Can't Boot Up Without Inserting Usb Drive After Changing Partitions On Laptop?
Jul 19, 2012
It came with 2 primary partitions: a 650 gb C drive (boot) and a 50 gb D drive (recover). Because the windows partition tool didn't let me reduce the partition size by more than 50%, I decided to use EaseUS partition master to do that. I made D drive logical and renamed it to F, made the C drive 200 gb and made a new 400 gb logical drive and named it D. Then I restarted the laptop and let the tool do its work. After this, the problem started. I couldn't get past the bios screen, and couldn't even tap F2 and F8 to get in the boot menu. When I inserted my windows 7 recovery dvd, I heard the dvd drive working, but nothing happened. When I plugged in a usb drive, however, the laptop loaded the cd drive and I could reinstall windows 7 from the cd. Windows works now, actually, even my old windows installation still works, but I still can't boot up without inserting the usb drive first.
I have two HDs; on the first one (80 GBs), I have four partitions, with XP on C: (and this is the boot drive), then D:, E:, and finally Vista on F:. I have another HD, a 1 TB one, which I use for storage, and I have made a lot of partitions on it, generally about 100 GB each. When I ran the setup for 7, I selected a partition on the second drive which was labelled S:. After 7 installed, and I opened My Computer, I saw that everything was messed up, and 7 was now on C:.
I know it doesn't mean it is physically on C:, it is still on the same partition of the second HD where I installed it, but it shows its partition as C:. I used Computer Management to change most of the drive letters so that they appear as they do in XP, but every time I try to change the drive letter of 7 from C: to S:, it gives an error, something about not allowed to change drive letter of system disk which has the pagefile.
So is it at all possible to force change the drive letters so that 7 is shown on S: and XP on C:. I opened C: (the 7 installation) and found many text files in system folders and program files which point to locations on C:, so if I force a change from C: to S:, what happens to all of these - do they automatically change their paths to S:, or does the whole thing just go phut!
I had the same problem when I installed Vista, but I didn't use it all that much, and so I didn't do anything about it, but I like 7, and unlike Vista which everyone said was an intermediate product until the next version came out, 7 is here to stay. I am ready to do another clean install if there is any way around this problem.
I have 2 SSDs each partitioned into 80GB and 40GB like this:
-Drive1-80GB (boot) and Drive1-40GB -Drive2-80GB and Drive2-40GB
Drive1-80GB is already the Windows 7-64 boot partition for the system. Can I configure a software RAID-0 with Drive1-40GB and Drive2-40GB? I know this is unorthodox but I wanted to try this for a few reasons.
this is the msg appearing in a black surface of my pc. i have this gateway one zx6000 for about a year and a half.windows 7. i dont have my disc anymore. i have tried changing the bios to hard disk drive only and disabled the other devices but still not giving any changes. how will i reboot this pc without a disc?
copied a hard drive using parted magic. I believe i need to edit a boot.ini file? Or was that something for XP? been a while since i upgraded a hard drive so i dont remember exactly what i did last time. Only thing i seem to remember clearly was to NOT plug both drives in once i copied things as windows would have problems with two hard drives, one being the clone of another. So as far as i can tell, everything has been copied. Just need to know what i need to do so windows will actually boot off of it. Not counting changing the boot settings in the bios, which i already did to no effect.
my boot drive leter. recently bought a ssd installed my edition of win7pro 64 onto it no problems except i had my old hdd still plugged in which was my c drive letter ,thus i installed operating system onto my ssd with an e drive letter.ok so i have tried to run a couple of programmes which i use which have failed because the programme is looking for a specific file in c boot directory which i obviously havent got....hope you can understand what im getting at.so big question how do i change my ssd boot drive letter to :c and that all my existing programmes will still work.
So, I want to have Windows 7 Home Premium 86x and 64x versions installed on my PC with dualboot. I have 86x version of Windows 7 installed already. So, for 64x version, I have to create a new partition. The problem is, I already have 4 primary partitions, so I can't create a new one (I read somewhere that Windows have to be installed on a primary partition). Here is the picture: (Don't mind disk 2, it's just the external drive).
If I try to create a partition on "Unallocated", Acronis Disk says this:
My question is, which of these partitions on disk 1 can I safely convert to logical? If I am wrong here and I still won't be able to create a new primary partition for Windows to be installed on. I'm really not so good at this things.
Laptop running Win 7 Pro'm a bit unsure of how the hard drive is divided, and what each partition is doing. When Win Explorer open, it shows C drive (67Gb) and D drive (66.9Gb). However, on expanding the drives, ie in the left hand panes, D drive says 'empty'Having now downloaded Easus Partition Manager, it shows what apparently looks like 4 partitions, and I assume one of them is the Recovery (15Gb, of which 7Gb is used). When adding up the Gb showing in EPM it suggests a 250Gb drive but I have seemingly only got 66Gb accessible.I'd like to re-organise the drive/partitions, so that I have increased storage for general use, and the Recovery partition.
