Create .reg File To Change Between Connecting With Proxy Server?
Nov 9, 2012How can I create I .reg file or command line to change between connecting with a proxy server (address: proxy or 10.22.12.12, port: 8080) and directly?
View 3 Replies
ADVERTISEMENT
Internet Through Proxy Server?
Jan 29, 2011I am using internet on my office computer through proxy server address which is configure in my internet browser LAN setting. My network adapter configure wit static IP address, Sub-net mask, default gateway & preferred DNS address,For as test, I change IP address in network setting then checked, my internet was not working?i changed only last one digit of IP, for Expample
Original IP 172.16.55.50 Work
Change IP 172.16.55.51 Not Work
how to check which IP enable for internet & which IP not allowed for internet?
Proxy/DNS Server Not Responding?
Jun 23, 2011I think I may be dealing with two separate issues here, but let me just tell you what's going on:When trying to connect to the internet through both a wireless router and my local area connection, my browsers give me error saying, "X is trying to connect using a proxy server that is not responding."When I troubleshoot either of these connections, it tells me the DNS server is not responding.My roommate's computer, also a brand-new Windows 7 laptop, is also unable to connect, as is my Android phone. My dad is also having a similar problem with his connections, though when he resets the modem it will resolve the problem for a day or two.I have tried:Rebooting computer, modem and wireless routerReconfiguring the wireless routerDefining the DNS address to OpenDNS addresses and Google DNS addressesReturning the DNS to be found automaticallyDisabling/enabling both internet connectionsReleasing and renewing my IP addressTalking directly with my ISP supportAnd countless other Googled remedies.I would think it was only a problem with the modem - however, when my computer is connected to a new wireless network somewhere else, it still returns the same proxy error
View 3 Replies View RelatedWindows Could Not Connect To Proxy Server?
Oct 15, 2011When I go on the internet I can go to any site but one. It says that windows could not connect to proxy server. I have tried everything I could think of. I added it to trusted sites, reset the proxy, tried several commands and haven't gotten anywhere. It won't pull up the particular site in IE or firefox, but it will pull it up on any other computer.
View 2 Replies View RelatedDisable A Proxy Server On Computer?
Nov 24, 2012my Pc NOT supporting to on any adult websites. & i wish to watch POrn movies on & off.
View 2 Replies View RelatedCannot Log Onto Firefox - Unable To Connect To Proxy Server
May 25, 2011I tried to log onto Firefox and it said something about not able to connect to the proxy server. I then tried to connect to IE, Opera, and safari and they didn't work. I configured my FF settings to let the network choose the server. But for some programs, like MW2 I cannot access Multiplayer, but I can access teamspeak.
View 9 Replies View RelatedInstall Free Proxy Server No DNS In Ipconfig?
Feb 20, 2013Trying to install FreeProxy server by Handmade. ipconfig has no DNS. Or could you recommend another program? When I install it tries to intstall MS Office 2010 is this correct.
View 1 Replies View RelatedSetting Up Windows 7 PC As PPTP VPN Proxy Server For Use With IPhone?
Nov 19, 2010I have found a temporary workaround by way of using Hotspot Shield's free VPN services, but I would like to create my own proxy server at home instead so I can avoid the constant timeouts/disconnects involved with the free service.So far I've set up my PC to use a static IP on the network, and forwarded port 1723 to that address. I've also enabled incoming connections under adapter settings, but it just seems like I'm missing something big here. I am unable to make a connection to my home PC from my iPhone over WAN, and even if I was able to I'm not sure how to enable internet connection sharing over that connection.
View 2 Replies View RelatedDoes PC Connect A Wifi Router Faster When A Proxy Server Is Configured
Jul 29, 2012does PC connect a wifi router faster when a proxy server is configured?
View 1 Replies View RelatedConnecting To DNS Server?
Jul 30, 2011I need to connect to a DNS Server over the internet. I have tried setting the DNS as the server IP but I really don't know what I'm doing when it comes to this. The server is running Server 2008.
View 1 Replies View RelatedPS3 Connecting To Media Server On PC
Apr 11, 2010I am trying to connect PS3 to Media Server. I have already established a wireless connection for PS3 updates etc...but cannot connect to Media Center. The system recognizes my home PC network, I am able to go to all the Playstation sites etc.. but I keep getting the following error message when trying to share files from the PC:"Access to the Media Server is not allowed, it is possible that the system name for this PS3 system,", has not been registered." Check the settings for the Media Server."I have seen such as thing as a Media Center Extender referred to for the XBox 360, but not the PS3. Is there one? Do I have to purchase something else? I am trying to use the PS3 to access my PC for Picture and Music files.
View 7 Replies View RelatedWindows 7 Not Connecting To Login Server?
