Copying Image From Web To MS Word - Connecting To Server?
Jun 11, 2011
Whenever I paste a image from web into MS word, MS Words says connecting the server for information, please wait or press Esc to cancel, sometime the copying takes anywhere from 30 sec to 1 min or more. Whats the purpose of connecting the server.
When I want to copy a text from a web page into Word , it will not copy the FULL page. From left to righ,t it will cut off about 10-15% of the document on the right side of the page.. I tried moving the arrows on the top of the page and it doesn't seem to help.
We update our client's software *.exe programs by storing the update code in a blob record in a server based MySQL database.
When the user logs on to the main program on his PC, if there are updates, a dialog message displays and the updates are written from the server to the local directory -- the same directory as the main program resides.
This has worked very well on XP (where we used *program files* as the directory). It has also worked fine in vista and 32bit windows 7 (where we use the user's app data oaming directory.
On Windows 7 64-bit however, the update fails. It opens the file name of the updated program with zero bytes and then displays the message:
"Could not write to... c:Users[user]AppDataRoaming.. etc."
I've tried running the main program as administrator. I've turned off UAC. I suspect this is a security issue, but is there any workaround?
Suddenly, whenever I copy anything in Word 07, the copied text is bracketed with square brackets. They are gray color, and they are not reflected in the clipboard contents, so I believe they are non-printing characters.I have never had this happen before, and can't figure out what is going on.This occurs when using the mouse or CTRL-c to copy. It shows in Print, outline, and Web views.
When trying to copy a folder from Server 2003 to my Windows 7 64 bit it ends up freezing but I tried it on a xp computer nearby and the folder copied over in a minute.
When I try and copy files from my Windows 7 Home PC to my Windows Server 2003 share, it copies so much then hangs the Server sharing. It then appears that the share has disappeared.If I copy from the Server 2003 to 7, it copies fine, and copying from XP to 2003 also works fine.I had a chat with a colleague who told me that he has the same problem copying from Vista to XP.
I Image my C drive on the 2nd partition of the same drive. I then copied the image to an external drive. If I lose my drive that my C drive is on and then replace it with a new drive can I Image from my external drive to the new Hard drive and it will be the same size and make? The reason for this question is my image will be coming from a different drive than it was image to.
I need to connect to a DNS Server over the internet. I have tried setting the DNS as the server IP but I really don't know what I'm doing when it comes to this. The server is running Server 2008.
I am trying to connect PS3 to Media Server. I have already established a wireless connection for PS3 updates etc...but cannot connect to Media Center. The system recognizes my home PC network, I am able to go to all the Playstation sites etc.. but I keep getting the following error message when trying to share files from the PC:"Access to the Media Server is not allowed, it is possible that the system name for this PS3 system,", has not been registered." Check the settings for the Media Server."I have seen such as thing as a Media Center Extender referred to for the XBox 360, but not the PS3. Is there one? Do I have to purchase something else? I am trying to use the PS3 to access my PC for Picture and Music files.
I have been trying to install a 3rd party download program. I download the install files, program runs, asks me for login info, I enter the login info and I get, can not connect to our login server error.I run the same program at work on windows xp and I have no problem. I ran another program on windows 7 and I get the same error, can not connect.I shut down all firewalls. I disabled vpn, not running - using main proxy.Used different modes in windows 7 - windows xp, windows vista. Nothing seems to work.Do I need to shut somthing off or turn somthing on? it seems that I cant connect to outside program servers (their login).
After connecting VGA to VGA connection for lap top with windows 7 to HDTV and scrolling to PC designation on HDTV set, a message comes up "no device connected/no signal".
Can you tell me what setting on Windows control panel I should use? . . . or what other issues must be checked.
I am using outlook 2010 and recently have started having problems connecting to my exchange server account. It has been running hunky dorry since I installed it a few months ago.Now it occasionally connects to the server but mostly shows "Disconnected" all my other email accounts run correctly. Its not the exchange server as my phone and web exchange connect OK, my laptop is running 2007 and it connects OK.
I recently upgraded from windows XP to 7. The problem is I can no longer connect to my shares on the server. Windows prompts me for a username and password and once I input this info, the same prompt shows up again.I have realised the domain it uses in the prompt (for username and password) is the same as the machine name and I have no field to input the domain manually.
How can I create I .reg file or command line to change between connecting with a proxy server (address: proxy or 10.22.12.12, port: 8080) and directly?
I have a problem with Microsoft Word 2010. When I save the file as PDF file, the Word 2010 saves the file as PDF but the background image is in tiles, instead of stretched. Also, in the document, the background image is stretched. But when I save the document as PDF, it applies the background in tiles.
I am testing some of our computers on our school system and got to the stage of joining it to our domain. They joined fine but the domain had never been connected to vista or windows 7 so it tried to upgrade itself. This crashed the server because it only had permission to change the sub domain.
I normally use Word 2003 for documents, although I use Outlook 2010. This morning I opened a Word 2010 document and after quite a while of some sort of an installation, I was able to open the Word 2010 document. I did not think too much of it, except that later I was sending an e-mail and attached a Word 2003 document and when I went to check it (i.e. open it up) it opened in Word 2010. How do I disable Word 2010 as my default program to open Word documents. I do not want to uninstall the program, but at this point I am not ready to learn how to use Word 2010.
