Machine Won't Repair Nor Normally Boot

Mar 5, 2012

I have an Alienware M18X.The problems I'm having is when I start the laptop up I am prompt to run a recovery. Of course I do, but it brings up a "Loading Items" bar. I am not sure if this is normal, next screen that comes up is the blue wallpaper. At this point, all I see is the wallpaper, and the curser. Please make a note that there is nothing else on this screen and I let it sit on that screen for about 15 minutes. This happens with both Normally booting and the recovery option. I cannot seem to find the Safe Boot option anymore. I have both Unbuntu and Windows 7 Home Premium 64bit installed on this laptop.

View 1 Replies


ADVERTISEMENT

Machine Will Only Start After Startup Repair When Shut Down

Jan 4, 2013

If I shut down my machine it can only start after a startup repair. However, if I hibernate it starts normally. What this means therefore is that I am no longer able to install new updates successfully especially those that require a shut down for a complete successful installation. What should I do?

View 1 Replies View Related

Windows 7 Startup Repair On Every Boot But After Startup Repair Hibernate Works?

Dec 14, 2012

windows 7 startup repair on every boot but after startup repair hibernate works. How to fix?

View 1 Replies View Related

Windows 7 Nor Windows 7 Repair Disc Will Not Boot, Keep Getting 'startup Repair'

Feb 3, 2012

I have a Toshiba Satellite C655-S5132 that just shut down & now will not boot Windows 7. Just goes to black screen w/blinking cursor then goes to 'startup repair' (which I'm postiive this is a virus of somekind) & will not allow me to do anything. Just repeats itself. I downloaded Windows 7 repair to a CD-R, chgd BIOS settings to CD/DVD to boot first, saved changes, and will NOT pull/boot up from disc. I've tried 2diff repair discs, both do not work. 'F8' does not do anything for me, not able to get to 'safe mode'. Computer is only 2yrs old.

View 9 Replies View Related

BSOD Almost Every Time Boot Machine

Jan 23, 2012

I usually have to boot my machine twice. I boot the first time, log into my (domain) account, and once windows loads, I get a BSOD. After that, if I reboot, the system works all day.

This happens if I'm bringing it out of sleep or hibernate too, but it has to be inactive for a few hours for it to give a BSOD.

I am running a Dell Latitude D620.
Windows 7 Pro 32 bit (fully licensed)
4 GB RAM
Intel T2500 2.00 GHz processor
Joined to a domain

Attached is the BSOD reports requested.

View 9 Replies View Related

Cloning Dual Boot Machine?

Sep 14, 2010

1. I have a FUJITSU MHZ2160BH G2 2.5 ATA Hard Drive which is an moving parts hard drive. Id like to replace this with a Solid State much large hard drive. Are all 2.5 Hard Drives the same in terms of the generic size? I.e. do I simply just screw the back of the laptop, take out the old and put in the new?

2. I have a three partitions that I would like to clone. I have a dual boot, Windows 7 and Ubuntu laptop with shared hosting. Is Clonezilla the best for this do you think? Its a little complicated in that Id like to copy the existing hard drive and then in the new hard drive increase the partitions by 15 gig each - and then copy the 3 partitions in.

View 1 Replies View Related

Can Limux Can Be Used As Dual Boot Machine

Nov 23, 2011

do u use Linux and Windos dual boot machine?

View 6 Replies View Related

How To Uninstall An OS On A Dual Boot Machine ?

Dec 28, 2009

Ok, so I've read the tutorial on how to dual boot Windows 7 with XP (Dual Boot Installation with Windows 7 and XP)

I have Windows 7 64bit currently installed and need to dual boot with XP 32b. My question is, once I have successfully dual-booted my machine (and did what I need to do), how do I completely uninstall XP? Can I merge the two partitions back into one primary without affecting my Windows 7? I basically want my machine back the way it was before I dual-booted XP (without formatting and starting over). This possible?

View 2 Replies View Related

Boot External HDD As Virtual Machine?

Mar 21, 2011

I have a HDD that has Windows 7 installed on it. I want to connect this drive to another machine, and boot it as a virtual machine. (i.e. boot the OS on the drive in another OS on machine #2).

