Reformat A Former Boot Drive?
Apr 14, 2011
I recently purchased a new laptop - Toshiba R835 P50x - and replaced the 640gb 5400rpm drive with a 120gb ssd(Kingston v100). I cloned the 640gb, 3 partition(2 hidden) drive to the SSD(all 3 paritions) and replaced it in the laptop and everything is working just fine I now have the original drive in a usb external enclosure and would like to use it for an external back-up drive.What the best(and easiest) method reformatting that drive to eliminate the hidden partitions, and give me just one?
View 4 Replies
ADVERTISEMENT
Apr 24, 2011
My Husbands Toshiba Satellite P300 running windows 7 professional, will not boot past the black Toshiba screen F2 and F12 do not work it is frozen on the black Toshiba screen so I cannot change the boot menu to reformat.Is there another way to load the windows 7 or my repair disk? My granddaughter tripped over the cord and the computer had a small fall onto carpet but fired up and worked perfectly well, The third time I restarted it froze.
View 7 Replies
View Related
Nov 28, 2009
Should i flash my bios to get rid of infection
how do i reformat the external hard drive
or what tools can i use.
View 2 Replies
View Related
May 8, 2011
how to reformat my drive c with existing Windows 7 and reinstall Windows 7 again?
View 5 Replies
View Related
Nov 25, 2012
My HP mini laptop has been distructed its program and the Swedish keyboard and word program turn up side down...I want to reboot or reformat so it will be in its normal program.
View 1 Replies
View Related
Feb 3, 2013
Dualbooting Ubuntu Lucid and W7 on a home-built box with a WD 500GB SATA HDD. Well, except today, no boot. Have connected the HDD to my spare box to retrieve the ext3 files from the Ubuntu partition, mostly some flac, mp3s, and pngs and jpgs, without success.
Firstly, how can I access those files? My spare box is also running Lucid. Seems that this would be easier, idk.
Secondly, should I attempt to repair? Or is a clean reinstall/reformat/repartition a better alternative?
View 4 Replies
View Related
Jul 14, 2011
So my desktop computer had a nasty virus or something on it, and it was originally a 32-bit Windows 7 Home Premium (as it came with the computer).To get rid of it, I decided to wipe the whole HDD and install a clean Windows 7 Ultimate. But I noticed that the boot time for computer now is MUCH slower now. Before on the Home Premium it would only hang at the "Welcome" screen for only about 5 seconds, then go straight to the desktop and I would be able to use it within minutes. Total boot time: probably under a minute.Now on Ultimate, it hangs on the "Welcome" screen for about 30 seconds, then takes another 10 seconds before I can do anything. Total boot time: 1.5 or 2 minutes.I've tried disabling some of the startup programs and ran a clean boot, but nothign wouthe boot time as fast as it was before. I know that Ultimate has a lot more features, does that explain the extra boot time?
View 1 Replies
View Related
Oct 25, 2012
I have a problem for a Mac formatted WD My Passport external drive. PC recognizes the WD Smartware part of the disk but not the data. I want to reformat the whole drive to Windows 7, but I can't see any options to do that.
View 1 Replies
View Related
Aug 23, 2012
I'm trying to do a clean reinstall, but I can't reformat the drive. I don't get very far, menu 'where do you want to install window', which is supposed to have a Format option, it doesn't!
View 7 Replies
View Related
Jan 3, 2013
RAID-1 DRIVE PULL OUT TO TRANSFER ...
I have a pair of mirrored RAID-1 drives (these have been removed and sitting as is for about 6months or so)
There is no important data on this that im concerned about preserving.
What i want to do is reformat them into 2 separate single storage HDD'safter installing them into my new system. or will it mess up my new system?
View 2 Replies
View Related
Nov 13, 2011
I have a hard drive I recovered from my old Dell laptop when the motherboard gave out. Originally, I just put it in an external hard case and have been using it as external storage. Now it is getting filled up, so I would like to reformat it to remove the OS partition (Vista) to give me access to the entire drive. I have removed and baked up all my files, but cannot find a way to repartition the drive to remove the OS volume. Disk manager will not let me access that volume to delete it - nor will diskpart. In fact, only the non-OS volume even shows up with a drive letter in diskpart.
I have searched the web but have only been able to find info on how to reformat the main hard drive...and this is definitely NOT what I want to do.
View 1 Replies
View Related
Jun 21, 2012
I've ordered new parts for a new computer and I read that I could transfer the license being used on this (current) computer to the new one because I have the full version of Windows not the OEM. I plan on (if possible) transfering my windows 7 license to the new computer/SSD and use this old hard drive for storage/backup. But I'm a little confused/unsure about a few things: 1. Do I install Windows 7 and activate it on the new computer/SSD first and then remove Windows 7 from the old hard drive? Or do I have to remove it from the old computer before attempting to install on the new one, 2. How do I remove Windows from the old drive? I haven't reformatted before but from what I've read from guides, I use the windows CD to reformat, but it reinstalls a clean version of Windows. How would I clean the old drive without reinstalling Windows?
