Default Drive Letter For 'System' Drive In Windows 7?
Jan 18, 2013
I decided to just revert to my old XP64. At first I was gonna try to dual-boot, but the fly in the ointment was all I had was an image on my external HD, which has about 100G of other stuff on it. My disc drive would not for the life of me burn an ISO image on any of my three DVD types. And the process of trying to find how to fix the drive problem and/or create just a bootable PARTITION on a HD without effecting everything else just drove me insane...which is kind of where I am now. After a week now I just have to get back to my project. lol And if that means no fancy windows 7 internet experience..while attempting a dual-boot scenerio workaround, I shrunk partition C and created a new 5G partition at the end of it. In EaseUS, I assigned it letter B and I set it to active, figuring it was to be bootable (wrong, I know). Additionally near the same time in Folder Properties, I unhid system files, folders...etc.
NOW the System drive showed as F! Then, attempting to use EasyBCD, it told me it could not find the BCD files to begin. So, naturally it had to do with that.I thought maybe it should have been B, but why would Ease US give me that letter option?After showing Easy BCD the file it seems to be OK....there. Also in Startup & Recovery it is listed in System Startup as the default system. But is it OK?Also, should it also be active. Did I inadvertently switch it by making the new partition active? What should I do to get it to boot properly. I AM planning on booting XP from a flash drive anyway, but still.
View 2 Replies
ADVERTISEMENT
Apr 25, 2011
I have Win 7 home premium on an HP laptop with 4 usb ports. I have 2 Western Digital Elements 1.5 TB drives for backups. If I plug in one of the drives, Win assigns a drive letter, but if I add the second one it doesn't.
To troubleshoot, I've plugged each drive into every usb port on the laptop, and each port reads each drive alone, but if I plug in the second drive while the first is still in, it shoes up in devices but does not get a drive letter. I tried assigning a different drive letter to the device plugged in first, but Win still doesn't assign a letter to the second drive.
View 1 Replies
View Related
Nov 16, 2009
I lost my Event Viewer, and had to do a repair installation to fix it. Unfortunately, during the repair install, Windows decided to rename my second HD as the D: drive... it was K: before that. Now I cannot access any of my docs, pictures, music, or videos through the normal means... they don't show up in libraries or explorer, and apps like Restorator and Sure Thing (CD labeler) cannot find them. I think that means the paths are broken..?
It won't allow me to rename the HD back into K: (it's not listed as available). I can access the data by clicking Computer > D, and I can see the data is there, but its unusable as of now. Any ideas?
View 8 Replies
View Related
Mar 22, 2012
I have a new copy of windows y 64 bit ultimate. I currently use w7 64 home premium and it is on C drive and the drive is a sata 2 drive. But when I build my new system I want to install onto a new drive which is sata 6.0 and I have made a partition on that drive (letter M) for the O/S to be installed onto ( ive allowed 150Gb ).
So my question is when I build my system and am ready to install w7 can I install onto drive M on the new sata 6.0 drive?
I will unplug the old boot drive as I understand windows will boot to that if I dont unplug it, then when I have installed new O/S on the new drive, partition "M", I will plug it back in and format the old boot drive.
So then windows will boot to drive/partition M, if that works, and C drive will just become a data drive. I understand I probably will have to do some messing in bios, so any help with that will be good.
this will be my 1st build but I am not to bad with computers and have changed cpu's/HD's/gpu's/fans etc etc. but not mobo's and cases. And never changed a O/S onto another drive with a different boot drive letter.
View 9 Replies
View Related
Aug 21, 2012
I have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
View 2 Replies
View Related
Oct 12, 2012
One drive appears to have duplicated itself by populating any drive letter thats free! Tried simply deleting the ones not needed but they reappear?
View 1 Replies
View Related
Jun 18, 2009
My backup software's profile database is expecting to backup to H:, which was the drive letter for my external backup drive back in XP. This drive comes up in Windows 7 as K, because Windows 7 has given my four usb card reader drives the letters F,G,H,I.
Disk Management will not show these four card reader drives unless media is inserted (connected vs. disconnected). I have changed the letters for F,G,I to T,U,W, but only because I have those types of cards (SD, CF, MS)...I do not have an XD or SmartMedia card for the one dang drive I really need to change.
