Can Limux Can Be Used As Dual Boot Machine
Nov 23, 2011do u use Linux and Windos dual boot machine?
View 6 Replies
ADVERTISEMENT
Cloning Dual Boot Machine?
Sep 14, 20101. I have a FUJITSU MHZ2160BH G2 2.5 ATA Hard Drive which is an moving parts hard drive. Id like to replace this with a Solid State much large hard drive. Are all 2.5 Hard Drives the same in terms of the generic size? I.e. do I simply just screw the back of the laptop, take out the old and put in the new?
2. I have a three partitions that I would like to clone. I have a dual boot, Windows 7 and Ubuntu laptop with shared hosting. Is Clonezilla the best for this do you think? Its a little complicated in that Id like to copy the existing hard drive and then in the new hard drive increase the partitions by 15 gig each - and then copy the 3 partitions in.
How To Uninstall An OS On A Dual Boot Machine ?
Dec 28, 2009Ok, so I've read the tutorial on how to dual boot Windows 7 with XP (Dual Boot Installation with Windows 7 and XP)
I have Windows 7 64bit currently installed and need to dual boot with XP 32b. My question is, once I have successfully dual-booted my machine (and did what I need to do), how do I completely uninstall XP? Can I merge the two partitions back into one primary without affecting my Windows 7? I basically want my machine back the way it was before I dual-booted XP (without formatting and starting over). This possible?
Dual Boot On An Existing XP Machine
Oct 14, 2012I have a Win. XP machine. The Blackmagic hardware that I am installing wants to be in a Win. 7 64 bit machine.Can I make this a dual boot machine?
View 5 Replies View RelatedDual Install Ruined Machine?
Feb 26, 2012I had originally installed Window 7 and have been running it with no problems at all. I thought some experience with Ubuntu would be advantageous to my overall computer knowledge and as a result attempted to install Ubuntu. The install process went horribly wrong and as a result my machine will not even let me load Windows 7 from the installation disk. It goes to the black screen where the Windows is loading files and upon completion the cloudy Windows stock image comes up with the mouse pointer and does nothing further. I have the hard drive hooked up in an alternate machine in preparation for data recovery but before I proceed into these untested waters I thought I should get some advice. I have posted problems on this site before and received invaluable advice.
View 3 Replies View RelatedDual Boot Windows 7 64 And Xp 32 Dual Boot Same Drive?
Sep 12, 2011i have a new work laptop with xp sp3 on it. I want to install w7 64 bit as a dual boot, but only have 1 physical drive. i cannot remove my current installation as it is pre-build from work, but can partition the drive etc. However on trying to install w7 64 bit I get a message saying cannot install windows 7 on efi drive with mbr, not gpt. Can I do what I want without screwing up my xp installation?
View 5 Replies View RelatedWindows 7 And Linux Fedora Dual Boot With Dual Drives?
Feb 4, 2011dual booting windows 7 home premium x64 with linux fedora 14 on dual independantly dedicated drives. i am a college student with moderate computer (windows) knowledge but am doing software development and would like to play around with some linux for a class. i have no prior experience with linux and have minimal knowledge of operation. i am currently running windows 7 and would like to keep it as my primary os. i do not wish to share media files across drives or os's, windows does that just fine as is and i dont want to get into a third drive. my current drive is a 1tb wd black caviar hdd. it is also currently 2/3rds full and the desktop is about 6 months old so i would rather not partition the drive for a dual boot. i would think that there are some other advantages for the os's operating independantly off their own drives other than if one hdd dies i should still have the other with its os still ok. i have read some topics about RAID configs with dual boot setups with dual drives like this but am not very familiar with RAID. is there a RAID config that would be beneficial in this situation? i currently do not have a RAID card. my tower internals are not very accessible and i dont like the idea of disconnecting drives depending on which os i want to operate.
View 5 Replies View RelatedHow Do I Keep Win7, Dump XP From Dual Drive, Dual Boot ?
Nov 12, 2009As currently configured, XP is on drive C:, Win 7 was added to drive E:, and the system is currently run as a dual boot. Attempting to boot without the XP drive present will yield a "NTLDR is missing" error very early in the boot process.
I have already tried the following:
(1) I moved the hidden Windows Boot Manager files (bootmgr as well as the associated Boot folder) from the XP drive root to the Win 7 drive root.
(2) After physically removing the XP drive, I rebooted to the Win 7 installation DVD, and used the "Repair Your Computer" option to pull up the "Recovery Tools". Then, using the command prompt utility, ...
