Changed The Letter Of Boot Drive And Wont Boot?
Jul 10, 2012
I recently built my computer and installed a ssd and a hdd, the OS is on the ssd which is the c drive but since it is smaller than the hdd I tried to change the letters around and make the hdd the c drive using regedit because the default install location seems to be the c drive and after restarting the computer it boots up and says preparing your desktop then goes to a blue screen with just the cursor. I tried booting in safe mode and all I get there is a black screen also
View 9 Replies
ADVERTISEMENT
Apr 3, 2012
I'm not sure what the trigger was but my C drive where my os is installed apparently took the drive letter of an external drive that I use for backup. It is now the X drive and I cannot boot. I do get the repair screen but cannot repair as there is no operating system to choose. Booting from windows disk makes no difference here.My bios (uefi) can see the disk, I can also see it from the command prompt?
View 4 Replies
View Related
Nov 10, 2009
I have windows XP pro 32 bit installed in C drive and then installed clean win 7 64bit in drive D. Everything works properly but when I boot from XP, it is in C drive and I see Windows 7 in D drive, when I boot from Windows 7, I see win 7 in C and winXP in D drive. Is it normal or is there any I can do to fix win Xp in C and Windows 7 in D?
View 3 Replies
View Related
Sep 24, 2012
I want to change the drive letter of the drive on which Windows 7 is installed.It is currently F:, and I want to change it to K:It is not possible from the Disk Management as I tried.
View 2 Replies
View Related
Nov 9, 2010
my boot drive leter. recently bought a ssd installed my edition of win7pro 64 onto it no problems except i had my old hdd still plugged in which was my c drive letter ,thus i installed operating system onto my ssd with an e drive letter.ok so i have tried to run a couple of programmes which i use which have failed because the programme is looking for a specific file in c boot directory which i obviously havent got....hope you can understand what im getting at.so big question how do i change my ssd boot drive letter to :c and that all my existing programmes will still work.
View 9 Replies
View Related
Oct 18, 2009
In 7 everything is all right.7 is c: and the boot partition is hidden.
But in XP the hidden partition is c: and visible.XP is d:,so some programs use default dir can't work.I tried disk management to change xp to c: but didn't succeed.
Anyway to change the drive letters and hide the 100m partition?
View 9 Replies
View Related
Dec 3, 2009
My goal is to run a Windows 7/Windows 7 dual boot system with one installation for day to day operations (MAIN) and then second installation strictly for gaming (GAMER).
I have successfully installed Windows 7 twice. During clean install i created 30GB partition (C: ) and put MAIN there. No problems. I loaded that up and from within Disk Management created a second partition on the same physical drive and named it (D: ).
I booted from the Windows 7 install DVD and then installed GAMER to the (D: ) partition. No problems. I am able to boot into each installation (MAIN and GAMER) from the boot manager without any troubles.
When I boot into the MAIN installation, the system path/partition is (C: ) and the os files for the second installation, GAMER, can be seen on (D: ) just fine.
However, when i boot into the GAMER installation, its system path is also (C: ) and the partition for MAIN somehow got renamed to (G: )
I would like it so that when I boot into MAIN (which was installed to C: ), that partition stays named (C: ) and when i boot into GAMER (which was installed to D: ), that partition stays named (D: ). Eventhough both installations see themselves as (C: ) when i boot into them, it does not seem to cause any problems.
So how should I do my second Windows 7 installation to a partition named (D: ) and force it to keep that name when i boot into it?
View 8 Replies
View Related
Aug 21, 2012
I have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
View 2 Replies
View Related
Apr 29, 2011
I'm using multiple hard drives to install both fedora and Windows 7. I've followed this online tutorial exactly: Dual-booting Fedora 14 and Windows 7 on a computer with 2 hard drives
The problem I seem to be facing is on the "Add a new Entry Step". His secondary OS partition has a drive letter assigned to it and I do not. I've gone into computer management and have tried to assign a drive letter to either of my secondary OS's hard drive partitions and it will not let me.
All I need is the boot loader to link to my second hard drive when the second option (OS) is chosen.