I need to move the sata connection for my drive "D" on the motherboard, however after moving it Windows 7 won't boot.
Gateway LX6820, 8GB Ram Windows 7 HOMEPREMIUM 64 bit Drive "C"- Intel X25V SATA SSD 40GB, has 200MB System Partiton for MBR and the rest is for the OS Drive "D"- WD Raptor SATA 150GB, has User folders, Program Data, and Programs installed
I have a fresh install of Windows 7 HOMEPREMIUM 64 bit that was done with drive "D" in one of the hotswap bays. All my tweaks, and settings changes are done and Windows operates with no problems. Now I wan't to move the drive to an internal bay. The set up and install was done using sata 4 on the motherboard but due to cable routing I need to use sata 2 for the move.
After the physical move and cable change Windows sees the Raptor as drive "E" not "D", it can't access the user profile and loads a default profile instead. This default profile won't allow access to disk management so I can change the drive letter. I have tried using Diskpart to reassign the drive letters but when I boot into Windows it changes it back to "E" again (must be due to the sata port 2 being assign "E" in an earlier configuration?). I tried using Windows repair but it changes the boot sector to"C", the "C" drive to "D" and the Raptor to "E", had to change the cables to the original locations and do a system restore to fix that one.
I need to move the sata connection for my drive "D" on the motherboard, however after moving it Windows 7 won't boot.
Gateway LX6820, 8GB Ram Windows 7 HOMEPREMIUM 64 bit Drive "C"- Intel X25V SATA SSD 40GB, has 200MB System Partiton for MBR and the rest is for the OS Drive "D"- WD Raptor SATA 150GB, has User folders, Program Data, and Programs installed
I have a fresh install of Windows 7 HOMEPREMIUM 64 bit that was done with drive "D" in one of the hotswap bays. All my tweaks, and settings changes are done and Windows operates with no problems. Now I wan't to move the drive to an internal bay. The set up and install was done using sata 4 on the motherboard but due to cable routing I need to use sata 2 for the move. After the physical move and cable change Windows sees the Raptor as drive "E" not "D", it can't access the user profile and loads a default profile instead. This default profile won't allow access to disk management so I can change the drive letter. I have tried using Diskpart to reassign the drive letters but when I boot into Windows it changes it back to "E" again (must be due to the sata port 2 being assign "E" in an earlier configuration?). I tried using Windows repair but it changes the boot sector to"C", the "C" drive to "D" and the Raptor to "E", had to change the cables to the original locations and do a system restore to fix that one.
I just started having an issue on a clean install of Windows 7 SP1 build 7601.The icons for the W & Z partitions is suddenly showing as a broken link.I have tried right clicking on each partition > properties > customize > restore default folder picture and there is no change for either to update the icon.
I am choosing which OS to boot by changing the boot order in my BIOS. To me, this seems clean and simple. I built 32 bit XP on one disk, then removed that disk from my system, installed a different disk, and built 64 bit Windows 7.
When both disks are installed, I change the boot order to select the OS I want, and each OS sees and can use the files on either disk.
Am I asking for trouble here, or is this as clean as I think it is? What I want is one set of user document files which can be used from whichever OS has been booted.
I have win 7 booting from a 256GB SSD. All data is elsewhere, so there is a lot of room on this drive. Are there any problems with creating a partition on the SSD to install Win 8 on? I have read tutorials on how to set up a dual-boot 7/8 system. They generally state that Win 8 should go onto a separate drive. Wouldn't a separate partition work just as well?
I have an Acer and a HP laptop. Right now, both of them have the original partitions settings: a system partition C:, a recovery partition, and a HP/Acer Tools partition. I want to shrink the system C: smaller and create a new partition just to store media files. Assuming that I have that done next week and 6 months from now, I want to use the recovery partition to restore to original settings. Will the restore process including wiping the partition I created and go back to just the C: and the one I created with the media files gets wiped?
I want to dual boot xp and windows 7 on two different partitions. And I want to have an additional partition for programs and one for user documents. Is it possible for the two os's to have the same shared program files directory.reason for this is to save space instead of having different installs for each just have them both run off the same directory.
I've just discovered (after a panicked hour trying to work out what was going wrong) that my boot and system partitions for windows 7 are on different hard drives. The boot partition is on my 120GB SSD and the system partition is on my 320GB WD HDD.
This means that I have to have both hard drives plugged in for my system to boot. Obviously this isn't the best set up as if one of the hard drives fails then I'm screwed! Is there any way to fix this without having to re-install windows?
I am planning to move to another country and do not want to transport my desktop Win XP system.If I were to buy a new laptop maching can I set up the hard drive from my desktop, as an external device,so that the new laptop can boot from that external drive? My XP drive is SATA.I really did not know how to categorize this question so I Windows 7, assuming the new laptop would have that OS.
I recently purchased a new motherboard. After reinstalling windows, I noticed that my primary partition is also on my Storage Drive. Is there a way to change it back to only the SSD?