What are my options, other than buying the cheapest SM card I can find to make the drive visible for this task? The SmartSyncPro database has many profiles, so remapping all those to point to K would be a major hassle.
View 2 Replies
View Related
Jul 16, 2011
I am running Windows 7 Pro. Have a external dual dock connected to a estata port. One of the drives assigned letter K often comes up as E and I have to change as application is looking for K. Another disk in this dock works fine. No problems. why this might be happening or anyway to prevent? Seems like when I go to disk management and assign K it should stay that way.
View 6 Replies
View Related
Jul 23, 2009
Got this from directory opus site, but made new registry file for you.
1. - unzip drive icons to - C:DRIVE ICONS
2. run registry file
3. reboot pc
Voila!
to undo run the restoredriveicons reg file.
here is original link - http://resource.dopus.com/viewtopic.php?t=7089
View 8 Replies
View Related
Jul 25, 2009
I deleted my existing OS then created two new partitions on the same drive. Then I installed Vista on one partition and that partition was properly named "c" as ususal. Then I started Windows 7 setup.exe from a different hard drive and let Windows 7 install itself into its own partition. When I got to "My Computer" the Windows 7 partition was labelled as "I" instead of the expected "C" which had never happend before when I did the same thing.
Does anyone know a save way to label the Win 7 drive as "C" while in Windows 7?
View 9 Replies
View Related
Oct 20, 2011
In Windows XP, in My computer, when ! sorted drives by Name, they are sorted by the drive label. This is the what I would expect. In Windows 7, when I sorted drives by name, they are sorted by the drive letter. Is there a way to sort by drive label in Windows 7.
View 1 Replies
View Related
Feb 12, 2012
I have the operating system win 7 professional 64 bit but it quit assigning drive letters. I can see the drives (usb flash memory or usb hard drives) in the disk managment and assign a drive letter successfully. I cannot figure out what changed and now my laptop will not assign any drive letters to my external drives automatically.
View 2 Replies
View Related
Jun 29, 2012
I had all my external drives renamed when I was using them with my old laptop running XP. Now I have a new laptop with Win 7. I'm still getting used to how things are done Win 7.I want to change my drive letters on my external drives. I used to do it in Win Explorer in XP but in Win 7, I cant figure out how to do it.when I do a search for "drive letter" or "drive name".Can someone tell me how to change drive letter assignment ??I thought the drive letter was ON the external drive .
View 3 Replies
View Related
Feb 20, 2011
My windows 7 installation won't assign a drive letter to disc drives and manually trying in the device manager doesn't work either. This is also the same for virtual and external drives, it doesn't assign a letter for either...
I tried the auto fix from Micro$oft but it didn't work: [URL]
790i ftw
QX9650
GTX285x2
6gbRam
dual ssd and raptors
but doesnt run games
View 7 Replies
View Related
Jul 6, 2012
On an Asus p8z77-v mobo I can set each individual sata port as removeable or not. I am in AHCI mode. My rig has a dock for an ssd drive that I will use as a backup image. when I initialize the ssd It asks "If" I would like to assign a path and drive letter. If I assign X or Z is win 7 gonna have hissy fits if that drive is not present at boot or if I put a different ssd in that dock ?
View 3 Replies
View Related
Mar 13, 2012
I had a Mac laptop that MB crashed. I had a 3rd party turn the HD into an external drive for me so that I could access the data from it. However, when trying to hook it up to my Windows 7 pc, it is not showing in Win Explorer. After reading a few posts, a lot of people are recommending reformatting or other options that I'm afraid will destroy the data. The drive is shown in my Disk Management window as "Basic", "Healthy" and "Online", just no Drive letter?