Oct 15, 2011I have been trying to install a 3rd party download program. I download the install files, program runs, asks me for login info, I enter the login info and I get, can not connect to our login server error.I run the same program at work on windows xp and I have no problem. I ran another program on windows 7 and I get the same error, can not connect.I shut down all firewalls. I disabled vpn, not running - using main proxy.Used different modes in windows 7 - windows xp, windows vista. Nothing seems to work.Do I need to shut somthing off or turn somthing on? it seems that I cant connect to outside program servers (their login).
View 2 Replies View RelatedCopying Image From Web To MS Word - Connecting To Server?
Jun 11, 2011Whenever I paste a image from web into MS word, MS Words says connecting the server for information, please wait or press Esc to cancel, sometime the copying takes anywhere from 30 sec to 1 min or more. Whats the purpose of connecting the server.
View 3 Replies View RelatedOutlook 2010 Has Stopped Connecting To Exchange Server?
Apr 12, 2011I am using outlook 2010 and recently have started having problems connecting to my exchange server account. It has been running hunky dorry since I installed it a few months ago.Now it occasionally connects to the server but mostly shows "Disconnected" all my other email accounts run correctly. Its not the exchange server as my phone and web exchange connect OK, my laptop is running 2007 and it connects OK.
View 1 Replies View RelatedConnecting To A Password Protected Share On ReadyNas Server NV+?
Mar 28, 2011I recently upgraded from windows XP to 7. The problem is I can no longer connect to my shares on the server. Windows prompts me for a username and password and once I input this info, the same prompt shows up again.I have realised the domain it uses in the prompt (for username and password) is the same as the machine name and I have no field to input the domain manually.
View 5 Replies View RelatedWindows 7 Pro 'create' Access To Server
Sep 21, 2012I am a database programmer. I publish a client-server application. I have a client who is adding Win7 Pro workstations to their existing network, which at the present time consists of WinXP workstations talking to a Windows Server 2008 R2.The application needs to be able to create and destroy temporary files on the server. The XP workstations have no problem doing this, so the server permissions are set correctly. However, the Win7 workstation is unable to create the files as needed. The same user and folders are being used, so the only difference is the workstation OS.The folders are visible and can be accessed; the application runs, and can read and write existing files on the server, it just can't create/destroy files there.I am not able to recreate the problem here, but I do not have anywhere near as sophisticated a network so I can't truly reproduce their environment.
View 1 Replies View RelatedCreate A Windows Home Server With An In Use PC
Dec 1, 2012I have over that last few years been setting up a system of computers around my home, and now that the last one is in place (it was not planed in any way, however I have decided that I have enough computes scattered around) I want to set up a home server so that I can log onto the "same data" from any one of these computes, the problem is that only one of these computers is really fast enough and expandable enough (one is a desktop, all the others are laptops in clam-shell mode plugged into a monitor) to run a server. I have a lot of important data on the Hard drive, however I boot off a SSD, If in installed windows home server on that SSD could I still use that computer regularly?, that is as I normally would use that computer now with Windows 7 installed on it? also could I still access my Data on the HDD, and would is significantly slow down that computer in any way?
View 3 Replies View RelatedCan't Connect To Remote Linux Server To Create Network Share
Mar 28, 2011I have a hosted Linux server running CentOS 5 with Samba 3.4. Everything is setup and it is accessible via Linux machines by typing [URL] in a Firefox address bar. I am trying to set up a local network share on a Windows 7 Home Premium x64 SP1 computer. I have tried entering the IP address in 2 locations:1. Map Network drive. I select a drive letter and type in the ip \12.345.678.9 It asks for credentials and I enter the user info for the user I created on the Linux machine. It thinks a moment then pops back up asking for credentials. It doesn't say they are invalid, just never goes through.2. Connect to a website (under Map Network Drive). I type the IP [URL] and click connect and it pops up a dialog saying "The folder you entered does not appear to be valid. Please choose another".
I have tried creating a loopback adapter and trying to setup a connection via SSH using the guide found at [URL]. After completing the tutorial (substituting my server IP address for the destination address given) I try using the Run dialog as indicated and get a "Windows cannot connect to.." error and the diagnose connection button. One thing that may be causing problems there is that the loopback adapter is labeled as an unidentified network and thus stuck as a public connection, and I am unable to change it. Searching for solutions to that brings up things I can't access (no group policy editor on Home Premium) or results in no change (setting DHCP server, which I tried setting to my router).
Create A Batch File That Will Move Files Based On The File Type?
Oct 30, 2010How to create a batch file that will move files based on the file type?My Requirement : I need a batch file to copy all .doc files in all my HardDisk to aremovable disk say (Z: drive) . Can anyone make it possible using a batch file
View 4 Replies View RelatedConnecting Windows 7 To Windows Server 2003 Domain?