View 1 Replies
View Related
Sep 16, 2012
Just recently i had to reformat my computer, i had some pretty personal documents where i placed in a password protected folder. I forgot exactly how i password protected it but to access the file i would click on a file called locker, and a black screen would open up, i would type in the password push enter and the file would appear, then to lock it i just open locker again and push "y".
I had to reformat my computer so copied all the contents that was inside the folder (and not the locker) onto a hard drive and reformmated my computer, however, now i cannot access these files. I can see them but they all say access denied due to permission rights.
I've followed all the security changes ive found and made myself the owner, set security settings to full control etc however, still cannot access these files. They are really important and was wondering if there was a way i can access them again or is there any programs that can unlock them? Ive tried all the programs similar to |unlocker"
View 1 Replies
View Related
Jul 10, 2012
I recently built my computer and installed a ssd and a hdd, the OS is on the ssd which is the c drive but since it is smaller than the hdd I tried to change the letters around and make the hdd the c drive using regedit because the default install location seems to be the c drive and after restarting the computer it boots up and says preparing your desktop then goes to a blue screen with just the cursor. I tried booting in safe mode and all I get there is a black screen also
View 9 Replies
View Related
Jan 25, 2012
Check my Hardware specs for full information
Current setup:
C: Boot, Corsair SSD
D: Files, samsung HDD
D:/boot files/user/(all user account directories moved here, when possible) I'm wondering if it's possible to install games such as Assasins' Creed or Skrym, but install all game data to this folder?D:/boot files/programs/* Many installers allow you to define a custom installation path, But I am unsure if these games would ask for one or force me to install to the default directory?
View 9 Replies
View Related
Sep 30, 2012
I have a 1T SATA system drive and a 1T SATA working drive. I installed a 3T SATA storage drive, and now my system won't boot from the C:. I have to go into the BIOS and boot from there, or use a boot disk. How do I get the system to boot from C: again?
View 3 Replies
View Related
Mar 23, 2012
I have a partition question and after scouring the Web, can't find anyone with the exact same situation as mine. Basically what I'm wondering is if I can delete a primary partition and then extend another, non primary into that space.
Here's what I have and why I want to do this: my laptop came from the factory with one 500GB SATA drive, split into two partitions (C, primary, and D, logical, each 250GB). The Win7 install was on the C drive. Recently, I installed a 120GB SSD as a second drive, and using the tools with it, copied the contents of my existing C partition to the new SSD, and then made the SSD the boot drive labeled as the C drive. So far so good, everything works fine.
Now, what I'm left with is this: C: 120GB (SSD, now the boot drive with the Win7 install) D: 250GB (SATA, the original D partition, Disk Management IDs it as a logical drive, extended partition) E: 250GB (SATA, the original C partition, Disk Management IDs it as a primary partition)
So, I have the original "C drive" on E now... it's no longer the system/boot drive. Obviously I don't need the files on it as they are all on the new SSD. What I want to do is to delete all those files and then combine what's on D and E into one 500GB D drive as I have no reason to have the two partitions. Is it possible to just delete the E partition and then extend the D partition into the unallocated space? I'm confused because it seems as though the D partition may rely on the E partition being there since the E drive IDs as primary. Or would the D partition become primary?
I know I could just back up the D partition to an external drive, delete both D and E partitions, and reformat as one new D and restore the files, but I don't want to create more work for myself if I don't have to. Obviously I don't want to mess up the files on the D drive though, which is why I'm asking.
View 6 Replies
View Related
Jan 10, 2013
How can I move programs and files from my ssd boot drive to my data drive (Windows 7 x64 PC)?
View 3 Replies
View Related
Apr 26, 2009
ok so im having a weird problem thats probably very easy to fix.
background info: before my Windows 7 install i had 3 partitions
vista 64
xp 32
empty (soon to be linux)
when i downloaded the newest win 7 build i deleted my xp 32 partition and installed Windows 7 on that partition. because Windows 7 creates that "reserve partition" or what ever, it extended my EMPTY partition with my vista partion. which cause it to become a "logical drive" rather than a "boot" drive. aka i cannot figure out how to access my vista OS.. rather annoying since im just toying with Windows 7 atm.
View 9 Replies
View Related
Jul 24, 2010
2 months ago, I installed windows 7 pro with no problems at all. Fast forward to today, I decided to reformat because the boot would get stuck in the middle of trying to boot into windows, it wouldn't flash the windows logo. I didn't think much of it so I just reformatted. This is where my real troubles began.So I reinstall windows 7 pro with no problems (the boot disk is in there the cd drive the entire time) I install my programs and what not and install my updates. All 100% Fine. Then I take out the boot disk and restart again... and I get this error message saying:
Nvidia Boot Agent 229.0525
Copyright 2001-2005 Nvidia Corp
Copyright 1997-2000 Intel Corp
Client Mac Address: 00 30 1B BC1F59 GUID: 12973077-FFFF-FFFF-FFFF-FFFFFFFFFFFF DCHP....
