Changing Boot Drive Letter?
Nov 9, 2010
my boot drive leter. recently bought a ssd installed my edition of win7pro 64 onto it no problems except i had my old hdd still plugged in which was my c drive letter ,thus i installed operating system onto my ssd with an e drive letter.ok so i have tried to run a couple of programmes which i use which have failed because the programme is looking for a specific file in c boot directory which i obviously havent got....hope you can understand what im getting at.so big question how do i change my ssd boot drive letter to :c and that all my existing programmes will still work.
View 9 Replies
ADVERTISEMENT
Sep 21, 2012
I just got a couple of new HDDs to make notebook backups (clones) on. When I first formatted each one, using a USB dock, I set the drive letter of each one to U. Everytime I change the drives, the drive letter changes itself to E. I change them back to U but they change themselves back to E the next time I put them in the dock. What is going on here and how can I keep the drive letters from changing?
View 4 Replies
View Related
Jun 29, 2012
I had all my external drives renamed when I was using them with my old laptop running XP. Now I have a new laptop with Win 7. I'm still getting used to how things are done Win 7.I want to change my drive letters on my external drives. I used to do it in Win Explorer in XP but in Win 7, I cant figure out how to do it.when I do a search for "drive letter" or "drive name".Can someone tell me how to change drive letter assignment ??I thought the drive letter was ON the external drive .
View 3 Replies
View Related
Jan 31, 2013
I changed the drive letter of an external 2.5' HDD (from F to D).Then for some reason I suddenly can't use the drive anymore.
Now when I plug it, the error message is on Win7 is "You need to format the disk in drive" The error on Win XP is D: is not accessible which is quite weird.
The drive is not used much, it never had surface problems, etc. Of course I don't want to format it because I have some info there.
View 3 Replies
View Related
Jul 3, 2012
Currently my Windows 7 is on the C drive, now my question is this: Is there a way I can say put in a SSD, then copy my entire windows and the Programs Files, Program Files x86 and the users folder to it, then switch my old HDD to the D drive and the SSD to the C and have it work just fine? Is there an easy way to do this? or will it require me to reinstall windows to do it? Been thinking about getting a 120 GB ssd for my os/program drive, and using my 1.5 tb drive as storage.
View 3 Replies
View Related
Jul 10, 2012
I recently built my computer and installed a ssd and a hdd, the OS is on the ssd which is the c drive but since it is smaller than the hdd I tried to change the letters around and make the hdd the c drive using regedit because the default install location seems to be the c drive and after restarting the computer it boots up and says preparing your desktop then goes to a blue screen with just the cursor. I tried booting in safe mode and all I get there is a black screen also
View 9 Replies
View Related
Sep 24, 2012
I want to change the drive letter of the drive on which Windows 7 is installed.It is currently F:, and I want to change it to K:It is not possible from the Disk Management as I tried.
View 2 Replies
View Related
Jul 25, 2009
I deleted my existing OS then created two new partitions on the same drive. Then I installed Vista on one partition and that partition was properly named "c" as ususal. Then I started Windows 7 setup.exe from a different hard drive and let Windows 7 install itself into its own partition. When I got to "My Computer" the Windows 7 partition was labelled as "I" instead of the expected "C" which had never happend before when I did the same thing.
Does anyone know a save way to label the Win 7 drive as "C" while in Windows 7?
View 9 Replies
View Related
Apr 3, 2012
I'm not sure what the trigger was but my C drive where my os is installed apparently took the drive letter of an external drive that I use for backup. It is now the X drive and I cannot boot. I do get the repair screen but cannot repair as there is no operating system to choose. Booting from windows disk makes no difference here.My bios (uefi) can see the disk, I can also see it from the command prompt?
View 4 Replies
View Related
Oct 18, 2009
In 7 everything is all right.7 is c: and the boot partition is hidden.
But in XP the hidden partition is c: and visible.XP is d:,so some programs use default dir can't work.I tried disk management to change xp to c: but didn't succeed.
Anyway to change the drive letters and hide the 100m partition?
View 9 Replies
View Related
Dec 3, 2009
My goal is to run a Windows 7/Windows 7 dual boot system with one installation for day to day operations (MAIN) and then second installation strictly for gaming (GAMER).
I have successfully installed Windows 7 twice. During clean install i created 30GB partition (C: ) and put MAIN there. No problems. I loaded that up and from within Disk Management created a second partition on the same physical drive and named it (D: ).
I booted from the Windows 7 install DVD and then installed GAMER to the (D: ) partition. No problems. I am able to boot into each installation (MAIN and GAMER) from the boot manager without any troubles.
When I boot into the MAIN installation, the system path/partition is (C: ) and the os files for the second installation, GAMER, can be seen on (D: ) just fine.