View 2 Replies
View Related
Oct 1, 2011
My new Windows 7 computer has been made unbootable because I tried to change a drive letter. What can I solve this problem ? How can I prevent the same thing happen again? I will explain what happened. Yesterday, I booted my Windows 7 computer and as it was booting I plugged in my camcorder in a spare USB port.When it booted, I saw that the letter of my external hard drive had changed from I to J. I could not have this for then the Search documents function would not work. So I opened up Disk Management and tried to change the drive letter from J to I but the letter I was not available. I had used Disk management before and I knew that the drive letter I must have been used by some obscure drive in my computer. I decided to change the F drive to R in an attempt to make the letter I available. I then tried to change the letter drive from J to I and this time the drive letter I was available. I changed the drive letter but I did not restart my computer immediately. Later I shut down the computer.But when I tried to boot up my computer again, it would not boot at all. I changed the plug fuse 3 times and the same thing happened so I know it was not plug fuse. I have all my data and my Acronis backup in my external hard drive.What am I going to do?
View 5 Replies
View Related
Jun 23, 2009
I originally was running Windows Vista x64 as my sole operating system. When the Windows 7 beta came out, I created a new partition and began dual-booting. I have been using that beta as my primary OS for several months, I think, keeping the other drive and the dual boot capability. I can't remember for sure, since I have blank DVDs but can't find a Windows 7 beta DVD, but I -think- that my method of installing the Windows 7 beta was as follows:
1. Mount Windows 7 beta ISO with Daemon Tools Lite
2. Run the setup program from it (or maybe I extracted the ISO to a directory and then ran the setup)
3. Install Windows 7 to the D: partition that I had created, while running Vista
4. The beta automatically configured dual boot. If I booted Vista, Vista viewed "itself" as drive C, and Windows 7 as something like drive D. If I booted Windows 7, it viewed "itself" as drive C, and Windows Vista as drive E. This was perfect.
I've been putting off installing the RC due to being busy/lazy, but I finally tried doing it over the weekend. I have tried four times, and all four have met with the same fate. The dual-boot configuration that gets generated looks right. Windows Vista boots viewing "itself" as drive C, and 7 as drive D. Windows 7, however, views "itself" as drive D, and Windows Vista as drive C.
View 2 Replies
View Related
Dec 5, 2009
Windows 7, 32 bit, 12 partitions on 3 hdd's, Windows 7 on C:
When migrating to Windows 7 I first tried to update my Vista which I had used happily for 2 years. Installation went fine, but there were too many problems after.
So I bought a new 1 GB hdd and installed Windows 7 there from scratch. It is on a partition with drive letter C. I copied most of my old partitions to the new hdd, went fine.
When trying to delete one of the old hdd's with EASEUS Partition Master Home 4.1.1 manager software, there is one partition on it (which once before was called C, then successfully renamed to Z ) which I can't delete. I has on it the following folders:
$RECYCLE.BIN
Boot
System Volume Information (locked)
-->and files:
BOOTSECT.BAK
bootmgr
They are only 30,5 MB in size. So I resized the partition to 1 GB.
EASEUS characterizes it as Status = System, Pri/Log = Primary. Windows Disc manager characterizes it as System, Active, Primary Partition.
My question is: Can I change the drive letter from Z to B without risking the whole system to be unbootable? (and maybe never be bootable again?) When trying I just get the usual Windows warning.
I would be most grateful for an answer explaning what and why or why not.
View 9 Replies
View Related
Jul 25, 2009
I deleted my existing OS then created two new partitions on the same drive. Then I installed Vista on one partition and that partition was properly named "c" as ususal. Then I started Windows 7 setup.exe from a different hard drive and let Windows 7 install itself into its own partition. When I got to "My Computer" the Windows 7 partition was labelled as "I" instead of the expected "C" which had never happend before when I did the same thing.
Does anyone know a save way to label the Win 7 drive as "C" while in Windows 7?
View 9 Replies
View Related
Apr 9, 2011
I needed a good backup program so I downloaded a trial of MirrorFolders. I have two identical 750GB drives in my laptop: C (my main drive) and Z (my backup drive). MirrorFolders made an identical copy of C onto Z. That wasn't what I really wanted, because C is partitioned into D and E, and MirrorFolders didn't mirror the other two partitions. The backup methodology wasn't exactly what I was looking for, so I uninstalled the program. After uninstalling MirrorFolders, the machine is now booting to the Z drive, which means I can't format it and try another backup program.
Is there a simple way to restore the boot ability of my C drive? I read a great deal about copying boot folders and such, but I wasn't exactly sure if these were the right answers and I didn't want to screw things up any worse. I figured I could go into the BIOS and disable the Z drive, but no luck. The machine couldn't find a bootable drive, even though C supposedly has the same files as Z.