Have been using WORD 2007.But, I just downloaded and installed Open Office. But I only want to use it for its Spreadsheet.However, it looks like its word processing component has taken over.Now, my WORD documents are being opened by Open Office which I do not want.How can I make WORD the Default word processing program (again)?
I am trying to set up a home server with filezilla server. I am following this site's tutorial to help secure the data flow: [URL]. After doing all of this, I get an error saying "Invalid IP address/range/mask".
Have been a LONG LONG user of Linux as a server (hosting VM's XP / Windows 7 mix) and file / print sharing.
I used to avoid MS like the plague as far as SERVER environments are concerned - probably because my first experince was Windows NT (Windows NeanderThal or Windows No Thanks) which was SO HORRIBLE that it put me off Windows servers for ages.
(Note I'm using a server in a HOME environment where we have around 8 machines (most of which are actually mine for testing -- not a corporate environment which has other considerations).
The problem now with the latest Linux distros that they are trying to be "A Better Windows than Windows". You can of course customize them but I haven't got the time or patience to do this any more. To select what packages to install / leave out now is a 100% pain and if you do it wrong the chances are the system will give errors.
I've looked at the new SUSE 11.2 -- slick and polished - bit I don't NEED "an alternative Windows".
I've just been looking at Windows Server 2008 R2 (got it from Technet) and I'm REALLY IMPRESSED with it so far. I've installed the STANDARD version - you don't need datacenter or Enterprise version for a home server.
It runs vmware server on it just fine (although I might go the whole hog and use the Hyper-V virtualisation -- need to do a bit more research).
I'm quite happy letting MS do the updates than having to mess around with Kernel compiles etc.
Incidentally as a HOME server there are some considerations that you might want to do to make it more like a Desktop OS than a pure server for example add multi-media to it.
This guy does a great job at this .
Convert your Windows Server 2008 R2 to a Workstation! - Multiboot Installation
Windows 7 VM's run just fine on W2008 server (they should as there is a lot of common code).
OS: Windows 7 Home Premium 32 bit The windows system image backed up on my external hard drive (2TB WD USB3) is not showing while restoring the PC from an image.
The only option available is my hard drive partition on which i also had saved a system image. Though windows recommends External hard drive for backing up image when backing up the system.
I need a little help figuring this out. I made a backup image a while back on my network. Now that I want to re-image, I reboot as requested, wait for it to load, and Windows says it can't find my backup, "if it is on a network, close this window , type the network location."Putting in the network location does nothing, I'm just returned to the screen where it would list the backup image if it had found it, but there's nothing there.Thinking perhaps my NAS was the problem I copied the image onto a portable hard drive, but after rebooting into the restore program, Windows 7 doesn't find the USB drive.
With either of these two Products, if I create an Image will the Image "include" everything on the Partition?What I'm asking is, in the event I "delete" something from a Partition, and presuming the "deleted" item is not overwritten, will the "deleted" item be part of an Image created AND restorable by Windows or Acronis?
how I can copy my Favorites from one PC to another? I've just had a new PC that's running on Windows 7 with IE9 and I'd like to get my Favorites from my old PC that runs on XP and IE8.
I'm being a little lazy and I know the answer already, but I'm asking anyway in the vain hope.....
One of my HDD's is failing quickly and I 'suspect' that it's the current drive that the beta is installed on (although I'm still not certain) and rather than go through all the nuisance of partitioning / installing on another drive, is there a way to copy the current install (6801) holus bolus to another drive and repair / modify the boot records / registry to make it function?
Alternatively, could I make a bootable image and use that to re-install on a new drive? I've never created an 'image' so that's new territory for me.
As I said, I doubt it's possible but as I've already spent days 'setting up' 6801, I really don't feel like doing it all again so soon, but the way my rigs been acting up, I may not have a choice.
(I've already installed a total of 5 fresh installations in the last couple of days and it's getting time consuming and tiresome)
Tech Support Guy System Info Utility version 1.0.0.2OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bitProcessor: Intel(R) Pentium(R) CPU B970 @ 2.30GHz, Intel64 Family 6 Model 42 Stepping 7Processor Count: 2RAM: 6068 MbGraphics Card: Intel(R) HD Graphics, -1988 MbHard Drives: C: Total - 595370 MB, Free - 531224 MB;Motherboard: TOSHIBA, Portable PCAntivirus: McAfee Anti-Virus and Anti-Spyware, Updated and EnabledCan I make a reliable "ghost copy" of my hard drive that could be copied into a new hard drive. I have a separate external hard drive doing regular backups but the backup copies don't include programs or the operating system.
I have a folder called Mystuff on the Desktop which contains all my files. I try to copy to a folder named Backup on Drive D, but it wants to copy only files that have changed since my last copy.I have tried doing a 'send to' to Documents but it does the same thing. How can I copy all files in the folder to Drive D then to USB Drive H? It seems I was able to do this up until recently has something in WIN 7 changed?