(3) I attempted to write a new boot sector to the Windows 7 disk using the command: Bootrec /fixboot, - that yields an error though. The Bootrec /fixmbr claimed success, but ultimately did not make Win 7 drive bootable.
I had to reconnect drive C: just to boot into Win 7 again to write this. I do have files backed up, but to format and reinstall files would take many hours beyond just the time to transfer 400 GB of data, since I have dozens of purchased applications that need to be freshly reinstalled and validated as well. Basically I want my E: drive now to be my boot drive while the C: drive is reformatted and used for general storage.
Any idea how to make my Win 7 drive bootable? Do I need a partition program that is more adept at creating a viable boot sector, or is that even the problem?
Machine Won't Repair Nor Normally Boot
Mar 5, 2012I have an Alienware M18X.The problems I'm having is when I start the laptop up I am prompt to run a recovery. Of course I do, but it brings up a "Loading Items" bar. I am not sure if this is normal, next screen that comes up is the blue wallpaper. At this point, all I see is the wallpaper, and the curser. Please make a note that there is nothing else on this screen and I let it sit on that screen for about 15 minutes. This happens with both Normally booting and the recovery option. I cannot seem to find the Safe Boot option anymore. I have both Unbuntu and Windows 7 Home Premium 64bit installed on this laptop.
View 1 Replies View RelatedDual Boot Dual Drive
Jan 2, 2010I have Win XP 32 bit on my old drive. I buy Win 7 full retail and a new HD. I set bios to boot from cd etc. Win 7 starts up. It shows the 2 drives, so I select new drive...no problems. It starts install. I leave it to do its stuff.When I come back its up and all ok.I dint get any option to boot from XP. The drive was listed as "SYSTEM" but not old Windows or anything.
Also ASUS chipset drivers dont work and they were listed as 7 drivers.I tried Vista drivers but it normally shuts down and restarts. Nothing.
BSOD Almost Every Time Boot Machine
Jan 23, 2012I usually have to boot my machine twice. I boot the first time, log into my (domain) account, and once windows loads, I get a BSOD. After that, if I reboot, the system works all day.
This happens if I'm bringing it out of sleep or hibernate too, but it has to be inactive for a few hours for it to give a BSOD.
I am running a Dell Latitude D620.
Windows 7 Pro 32 bit (fully licensed)
4 GB RAM
Intel T2500 2.00 GHz processor
Joined to a domain
Attached is the BSOD reports requested.
Boot External HDD As Virtual Machine?
Mar 21, 2011I have a HDD that has Windows 7 installed on it. I want to connect this drive to another machine, and boot it as a virtual machine. (i.e. boot the OS on the drive in another OS on machine #2).
View 8 Replies View RelatedHow To Make Windows 7 Machine Boot Up Quickly
Apr 27, 2012I have read many articles on how to make your computer boot quickly. I have tried several, but after a month or so they become very slow again. I have four laptops and three PCs in my home. While they are from different manufacturers, they are all no more then a year old and running Windows 7 Home Premium. With my Internet service I have Norton installed. My newest computer can take up to 2 full minutes, while one of the laptops can be as quick as 45-50 seconds. Specifically what is the magic formula or method of how I can get all my systems to boot up quickly and continue to do so in future?
View 29 Replies View RelatedWindows 7 64 Bit Machine Stuck In Boot Loop
May 24, 2011I have a windows 7 pro 64 bit HP desktop computer that will not load windows. I have tried safemode, safemode w/ networking, and last know good config. I've run startup repair both from windowsRE and an original windows 7 pro disk. I have attempted multiple system restores (non destructive) to a number of different dates. The system restores say that they work but the machine still loops.
I know it's just some small windows corruption. I would have no trouble backing up my files with a linux distribution live flash drive and restoring the OS but I REALLY don't want to do that. How can I identify and repair the problem without starting from scratch. I'm familiar with msdos cli, but don't know which commands (if any) will help. I also don't know of any live CD's/ tools that will allow me to fix this problem. My problem here is simply lack of information.
Windows 7 Machine Slow To Boot, Won't Keep Fonts Installed
Nov 17, 2011A couple of months ago I was working on a logo design in Adobe Illustrator CS5 (I'm a graphic designer) when the power in my town cut out for a moment. It shut the computer down, and since then I noticed that it takes quite a long time for the machine to boot up... 5 or more minutes.
