Got this from directory opus site, but made new registry file for you.
1. - unzip drive icons to - C:DRIVE ICONS
2. run registry file
3. reboot pc
Voila!
to undo run the restoredriveicons reg file.
here is original link - http://resource.dopus.com/viewtopic.php?t=7089
I lost my Event Viewer, and had to do a repair installation to fix it. Unfortunately, during the repair install, Windows decided to rename my second HD as the D: drive... it was K: before that. Now I cannot access any of my docs, pictures, music, or videos through the normal means... they don't show up in libraries or explorer, and apps like Restorator and Sure Thing (CD labeler) cannot find them. I think that means the paths are broken..?
It won't allow me to rename the HD back into K: (it's not listed as available). I can access the data by clicking Computer > D, and I can see the data is there, but its unusable as of now. Any ideas?
I have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
View 2 Replies View RelatedI have Win 7 home premium on an HP laptop with 4 usb ports. I have 2 Western Digital Elements 1.5 TB drives for backups. If I plug in one of the drives, Win assigns a drive letter, but if I add the second one it doesn't.
To troubleshoot, I've plugged each drive into every usb port on the laptop, and each port reads each drive alone, but if I plug in the second drive while the first is still in, it shoes up in devices but does not get a drive letter. I tried assigning a different drive letter to the device plugged in first, but Win still doesn't assign a letter to the second drive.
One drive appears to have duplicated itself by populating any drive letter thats free! Tried simply deleting the ones not needed but they reappear?
View 1 Replies View RelatedI decided to just revert to my old XP64. At first I was gonna try to dual-boot, but the fly in the ointment was all I had was an image on my external HD, which has about 100G of other stuff on it. My disc drive would not for the life of me burn an ISO image on any of my three DVD types. And the process of trying to find how to fix the drive problem and/or create just a bootable PARTITION on a HD without effecting everything else just drove me insane...which is kind of where I am now. After a week now I just have to get back to my project. lol And if that means no fancy windows 7 internet experience..while attempting a dual-boot scenerio workaround, I shrunk partition C and created a new 5G partition at the end of it. In EaseUS, I assigned it letter B and I set it to active, figuring it was to be bootable (wrong, I know). Additionally near the same time in Folder Properties, I unhid system files, folders...etc.
NOW the System drive showed as F! Then, attempting to use EasyBCD, it told me it could not find the BCD files to begin. So, naturally it had to do with that.I thought maybe it should have been B, but why would Ease US give me that letter option?After showing Easy BCD the file it seems to be OK....there. Also in Startup & Recovery it is listed in System Startup as the default system. But is it OK?Also, should it also be active. Did I inadvertently switch it by making the new partition active? What should I do to get it to boot properly. I AM planning on booting XP from a flash drive anyway, but still.
My backup software's profile database is expecting to backup to H:, which was the drive letter for my external backup drive back in XP. This drive comes up in Windows 7 as K, because Windows 7 has given my four usb card reader drives the letters F,G,H,I.
Disk Management will not show these four card reader drives unless media is inserted (connected vs. disconnected). I have changed the letters for F,G,I to T,U,W, but only because I have those types of cards (SD, CF, MS)...I do not have an XD or SmartMedia card for the one dang drive I really need to change.
What are my options, other than buying the cheapest SM card I can find to make the drive visible for this task? The SmartSyncPro database has many profiles, so remapping all those to point to K would be a major hassle.
I am running Windows 7 Pro. Have a external dual dock connected to a estata port. One of the drives assigned letter K often comes up as E and I have to change as application is looking for K. Another disk in this dock works fine. No problems. why this might be happening or anyway to prevent? Seems like when I go to disk management and assign K it should stay that way.
View 6 Replies View RelatedI deleted my existing OS then created two new partitions on the same drive. Then I installed Vista on one partition and that partition was properly named "c" as ususal. Then I started Windows 7 setup.exe from a different hard drive and let Windows 7 install itself into its own partition. When I got to "My Computer" the Windows 7 partition was labelled as "I" instead of the expected "C" which had never happend before when I did the same thing.
Does anyone know a save way to label the Win 7 drive as "C" while in Windows 7?
I have a new copy of windows y 64 bit ultimate. I currently use w7 64 home premium and it is on C drive and the drive is a sata 2 drive. But when I build my new system I want to install onto a new drive which is sata 6.0 and I have made a partition on that drive (letter M) for the O/S to be installed onto ( ive allowed 150Gb ).
So my question is when I build my system and am ready to install w7 can I install onto drive M on the new sata 6.0 drive?