However, when i boot into the GAMER installation, its system path is also (C: ) and the partition for MAIN somehow got renamed to (G: )
I would like it so that when I boot into MAIN (which was installed to C: ), that partition stays named (C: ) and when i boot into GAMER (which was installed to D: ), that partition stays named (D: ). Eventhough both installations see themselves as (C: ) when i boot into them, it does not seem to cause any problems.
So how should I do my second Windows 7 installation to a partition named (D: ) and force it to keep that name when i boot into it?
View 8 Replies
View Related
Apr 29, 2011
I'm using multiple hard drives to install both fedora and Windows 7. I've followed this online tutorial exactly: Dual-booting Fedora 14 and Windows 7 on a computer with 2 hard drives
The problem I seem to be facing is on the "Add a new Entry Step". His secondary OS partition has a drive letter assigned to it and I do not. I've gone into computer management and have tried to assign a drive letter to either of my secondary OS's hard drive partitions and it will not let me.
All I need is the boot loader to link to my second hard drive when the second option (OS) is chosen.
View 2 Replies
View Related
Nov 10, 2009
I have windows XP pro 32 bit installed in C drive and then installed clean win 7 64bit in drive D. Everything works properly but when I boot from XP, it is in C drive and I see Windows 7 in D drive, when I boot from Windows 7, I see win 7 in C and winXP in D drive. Is it normal or is there any I can do to fix win Xp in C and Windows 7 in D?
View 3 Replies
View Related
Nov 16, 2009
I lost my Event Viewer, and had to do a repair installation to fix it. Unfortunately, during the repair install, Windows decided to rename my second HD as the D: drive... it was K: before that. Now I cannot access any of my docs, pictures, music, or videos through the normal means... they don't show up in libraries or explorer, and apps like Restorator and Sure Thing (CD labeler) cannot find them. I think that means the paths are broken..?
It won't allow me to rename the HD back into K: (it's not listed as available). I can access the data by clicking Computer > D, and I can see the data is there, but its unusable as of now. Any ideas?
View 8 Replies
View Related
Jun 23, 2009
I originally was running Windows Vista x64 as my sole operating system. When the Windows 7 beta came out, I created a new partition and began dual-booting. I have been using that beta as my primary OS for several months, I think, keeping the other drive and the dual boot capability. I can't remember for sure, since I have blank DVDs but can't find a Windows 7 beta DVD, but I -think- that my method of installing the Windows 7 beta was as follows:
1. Mount Windows 7 beta ISO with Daemon Tools Lite
2. Run the setup program from it (or maybe I extracted the ISO to a directory and then ran the setup)
3. Install Windows 7 to the D: partition that I had created, while running Vista
4. The beta automatically configured dual boot. If I booted Vista, Vista viewed "itself" as drive C, and Windows 7 as something like drive D. If I booted Windows 7, it viewed "itself" as drive C, and Windows Vista as drive E. This was perfect.
I've been putting off installing the RC due to being busy/lazy, but I finally tried doing it over the weekend. I have tried four times, and all four have met with the same fate. The dual-boot configuration that gets generated looks right. Windows Vista boots viewing "itself" as drive C, and 7 as drive D. Windows 7, however, views "itself" as drive D, and Windows Vista as drive C.
View 2 Replies
View Related
Dec 5, 2009
Windows 7, 32 bit, 12 partitions on 3 hdd's, Windows 7 on C:
When migrating to Windows 7 I first tried to update my Vista which I had used happily for 2 years. Installation went fine, but there were too many problems after.
So I bought a new 1 GB hdd and installed Windows 7 there from scratch. It is on a partition with drive letter C. I copied most of my old partitions to the new hdd, went fine.
When trying to delete one of the old hdd's with EASEUS Partition Master Home 4.1.1 manager software, there is one partition on it (which once before was called C, then successfully renamed to Z ) which I can't delete. I has on it the following folders:
$RECYCLE.BIN
Boot
System Volume Information (locked)
-->and files:
BOOTSECT.BAK
bootmgr
They are only 30,5 MB in size. So I resized the partition to 1 GB.
EASEUS characterizes it as Status = System, Pri/Log = Primary. Windows Disc manager characterizes it as System, Active, Primary Partition.
My question is: Can I change the drive letter from Z to B without risking the whole system to be unbootable? (and maybe never be bootable again?) When trying I just get the usual Windows warning.
I would be most grateful for an answer explaning what and why or why not.
View 9 Replies
View Related
Sep 21, 2012
I'm sure this has come up before but I'm after more detail. I have a new PC. My 'C' drive is a SSD.A second 2 TB HDD was assigned 'E'.I will choose, where possible to load apps onto 'E' because of the size, restrictions of the SSD. So far I've been hold back but have installed MS Office 2010 on 'E' and the Canon software for a Pixma multi-function.I have now installed 3 more, 1 TB HDDs (from older PCs) and one of these is 'D'.I'd like to change the 2 TB drive to 'D' and change the existing 'D' to 'E'.Microsoft issue a warning that some windows apps will have problems if a drive letter is changed but don't specify any.If I do change the letters, will this cause problems with the path to the Office suite? If problems do arise, does reverting to the original lettering resolve things - or is the registry well and truly screwed by then? Would getting a registry backup done and having it on the desktop be of any use?
