No Boot: Attempt To Repair, Or Retrieve Data/reformat?
Feb 3, 2013
Dualbooting Ubuntu Lucid and W7 on a home-built box with a WD 500GB SATA HDD. Well, except today, no boot. Have connected the HDD to my spare box to retrieve the ext3 files from the Ubuntu partition, mostly some flac, mp3s, and pngs and jpgs, without success.
Firstly, how can I access those files? My spare box is also running Lucid. Seems that this would be easier, idk.
Secondly, should I attempt to repair? Or is a clean reinstall/reformat/repartition a better alternative?
My CD/DVD-Rom drive is unresponsive (it opens and closes normally) and does not show up on Device Manager.I read a guide that suggested that I have corrupted registry entries. It told me to delete UpperFilters and LowerFilters.I deleted the two entries (and possibly others in the same location).
Good news: I backed up my registry Bad news: I backed up my ENTIRE registry (oops)
So far, everything appears to be the same... Except when I open iTunes I get an notice that says the registry settings needed to burn and import CDs are missing.I've been told that I can import the entire .reg backup and "hope that all goes well". It sounds rather sketchy and I am seeking better help.I've also been told that a wire could have come loose but I want to fix this registry problem before opening up my PC. I hope it doesn't come off as leaching by coming here solely for making a help thread.
I have a Lenovo z360 laptop that runs Windows 7 Home Premium x86 on an Intel core i3 processor. When I turned it on last Friday, the Windows logo showed for around 5 minutes then the BSOD flashes. Technical information:UNMOUNTABLE_BOOT_VOLUME 0x000000ED (0x87E0D798, 0xC0000183). I put in a repair disk and chose to use cmd so that I can chkdsk /r C:. After it successfully checked, I decided to also chkdsk D: so I wouldn't need to go past the recovery options menu again. It took around 5 hours before my maid unplugged it while cleaning, so it died while I was eating. I charged it somewhere else when my brother discharged it to use the desktop computer. He said that it said "Deleting index entry from index $0 of ... 25" when it died again. When I booted it again, it still shows the windows logo for 5 minutes but restarts with no blue screen
My relatively new Dell desktop power supply died so trying to retrieve my data (pictures and docs) off the internal hard drive. Hooked it up with an adapter I have used in the past which seems to work fine and I can see the drive when I look on windows explorer on my laptop. The only problem is the Windows 7 operating system is preventing me from access the data stating I don�t have security access or right to copy the data.
I had a perfectly working 250GB SATA HDD that I tried to clone to a 1 TB SATA HDD. I used EASEUS's free disk copy software. The clone said it would tas the one being cloned and not written to. The cloned drive had the data on it, but it was just corrupted because the clone never finished. I tried to get into recovery console from the Windows 7 CD, and it kept sayike about an hour and 20 minutes, and I read that it would be quicker, as all the free space would not need to clone over sector by sector. I aborted so that I could use different software that would quick clone. Anyway, afterwards, neither HDD would boot. The source drive should boot, as all it wang it was the wrong version. Basically the program screwed up both my hard drives.
Finally, I was able to get into a UEFI recovery console that allowed me to see that the cloning program somehow changed my partitions into GPT. The source hard drive is all intact, and I'm pretty sure the only thing that is screwed up is the partition types and perhaps the boot record. Is there a way I can edit the partitions to make them back to normal and bootable again?
I have Asus laptop with OEM Windows 7 HomeP 64bit on it, I installed Ubuntu 12.04 along side with Windows 7, didn't know that Ubuntu will be the main boot, I used Ubuntu 11.10 a year a go and Windows was my main boot, I tired several way to retrieve Windows 7 as main boot but didn't work.I tried to fully recover Windows, but when finished I get black screen with "getgrub error" now recovery doesn't work any more.I want to get rid of Ubuntu for ever, how? without losing my genuine Windows 7
I recently purchased a new laptop - Toshiba R835 P50x - and replaced the 640gb 5400rpm drive with a 120gb ssd(Kingston v100). I cloned the 640gb, 3 partition(2 hidden) drive to the SSD(all 3 paritions) and replaced it in the laptop and everything is working just fine I now have the original drive in a usb external enclosure and would like to use it for an external back-up drive.What the best(and easiest) method reformatting that drive to eliminate the hidden partitions, and give me just one?
My Husbands Toshiba Satellite P300 running windows 7 professional, will not boot past the black Toshiba screen F2 and F12 do not work it is frozen on the black Toshiba screen so I cannot change the boot menu to reformat.Is there another way to load the windows 7 or my repair disk? My granddaughter tripped over the cord and the computer had a small fall onto carpet but fired up and worked perfectly well, The third time I restarted it froze.