View 9 Replies
View Related
Jul 19, 2012
I changed the boot drive in the BIOS to a new drive. I thought it worked but when I check Disk Managment in Windows 7 it still shows the old drive as the boot drive. Is there something I have to do in Windows to finalize the change?
View 3 Replies
View Related
Jul 19, 2012
I changed the boot drive in the BIOS to a new drive. I thought it worked but when I check Disk Managment in Windows 7 it still shows the old drive as the boot drive. Is there something I have to do in Windows to finalize the change?
View 1 Replies
View Related
Jan 14, 2012
I am trying to install a password recovery cd on laptop. I changed the order in bios but still not giving option too boot from cd. I even logged in as a guest and put an audio cd in .It didnt give option too play. I think its the cd drive. What can I do?
View 1 Replies
View Related
Nov 16, 2009
I lost my Event Viewer, and had to do a repair installation to fix it. Unfortunately, during the repair install, Windows decided to rename my second HD as the D: drive... it was K: before that. Now I cannot access any of my docs, pictures, music, or videos through the normal means... they don't show up in libraries or explorer, and apps like Restorator and Sure Thing (CD labeler) cannot find them. I think that means the paths are broken..?
It won't allow me to rename the HD back into K: (it's not listed as available). I can access the data by clicking Computer > D, and I can see the data is there, but its unusable as of now. Any ideas?
View 8 Replies
View Related
Oct 29, 2012
I was working on setting up a PC for network usage with the understanding that it hadn't been used muchpreviously.Unfortunately I found that it had a PC name already existing on the network and went to change the PC name and IP address as needed for a static IP environmentHowever, after selecting to "restart" the system never rebooted up and I cannot seem to access the CD drive to place a restore CD or basically do anything with the PC.Any ideas on what happened?I've unplugged the computer and waited a few seconds to plug it in.Once replugged it returns to having the basic lights on it blink about once every few second and appears to be otherwise disabled.
View 1 Replies
View Related
Dec 19, 2012
Spy hunter was installed and never fully installed. I removed from system but, when I startup the pc i get messeage fdisk cant find dev.sda no medium found.
View 1 Replies
View Related
Apr 4, 2012
just installed an asusM5A97 mobo. hdd and everything else stayed the same. problem is, it will only make it to boot screen no matter what. i tried repair and open normally but it still will not let windows boot.
View 4 Replies
View Related
Dec 14, 2011
I just installed a new motherboard, CPU, memory, and video card into my computer. I'm not looking to salvage my old OS install, and have all important data backed up, so I planned to just put the hardware in and boot off my windows disk to do a format and reload. However no matter what I do I can't get windows setup or an OS to load. When loading the installer it locks up at the windows splash screen. I've tried booting off the hdd and it does the same thing. I tried it in safe mode and it locks up before it finished loading all the files. I also tried booting mini XP off my Hirens 15 disk and that locks up at the splash screen too.
So at this point I ran memtest to see if it was my ram causing problems but it all tested ok. how to boot off my disk so I can format and reload?
View 9 Replies
View Related
Dec 19, 2012
Yesterday I was attempting to wipe my hard drive as I was putting my laptop for sale. Whilst it was wiping my laptop crashed and would not re boot properly but I was able to access the BIOS . I stupidly changed some settings following some advice on a forum I now cannot find and when I tried to re boot it stays on the philips page for around 10 minutes. None of the keys work, like F12, F2 ect. After ten minutes it give me a screen thats says 1.Insert your Windows installation disc and restart the computer.2.Choose your language settings, and then click "Next".3.Click "Repair your computer."If you do not have this disc, contact your system administrator or computer manufacturer for assistance.Status: 0xc000000fThis is how I understand it as my system is in Polish and Polish is not my first language and with technical language I am not fluent and I beleive thats how I made the mistake in the first place in the BIOS.
View 9 Replies
View Related
Apr 9, 2011
On my Windows 7 at the bottom left it shows:Test Mode,Windows 7,Build 9780,Also I changed the boot screen but I can't now change it back to the default, I tried using the command prompt but didn't work.
View 1 Replies
View Related
Jan 22, 2013
I recently ran a memtest86 program to check my ram so I had to change my boot priority to get the program to work. Now it seems I cant change it back. I've changed it and saved it but my cdrom still wants to boot up first. I even reset the bios with no luck.