View 1 Replies
View Related
Mar 21, 2011
copied a hard drive using parted magic. I believe i need to edit a boot.ini file? Or was that something for XP? been a while since i upgraded a hard drive so i dont remember exactly what i did last time. Only thing i seem to remember clearly was to NOT plug both drives in once i copied things as windows would have problems with two hard drives, one being the clone of another. So as far as i can tell, everything has been copied. Just need to know what i need to do so windows will actually boot off of it. Not counting changing the boot settings in the bios, which i already did to no effect.
View 6 Replies
View Related
Jun 14, 2009
Vista Ultimate 64bit / Windows 7 Ultimate RC1 64bit
I successfully installed Windows 7 on a blank drive. The installation kept the drive letter "H" and name.
Drive C: Is my Vista boot drive, and I'm done with it. My plan is to change it to some higher letter of the alphabet, then .
Question I
If I change my "G" drive (Windows 7 boot drive) letter to "C" with 'Disk Management' will all be well?
Question II
Will just deleting my Vista installation cause any problems with the Windows 7 installation?
View 5 Replies
View Related
Apr 30, 2011
I need to move the sata connection for my drive "D" on the motherboard, however after moving it Windows 7 won't boot.
Gateway LX6820, 8GB Ram Windows 7 HOMEPREMIUM 64 bit Drive "C"- Intel X25V SATA SSD 40GB, has 200MB System Partiton for MBR and the rest is for the OS Drive "D"- WD Raptor SATA 150GB, has User folders, Program Data, and Programs installed
I have a fresh install of Windows 7 HOMEPREMIUM 64 bit that was done with drive "D" in one of the hotswap bays. All my tweaks, and settings changes are done and Windows operates with no problems. Now I wan't to move the drive to an internal bay. The set up and install was done using sata 4 on the motherboard but due to cable routing I need to use sata 2 for the move.
After the physical move and cable change Windows sees the Raptor as drive "E" not "D", it can't access the user profile and loads a default profile instead. This default profile won't allow access to disk management so I can change the drive letter. I have tried using Diskpart to reassign the drive letters but when I boot into Windows it changes it back to "E" again (must be due to the sata port 2 being assign "E" in an earlier configuration?). I tried using Windows repair but it changes the boot sector to"C", the "C" drive to "D" and the Raptor to "E", had to change the cables to the original locations and do a system restore to fix that one.
View 2 Replies
View Related
Apr 29, 2011
I need to move the sata connection for my drive "D" on the motherboard, however after moving it Windows 7 won't boot.
Gateway LX6820, 8GB Ram
Windows 7 HOMEPREMIUM 64 bit
Drive "C"- Intel X25V SATA SSD 40GB, has 200MB System Partiton for MBR and the rest is for the OS
Drive "D"- WD Raptor SATA 150GB, has User folders, Program Data, and Programs installed
I have a fresh install of Windows 7 HOMEPREMIUM 64 bit that was done with drive "D" in one of the hotswap bays. All my tweaks, and settings changes are done and Windows operates with no problems. Now I wan't to move the drive to an internal bay. The set up and install was done using sata 4 on the motherboard but due to cable routing I need to use sata 2 for the move. After the physical move and cable change Windows sees the Raptor as drive "E" not "D", it can't access the user profile and loads a default profile instead. This default profile won't allow access to disk management so I can change the drive letter. I have tried using Diskpart to reassign the drive letters but when I boot into Windows it changes it back to "E" again (must be due to the sata port 2 being assign "E" in an earlier configuration?). I tried using Windows repair but it changes the boot sector to"C", the "C" drive to "D" and the Raptor to "E", had to change the cables to the original locations and do a system restore to fix that one.
View 9 Replies
View Related
Jul 19, 2012
It came with 2 primary partitions: a 650 gb C drive (boot) and a 50 gb D drive (recover). Because the windows partition tool didn't let me reduce the partition size by more than 50%, I decided to use EaseUS partition master to do that. I made D drive logical and renamed it to F, made the C drive 200 gb and made a new 400 gb logical drive and named it D. Then I restarted the laptop and let the tool do its work. After this, the problem started. I couldn't get past the bios screen, and couldn't even tap F2 and F8 to get in the boot menu. When I inserted my windows 7 recovery dvd, I heard the dvd drive working, but nothing happened. When I plugged in a usb drive, however, the laptop loaded the cd drive and I could reinstall windows 7 from the cd. Windows works now, actually, even my old windows installation still works, but I still can't boot up without inserting the usb drive first.
