Okay, so I go to do a fresh install of Windows 7 on my machine as I have sveral times. I booted from the Win 7 cd and it came to the hard drive selection page. Here's where the trouble started. I have two identical 2TB hard drives and a 3TB drive in my machine. My gut told me to unhook my 2TB drive that I use for photos and music, the other 2TB is my data (C) drive. I said to myself, "Self, you have done this so many times, no problem". Well, problem. It deleted the partitions on my data drive. It never formatted the drive though. After the first reboot, my (C) drive booted and I knew that I was in a heap of trouble.
I just started having an issue on a clean install of Windows 7 SP1 build 7601.The icons for the W & Z partitions is suddenly showing as a broken link.I have tried right clicking on each partition > properties > customize > restore default folder picture and there is no change for either to update the icon.
I had installed Windows 7 on one partition and it went bad for some unknow reason so I created another clean partion and installed win 7 on it. I also added partion for music, pictures, etc. Now the question is how do I get rid of the first version since it was giving me the BSOD. It boots as though I have dual boot but the second one listed it the one I would like to get rid of leaving user files intact.
I installed Windows 7 64-bit on my computer which has only 1 hard drive (640GB). I partitioned it using XP to have 4 partitions: 1) XP Partition 2) Linux Partition 3) Linux Swap 4) Windows 7.The problem is Windows 7 cannot detect any partition besides it's own partition, so I cannot access any of my data from the other partitions (XP and ubuntu --- I don't care about ubuntu but I need the data on the XP partition). I know the other partitions exist since I can access XP still, and I believe XP can detect all 4 partitions.I went to start->menu then searched for partition and selected "Create and format hard disk partitions" and it actually detected all the partitions. The problem was the other partitions did not have drive letters associated with them.So I just right clicked and changed the drive letters.
I have a desktop PC with confused partitions (see image below).
1) C: 62.50 GB NTFS (3 GB free speace, about 2%, that's a problem) 2) 8 MB unallocated 3) "Add to C2" 66 MB NTFS 4) 39.97 GB Free space 5) D: "Data" 195.54 GB NTFS
I'd like to combine 1, 2, 3, and 4 into one partition. And then repartition in a way that allows me to install Linux (two ext3 partitions? one for swap disk?).How can I do that? Is that complicated with GParted?
I have just installed Windows 7 on a new hard drive.
If i click on My Computer i see a C drive (Windows 7) with just the one partition as i expected.
But if i right click on My Computer and go to manage then go to disk managment is see that the hard drive with Windows 7 on has two partitions one called System Reserved and is 100Mb and then the C Drive with Windows 7 on.
i just bought a new computer running windows 7 home edition. my question is, can windows 7 make an entire image of my hard drive including (and this important) the recovery partition? If It can can anyone please tell me how. i need to have a complete backup of my hard drive in case of hard drive failure.
There was originally just one HDD and I wanted all my "Media" to be in one partition and then Programme Files etc. in another (being C). This was just so that I could copy the entire 'Drive' I had created making moving videos and photos around easier.So I used the built in disk partition manager and created some unallocated space, then called that space Drive (A) - But now that (A) drive is full and I want to add an additional 40Gb to it from the original C, but I the "Extend Volume" option is greyed out on the (A) drive even with the 40Gb as Unallocated.
I dont mind C: being exposed but I'd like my data to be accessed only by me. D: is where I have some data. D: and C: are the same physical disk. E: and F: are USB Storage drives and also have my data. How can I do this?
I have a friends Samsung n150 i have just formatted the hard drive partitions with killdisc. I would like to make the hard drive have just one partition maybe two. It is currently split up into 3 or 4 partitions. Is there software i can put onto a flash stick to do this ? Or how would i go about doing this ?Reason being is because i dont want to put windows 7 onto the first partition and have loads of memory left in another partition not being used.
A folder has disappeared from an external hard drive, as confirmed by plugging it into another computer and checking, searching for several filenames it should contain on all possible drives (with hidden files shown), and searches with Recuva and testdisk of deleted files. There is no discrepancy between the size of the remaining folders and the reported size of the folder that contained it along with the remaining folders.