I will unplug the old boot drive as I understand windows will boot to that if I dont unplug it, then when I have installed new O/S on the new drive, partition "M", I will plug it back in and format the old boot drive.
So then windows will boot to drive/partition M, if that works, and C drive will just become a data drive. I understand I probably will have to do some messing in bios, so any help with that will be good.
this will be my 1st build but I am not to bad with computers and have changed cpu's/HD's/gpu's/fans etc etc. but not mobo's and cases. And never changed a O/S onto another drive with a different boot drive letter.
In Windows XP, in My computer, when ! sorted drives by Name, they are sorted by the drive label. This is the what I would expect. In Windows 7, when I sorted drives by name, they are sorted by the drive letter. Is there a way to sort by drive label in Windows 7.
View 1 Replies View RelatedI just started having an issue on a clean install of Windows 7 SP1 build 7601.The icons for the W & Z partitions is suddenly showing as a broken link.I have tried right clicking on each partition > properties > customize > restore default folder picture and there is no change for either to update the icon.
View 2 Replies View Relatedi want to change a HDD drive letter from F to D, this drive has games and apps installed on it, will those still run ok after i change the letters?
FYI the OS is on a seperate drive C
I just built a new computer which I am trying to set up identical to two of my present ones. The first terabyte hard drive is divided into 5 partitions, C thru G. Windows 7 is on C and Windows XP is on D. The other three partitions are categorized storage. I also added two more terabyte drives which are supposed to be H & I. Since my CD/DVD rom had assumed "H" in Windows 7, I reassigned the drive letter "J" to it. When I installed what was supposed to be my "H" drive, it showed up as "I". When I attempted to reassign the drive letter "H" to it, "H" is not on the list of available drives, So I tried renaming it to "Q" and then back to see if "H" would show up. It didn't. I went ahead and put the final drive in It was supposed to be "I" drive and indeed it came up correctly as "I" drive. So everything is in order now except for my "H" drive which still remains as "Q" until I can figure out how to make the "H" drive letter become available again. This si important to me since I do regular synchronization between my other computers and the drive letters need to be matched on all of them.I am not on the new computer right now, but on my last built one which has the same setup. I didn't seem to have any problem on this one since the drive letters are all on order. I've never had a lick of trouble getting them right on the XP partitions.What do I need to do to get "H" back on the list of available drive letters?
View 4 Replies View RelatedI previously shared my iTunes library from my desktop computer which was running Xp x64 Professional, and accessed the library through a M: drive that I could access on my laptop and other computers in the house. I set up the M drive following these instructions found here from LifeHacker and here from Microsoft previously.
I decided to try the same with 7 and everything goes according to plan until I get to the part where I go to add the new "M" drive and I can not click to "Assign the following drive letter" followed by letters that I can assign this new drive. I can only select "Mount in the following empty NTFS folder." Is anyone familliar with this issue and tell me what I am doing wrong?
I just got a couple of new HDDs to make notebook backups (clones) on. When I first formatted each one, using a USB dock, I set the drive letter of each one to U. Everytime I change the drives, the drive letter changes itself to E. I change them back to U but they change themselves back to E the next time I put them in the dock. What is going on here and how can I keep the drive letters from changing?
View 4 Replies View RelatedRecently I have found that when I attach an USB drive to my system I have to go into "Administrative Tools -> Computer Management - Disk Management" and manually change the 'Drive Letter and Path' for the drive.
Does anyone know how to get Windows to assign a drive letter to the USB drive automatically?
till 2 days ago, when I connected a USB stick or any other USB device, it was given a driver letter automatically and a window prompted for which actions I want to do.Now (after a windows update?), the drive doesn't receive a drive letter automatically. I have to go into disc manager a give manually a drive letter in order to be able to use the drive.
View 4 Replies View RelatedI had windows 7 on a SSD drive, assigned C: by windows 7, but it was full so I decided I'd clone it onto a bigger SSD drive using Acronis Disk Director. Went swimmingly I thought, both drives contained the same data. I wasn't too sure what my next step ought to be, whether acronis will have sorted it so that my new SSD now has the orginal SSD's drive letter or not. If it did, it will be mean a simple transition. But you guessed it, it left the drive letters the same, so when I booted up, it loaded from the orginal SSD. I then changed the original SSD drive letter, and used EasyBCD to remove the original boot and create a new one with the new SSD. Unfortunate now when I boot up Windows 7 I get a Preparing Your Desktop message for a couple of mins, but it's then followed by a screen with a cursor but no desktop icons or taskbar. It also seemed unresponsive to keyboard strokes.