View 4 Replies
View Related
Jun 14, 2012
I was asked by a client to get data off a circa 2004 PC that has a blown Power Supply. I removed the HDD and proceeded with my usual recovery procedure using a drive adapter cable and power supply. The problem is that I can see the drive in the Win7 Disk Manager, but I can't mount the partition. Most of the time I've not had problems with Win7. It usually just recognizes the drive and assigns a letter to the active primary partition. In this case, I can see the partition, it's active and healthy, but I can't assign it a letter. In fact, all options are "greyed out" except "Delete Partition."I've also used MiniTool Partition Wizard, but without success. Partition Wizard can assign a letter to the partition, which then shows up in Windows Explorer. If you click on the drive letter, you get the "J:\ refers to a location that is unavailable ...." I can explore the partition with Partition Wizard, but I'm unable to access the files.
Here are the Hardware particulars:Old HDD: 80GB Maxtor HDD ATA, formatted with 76GB primary partition, Active, NTFS, This was the boot drive for a PC I'm using Win7 x64. The drive is connected to my machine using a SATA/IDE Combo Drive adapter connected to a USB port on my machine. It uses the standard USB to SATA Serial Bridge Driver.
View 2 Replies
View Related
Apr 29, 2011
I'm using multiple hard drives to install both fedora and Windows 7. I've followed this online tutorial exactly: Dual-booting Fedora 14 and Windows 7 on a computer with 2 hard drives
The problem I seem to be facing is on the "Add a new Entry Step". His secondary OS partition has a drive letter assigned to it and I do not. I've gone into computer management and have tried to assign a drive letter to either of my secondary OS's hard drive partitions and it will not let me.
All I need is the boot loader to link to my second hard drive when the second option (OS) is chosen.
View 2 Replies
View Related
Jul 3, 2012
Currently my Windows 7 is on the C drive, now my question is this: Is there a way I can say put in a SSD, then copy my entire windows and the Programs Files, Program Files x86 and the users folder to it, then switch my old HDD to the D drive and the SSD to the C and have it work just fine? Is there an easy way to do this? or will it require me to reinstall windows to do it? Been thinking about getting a 120 GB ssd for my os/program drive, and using my 1.5 tb drive as storage.
View 3 Replies
View Related
Apr 14, 2011
i want to change a HDD drive letter from F to D, this drive has games and apps installed on it, will those still run ok after i change the letters?
FYI the OS is on a seperate drive C
View 6 Replies
View Related
Nov 21, 2010
I just built a new computer which I am trying to set up identical to two of my present ones. The first terabyte hard drive is divided into 5 partitions, C thru G. Windows 7 is on C and Windows XP is on D. The other three partitions are categorized storage. I also added two more terabyte drives which are supposed to be H & I. Since my CD/DVD rom had assumed "H" in Windows 7, I reassigned the drive letter "J" to it. When I installed what was supposed to be my "H" drive, it showed up as "I". When I attempted to reassign the drive letter "H" to it, "H" is not on the list of available drives, So I tried renaming it to "Q" and then back to see if "H" would show up. It didn't. I went ahead and put the final drive in It was supposed to be "I" drive and indeed it came up correctly as "I" drive. So everything is in order now except for my "H" drive which still remains as "Q" until I can figure out how to make the "H" drive letter become available again. This si important to me since I do regular synchronization between my other computers and the drive letters need to be matched on all of them.I am not on the new computer right now, but on my last built one which has the same setup. I didn't seem to have any problem on this one since the drive letters are all on order. I've never had a lick of trouble getting them right on the XP partitions.What do I need to do to get "H" back on the list of available drive letters?
View 4 Replies
View Related
Mar 31, 2009
I previously shared my iTunes library from my desktop computer which was running Xp x64 Professional, and accessed the library through a M: drive that I could access on my laptop and other computers in the house. I set up the M drive following these instructions found here from LifeHacker and here from Microsoft previously.
I decided to try the same with 7 and everything goes according to plan until I get to the part where I go to add the new "M" drive and I can not click to "Assign the following drive letter" followed by letters that I can assign this new drive. I can only select "Mount in the following empty NTFS folder." Is anyone familliar with this issue and tell me what I am doing wrong?
View 0 Replies
View Related
Sep 21, 2012
I just got a couple of new HDDs to make notebook backups (clones) on. When I first formatted each one, using a USB dock, I set the drive letter of each one to U. Everytime I change the drives, the drive letter changes itself to E. I change them back to U but they change themselves back to E the next time I put them in the dock. What is going on here and how can I keep the drive letters from changing?