The drive in question is a 2TB WD Mybook external that may be showing its age- another folder had a cyclic redundancy check error, and the folder in question developed one several weeks later. I'm making plans to move my data off and have already duplicated the most important files on it.When the folder developed the CRC error mentioned in the previous paragraph, I ran scandisk. It was after running that utility that I found it had disappeared, so that is the most likely reason. However, the other folder remained (with error unfixed, eventually resolved by using testdisk to copy the folder to another drive.)
On hard drive drive only Win7 mirror image."Some Smart" deleted all. Motherboard was bad - change motherboard & memory.Start resoring windows and when it start setting for first time say config error.
I have just deleted all partitions on my laptop hard drive to install windows 7 and messed something up...I know cannot install windows 7 as it just sticks at the setup is starting screen..can I put the drive in my pc (running xp) and save it somehow ? I have nothing on the laptop to repair or anything as far as I can see ...
While installing Fedora 12, it deleted all the 5 partitions i had currently i have only 1 partition since fedora messed everything up all the data has been lost and m not even able to logon to Fedora i have deleted fedora and m in the process of installing XP during the installation of XP, i deleted the one partition i had and then formatted it using the NTFS system so that i cud install XP. is there any way i cud recover all the data i had?.i had 5 partitions with c,d,e,f and z drive total 500 GB..
Last night one of my friends was "guiding" me through an installation for Ubuntu to a flash drive. I was doing it on my current computer. I removed some partitions from the installation thinking it would just remove them from the list, I then tried to install it on the flash drive. (I also changed some of the NTFS FAT 32's around and stuff, But i don't know what that means)It then brought me to a black screen with a blinking underscore.After doing everything below, it now says Missing operating system.So I might have made things worse.I have tried the recovery Cd which I burned off of another windows7 computer, I tried bootrec.exe as well.I'm not entirely sure what to do at this point. I am currently using the same computer, but on the trail version - "try ubuntu" of ubuntu. All of my files seem to be intact. Also, when I ran one of the recovery options it had a box for listed OS's and none displayed, it also said select drivers to install to disk and brought me to system32. (I had no idea what to look at, at that point)I also did.Nothing seems to be working and I'm out of ideas and running short on time to get my work done.
My machine came with Windows7 pre-installed and no installation DVD, instead there is a separate partition labelled WINRE (5GB) for recovery purposes (I guess at least).Now I messed up my whole system and deleted all partitions but this recovery one (setting up a dual boot). I also have the System Recovery Disk and would anybody know if I can reinstall Windows 7 with these two?
I believe my 2tb external USB 3.0 hard drive has been corrupted (just the filesystem) and after trying to create a backup of my 200gb Steam games collection, the computer crashed halfway through. The culprit is the dying drive my games were on (hence my attempt to move them to the external for backup). I rebooted to only find that my hard drive was corrupt. The partitions were fine except it read as RAW not HFS+ (running Windows 7 64-bit and Macdrive).I attempted to recover data using gparted live cd and testdisk. Unfortunately I'm now left with no partitions and a "bare" drive according to Windows. I have not written any data ontop of the drive other than attempting to recover the partition map. I assume my files are intact.I have 1.2tb worth of data stored on the drive and this is important because one of the files contains every single file from my iMac before i wiped it and sold it. This file is a direct file copy (.dmg compressed) of that computer. Planning to restore to a new mac once I buy one.
Included is all of my photography work, music, movies, and other various precious files that make up my digital life. most of it irreplaceable.Is it possible to restore the partition map from Windows or bootable disc?
I have a little problem.I have windows XP and I wanted to install Windows 7.All went well till the part where I deleted the existing partitions and created new ones.The problem is after this step the installation failed and an error message appeared :,,Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart the installation.
I wanted to install a fresh installation of windows 7 on my computer so I decided to load up my boot disc.
1. I deleted my partitions until I had a maximum of 233gb of free space.
2. I created a new partition from the free space. Windows setup suggested to make a primary partition of 100 mb.
3. System created two new partitions. One is primary partition (233 gb), the other is the system partition (100 mb)
4. Proceeded to install windows on the new partition created.
5. Copying windows files went from 0% to 100% instantly
6. Stuck at Expanding windows files at 0%.
7. Restarted my computer to boot up windows to see what's wrong.
8. Windows boot manager is missing, only thing I can do is reinstall windows but I can't
9. Can't do a startup repair cause it fails.
10. Did a cmd command for bootrec.exe /FixMbr and bootrec.exe /Fixboot and both operations are successful. However, still can't load up windows desktop.
Problem: I deleted my partitions and created new ones but I can't install windows onto the partition because the screen is stuck at expanding windows files at 0%. I got an error: 0x80070017. Windows cannot install required files. The file may be corrupt or missing. I also can't load into windows desktop because bootmanager is missing.
I Upgraded My Windows7 Starter To Ultimate Recently And Everything Was Going Fine, But I Wasn't Happy With The Disk Space Because I Had Ubuntu As Second OS And I Wanted More Space For Win7. ( Ubuntu Was In The same Partition As Win7 C: ). I Searched For Ways Of Increasing The Size Of The Partition But I Didn't Understood Them So I Deleted Ubuntu. The Space Wasn't Recovered (Unallocated Space) So I Still Searched For Ways Of Making The Partition Size Bigger And i Found a Way That Said If You Right Clicked The Gray Square Of Disk Utility And Click a Phrase That i Don't Remember You Can Show the "Resize" Option Of the Partition.i Did That and i Received a Notification Dialog That Said That Said That If i Do That All The Partitions (OS's, Files, And Drivers) Would Be Deleted And I Like A DUMB Clicked "Ok" At Next Restart There Was No Boot Manager, The Boot Just Loaded Again And Again. So I Installed Ubuntu Using a Bootable USB (Current OS) And There Was No "Install Alongside Other OS" Option. I Tried To Run Windows 7 Setup Again Using a Bootable USB, But I Get Stuck at The Part That You Must Select The Drivers Needed So Windows Could Read The Partitions. I Have The CD With The Drivers But i Have a Dell Inspiron Mini 1012 Netbook With No CD Drive So i Downloaded All The Drivers That the Factory Installs From Dell.com And Saved It on A USB But the Windows 7 Setup Doesn't Recognize The Drivers, It Only Recognize The USB But Not It Contents(Drivers).I Want To Keep Using Windows 7 And All Programs i Need Windows But It Seems Like Ubuntu Is My Only Option.
I recently installed Ubuntu 10.04 on my HP Mini 110-1116NR, then deleted the partitions that had Ubuntu on them, not knowing that Ubuntu comes with GRUB2, and sets itself as the default boot for that system. Now that GRUB2 is not installed, since it was on my only HDD, it looks for the GRUB2 partition, which does not exist.
I'm here with 8 hd's all blocked, formats need them but I'm not getting or creating a partition because they are blocked, HDD Unlock saw the program but is expensive and is paid
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
I have Asus N55SF laptop, with Windows 7 SP1 64 bit. Also, I have 2 external hard drives. One with USB 3.0, and one USB 2.0. Following problems, I am going to describe below, happen to the both of them. Just to mention, external drives are tested on desktop computer and following problems do not happen.
Let me now describe what happens when I try certain actions: - When I try to copy large files (10 or more GB) I get an error that destination is no longer visible. External drives disappear from My Computer and I can't do safe remove. But when I copy files using programs FastCopy or TeraCopy everything copies well and drives do not disappear. - When I try to do Windows Backup and encrypt them using BitLocker drives also disappear, and are not visible within OS.
There is a difference between external hard with USB 3.0 port and the one with 2.0 port: - When one with 3.0 disappears after described actions I can't see it from Device Manager, I can see it only after windows reboot. USB 3.0 disk connects to one USB 3.0 port on laptop. - When one with 2.0 port disappears I can see it from Device Manager, and I only have to unplug it, and plug it in again to see it. USB 2.0 disk connects to 2 USB 2.0 ports on laptop.
Common to both disks is that when then disappear from My computer the diode on the external disk cases are still flashing, what probably means that they have some power. Both disk are formated to NTFS, and Allocation unit size is set to: Default. Their removal policy is set to: Better performance (default). On laptop I only have Windows, Office and Asus drivers. Antivirus is: MSE.