I have an Acer Aspire 1810TZ with Windows 7 Home Premium 64-bit. The HDD is 160GB.Yesterday I moved (without resizing!) both the 100MB system reserved partition and my 40GB C: partition towards the "beginning" of the HDD for the purpose of creating an unallocated space of some 110GB towards the "end" of the HDD. (The C: partition had previously been shrunk using Win7 disk management and the system worked fine after reboot prior to partition move).llowing the partition move I can however not boot into Windows anymore. Windows boot manager gives the following info:Status: 0xc0000225Info: The boot selection failed because a required device is inaccessibleThe boot manager also suggests I reinstall Windows, but of course the restore and rescue DVDs I burned based on Acer's eRecovery tool does not work.
I'd like to boot a Win 7 laptop from an external hard drive with XP and software installed. Probably use a USB port input from the drive through an adapter. Is it possible to boot XP that way and read and write personal files on the drive? The drive is eSATA and is Windows 7 compatible.
I have a Sony C series 64 bit laptop. I have a 2.5" IDE drive from my old laptop which has XP.
I was thinking to image Win 7 on my Sony to a cd; so that I have a clean disk. How can I then clone my XP ide drive onto the new laptop drive - which is an Hitachi ATA (mSata?) - so that I will have a dual boot system? Although if the XP works fine, that is what I will use.
I do a sysprep 1st, then use Bart PE. However I believe Bart PE only goes to XP SP3, and I only have the whole drive - with all my docs on it. No installation disk.
Do I need to do a "sysprep"? Is it possible to "slipstream" a whole drive with all the necessary drivers? Will it be an issue if the XP is 32 bit, and my new machine is 64bit?
I am running W7 pro 64-bit. I have just installed a 1TB drive from another machine, which already had some onfo on it which I wanted to keep. I shrank the disk- using Disk Management- to create 2 partitions. Is it possible to un-shrink the disk?
Okay, so I go to do a fresh install of Windows 7 on my machine as I have sveral times. I booted from the Win 7 cd and it came to the hard drive selection page. Here's where the trouble started. I have two identical 2TB hard drives and a 3TB drive in my machine. My gut told me to unhook my 2TB drive that I use for photos and music, the other 2TB is my data (C) drive. I said to myself, "Self, you have done this so many times, no problem". Well, problem. It deleted the partitions on my data drive. It never formatted the drive though. After the first reboot, my (C) drive booted and I knew that I was in a heap of trouble.
I had installed Windows 7 on one partition and it went bad for some unknow reason so I created another clean partion and installed win 7 on it. I also added partion for music, pictures, etc. Now the question is how do I get rid of the first version since it was giving me the BSOD. It boots as though I have dual boot but the second one listed it the one I would like to get rid of leaving user files intact.
Ok, I have my WD 160GB Vraptor partition and dual booting Vista & Win 7 ultimate x64. Disk 0
My 750GB Samsung used to be my old XP + Vista dual booting and it is partitioned as such. Disk 1
I have finished transfering all the pertinent data to my USB WD 320Gb Passport so now I want to format the whole drive and leave it as Back-Up for Data, Videos & Music + the ocassional game that doesn't fit on my Primary drive.
Here's the kicker, I am new to Vista & 7, if I remember correctly, in XP I used to go to Disk managment, select the disk and tell it to format it and it was done (I never did this often so I could be confused).
At any rate, the choices I get with Win 7 are:
If I right click on Disk 1, my only choices are, Convert to Dynamic Disk or Offline Right clicking on either of the other Disk 1 partitions gives me more choices. Format, Shrink or Delete volume My issue is that I do not want to have 2 more partitions but a full drive. I am sure that one of those options is the one I may need but I just don't know which one to choose and I really hate to work twice (if not more) to get to where I want to go.
any help tips or directions you guy may want to throw my way?
P.S.: I think I am over thiking this and as soon as I delete the volume, the partitions will go away and I am going to end where I want but I just like to be sure.
Have two internal hard drives.Thought would be good to partition them for organization.Have found that this slows Lightroom down.Can I unpartition without changing or losing any of the the files?
First, the information as it is. I had a hard drive issue that I'm working on currently, trying to recover I suppose what is a crashed hard drive. There are tons of errors on it, but that's not the question I have right at the moment, but some background.
I have tried to reinstall Windows on a brand new 2.5" Seagate 500GB 7200rpm HDD. I formatted the drive using the windows 7 ultimate installer and booted it using a USB booter made from the windows 7 download tool.
When I booted it up and tried to get it going, it gave me a hardware error saying "Windows wasn't able to configure the hardware and try startup repair" or something to that effect. I read around and it said that since my BIOS says the HD is in raid configuration that it needed some Intel Raid driver, which I installed and tried running, but it didn't seem to work. It says now "windows cannot repair this computer automatically". The problem signature is as follows:
Problem Event Name StartupRepairOffline Problem Signature 01: 6.1.7600.16385 Problem Signature 02: 6.1.7600.16385
[Code].....
Primary HDD in the BIOS is recognized as 500GB RAID is On as well. Trying to install Windows 7 Ultimate 64 bit.