View 8 Replies View Related

Dual Boot On An Existing XP Machine

Oct 14, 2012

I have a Win. XP machine. The Blackmagic hardware that I am installing wants to be in a Win. 7 64 bit machine.Can I make this a dual boot machine?

View 5 Replies View Related

Windows 7 Won't Boot (Can't Even Boot Startup Repair)

Aug 8, 2012

Hardware Information (This is from memory and may not be completely accurate):The computer model is emachines The processor is a dual core Intel Pentium The graphics card is NVIDIA (Can't remember the model.)4GB of RAM installed Software Information (Also from memory, but this is likely to be more accurate than the hardware.): Windows 7 Home Premium 64bit Antivirus software is Comodo Internet Security - Also the firewall (product information).I often used Advanced System Care for optimization.-product information.after searching the internet for ways to fix my problem for the past three days, I'm at a complete loss. I was told by a professional that my registry was likely corrupted and that my best bet would be to re-install Windows entirely. I was hoping it wouldn't come to that, but was prepared nonetheless.So I inserted the installation disk, and wouldn't you know it, the installer wouldn't recognize my hard drive (BIOS recognizes it though). Searching for reasons why this was happening only turned up people saying to make sure it was recognized by BIOS, which I considered a no brainier. When it still didn't work for people in certain threads, they were told to try wiping their hard drives. I've done it. Windows still doesn't want to notice my hard drive.After that, I decided to try and install Windows to an external hard drive. I know this isn't how Windows was designed, and I knew it wasn't how Windows was meant to be used, but I was (to my knowledge) out of other options (Also, the external hard drive has 1 TB of space on it, so I wasn't concerned about speed loss). So, I searched for ways to do that, and I came across PWboot. The first half of the installation worked, the second half did not. I began getting an error that read (bootmgr is missing press ctrlalt+delete to reboot.) Which I did. But that didn't fix anything. So I tried the entire process again, and it didn't work.The "Repair your computer" feature in the windows install disk turned up nothing as well. I can't "Factory Reset" because it can't detect any installation of windows, the startup repair function can't "repair this computer automatically", and none of the other options will even open (with the exception of the command prompt, but most of the commands aren't valid for some reason.)

View 9 Replies View Related

Fail To Boot In Windows 7 (repair Or Any Boot)

Sep 9, 2012

Over last week i had problem in my Windows7 to boot I get Over than 20minute to boot (Repair/Formate Or normal boot or in CD)despite my config :

Os : Windows Xp
CPU : Core2Duo e4600
Gpu : Nvidia Ge Force 9500GT
Ram : 2go

View 9 Replies View Related

How To Make Windows 7 Machine Boot Up Quickly

Apr 27, 2012

I have read many articles on how to make your computer boot quickly. I have tried several, but after a month or so they become very slow again. I have four laptops and three PCs in my home. While they are from different manufacturers, they are all no more then a year old and running Windows 7 Home Premium. With my Internet service I have Norton installed. My newest computer can take up to 2 full minutes, while one of the laptops can be as quick as 45-50 seconds. Specifically what is the magic formula or method of how I can get all my systems to boot up quickly and continue to do so in future?

View 29 Replies View Related

Windows 7 64 Bit Machine Stuck In Boot Loop

May 24, 2011

I have a windows 7 pro 64 bit HP desktop computer that will not load windows. I have tried safemode, safemode w/ networking, and last know good config. I've run startup repair both from windowsRE and an original windows 7 pro disk. I have attempted multiple system restores (non destructive) to a number of different dates. The system restores say that they work but the machine still loops.

I know it's just some small windows corruption. I would have no trouble backing up my files with a linux distribution live flash drive and restoring the OS but I REALLY don't want to do that. How can I identify and repair the problem without starting from scratch. I'm familiar with msdos cli, but don't know which commands (if any) will help. I also don't know of any live CD's/ tools that will allow me to fix this problem. My problem here is simply lack of information.