View 3 Replies View RelatedI have a triple boot system:
C - Windows 7 Ultimate - SSD array D - Data - WD 640 spinner 1 E - Windows 7 Pro - 1st partition on WD 640 spinner 2 F - Windows 7 Enterprise - 2nd partition WD 640 spinner 2
Using Acronis True Image 2010, I keep 2 images of each OS on D.I'd like to put an image of C onto E, then make some changes to it. I think I tried this back in the Vista beta days, but can't recall if I ever got it to work, tempted to say "no".
Windows 7 Ultimate How can I use a specific Letter for a drive?
View 3 Replies View RelatedMy C: and a couple of other partitions come up fine, but some are missing.I go into Disk Management to assign a drive letter to these parititions but I get an error."The operation failed to complete because the Disk Management console view is not up to date. Refresh the view using the Refresh Task. If the problem persists close the Disk Management console, then restart Disk Management, or restart the computer."I've tried refreshing and restarting with no luck.I went into Vista and it shows the same thing, unassigned drives and no luck assigning a letter.
View 9 Replies View RelatedI have 4 USB memory sticks I use on a regular basis, a 4, a 16, a 32 and a 64 GB.This problem only happens with the 64 GB stick, and only on one of my several computers.Most of the time when I insert it, windows does not automatically assign it a drive letter. I have to into the computer management --> Disk management section and manually assign it a drive letter. Occasionally however when it is inserted, windows assigns it a drive letter just fine. This only happens on one of my laptops.It works fine of all of my other computers and every other computer I have stuck it in
View 1 Replies View RelatedDual Boot Windows 7 x64 beta
XP x32
After installing Windows 7 into a new partition, the OS started up fine from the new dual boot screen, but I didn't have access to my Win XP partition from within explorer. In disk management, I was able to add a letter to my WinXP volume (I took the next available "O") and it popped up in explorer no problem. However, after restarting, Win 7 begins to load, then BSODs way too fast to think about catching with camera.
I got the option to run startup repair at the restart, and I did so. The conclusion there was that I had plugged in a device during the last session that was now causing problems. That is bogus, unless that device is my newly lettered partition. I read many a thread in here about re-lettering a partition that had lost its letter in the install (usually the other OS volume in a dual-boot environment), but didn't see those posters then have issues upon restart.
I can boot into XP, although here now NONE of my drives have letters.
Any Help? I really was diggin' my Windows 7 time, and really enjoyed taking advantage of all my RAM and x64 versions of CS4 and CAD.
I installed Windows 7 to test it on my PC (I still use XP for most purposes). Now I want to reinstall it because I want to try a different version. Unfortunately, I would have to re-assign all drives again and I have a lot of them. Is there any way to save the current assignment and restore it when I have reinstalled Windows?
View 5 Replies View RelatedI have the operating system win 7 professional 64 bit but it quit assigning drive letters. I can see the drives (usb flash memory or usb hard drives) in the disk managment and assign a drive letter successfully. I cannot figure out what changed and now my laptop will not assign any drive letters to my external drives automatically.
View 2 Replies View RelatedI want to change the drive letter of the drive on which Windows 7 is installed.It is currently F:, and I want to change it to K:It is not possible from the Disk Management as I tried.
View 2 Replies View RelatedI have a second internal hard drive with data. Currently it is the slave. I have tried cable select with the same result. Disk management sees the drive but I cant assign it a letter. All options under Task -> All options are greyed out except delete volume. How do I give it a letter so I can access the data?.
View 4 Replies View Relatedmy boot drive leter. recently bought a ssd installed my edition of win7pro 64 onto it no problems except i had my old hdd still plugged in which was my c drive letter ,thus i installed operating system onto my ssd with an e drive letter.ok so i have tried to run a couple of programmes which i use which have failed because the programme is looking for a specific file in c boot directory which i obviously havent got....hope you can understand what im getting at.so big question how do i change my ssd boot drive letter to :c and that all my existing programmes will still work.
View 9 Replies View RelatedMy Floppy Drive has the drive letter assignment (A). I would rather have it be (F). The traditional way to change drive letters is under disk management on right-click of My Computer. However, Floppy drives are not visible in the list. How can I change the letter?
View 1 Replies View RelatedI had all my external drives renamed when I was using them with my old laptop running XP. Now I have a new laptop with Win 7. I'm still getting used to how things are done Win 7.I want to change my drive letters on my external drives. I used to do it in Win Explorer in XP but in Win 7, I cant figure out how to do it.when I do a search for "drive letter" or "drive name".Can someone tell me how to change drive letter assignment ??I thought the drive letter was ON the external drive .
View 3 Replies View Related