Then I press escape, then it says this:
PXE-EA0: Network Boot Canceled
PXE-M0F: Exiting Nvidia Boot Agent
DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER
So the first time I got this error, I just thought, Oh, something must have happened no big deal, so I reformatted again and again. But I kept on getting the same exact error. It'll load into windows just fine when my install disc is in the cd drive, but when I take it out, that error pops up. *My windows is authentic, each time I have been able to validate my copy.* I have tried installing from my hard drive and from the install disc with same error.*
This is my current set up:
Shuttle XPC SN27P2 (Barebone) Comes with motherboard, PSU, and case.
AMD Athlon 64 X2 5200+ @2.6GHz 65W
PNY XLR8 GTS 250
OCZ Reaper Memory 4GB PC-6400 DDR2-800
WD 74GB Raptor
WD 640GB Internal
WD 2.0TB Internal
WD 1.5TB External
WD 400GB External
Cavalry 1.0TB External
Shuttle 450 Watt PSU
Logitech G15 + MX518 + FuncPad 1030 Blk on Blk
Sony Optirac 18x DVD-/+RW drive
Dual Samsung SyncMaster 225BW 22" LCD Wide Screen Monitors
So how can I get windows to boot up with out having the boot disk in the cd drive...It worked the very first time I installed windows 7 on my PC...
View 6 Replies
View Related
Nov 26, 2009
For some odd reason, after doing some changes to my partitions in Windows 7 and restarting my computer, I got the ol' "BOOTMGR is missing" message. I have the Windows 7 Repair Disc image file and a 4GB USB Flash Drive, but, sadly, no CDs. Is there any way that I can put the image file onto my USB Flash Drive and boot from it with my Acer Aspire X1200 desktop computer?
View 1 Replies
View Related
Jan 21, 2012
How can i reformat my hp netbook.I don't know how
View 1 Replies
View Related
Jul 25, 2009
I deleted my existing OS then created two new partitions on the same drive. Then I installed Vista on one partition and that partition was properly named "c" as ususal. Then I started Windows 7 setup.exe from a different hard drive and let Windows 7 install itself into its own partition. When I got to "My Computer" the Windows 7 partition was labelled as "I" instead of the expected "C" which had never happend before when I did the same thing.
Does anyone know a save way to label the Win 7 drive as "C" while in Windows 7?
View 9 Replies
View Related
Aug 16, 2010
So my friend wants to reformat his computer because he is planning to return it to Costco. He has a HP netbook with windows start. I'm guessing that his computer comes with a program that lets him make a windows cd. But if there isn't, does anyone know another way to reformat his computer
View 18 Replies
View Related
Aug 11, 2012
I want to completely wipe my laptop as I am selling it, so naturally dont want a trace of myself or existing progs on it, It was suggested to me that the W7 installation disc would give me the option but it does not seem to, so can some walk me through how to wipe the laptop compeltely?
View 3 Replies
View Related
Jul 5, 2010
Windows 7 keeps crashing for me and I'm wanting to completely reformat my C: but I take it it's more or less the same as what I did to install Windows 7. Ie, boot up the install disk when I switch my laptop on and then just following the instructions again?
View 4 Replies
View Related
Dec 7, 2012
Just recently, I created a system repair disc with a 4.7 gigabyte DVD-R disc. After the disc was formatted, it's capacity was reduced to 146 megabytes.How do I get the disc's capacity back to normal? I don't want to waste 4.68 gigabytes just for a repair disc.If anyone knows how to get my disc's space back, please tell me. I'll learn from my mistake and use smaller discs first before using gigantic ones.
View 2 Replies
View Related
Aug 30, 2010
Reformat Windows 7 without CD?
View 3 Replies
View Related
Dec 28, 2009
I have a windows 7 CD I made from the computer. My computer now keeps crashing. I can't start the computer normally or in safe mode. It shows me the blue screen. So if I insert the CD, it says press any key to boot from the CD. then it goes to startup repair where it can't repair anything. It doesn't reinstall Windows 7. and I can't even restore to the factory conditions. this Laptop was Vista basic when bought.
View 5 Replies
View Related
Mar 18, 2011
I already have windows 7 x64 edition installed on this computer. I'm trying to do a full reformat and delete everything and start fresh. When the computer starts, I hit F12 and try to boot from the disc. All it does is just go straight to the login screen and I'm back where I was before...with the old operating system.Tried switching the BIOS to boot from disc...nothing is working? It's just an endless loop I'm getting.Restart->F12->Boot from CD-> just continues to login screen.is there something different with windows 7? How to I reformat this thing?
View 1 Replies
View Related
Jan 21, 2012
how to reformat my hp netbook i don't know how
View 1 Replies
View Related