View 11 Replies View Related

Windows 7 Machine Slow To Boot, Won't Keep Fonts Installed

Nov 17, 2011

A couple of months ago I was working on a logo design in Adobe Illustrator CS5 (I'm a graphic designer) when the power in my town cut out for a moment. It shut the computer down, and since then I noticed that it takes quite a long time for the machine to boot up... 5 or more minutes.

Also since then, every time I buy and install a new font it does not keep the font installed. I have to continuously reinstall them. Anything installed prior to that day is fine, but new fonts since then just won't stay put.

I'm using a Dell Studio XPS with Windows 7 Pro.

View 2 Replies View Related

How To Get Correct Username In Windows 7 Logon On Boot Up Of Machine

Jan 19, 2012

Windows 7 on Novell Network. On boot up the Novell Logon screen comes up first and Username is correct and then Password is entered. The next screen is the Windows 7 Logon. The username is incorrect and no password is used. The correct username must be typed in.How do I get the correct username in the Windows 7 Logon on boot up of machine? On my XP machines the NWGINA.dll handles this procedure. What handles the boot up in Windows 7 and how do you put in the defaults?

View 2 Replies View Related

Windows 7 Toshiba Machine Taking 20 Minutes To Boot?

Feb 17, 2012

I have a friend who just picked up a brand new Toshiba laptop from Best Buy. It worked great the first two days, then suddenly slowed down to the point that it takes almost a half hour to boot. At first I thought it may be software issues so I wiped the entire computer and installed a new copy of Windows 7 from the recovery disk. This fixed nothing.Since then I have tried disabling the startup processes with msconfig Running GREP to see if he had a rootkit already.Running Avast, Malwarebytes, etc.Running Ultimate Boot CD to use their CPU, HD and Memory diagnostic tools.All of which have turned up no errors, no viruses no problems.what else could be causing such a massive delay?I plan on having him return this laptop and getting another one anyway, but Its not often I cant fix a PC I am given.

View 1 Replies View Related

Flashing Splash Screen - Windows 7 Machine Won't Boot

Nov 19, 2012

When I get to the splash screen it just blinks. It won't boot. I've tried going into the safe mode by pressing F8 at the previous screen. I've tried booting from a start disk. It won't go into the advanced boot options, and booting from a disk made no difference. This has happened before but I was able to get in through safe mode. Once I get in I can do a system restore and it will work for a while. How can I get in to my machine?

View 3 Replies View Related

Physical To Virtual Machine & Share Boot Drive?

May 31, 2012

XP: Physical to Virtual & Share Drive w Host? Disk2VHD vs VMWare P2V? Physical-to-Virtual - Wikipedia, the free encyclopedia My Thinkpad X61T with recent 8GB DDR2 Upgrade:I have an XP Pro 3 instance on a HDD able to use 2.99 GB RAM. I can backup bunch of data files to make size smaller.I have a Win 7 x64 instance on another HDD that can use most of the 8GB RAM. Now, I'd like to do two things:

1. Virtualize the XP instance and create a Virtual Disk/ Virtual Machine, with all of the Programs & Settings intact.

2. Run this XP on top of Win 7 x64 Host and "Slowly" Migrate Files/ Settings/ MetaData etc. from GUEST XP to HOST machine.I'd prefer to be able to SHARE "the C: or Boot Drive" between the GUEST & HOST machines (as it is mounted/ running) and be able to COPY some Specific Files/Folders using ROBOCOPY/ RICHCOPY to maintain attributes that could/ easily get lost with any other copy method.Thoughts/ suggestions, experiences, comparative reviews on using Software/ Tools out of the above listed page and how could go about doing both the things.do let me know UPDATE: Some advise/ suggestions I got on another forum was. Quote: If it were me, I'd use DISK2VHD on the XP hard drive, copy it to the Windows 7 machine, install XP Mode, and fire it up like that.An alternative, in some ways better, would be to use VMWare's P2V converter on the XP machine, install VMWare Player on the 7 machine, and load the virtual machine on there.If you're just worried about docs / settings / etc, I'd suggest skipping virtualization and just use Windows Easy Transfer to make a clean break. I've used VMWare and Virtual PC a LOT in the past, but not used in a long time. I know some functionality for items 1 & 2 exist but wanted to get a comparative idea between the various options LISTED in the Link. I guess I was a little out of touch when I realized so many products existed just to do P to V. I remember only VMWare had that for a while.For me the ability to "share" & "copy" these files is critical. PS: Also, I may or may not have enough storage on the Win 7 x64 drive so I'll have to run the guest VM from a USB 2.0 HDD. Would that work okay? For now, if the suggestion give by someone from the other forum still holds. What are the pros vs cons of Disk2VHD vs VMWare? (Given the specifics of my scenario?)Esp Sharing Drive & Copying using RoboCopy/ Richcopy (To maintain Modified/ Created Dates .. Wish there was way to keep Accessed Date)