View 3 Replies
View Related
Aug 21, 2012
I have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
View 2 Replies
View Related
Apr 25, 2011
I have Win 7 home premium on an HP laptop with 4 usb ports. I have 2 Western Digital Elements 1.5 TB drives for backups. If I plug in one of the drives, Win assigns a drive letter, but if I add the second one it doesn't.
To troubleshoot, I've plugged each drive into every usb port on the laptop, and each port reads each drive alone, but if I plug in the second drive while the first is still in, it shoes up in devices but does not get a drive letter. I tried assigning a different drive letter to the device plugged in first, but Win still doesn't assign a letter to the second drive.
View 1 Replies
View Related
Oct 12, 2012
One drive appears to have duplicated itself by populating any drive letter thats free! Tried simply deleting the ones not needed but they reappear?
View 1 Replies
View Related
Jan 18, 2013
I decided to just revert to my old XP64. At first I was gonna try to dual-boot, but the fly in the ointment was all I had was an image on my external HD, which has about 100G of other stuff on it. My disc drive would not for the life of me burn an ISO image on any of my three DVD types. And the process of trying to find how to fix the drive problem and/or create just a bootable PARTITION on a HD without effecting everything else just drove me insane...which is kind of where I am now. After a week now I just have to get back to my project. lol And if that means no fancy windows 7 internet experience..while attempting a dual-boot scenerio workaround, I shrunk partition C and created a new 5G partition at the end of it. In EaseUS, I assigned it letter B and I set it to active, figuring it was to be bootable (wrong, I know). Additionally near the same time in Folder Properties, I unhid system files, folders...etc.
NOW the System drive showed as F! Then, attempting to use EasyBCD, it told me it could not find the BCD files to begin. So, naturally it had to do with that.I thought maybe it should have been B, but why would Ease US give me that letter option?After showing Easy BCD the file it seems to be OK....there. Also in Startup & Recovery it is listed in System Startup as the default system. But is it OK?Also, should it also be active. Did I inadvertently switch it by making the new partition active? What should I do to get it to boot properly. I AM planning on booting XP from a flash drive anyway, but still.
View 2 Replies
View Related
Jun 18, 2009
My backup software's profile database is expecting to backup to H:, which was the drive letter for my external backup drive back in XP. This drive comes up in Windows 7 as K, because Windows 7 has given my four usb card reader drives the letters F,G,H,I.
Disk Management will not show these four card reader drives unless media is inserted (connected vs. disconnected). I have changed the letters for F,G,I to T,U,W, but only because I have those types of cards (SD, CF, MS)...I do not have an XD or SmartMedia card for the one dang drive I really need to change.
What are my options, other than buying the cheapest SM card I can find to make the drive visible for this task? The SmartSyncPro database has many profiles, so remapping all those to point to K would be a major hassle.
View 2 Replies
View Related
Jul 16, 2011
I am running Windows 7 Pro. Have a external dual dock connected to a estata port. One of the drives assigned letter K often comes up as E and I have to change as application is looking for K. Another disk in this dock works fine. No problems. why this might be happening or anyway to prevent? Seems like when I go to disk management and assign K it should stay that way.
View 6 Replies
View Related
Jul 23, 2009
Got this from directory opus site, but made new registry file for you.
1. - unzip drive icons to - C:DRIVE ICONS
2. run registry file
3. reboot pc
Voila!
to undo run the restoredriveicons reg file.
here is original link - http://resource.dopus.com/viewtopic.php?t=7089
View 8 Replies
View Related
Mar 22, 2012
I have a new copy of windows y 64 bit ultimate. I currently use w7 64 home premium and it is on C drive and the drive is a sata 2 drive. But when I build my new system I want to install onto a new drive which is sata 6.0 and I have made a partition on that drive (letter M) for the O/S to be installed onto ( ive allowed 150Gb ).
So my question is when I build my system and am ready to install w7 can I install onto drive M on the new sata 6.0 drive?
I will unplug the old boot drive as I understand windows will boot to that if I dont unplug it, then when I have installed new O/S on the new drive, partition "M", I will plug it back in and format the old boot drive.
So then windows will boot to drive/partition M, if that works, and C drive will just become a data drive. I understand I probably will have to do some messing in bios, so any help with that will be good.
this will be my 1st build but I am not to bad with computers and have changed cpu's/HD's/gpu's/fans etc etc. but not mobo's and cases. And never changed a O/S onto another drive with a different boot drive letter.
View 9 Replies
View Related
Apr 14, 2011
i want to change a HDD drive letter from F to D, this drive has games and apps installed on it, will those still run ok after i change the letters?
FYI the OS is on a seperate drive C
View 6 Replies
View Related