So I've been using my 64GB ssd as my windows 7 boot drive and i have a 1TB hdd as my data drive. Recently the my computer has begun to freeze up with errors like "explorer.exe" has stopped responding or "windows" has stopped responding and half of the time when i try to boot it says it cant find windows. This has lead me to believe that my ssd is dying despite being only a year old. I need to RMA my ssd but to do that i would be losing my boot drive for weeks. So I thought id try to create a system image so that i can simply put my boot drive on my hdd, but when i try to create the image it says that the image would be 711GB because its including all of my hdd (which contains all my user libraries and downloads). My question is: how do I make windows stop thinking that my hdd is a system drive so that I can create a reasonably sized image, or more generally: how can i easily move my boot drive to my hdd? Also, I've read some posts about using "easyBCD" to accomplish the latter but I'm not sure that's exactly what i need in this situation.
So my desktop computer had a nasty virus or something on it, and it was originally a 32-bit Windows 7 Home Premium (as it came with the computer).To get rid of it, I decided to wipe the whole HDD and install a clean Windows 7 Ultimate. But I noticed that the boot time for computer now is MUCH slower now. Before on the Home Premium it would only hang at the "Welcome" screen for only about 5 seconds, then go straight to the desktop and I would be able to use it within minutes. Total boot time: probably under a minute.Now on Ultimate, it hangs on the "Welcome" screen for about 30 seconds, then takes another 10 seconds before I can do anything. Total boot time: 1.5 or 2 minutes.I've tried disabling some of the startup programs and ran a clean boot, but nothign wouthe boot time as fast as it was before. I know that Ultimate has a lot more features, does that explain the extra boot time?
I have a Toshiba Satellite C655-S5132 that just shut down & now will not boot Windows 7. Just goes to black screen w/blinking cursor then goes to 'startup repair' (which I'm postiive this is a virus of somekind) & will not allow me to do anything. Just repeats itself. I downloaded Windows 7 repair to a CD-R, chgd BIOS settings to CD/DVD to boot first, saved changes, and will NOT pull/boot up from disc. I've tried 2diff repair discs, both do not work. 'F8' does not do anything for me, not able to get to 'safe mode'. Computer is only 2yrs old.
my laptop is stuck on the screen attempt to resume again & i can't get off of it. it won't let me move throughout both options. not sure where to start with this one.
Hardware Information (This is from memory and may not be completely accurate):The computer model is emachines The processor is a dual core Intel Pentium The graphics card is NVIDIA (Can't remember the model.)4GB of RAM installed Software Information (Also from memory, but this is likely to be more accurate than the hardware.): Windows 7 Home Premium 64bit Antivirus software is Comodo Internet Security - Also the firewall (product information).I often used Advanced System Care for optimization.-product information.after searching the internet for ways to fix my problem for the past three days, I'm at a complete loss. I was told by a professional that my registry was likely corrupted and that my best bet would be to re-install Windows entirely. I was hoping it wouldn't come to that, but was prepared nonetheless.So I inserted the installation disk, and wouldn't you know it, the installer wouldn't recognize my hard drive (BIOS recognizes it though). Searching for reasons why this was happening only turned up people saying to make sure it was recognized by BIOS, which I considered a no brainier. When it still didn't work for people in certain threads, they were told to try wiping their hard drives. I've done it. Windows still doesn't want to notice my hard drive.After that, I decided to try and install Windows to an external hard drive. I know this isn't how Windows was designed, and I knew it wasn't how Windows was meant to be used, but I was (to my knowledge) out of other options (Also, the external hard drive has 1 TB of space on it, so I wasn't concerned about speed loss). So, I searched for ways to do that, and I came across PWboot. The first half of the installation worked, the second half did not. I began getting an error that read (bootmgr is missing press ctrlalt+delete to reboot.) Which I did. But that didn't fix anything. So I tried the entire process again, and it didn't work.The "Repair your computer" feature in the windows install disk turned up nothing as well. I can't "Factory Reset" because it can't detect any installation of windows, the startup repair function can't "repair this computer automatically", and none of the other options will even open (with the exception of the command prompt, but most of the commands aren't valid for some reason.)
Left my computer on overnight, came in this morning and rebooted from sleep mode and it started to load then I got a black screen with the message "the last attempt to resume from its last location failed - attempt to resume again? The message continues - "continue with system resume" or the other option is to "delete restoration data and proceed to system boot menu" - this is highlighted but the enter key or arrow will not activate. I have the original Windows 7 ultimate disc but it will not boot it up, also cannot access safe mode with f8. I have an accounting package for my business on this computer and cannot lose it.