View 1 Replies View Related

Upgrading To Windows 32bit - Machine Does Not Boot Back Up

Nov 23, 2011

I am trying to upgrade windows vista ultimate 32 bit to windows 7 ultimate 32 bit on a computer i built. I've tried custom installation and the recommended installation, but the same problem arises. The problem is, whenever the computer goes to restart, it does not boot back up. So, during the installation, it starts to restart, but does not boot back up, but the machine is still running.

View 5 Replies View Related

Operating System Crashing On Boot Up - Newly Built Machine

Feb 23, 2012

Last night, I built my first desktop machine. Most of my components were brand new, but I kept my old hard drive.(Which contained my Windows Home Premium 64 bit OS on it.)

When I finally went to power it up for the first time, it booted up normally, and then when it goes to the black screen with the colors swirling together to make the windows logo, right away it quickly flashed to a blue screen and then restarted.

I then went into the repair windows mode, but the automatic repairs failed. They left me with these details:

Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
Problem Signature 03: unknown
Problem Signature 04: 21200924
Problem Signature 05: Autofailover
Problem Signature 06: 3
Problem Signature 07: No Root Cause
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

The hard drive with the operating sytem was working fine for me yesterday in my old machine. So I am assuming it has to be a problem with the new hardware, or I failed to connect something, or i need to change a setting.

View 4 Replies View Related

Unable To Boot Off Safe Mode And Machine Shuts Down Abruptly

Jul 9, 2012

I own a gateway notebook as my secondary machine but since I sold my workhorse it should be my main machine this week before I buy a couple new macs and transfer this buddy to my mom, as of this morning I tried to wipe off the ATI HD3200 driver and update it as the scaling options were not showing up but after I got the old driver off I tried rebooting the system and started to have problems, now I can only boot in safe mode and it shuts down abruptly after some time (does not come back up if I don't press the power button), I used driver sweeper to get rid of the old driver.

View 6 Replies View Related

Windows 7 Machine Cannot Access Win2003 Machine In A Workgroup?

Jan 4, 2012

i have Lan, all computers are windows 7 proffisional and one machine is windows 2003 , workgroup . i made shared folder in windows2003 , some computers can access the shared folder and others can not.when i open network , i see the 2003 computer, when i try to access it , it asked for user name and password. the user is administrator for all , when i enter the user and password from many computers in the lan it is work correctly but in one machine with the same settings its says , you have no permession to access this computer.

View 3 Replies View Related

Transfer Windows 7 From DE-commissioned Machine To Another Machine

Sep 22, 2010

I have de-commissioned an older machine that I had installed W7 on, I wish to install the W7 from this machine to another, is this possible -if so how?I think I have read somewhere, that once W7 is installed on a machine - it can NEVER be used on any other machine, is this correct?

View 1 Replies View Related

XP Machine Can See Machine But Can't Access Shared Folders

Jul 31, 2009

I have Windows Seven 7600 and i'm trying to share files with a XP SP2 machine!

Problems:

-XP machine can see Seven machine but can't access shared folders!

-Seven machine can see XP machine but when i'm trying to see shared folders it gives me an error(see on screenshot)

-Network map doesn't work(see screenshot)

-Both machines have same workgroup MSHOME but when i go to homegroup it says there is no people in the homegroup!(see on screenshots)

Other info:

Before i couldn't turn network discovery on,every time i was set it to on he was going to off so I searched on this forum(great forum) and finally i was able to turn it on,maybe others have this problem so there what i did:i go to start=>run=>services.msc and i turned on(also i switched them to automatic startup) these services DNS Client, Function Discovery Resource Publication, SSDP Discovery, and UPnP Device Host services.