View 9 Replies
View Related
Jun 6, 2011
All I did was open a video strored locally with no connection to the internet. Shut down computer properly. I go to start it up and start up repair kick in. I have let the thing run on startup repair over night and a total of 12 straight hours. It reboots once, maybe even twice. Then it just sit a says attempting repairs. I just did a hard shut done. I was able to pull the data off using Uburba (not sure of the spelling). The USB 2.0 is not recognized in start up repair command prompt. I had a image saved to a CD. I can't get past the username password. The one I had wrote down does not work. System restore fails because I can't it doesn't have a .DDL file or it says something. If I could get the USB 2.0 to work I have an external that has a couple of images that would be better than re-installing. I tried moving the image into the computer then using the image restore, but I learned that doesn't work because it somehow tracks were it wrote the image to. This is way I need the usb 2.0 to pull the image from my external HD.What is the default password of HomeGroupUser$?
View 3 Replies
View Related
Apr 26, 2009
ok so im having a weird problem thats probably very easy to fix.
background info: before my Windows 7 install i had 3 partitions
vista 64
xp 32
empty (soon to be linux)
when i downloaded the newest win 7 build i deleted my xp 32 partition and installed Windows 7 on that partition. because Windows 7 creates that "reserve partition" or what ever, it extended my EMPTY partition with my vista partion. which cause it to become a "logical drive" rather than a "boot" drive. aka i cannot figure out how to access my vista OS.. rather annoying since im just toying with Windows 7 atm.
View 9 Replies
View Related
Jul 24, 2010
2 months ago, I installed windows 7 pro with no problems at all. Fast forward to today, I decided to reformat because the boot would get stuck in the middle of trying to boot into windows, it wouldn't flash the windows logo. I didn't think much of it so I just reformatted. This is where my real troubles began.So I reinstall windows 7 pro with no problems (the boot disk is in there the cd drive the entire time) I install my programs and what not and install my updates. All 100% Fine. Then I take out the boot disk and restart again... and I get this error message saying:
Nvidia Boot Agent 229.0525
Copyright 2001-2005 Nvidia Corp
Copyright 1997-2000 Intel Corp
Client Mac Address: 00 30 1B BC1F59 GUID: 12973077-FFFF-FFFF-FFFF-FFFFFFFFFFFF DCHP....
Then I press escape, then it says this:
PXE-EA0: Network Boot Canceled
PXE-M0F: Exiting Nvidia Boot Agent
DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER
So the first time I got this error, I just thought, Oh, something must have happened no big deal, so I reformatted again and again. But I kept on getting the same exact error. It'll load into windows just fine when my install disc is in the cd drive, but when I take it out, that error pops up. *My windows is authentic, each time I have been able to validate my copy.* I have tried installing from my hard drive and from the install disc with same error.*
This is my current set up:
Shuttle XPC SN27P2 (Barebone) Comes with motherboard, PSU, and case.
AMD Athlon 64 X2 5200+ @2.6GHz 65W
PNY XLR8 GTS 250
OCZ Reaper Memory 4GB PC-6400 DDR2-800
WD 74GB Raptor
WD 640GB Internal
WD 2.0TB Internal
WD 1.5TB External
WD 400GB External
Cavalry 1.0TB External
Shuttle 450 Watt PSU
Logitech G15 + MX518 + FuncPad 1030 Blk on Blk
Sony Optirac 18x DVD-/+RW drive
Dual Samsung SyncMaster 225BW 22" LCD Wide Screen Monitors
So how can I get windows to boot up with out having the boot disk in the cd drive...It worked the very first time I installed windows 7 on my PC...
View 6 Replies
View Related
Nov 26, 2009
For some odd reason, after doing some changes to my partitions in Windows 7 and restarting my computer, I got the ol' "BOOTMGR is missing" message. I have the Windows 7 Repair Disc image file and a 4GB USB Flash Drive, but, sadly, no CDs. Is there any way that I can put the image file onto my USB Flash Drive and boot from it with my Acer Aspire X1200 desktop computer?
View 1 Replies
View Related
Jan 4, 2012
[code] Reboot and select proper boot device or insert boot media in selected boot devic &press any key
View 4 Replies
View Related
Mar 21, 2012
when I turn on my pc I get the follolwing error message "Reboot and select proper boot device or insert boot media in selected boot device and press a key".
View 1 Replies
View Related