Also since then, every time I buy and install a new font it does not keep the font installed. I have to continuously reinstall them. Anything installed prior to that day is fine, but new fonts since then just won't stay put.
I'm using a Dell Studio XPS with Windows 7 Pro.
How To Get Correct Username In Windows 7 Logon On Boot Up Of Machine
Jan 19, 2012Windows 7 on Novell Network. On boot up the Novell Logon screen comes up first and Username is correct and then Password is entered. The next screen is the Windows 7 Logon. The username is incorrect and no password is used. The correct username must be typed in.How do I get the correct username in the Windows 7 Logon on boot up of machine? On my XP machines the NWGINA.dll handles this procedure. What handles the boot up in Windows 7 and how do you put in the defaults?
View 2 Replies View RelatedWindows 7 Toshiba Machine Taking 20 Minutes To Boot?
Feb 17, 2012I have a friend who just picked up a brand new Toshiba laptop from Best Buy. It worked great the first two days, then suddenly slowed down to the point that it takes almost a half hour to boot. At first I thought it may be software issues so I wiped the entire computer and installed a new copy of Windows 7 from the recovery disk. This fixed nothing.Since then I have tried disabling the startup processes with msconfig Running GREP to see if he had a rootkit already.Running Avast, Malwarebytes, etc.Running Ultimate Boot CD to use their CPU, HD and Memory diagnostic tools.All of which have turned up no errors, no viruses no problems.what else could be causing such a massive delay?I plan on having him return this laptop and getting another one anyway, but Its not often I cant fix a PC I am given.
View 1 Replies View RelatedFlashing Splash Screen - Windows 7 Machine Won't Boot
Nov 19, 2012When I get to the splash screen it just blinks. It won't boot. I've tried going into the safe mode by pressing F8 at the previous screen. I've tried booting from a start disk. It won't go into the advanced boot options, and booting from a disk made no difference. This has happened before but I was able to get in through safe mode. Once I get in I can do a system restore and it will work for a while. How can I get in to my machine?
View 3 Replies View RelatedPhysical To Virtual Machine & Share Boot Drive?
May 31, 2012XP: Physical to Virtual & Share Drive w Host? Disk2VHD vs VMWare P2V? Physical-to-Virtual - Wikipedia, the free encyclopedia My Thinkpad X61T with recent 8GB DDR2 Upgrade:I have an XP Pro 3 instance on a HDD able to use 2.99 GB RAM. I can backup bunch of data files to make size smaller.I have a Win 7 x64 instance on another HDD that can use most of the 8GB RAM. Now, I'd like to do two things:
1. Virtualize the XP instance and create a Virtual Disk/ Virtual Machine, with all of the Programs & Settings intact.
2. Run this XP on top of Win 7 x64 Host and "Slowly" Migrate Files/ Settings/ MetaData etc. from GUEST XP to HOST machine.I'd prefer to be able to SHARE "the C: or Boot Drive" between the GUEST & HOST machines (as it is mounted/ running) and be able to COPY some Specific Files/Folders using ROBOCOPY/ RICHCOPY to maintain attributes that could/ easily get lost with any other copy method.Thoughts/ suggestions, experiences, comparative reviews on using Software/ Tools out of the above listed page and how could go about doing both the things.do let me know UPDATE: Some advise/ suggestions I got on another forum was. Quote: If it were me, I'd use DISK2VHD on the XP hard drive, copy it to the Windows 7 machine, install XP Mode, and fire it up like that.An alternative, in some ways better, would be to use VMWare's P2V converter on the XP machine, install VMWare Player on the 7 machine, and load the virtual machine on there.If you're just worried about docs / settings / etc, I'd suggest skipping virtualization and just use Windows Easy Transfer to make a clean break. I've used VMWare and Virtual PC a LOT in the past, but not used in a long time. I know some functionality for items 1 & 2 exist but wanted to get a comparative idea between the various options LISTED in the Link. I guess I was a little out of touch when I realized so many products existed just to do P to V. I remember only VMWare had that for a while.For me the ability to "share" & "copy" these files is critical. PS: Also, I may or may not have enough storage on the Win 7 x64 drive so I'll have to run the guest VM from a USB 2.0 HDD. Would that work okay? For now, if the suggestion give by someone from the other forum still holds. What are the pros vs cons of Disk2VHD vs VMWare? (Given the specifics of my scenario?)Esp Sharing Drive & Copying using RoboCopy/ Richcopy (To maintain Modified/ Created Dates .. Wish there was way to keep Accessed Date)
Upgrading To Windows 32bit - Machine Does Not Boot Back Up
Nov 23, 2011I am trying to upgrade windows vista ultimate 32 bit to windows 7 ultimate 32 bit on a computer i built. I've tried custom installation and the recommended installation, but the same problem arises. The problem is, whenever the computer goes to restart, it does not boot back up. So, during the installation, it starts to restart, but does not boot back up, but the machine is still running.
