, "Copying Files" jumped to 100%, and went directly to Expanding Files......which hung at 0%, until it gave me the usual error telling me that the needed installation files couldn't be found / located etc.
So I thought, why not install Windows XP? Didn't work either. The installer wouldn't recognize the hard-drive. Wonderful. So I sat in angst, staring at the beautiful machine that had just ruined my day....I installed Ubuntu 10.10; worked fine. Absolutely flawless.I CANNOT install ANY version of Windows. It just seems impossible. Windows 7: Failed.Windows XP: Failed.Windows ME (I was desperate):Failed.And after formatting again, Ubuntu 10.10:Worked.System specs:Core Duo @1.86ghz1gb RAM (soon to be 2gb)60gb HDDATi Radeon x1400 graphics
View 1 Replies
View Related
Dec 22, 2011
I am working in Windows 7 XP Mode, trying to install and run a Microsoft utility called: WT1230: Batch File Converter for PowerPoint for Windows 95. (See WT1230: Batch File Converter for PowerPoint for Windows 95). Yes, the utility is intended for Win95, but I'd like to see if I can get it running in XP Mode. The utility installation instructions ask that I copy 2 files to the "Windows/system" folder. Of course, these instructions were written for Win95, not XP, let alone XP Mode. Still... if I copy the files, the core executable runs fine, but it can't find the 2 files that should be in "Windows/System". So, I gather XP Mode must have its own Windows/System folder.
View 1 Replies
View Related
Apr 22, 2011
When I try and copy files from my Windows 7 Home PC to my Windows Server 2003 share, it copies so much then hangs the Server sharing. It then appears that the share has disappeared.If I copy from the Server 2003 to 7, it copies fine, and copying from XP to 2003 also works fine.I had a chat with a colleague who told me that he has the same problem copying from Vista to XP.
View 1 Replies
View Related
Aug 9, 2011
I created an image using the Microsoft Backup and Restore tool in Windows 7. I saved the image on a network shared folder.I then went to the Advanced Recovery Methods in Windows to restore my image...that I just created. It restarts the computer and goes into recovery mode, I point to where the image is located, I entered the network credentials and it give me an error. "The Specified network resource or device is no longer available. (0x80070037)"
View 5 Replies
View Related