View 4 Replies
View Related
Mar 26, 2010
Recently I have found that when I attach an USB drive to my system I have to go into "Administrative Tools -> Computer Management - Disk Management" and manually change the 'Drive Letter and Path' for the drive.
Does anyone know how to get Windows to assign a drive letter to the USB drive automatically?
View 4 Replies
View Related
Jul 16, 2010
till 2 days ago, when I connected a USB stick or any other USB device, it was given a driver letter automatically and a window prompted for which actions I want to do.Now (after a windows update?), the drive doesn't receive a drive letter automatically. I have to go into disc manager a give manually a drive letter in order to be able to use the drive.
View 4 Replies
View Related
Aug 20, 2010
I had windows 7 on a SSD drive, assigned C: by windows 7, but it was full so I decided I'd clone it onto a bigger SSD drive using Acronis Disk Director. Went swimmingly I thought, both drives contained the same data. I wasn't too sure what my next step ought to be, whether acronis will have sorted it so that my new SSD now has the orginal SSD's drive letter or not. If it did, it will be mean a simple transition. But you guessed it, it left the drive letters the same, so when I booted up, it loaded from the orginal SSD. I then changed the original SSD drive letter, and used EasyBCD to remove the original boot and create a new one with the new SSD. Unfortunate now when I boot up Windows 7 I get a Preparing Your Desktop message for a couple of mins, but it's then followed by a screen with a cursor but no desktop icons or taskbar. It also seemed unresponsive to keyboard strokes.
View 3 Replies
View Related
Nov 4, 2010
I have a triple boot system:
C - Windows 7 Ultimate - SSD array D - Data - WD 640 spinner 1 E - Windows 7 Pro - 1st partition on WD 640 spinner 2 F - Windows 7 Enterprise - 2nd partition WD 640 spinner 2
Using Acronis True Image 2010, I keep 2 images of each OS on D.I'd like to put an image of C onto E, then make some changes to it. I think I tried this back in the Vista beta days, but can't recall if I ever got it to work, tempted to say "no".
View 9 Replies
View Related
Nov 22, 2011
Windows 7 Ultimate How can I use a specific Letter for a drive?
View 3 Replies
View Related
May 10, 2009
My C: and a couple of other partitions come up fine, but some are missing.I go into Disk Management to assign a drive letter to these parititions but I get an error."The operation failed to complete because the Disk Management console view is not up to date. Refresh the view using the Refresh Task. If the problem persists close the Disk Management console, then restart Disk Management, or restart the computer."I've tried refreshing and restarting with no luck.I went into Vista and it shows the same thing, unassigned drives and no luck assigning a letter.
View 9 Replies
View Related
Sep 11, 2012
I have 4 USB memory sticks I use on a regular basis, a 4, a 16, a 32 and a 64 GB.This problem only happens with the 64 GB stick, and only on one of my several computers.Most of the time when I insert it, windows does not automatically assign it a drive letter. I have to into the computer management --> Disk management section and manually assign it a drive letter. Occasionally however when it is inserted, windows assigns it a drive letter just fine. This only happens on one of my laptops.It works fine of all of my other computers and every other computer I have stuck it in
View 1 Replies
View Related
Jan 17, 2009
Dual Boot Windows 7 x64 beta
XP x32
After installing Windows 7 into a new partition, the OS started up fine from the new dual boot screen, but I didn't have access to my Win XP partition from within explorer. In disk management, I was able to add a letter to my WinXP volume (I took the next available "O") and it popped up in explorer no problem. However, after restarting, Win 7 begins to load, then BSODs way too fast to think about catching with camera.
I got the option to run startup repair at the restart, and I did so. The conclusion there was that I had plugged in a device during the last session that was now causing problems. That is bogus, unless that device is my newly lettered partition. I read many a thread in here about re-lettering a partition that had lost its letter in the install (usually the other OS volume in a dual-boot environment), but didn't see those posters then have issues upon restart.
I can boot into XP, although here now NONE of my drives have letters.
Any Help? I really was diggin' my Windows 7 time, and really enjoyed taking advantage of all my RAM and x64 versions of CS4 and CAD.
View 3 Replies
View Related