View 5 Replies View RelatedDual Boot Windows 7 And Vista Boot Error Winload.exe
Oct 14, 2009I installed Windows 7 on a partitioned harddrive with vista on the other half. After the installation i have my boot menu with:Windows 7, Windows Vista, Windows vista still works but when i try and load windows 7 i get a boot error message
View 9 Replies View RelatedBoot Menu Doesn't Show Up - XP And Win7 Dual Boot
Oct 30, 2009I have XP (x86) installed on one partition.
Last night I installed Windows 7 (x64) on a separate partition.
Anytime I had tried this in the past, using Vista, it always detected the Windows XP partition, and gave me a boot menu with "Earlier Version of Windows" option to boot to.
This is not so with Windows 7.
How can I get the boot menu to show both options, to boot to XP or to Windows 7?
Restore Points Missing From Windows 7 After Boot In Xp (dual Boot)
Aug 8, 2012I have dual boot with Xp and windows 7.when i log into my Xp all the restore points being deleted from windows 7.when i check the disk management information in 7 it shows windows 7 create a logical drive with my Xp primary drive.even i am hide the drive from both windows means Xp drive from windows 7 and vice verse.So i like to unmount or remove the drive partition of windows 7 from Xp and Xp primary from windows 7.So that they dont affect each others system files with being deleted the partitions.
View 1 Replies View RelatedOperating System Crashing On Boot Up - Newly Built Machine
Feb 23, 2012Last night, I built my first desktop machine. Most of my components were brand new, but I kept my old hard drive.(Which contained my Windows Home Premium 64 bit OS on it.)
When I finally went to power it up for the first time, it booted up normally, and then when it goes to the black screen with the colors swirling together to make the windows logo, right away it quickly flashed to a blue screen and then restarted.
I then went into the repair windows mode, but the automatic repairs failed. They left me with these details:
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
Problem Signature 03: unknown
Problem Signature 04: 21200924
Problem Signature 05: Autofailover
Problem Signature 06: 3
Problem Signature 07: No Root Cause
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
The hard drive with the operating sytem was working fine for me yesterday in my old machine. So I am assuming it has to be a problem with the new hardware, or I failed to connect something, or i need to change a setting.
Unable To Boot Off Safe Mode And Machine Shuts Down Abruptly
Jul 9, 2012I own a gateway notebook as my secondary machine but since I sold my workhorse it should be my main machine this week before I buy a couple new macs and transfer this buddy to my mom, as of this morning I tried to wipe off the ATI HD3200 driver and update it as the scaling options were not showing up but after I got the old driver off I tried rebooting the system and started to have problems, now I can only boot in safe mode and it shuts down abruptly after some time (does not come back up if I don't press the power button), I used driver sweeper to get rid of the old driver.
View 6 Replies View RelatedCannot Boot Windows 7 After Installing Opensuse 12.1 On Dual Boot
Apr 6, 2012I installed opensuse 12.1 on dual boot along with my other windows 7 installation. Installation of opensuse is successful and i can use it. But when I tried to use windows 7 on grub, it says bootmgr is missing. I've already encountered this problem a long time ago so i tried to use bootrec /fixmbr, bootrec /rebuildbcd and bootrec /fixboot in the recovery console in the windows 7 DVD. Rebuildbcd and fixboot did not work and it said something like it cannot find my windows installation. I also tried bootrec /scanos, it returned a windows installation on D:\Windows but my windows is in drive C. I think this has something to do with me messing up the active partition in disk management a month ago but i already fixed it by setting the active partition to the system reserved partition. Only fixmbr is successful, but now i can't boot on any OS because it says: Missing operating system.I also tried bcdboot C:\Windows but it failed with a message that goes like: Failure when attempting to copy boot information..
View 2 Replies View RelatedBoot Up Problem In Dual Boot (win7 And OSx86)
Sep 24, 2009I was having win 7 RTM and i tried to installl OSx86 in second hard disk
after few failure i successfully installed OSx86 in my secondary had disk now the problem is that i cant boot win 7
i changed boot order i tried windows 7 disk repair
but both failed
im getting some Boot mldr missing...
