Resizing Hard Drive
Nov 21, 2009
I have just purchased a new computer which came with Windows 7 home premium 64bit preinstalled with a 1T hard drive. I want to partition the available 931g hard drive into two partitions. I followed the instructions in Disk Management and shrunk the 931g partition by creating a 459.04g partition (blue line at top) and another simple partition of 451.38g which says it is unallocated and has a black line at the top.
HOW do I make the unallocated partition active (I have followed the new partition wizard but end up with a message box which eventually tells me no.) I have repartitioned hard drives in the distant past but used a program for that purpose which I no longer have.
View 5 Replies
ADVERTISEMENT
Sep 2, 2012
There was originally just one HDD and I wanted all my "Media" to be in one partition and then Programme Files etc. in another (being C). This was just so that I could copy the entire 'Drive' I had created making moving videos and photos around easier.So I used the built in disk partition manager and created some unallocated space, then called that space Drive (A) - But now that (A) drive is full and I want to add an additional 40Gb to it from the original C, but I the "Extend Volume" option is greyed out on the (A) drive even with the 40Gb as Unallocated.
View 3 Replies
View Related
Nov 14, 2012
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies
View Related
Oct 25, 2011
So, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
View 9 Replies
View Related
Jun 16, 2011
I have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
View 2 Replies
View Related
Mar 30, 2012
I have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
View 3 Replies
View Related
Mar 4, 2010
Me and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
View 6 Replies
View Related
Dec 24, 2011
I have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
View 4 Replies
View Related
Jan 21, 2013
I have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.
View 1 Replies
View Related
Nov 16, 2009
I have Vista installed on my Hard Drive, 250 GB.
But i recently purchased a 2nd Hard Drive, 500 GB, and i want to install Windows 7 on it.
Is that possible, to have both separately?
View 3 Replies
View Related
Oct 8, 2011
make a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?
View 5 Replies
View Related
Nov 12, 2012
I am using Microsoft Outlook and I want to reduce the size of a photo and email it but when i right clic on a photo file to email there is no email selection for me to select therefore i cannot reduce the picture size.
[code]...
View 10 Replies
View Related
Dec 21, 2009
As a personal preference, I run with the taskbar positioned on the left side of the screen with autohide set. In all previous versions of Windows, when I set the width of the taskbar (usually about 1 inch, so I can see more than just the icon for each task and the quick launch area is three or four icons wide) it stays that way, whether the taskbar is locked or unlocked. With Windows 7, after I set the width, any time the system restarts, whether from Hibernation, reboot, initial startup, what-ever - the taskbar is back to the narrowest setting.
View 9 Replies
View Related
Jan 28, 2010
I have windows 7 home premium running on my compaq (HP) presario laptop. When i select a photo for the wallpaper it stretches it out even if the photo is a potrait one, which means it cuts off heads of people and so on. I have tried going into control panel> appearance and personalisation> personalisation> desktop background> and tried to change the picture position to fit or centre or anything other then stretch but it wont change anything, the wallpaper stays the same. Anyone have any ideas? i have a feeling it may be a problem with windows or something. My dad is running windows 7 home premium on his home pc and i can change the wallpaper settings on it no problem.
View 6 Replies
View Related
Sep 27, 2010
I've 4 primary partitions on my drive. I've resized the system partition (win 7) and the second one with gparted. No problem with the first but the second is gone. Disk management shows it but no way to format or change the drive letter.
View 6 Replies
View Related
Oct 4, 2011
I have upgraded my PC from Windows XP on an intel Q6600 to WIndows 7 on an AMD 1090t processor. I have my new Hard drive (C) with windows 7 and my old hard drive (D) has Windows XP with all of my files.I would like to image the old drive and store it as a "just in case" measure. The old drive has a 500GB capacity with only about 150GB used. When I image the drive the image file is ~500GB.
1. If I resize the old hard drive using "Windows 7 Disk Management" will I still be able to put that drive in my old computer and have it boot up?
2. Will the image file be only the size of the new partition?
View 7 Replies
View Related
Aug 20, 2011
when I resize windows I get a considerable CPU hit, anywhere from 35% to 70%. My processor and GPU are decent so I'm not sure why this would happen, but it sometimes causes audio crackles and other glitches. I am on the Nvidia 260.99 drivers.
View 7 Replies
View Related
May 7, 2011
I have a System partition which is running out of space. Using GParted I took 1GB from the Data partition and made it unallocated. Now, how do I add that to the System partition?
View 6 Replies
View Related
Aug 4, 2010
I have two monitors, each with a large screen. I often move a window from one to the other. If I place it near the top of the screen, Windows happily expands it to fill the whole screen, something I'd rather not have happen.How do I disable this function?
View 3 Replies
View Related
Dec 13, 2009
I want to shrink my C partition with Windows 7 installed, but Windows 7 partition manager wont shrink it past 200GB because of unmovable files. I dont know what files those are though.
If I use Partition Wizard to shrink the size to 100GB, is it safe to resize when there are unmovable files? Will this damage my system?
Why can a third party program shrink the partition, but Windows cant?