My bluetooth folder was open with mobile phone paired with PC. Windows explorer sometimes shows up yellow bar for extra advice or information. this time, the bluetooth (mobile) folder had required permission to "get content from internet" or something like that I didn't read good and rushly pressed YES button to automatically do this option. by accident. (is not virus, no virus found at all with germany top antivirus software) I tried to find this setting elsewhere but it seems nothing has changed. Must be some hidden setting. very difficult to find.
Just the other day, I bought a Samsung 830 SSD and tried to install it yesterday. There were several problems, including the SSD not showing up in disk management and Windows Explorer, but showing up in device manager, and showing up in the BIOS. The biggest problem, however, was learning that my motherboard could not do SATA 6 without halving my PCI-E x16 lane. Anyway, I decided to hold off on the SSD until my next build and I'm sending it back.
The issue now is that I cannot put my computer to sleep. When I do, it resumes within a second or so. I tried unplugging every device from it, including my Ethernet cable and all USB devices, and it still persists. I also changed power management to disallow my network card from waking my computer, and changed the suspend mode of my USB controller to disallow them to wake the computer as well.
While installing the SSD, I recall changing the SATA 6 Marvell controller from IDE to AHCI (two SATA 6 ports are controlled by Marvell (into which I plugged my SSD) and the others by JMicron). As of writing, the Marvell controller is back to IDE and has nothing plugged into it. I also installed a few SATA controller drivers while attempting to get SATA 6 speeds and trying to figure out why my SSD was not showing up in disk management (I could not even format it via a right-click and it had no drive letter).
My suspend mode is set to "Auto" in BIOS, same as it's always been. Perhaps this has nothing to do with my failed installation of the SSD. But it only began after I tried to install it.
My external hard disk has been acting up i.e it would take time to load some documents. So I decided to perform the Check disk options. This has been going on for the last 3 days and am thinking of cancelling the process because it seems to be stuck and it is not even 20% done. What will be the consequences of cancelling it?
After a successful installation of Windows 7, I have the following irritating problem: Some data needs to be entered after each boot or even more frequently.
For instance, the username/password for the "Dial-UP/VPN" Internet connection is not kept across boots. The setting of the desktop is not kept (e.g., the size of desktop icons).
This seems to be a system-wide permissions' problem to write to a certain directory (e.g., a directory where the system keeps the data is read only).
Can you suggest in which directory/file Windows 7 keeps desktop settings and login credentials - so I could check this directory/file permissions ?
I am having a new rig put together and ideally I want the following set up: Win 7, 64 bit on an SSD drive, along with all my software (MS Office, Adobe CS3 etc etc). I'd want to put all my data files on a separate hard drive. Is this possible? I keep hearing conflicting advice that windows registry doesn't like it and some software won't even install on an SSD. Is there anyone who can throw light on this?
Recently my laptop which is an Asus N53S, is not been able to boot windows 7. When I try and do a start up repair, it is unable to repair. Then, I also made a windows 7 system repair disc, it ran fine but it was unable to fix my problem as well. I tried to hook up a printer to my laptop but did not succeed cause I had no internet or driver discs to install at the time. Also, I install a program called desa? for downloading blackmesa source.
I have an Alienware M18X.The problems I'm having is when I start the laptop up I am prompt to run a recovery. Of course I do, but it brings up a "Loading Items" bar. I am not sure if this is normal, next screen that comes up is the blue wallpaper. At this point, all I see is the wallpaper, and the curser. Please make a note that there is nothing else on this screen and I let it sit on that screen for about 15 minutes. This happens with both Normally booting and the recovery option. I cannot seem to find the Safe Boot option anymore. I have both Unbuntu and Windows 7 Home Premium 64bit installed on this laptop.
now when I switch on the pc, after the white screen and before the boot appear a black screen that say verifying dmi pool data and it stop to this.
For the first time I change the boot priority and boot from the another hard disk and it start. But now when I Boot from any hard disk the message is always the same...
I can boot without any problem from dvd drive or another device. Any solution?
I'm making a back-up DVD for Windows 7 installation. Do I choose Create data DVD or Boot DVD? What's the difference, since they will hold the same files.
I've installed Windows 7 alongside Ubuntu and was using grub2 bootloader, after changing my graphics card and moving removing some old hard disks when I try to boot the Windows partition I get the blinking underscore screen indefinitely.I tried recovery from the DVD, the Windows install is not recognised in the list, it's just empty, clicking load drivers I can navigate to the drive - it's there as D:, I can see the Windows directory and files, the C drive is another NTFS partition without a Windows install. As it doesn't recognise the install, startup recovery doesn't work.I then tried bootrec and bcdedit from the command line, eventually I hit a wall with an error that there is no recognised file system - despite it being available in the Load Drivers dialog earlier.