Actually even OSx86 is not booting i get OSx86 boot screen with two hard disk to select if i select windows disk it still says the same Boot mldr missing.
Windows 7 Won't Boot After Installing Ubuntu Dual Boot?
Dec 3, 2010I can't get Win 7 to boot after setting up dual boot (Ubuntu 10.10) on my GF's laptop. I'll describe the problem and everything that has been tried so far. REALLY hoping somebody has an idea, I'm getting desperate.I installed Ubuntu last night via the Live CD. Used the Live version to install alongside Windows and partition the drive, install Grub, etc. At reboot, after POST it would just go to a black screen with a flashing cursor. I could only run off the live CD. A forum member determined the Grub was trying to load from the wrong partition. We changed that and voila! Grub now loads properly. I can boot into Ubunto via Grub with zero problems. HOWEVER: when I try to boot into Win 7 from Grub, it just locks at the same flashing cursor of death screen. The 7 partition is till intact, I can see and access all the files on the 7 partition from within Ubuntu, however 7 will not boot. I have tried downloading and burning the Win 7 repair disk and doing all of the following,Running the automatic Start Up Repair - several times. All it does is remove Grub, but booting still goes to the flashing cursor and I have to reinstall Grub again to be able to do anything after POST.I have used the command prompt to run "bootsect /nt60 SYS /mbr". Has the same effect as above.I have used all the bootsec.exe /fixmbr, /fixboot, and /rebuildBCD commands. Again, all have the same effect and I have to reinstall Grub to get anywhere.I don't have an installation disk to try and just do a repair install because Asus apparently doesn't feel that I would need one of these. All I have is the recovery disks from the Asus AIRecovery application that want to just re-format the entire drive and start over. This isn't an option. It's my GF's laptop (mine gave up the ghost last week) and we both have WAY too much highly important data on here. Not to mention she would castrate me . Now from all my research the only other thing I've come across that sounds possible is that the boot flag needs to be set to a different partition. Somebody had a somewhat similar problem and it turned out the way Dell set up the system the boot flag had to be moved to a recovery partition and it worked fine. I'm wondering if Asus has something similar going on, but I can't figure out how to move the boot flag. I'm going on 12 straight hours of working on this now
View 9 Replies View RelatedConvert Dual Boot To Single Boot, 2 HDds
Aug 27, 2009I setup an XP/Windows 7 dual boot on two drives. Currently C: Windows 7, D:XP
Love Windows 7 and now I'm ready to convert to single boot Windows 7.
I'm not real savy re. bcdedit so will need very detailed instructions
I did find the command line in Windows 7 by going through accessories but I'm scared to go further without help.
Eventually I want to clean up the D:xp and use it for storage etc.
I'm guessing this procedure may have already be written up but I can't seem to find it.
Dual Boot - Change OS Name In Windows Boot Manager
Mar 11, 2009How to Change the OS Name in Windows Boot Manager ?
View 0 Replies View RelatedCan't Boot Into Original OS After Dual Boot Configuration
Feb 23, 2012I recently added a hard drive to my computer (SSD), and installed Windows 7 x64 onto it. The result being a dual boot system, which by default boots to the SSD, and optionally (by Windows Boot Menu), can be booted to the original drive (standard mechanical drive).
Initial setup went fine, however I decided to customize the Windows Boot Menu, so that logical names could be associated with each operating system instance. To do this I used EasyBCD and I altered the names in the Windows Boot Menu from: Quote:
Windows 7
Windows 7
to... Quote:
Windows 7 - SSD
Windows 7 - Standard Drive
Shortly after the modification I noticed that I was no longer able to boot into the original OS. Instead I was being presented with a "Repair Windows" option. Figuring that my EasyBCD "tampering" may have had something to do with the issue I decided to change the names back to "Windows 7" in the Windows Boot Menu. However doing so had no positive impact on boot up of the original OS.
After booting again into the original OS I accepted the "Repair Windows" option, and then left the computer over night to do it's "thing". After completion of the "Repair" the situation has deteriorated -
* Windows doesn't load (the same as before)
* Windows doesn't present a "Repair Windows" option (it did before)
* The computer reboots a short period after the "Starting Windows" screen is presented
As a side note the drive is in good health, and all data on it can be read from within Windows 7 when I boot to the SSD OS.