View 6 Replies
View Related
Jun 10, 2009
I installed windows seven beta a few weeks ago. I made the partition too small at the time and just recently used a live ubuntu cd's partition editor to add more space to the windows seven partition.
When I booted into vista it automatically check the drive and restarted with no problems.
When I attempted to boot into seven it gave me an error screen saying I need to reinstall my O.S.
I have lost my cd for the beta build. Is their anyway I could get a copy of the iso from Microsoft again? Or would it be easier to upgrade to the release candidate? Or can I posiblely repair without the cd (when I try to acess the extra features of f8 on the boot screen I get the same error as trying to load the os)?
View 5 Replies
View Related
Jul 24, 2012
I'm running Windows 7 Home premium 64 bit Every time I bootup my icons have changed size to medium and are shifted to the left of my screen. The auto arrange in un checked so i'm really stuck
View 2 Replies
View Related
Dec 1, 2009
during a clean install, after expanding and updating and it says "completing..." it resized the screen and then it freezes forever.
I have tried dozens of different ways to install windows7, from reinstall a clean install of vista and then just trying to upgrade, to many clean installs on windows 7.
Not only i cant load Windows7, but when i installed vista again, I cant get the media center to recognize my internal tv tuner.
View 5 Replies
View Related
Nov 18, 2011
I had an empty 70 GB partition on the left of my computer and a 230 GB on the right side but I wanted to combine them. Windows was on the 230 GB partition. I booted GParted and combined them, it copied everything from the 230 GB partition over and resized it, it took a few hours.I assumed after it wouldn't boot and all I would have to do is pop in my Windows 7 install disc and go through the repair setup. At first I ran startup repair and it would say it found a problem, and I rebooted and still nothing.. After the bios loads and it lists my DVD drives I just get a cursor _ blinking, nothing else.. No BOOTMGR missing.Odd I thought, so I ran repair again, and again it found another problem. I did this several times before it said it could not detect a problem but it still would do the same thing.I opened the cmd prompt and issued the following commands
bootrec /fixmbr
bootrec /fixboot
bootrec /rebuildocd
I tried installing a second copy of Windows 7 on a 10 GB partition on the end, it went successfully but still blinking cursor. Theres a 54 MB partition at the beginning of type Primary, the main windows one is System and the test windows 7 partition is Primary as well. I thought the first one was usually 100 MB but maybe I am wrong.Still I am stuck with a blinking cursor?
View 9 Replies
View Related
Mar 3, 2012
I was going to partition my hdd it had 72gb free and it has 160gb so i partitioning the hard drive (i used partition wizard) i always use that program.After it finished it reboot then it got stuck at bios it would not load any cd or dvd it will just hang there.There it says two options "Press F1 to run setup" i press it and says "Entering Setup..." and nothing happens and "Press ESC for BBS POPUP menu i press it and says "Boot selection popup menu has been selected"This is what the screen says:
AMIBIOS(C) American Megatrends, Inc.
BIOS Date: 02/02/05 13:04:54 Ver: 08.00.10
Copyright 2005 by Hewlett-Packard Company
[code].....
I was trying to resize my partition but it just stopped and got stuck at "Ultra DMA Mode-5, S.M.A.R.T. Capable and Status OK". As i mentioned above I tried to boot of a cd/dvd but it wouldnt work i have 2 other hard drives and the work perfect.
View 9 Replies
View Related
Sep 11, 2010
I'm wanting to install Windows 7 as a dual boot alongside my existing XP set up and have been trying to follow the excellent guide at Dual Boot Installation with Windows 7 and XP
But I'm stuck at resizing the existing partition as described at Partition or Volume - Shrink
I get as far as the command prompt and selecting the drive, but as soon as I type "shrink querymax" or "shrink desired=15360" or even just "shrink" I get the message
"Diskpart has encountered an error: This service cannot be started in safe mode"
Now I can't see any way of getting a command prompt WITHOUT starting in safe mode.
View 8 Replies
View Related
Jun 2, 2011
have a software like windows power toys for XP image resizer 32 bit only available. It there ant such for windows 7 64 bit?
View 3 Replies
View Related
Nov 11, 2012
After I used "Acronis Disk Director" in a HirenBoot CD to cut some space from my D drive to my C drive (boot drive), I've got this "Windows is checking the D drive" then "Corrupted master file table. Checkdisk is aborted" on my D drive. After doing some homework, I've tried corrected it by using testdisk's Fix MFT function but "Both of the MFT files are corrupted. Can't fix". I did not back up the whole partition. I do not really want to buy $60 + commercial software that TestDisk recommends just to fix this possibly once-in-a-lifetime issue. However, if recovery softwares is the only option left, then I have to use them.
View 1 Replies
View Related
Jul 4, 2012
Ok well i just bought this computer and i was resizing the partion and i turned off mycomputer, i restarted my computer and got the same error.I put in the windows vista restore disc and nothing at all happend even whe i ran with cdrom.
View 9 Replies
View Related
Aug 21, 2012
I have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
View 2 Replies
View Related
Sep 7, 2012
I installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive. I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked. Can someone explain how to do this, please? I'm not completely computer illiterate, but I'm not familiar with partitioning disks. It was just the one time with Ubuntu.
View 4 Replies
View Related