IPv6 currently is enabled!

View 9 Replies View Related

Windows 7 HP X64 Won't Boot Or Repair

Sep 19, 2012

Recently my laptop which is an Asus N53S, is not been able to boot windows 7. When I try and do a start up repair, it is unable to repair. Then, I also made a windows 7 system repair disc, it ran fine but it was unable to fix my problem as well. I tried to hook up a printer to my laptop but did not succeed cause I had no internet or driver discs to install at the time. Also, I install a program called desa? for downloading blackmesa source.

View 5 Replies View Related

Windows 7 Unable To Boot Or Repair?

Aug 3, 2011

I've installed Windows 7 alongside Ubuntu and was using grub2 bootloader, after changing my graphics card and moving removing some old hard disks when I try to boot the Windows partition I get the blinking underscore screen indefinitely.I tried recovery from the DVD, the Windows install is not recognised in the list, it's just empty, clicking load drivers I can navigate to the drive - it's there as D:, I can see the Windows directory and files, the C drive is another NTFS partition without a Windows install. As it doesn't recognise the install, startup recovery doesn't work.I then tried bootrec and bcdedit from the command line, eventually I hit a wall with an error that there is no recognised file system - despite it being available in the Load Drivers dialog earlier.

View 2 Replies View Related

Computer Going Into Startup Repair On Boot?

Apr 17, 2012

On boot it is taking him to the windows 7 startup repair which fails with StartUpRepairOflline AutoFailover CorruptFile

I have suggested the following, all which have failed to make a difference:

bootrec.exe with /fixmbr /fixboot and /RebuildBcd
Run chkdsk
Startup repair
System Restore - two dates tried

The pc is about a month or so old, and I'm thinking it could be a hardware issue, hard drive?

Two things I am going to try when I get there is a WD Diagnostics on the Hard drive, and the sfc

View 7 Replies View Related

Can't Boot Into Windows / Startup Repair Can't Fix

Jun 4, 2012

I've been having trouble trying to get my computer to boot; I'd noticed a drop in performance (still unsure why) so decided to boot up in safe mode and poke around - it was not my original intention to install AC 5.3.0 but somehow it happened. I ran the 'deep-care' utility and everything was working fine, my computer rebooted and performed a disk check: there weren't any errors that I can remember apart from [something along the lines of] 60 reparse files. Following this my computer restarted and Windows failed to load, restarting to show me startup repair - this isn't the first time this has happened, a similar thing occurred following previous attempts at boosting speed, though before I was able to get Windows up and running using an Ubuntu installation disk... still don't understand why - no need to say that it didn't work this time. Startup repair refuses to work and my system restore points have vanished; I would try doing a repair install if I had a copy of the disk. I built the computer myself a few months back, borrowing a Windows 7 installation disk from a friend (who has now conveniently lost said disk), startup repair does tell me something about 'Problem Signatures'. [code]

View 2 Replies View Related

Startup Repair Or Boot Into BSOD

Dec 26, 2012

Recently my computer has been randomly just giving me the BSOD. Normally this problem was resolved by a simple restart but tonight about an hour before I posted this, the blue screen sent me back to startup but instead of giving me the usual "Security mode" and Regular Startup. It gave me Startup Repair and normal startup. After clicking normal startup just to see if it would correct itself like normal,my pc instantly BSOD'd, bringing me back to my two options. I've been sitting here staring at the startup repair screen for about an hour now.

View 2 Replies View Related

Laptop Won't Boot Up (can Only Go To Startup Repair)

Feb 11, 2013

I have a pavillion dv6- laptop that's stopped being able to boot up windows? It only goes to the screen with the option of starting windows normally (which brings me back to the same screen) or going to startup repair. When I go to repair it says Got some important data in c drive can't install new windows all data will wipe up what to do now?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved