Resizing Partitions On Hard Drive Using Disk Management.
Sep 2, 2012
There was originally just one HDD and I wanted all my "Media" to be in one partition and then Programme Files etc. in another (being C). This was just so that I could copy the entire 'Drive' I had created making moving videos and photos around easier.So I used the built in disk partition manager and created some unallocated space, then called that space Drive (A) - But now that (A) drive is full and I want to add an additional 40Gb to it from the original C, but I the "Extend Volume" option is greyed out on the (A) drive even with the 40Gb as Unallocated.
i bought a laptop and it had one drive C(OS) with 450 gb. i want the c - drive to be partitioned further 2 drives(D and E). will i able to do that ,if so please send me steps or screen shots. i followed the below steps, i partitoned using Shrink volume in Disk management and i aplit the drive as
I'm currently using a Windows 7 PC built by a friend of mine, but starting yesterday, its been acting up. The problem is there used to be two hard drives I can access, Drive B and Drive C. When I boot up the computer, BIOS only detects Drive C (if I'm not mistaken), and Disk Managements as well. I realized this when all the programs whose targets are on that drive are all broken on the desktop.So Drive B doesn't show up anywhere at all.
I have just installed Windows 7 on a new hard drive.
If i click on My Computer i see a C drive (Windows 7) with just the one partition as i expected.
But if i right click on My Computer and go to manage then go to disk managment is see that the hard drive with Windows 7 on has two partitions one called System Reserved and is 100Mb and then the C Drive with Windows 7 on.
I've just ran into what appears to be a bug with Disk Management under Windows 7. THe problem seems to go back all the way to OS reporting themselves as NT 5.2 or greater. XP x64 has the problem, Win2K3 server does and Windows 7 does. I don't have any version of Vista to check, so I don't know for sure but I'd bet its there as well. THe 32-bit version of XP which reports itself as NT 5.1 doesn't have the problem.
At any rate, the problem is Disk Management seems to count all Linux partitions as primary, even those which are logical volumes inside extended partitions on MBR drives. As such, if this erroneous count exceeds 4, it will refuse to create any more primary partitions, even though there are less than 4 actual partitions in the MBR table.
who dual boot with Linux could confirm this behavior. I've reported it on some of the MS forums, but no one seems to be interested.
I use a lot of different usb hard drives in my shop. I have two basic enclosures, a generic one that uses pata drives on a usb 2.0 cable and an Apricon USB SATA 2.0 adapter.Suddenly when I plug in a new drive device manager does see the drive and installs it in device manager. I can see the drive in Disk Management but it has no drive letter assigned, and therefore doesn't show up in Computer. I can easily just assign a letter in Disk Management and the drive immediately becomes usable. However, I would like to get Windows 7 to resume automatically assigning a drive letter.
I have tried a program called USB DriveCleanup. What it appears to have done is remove all installations of prior USB drives and when I plug in a drive that has been in the machine previously it then goes thru the install again. Yet still no drive letter. I think the program is doing what would manually be done by going into safe mode and cleaning out all the entries that build up there that don't appear in normal mode, then removes them. Basically it seems like a shortcut to manually doing it.
I also tried a registry fix that essentially asked me to delete the upper and lower filters. This seems similiar to fix for CD/DVD drives that no longer appear in Computer. This fix also didn't work.I tried removing and reinstalling the chipset drivers. Still no go.Running Windows 7 Pro SP1, H55 chipset.
My C: drive has been displaying a size of around 60 gb with 40 free even though it's a 300 gb drive. I thought the issue would resolve with a clean install, so I did that. Now I have a fresh install and i need to reinstall everything, but the problem isn't fixed. Below are some screen shots of the drive size:Disk Management, showing my C: Drive's full size ^Any suggestions of how I can reclaim this space?? I've tried a few things already to no avail. If you need any more information about my computer to help, let me know. This is pretty annoying, 'cause I want to use that extra space to install Ubuntu.Oh, I just rememberedWhen I look at the drive in Paragon Partition Manager, it shows the full Drive size, but says that the space that is missing from Windows is in use...
I have just purchased a new computer which came with Windows 7 home premium 64bit preinstalled with a 1T hard drive. I want to partition the available 931g hard drive into two partitions. I followed the instructions in Disk Management and shrunk the 931g partition by creating a 459.04g partition (blue line at top) and another simple partition of 451.38g which says it is unallocated and has a black line at the top.
HOW do I make the unallocated partition active (I have followed the new partition wizard but end up with a message box which eventually tells me no.) I have repartitioned hard drives in the distant past but used a program for that purpose which I no longer have.
I have completely formatted my hard disk with seagate seatool. Then I have installed windows xp sp3. I have made 4 partitions at that time i.e. c,d,e,f. After that I have installed windows 7 now I can't see my hdd in disk management or in device manager. Both device manager & disk management are showing me my external drives like pen drive.
After I used "Acronis Disk Director" in a HirenBoot CD to cut some space from my D drive to my C drive (boot drive), I've got this "Windows is checking the D drive" then "Corrupted master file table. Checkdisk is aborted" on my D drive. After doing some homework, I've tried corrected it by using testdisk's Fix MFT function but "Both of the MFT files are corrupted. Can't fix". I did not back up the whole partition. I do not really want to buy $60 + commercial software that TestDisk recommends just to fix this possibly once-in-a-lifetime issue. However, if recovery softwares is the only option left, then I have to use them.
I'm here with 8 hd's all blocked, formats need them but I'm not getting or creating a partition because they are blocked, HDD Unlock saw the program but is expensive and is paid
My backup software's profile database is expecting to backup to H:, which was the drive letter for my external backup drive back in XP. This drive comes up in Windows 7 as K, because Windows 7 has given my four usb card reader drives the letters F,G,H,I.
Disk Management will not show these four card reader drives unless media is inserted (connected vs. disconnected). I have changed the letters for F,G,I to T,U,W, but only because I have those types of cards (SD, CF, MS)...I do not have an XD or SmartMedia card for the one dang drive I really need to change.
What are my options, other than buying the cheapest SM card I can find to make the drive visible for this task? The SmartSyncPro database has many profiles, so remapping all those to point to K would be a major hassle.
I have a disk which is partitioned into 3 = 1 is just the mft files no drive allocated, c: is my operating system and d: was the operating system. I need to change C: to boot now rather than my d:. When i start up, I have to press f1 to get started and 2 win 7 shows up. I have to move the arrow down to select the second to boot up, how do I change it,
I have changed the permissions for the access of files and folders in the security tab of given in the properties of the Hard Disk Partition.Now I other users of the same computer cannot access the drive or make changes there. I tried hard to solve the problem but the output is "Access Denied". Any way to make this permissions to its default(or The normal state which it was). My OS is Windows 7 Ultimate x64
I needed to copy files between two PCs and didn't have a USB big enough so I took the HDD out of my Dell Vista laptop and used it as an external drive to transfer the files I needed moving. When I connected it up to the destination PC running windows 7, the drive couldn't be seen in explorer. I had to bring the drive online in Disk Management in order to be able to explore the drive and take the files I needed off of it. All was OK until I put the drive back in the Vista laptop and then found that the drive wouldn't boot. All I get is a blinking cursor after the initial Dell logo screen. like as if the BIOS can't load the drive or something.Can someone please tell me what bringing a drive online in Disk Management does to the MBR of that drive?
In my Sister's laptop, running Windows 7 Ultimate x86, all of a sudden, while she was working on the computer, the "E drive" went missing which was a partition on the hard disk (I don't remember if it was a logical or primary partition). She tried restarting the system but to no avail. So, I told her to open the "Disk management" tool in Windows 7 to see if the partition is visible in there. I did this because sometimes, in my computer, my expansion drive wouldn't show but it would be visible in the disk management tool and all I had to do was to re-assign it a drive letter. But, in this case, it wasn't visible over there.
So, now I told her to download "Mini-Tool Partition manager Home edition" and install it on her laptop. On running it, it wouldn't show the partition either. It would just show "C:", "D", "System Reserved" and unallocated space. However, when I added up the size displayed by C:, D:, System Reserved and Unallocated, it doesn't add up to the actual hard disk size. It means the partition is somewhere there but not visible. Is it possible that the partition would show up correctly if the laptop is booted into the bootable image of Mini-Tool Partition Manager?
How to force format a flash drive? I have an 8gb flash drive and I plugged it in to a speaker that plays mp3 songs. But after unplugged it, my flash drive prompts "Please insert disk" and 0mb in my computer. I tried to view it with disk management and I saw its partition type was RAW.
I have an external HDD that works on any other machine I test it on, except mine. It was working and for some reason I recently needed to use it and it didn't work. It appears in device manager but not in disk management. A drive letter might not be assigned to it, I can't see it in disk management to assign a drive letter to it.
I just started having an issue on a clean install of Windows 7 SP1 build 7601.The icons for the W & Z partitions is suddenly showing as a broken link.I have tried right clicking on each partition > properties > customize > restore default folder picture and there is no change for either to update the icon.
Okay, so I go to do a fresh install of Windows 7 on my machine as I have sveral times. I booted from the Win 7 cd and it came to the hard drive selection page. Here's where the trouble started. I have two identical 2TB hard drives and a 3TB drive in my machine. My gut told me to unhook my 2TB drive that I use for photos and music, the other 2TB is my data (C) drive. I said to myself, "Self, you have done this so many times, no problem". Well, problem. It deleted the partitions on my data drive. It never formatted the drive though. After the first reboot, my (C) drive booted and I knew that I was in a heap of trouble.
I had installed Windows 7 on one partition and it went bad for some unknow reason so I created another clean partion and installed win 7 on it. I also added partion for music, pictures, etc. Now the question is how do I get rid of the first version since it was giving me the BSOD. It boots as though I have dual boot but the second one listed it the one I would like to get rid of leaving user files intact.
I installed Windows 7 64-bit on my computer which has only 1 hard drive (640GB). I partitioned it using XP to have 4 partitions: 1) XP Partition 2) Linux Partition 3) Linux Swap 4) Windows 7.The problem is Windows 7 cannot detect any partition besides it's own partition, so I cannot access any of my data from the other partitions (XP and ubuntu --- I don't care about ubuntu but I need the data on the XP partition). I know the other partitions exist since I can access XP still, and I believe XP can detect all 4 partitions.I went to start->menu then searched for partition and selected "Create and format hard disk partitions" and it actually detected all the partitions. The problem was the other partitions did not have drive letters associated with them.So I just right clicked and changed the drive letters.
I have a desktop PC with confused partitions (see image below).
1) C: 62.50 GB NTFS (3 GB free speace, about 2%, that's a problem) 2) 8 MB unallocated 3) "Add to C2" 66 MB NTFS 4) 39.97 GB Free space 5) D: "Data" 195.54 GB NTFS
I'd like to combine 1, 2, 3, and 4 into one partition. And then repartition in a way that allows me to install Linux (two ext3 partitions? one for swap disk?).How can I do that? Is that complicated with GParted?
i just bought a new computer running windows 7 home edition. my question is, can windows 7 make an entire image of my hard drive including (and this important) the recovery partition? If It can can anyone please tell me how. i need to have a complete backup of my hard drive in case of hard drive failure.
I dont mind C: being exposed but I'd like my data to be accessed only by me. D: is where I have some data. D: and C: are the same physical disk. E: and F: are USB Storage drives and also have my data. How can I do this?
I have a friends Samsung n150 i have just formatted the hard drive partitions with killdisc. I would like to make the hard drive have just one partition maybe two. It is currently split up into 3 or 4 partitions. Is there software i can put onto a flash stick to do this ? Or how would i go about doing this ?Reason being is because i dont want to put windows 7 onto the first partition and have loads of memory left in another partition not being used.