May 19, 2009I am testing some of our computers on our school system and got to the stage of joining it to our domain. They joined fine but the domain had never been connected to vista or windows 7 so it tried to upgrade itself. This crashed the server because it only had permission to change the sub domain.
View 9 Replies View RelatedHow To Change Domain In Windows 7 For Server
Sep 30, 2012I have a desktop which is connect win server 2003. How I can change the domainn of win 7 for server.
View 1 Replies View RelatedUnable To Change Internet Time Server
Aug 27, 2011Whenever I try to make a change in Internet Time Settings to the server and press either "OK" or "Update Now", I receive an error "Your changes could not be saved." I have searched for a fix but nothing I've tried has worked.
View 2 Replies View RelatedChange Boot Screen On Intel Server Boards?
Dec 15, 2012Does anybody know how to change the boot screen on an Intel S5520HCT serverboard?
View 1 Replies View RelatedConnecting Homegroups Windows 7 And Window Vista For File Sharing?
Oct 11, 2012have a new HP lap top running Win 7 64 bit, A new Lenovo Think Centre running Win 7 32 Bit, connected wirelessly to my router. Have set up a Homegroup between these two computers and they work OK, My problem, my older PC running Win Vista 64 bit is connected to the same Netcom NB6 plus 4w adsl2 router via a wired connection, this PC has files I would like to share with the new windows 7 computers. I have tried to follow the set up proceedures although they do not seem to work the way the Computers are connected to the router
View 2 Replies View RelatedWindows 7 Pro - "create" Access To Server?
Sep 21, 2012I am a database programmer. I publish a client-server application. I have a client who is adding Win7 Pro workstations to their existing network, which at the present time consists of WinXP workstations talking to a Windows server (not sure of version).he application needs to be able to create and destroy temporary files on the server. The XP workstations have no problem doing this, so the server permissions are set correctly. However, the Win7 workstation is unable to create the files as needed. The same user and folders are being used, so the only difference is the workstation OS.The folders are visible and can be accessed; the application runs, and can read and write existing files on the server, it just can't create/destroy files there
View 2 Replies View RelatedChange Or Establish Or Create User Name And Password
May 28, 2011Brother gave me his computer and removed all of his user data, when I try to log on to internet, being asked for user name and password. How to I either change or establish or create user name and password.
p.s. no start up disk, Hewlett Packard, with Windows 7.
File Transfer Errors From Windows To Mac Mini Server?
Nov 20, 2012Linksys E3200 Router
3 - Windows 7 Machines (Enterprise & Ultimate) , Tried wire and wireless
1 - Windows 8 64-bit machine
2 New Macbooks (Air and Pro)
1 Mac Mini server (2011 model) - 3TB external HD formatted in OS Journal (default mac) with samba sharing enabled
The macbook's we have connect and transfer large amounts of files just fine to the mac mini. No issues at all, even on wireless. The issue is when trying to transfer files from the Windows machines to the mac mini. You select just one 150mb file to copy over, and it might fail at 30mb or 120mb transferring giving an error like file or path is not available. However you can hit retry a few times and it might continue or restart, sometimes you have to cancel and copy the file over again. It acts like it loses the path, but you can instantly navigate to the server again instantly like there was never an issue. If you select a bunch files to transfer, lets just say like 2000 files, and its a total of 4gb. You will have to hope the retry works when the error happens or click skip and redo the file after. Nothing stands out that is causing this, but it is either an issue with the Mac & Samba transfer, router setting, or a Windows setting / registry issue causing it.I tried to search google, but most things that come up are how to setup sharing from mac to windows. Can't exactly find anyone else talking about this, except I did find 1 thread on Mac Rumors forums talking about it but it just had 2 people say they have the same issue, and 1 person said he had no issues.
Create A Txt File?
Jul 31, 2012I'm trying to send a .txt or an ASCII format file. I'm on Windows 7 and in the "save as" options there is no ASCII or .txt option.
View 5 Replies View RelatedWill Windows 7 Able To Create ISO File?
Feb 17, 2012I read somewhere recently that win 7 can create an iso file, just by sticking a cd and right click on the desktop and choose Burn. It suppose to have its own iso burner built in. I did just as that message said and nothing popped up. Now, it could be that it may be only on one of the win 7 versions, mine is the home premium one.
View 6 Replies View RelatedCant Create CON Folder/file?
Jul 13, 2011why cant we create CON folder/file ??? for what it refers to
View 6 Replies View RelatedCan Just Delete VHD File And Create A New One
Jul 17, 2011When I used VirtualBox and had system failures and/or viruses, I tried to save it with an antivirus. Sometimes it did not help so I had to delete it and create a new one.Well, I wan't to try the VHD booting on windows 7, but before I start I want to know what happens when my VHD file gets infected by malicious code.Can I just delete the VHD file and create a new one? as I would do with VBox?
View 2 Replies View Related