Ok well i just bought this computer and i was resizing the partion and i turned off mycomputer, i restarted my computer and got the same error.I put in the windows vista restore disc and nothing at all happend even whe i ran with cdrom.
View 9 Replies
when my computer goes to sleep after it's on for a while when I move the mouse to get the screen back up it shows the backround no icons or anything to click. Same if I turn it off and turn it back on. I have to turn it off and on many times then go to safe mode and shut down then turn it on again for it to work. Just now I had to turn it on/off 4 times for it to show the icons and task bar. Usually it is left blank with nothing to click having no choice but to turn it off. Norton says no viruses. My computer is HP with windows 7. I bought it in 2011.
View 1 Replies View RelatedI had an empty 70 GB partition on the left of my computer and a 230 GB on the right side but I wanted to combine them. Windows was on the 230 GB partition. I booted GParted and combined them, it copied everything from the 230 GB partition over and resized it, it took a few hours.I assumed after it wouldn't boot and all I would have to do is pop in my Windows 7 install disc and go through the repair setup. At first I ran startup repair and it would say it found a problem, and I rebooted and still nothing.. After the bios loads and it lists my DVD drives I just get a cursor _ blinking, nothing else.. No BOOTMGR missing.Odd I thought, so I ran repair again, and again it found another problem. I did this several times before it said it could not detect a problem but it still would do the same thing.I opened the cmd prompt and issued the following commands
bootrec /fixmbr
bootrec /fixboot
bootrec /rebuildocd
I tried installing a second copy of Windows 7 on a 10 GB partition on the end, it went successfully but still blinking cursor. Theres a 54 MB partition at the beginning of type Primary, the main windows one is System and the test windows 7 partition is Primary as well. I thought the first one was usually 100 MB but maybe I am wrong.Still I am stuck with a blinking cursor?
My computer keeps freezing up and becomes non-responsive. I have an error code 43 "unknown device not working properly" The device is an unknown USB. I haven't made any changes to my laptop or docking station in a year! but this problem just started about 2 weeks ago. Should I uninstall the device - even if I have no idea what that device is? AM concerned that I might disable something important?
View 2 Replies View RelatedSo sometime within the last month or so I noticed my laptop was starting to act funny when trying to access files over the homegroup on my desktop--it was asking me for my credentials every time I restarted the computer, and wouldn't remember them even when I checked the box. As best I could tell it was using my computer's name as my domain, so when I typed in the username/password I also had to type in the "domain" of my desktop, which was simply its name.
Anyway, I didn't think much of it until recently I wanted to fix this problem, and I noticed more problems. I first removed both computers from the homegroup. Then, I tried to make a new homegroup on my laptop. But attempting this results in the error message you see in the thread title, and no error code at all. However, I can still create a homegroup with my desktop, and I can even join that homegroup from my laptop.
But after joining, I cannot access the video/audo/photo folders that are shared on the desktop and the icons for them are generic, not the unique ones for each folder type. However, once I share any additional folders from the desktop, I can then access all the folders from the laptop, once I have entered the same login information it had started asking me for weeks ago. Oddly, my desktop can access those same folders on my laptop without any trouble, as could my wife's laptop! Just to be clear what I have tried so far:
1. Deleting everything in the WindowsServiceProfilesLocalServiceAppDataRoamingPeerNetworking folder and rebooting.
2. Checking the correct services were turned on.
3. Ensured all computer names are different.
4. I tried two different routers, in case it was a hardware problem (one router is the one on which I had no problem using homegroups until a month ago).
5. Checking IPv6 is enabled, and adding the registry edit mentioned elsewhere to ensure it is enabled.
6. The usual homegroup troubleshooting, on both the laptop and the desktop.
7. Deleted all my Windows credentials.
8. Synced the clocks/timezones.
9. Tried using a wired connection. The desktop is on wi-fi as well, though, and has no problems.
Tech details:
Windows 7 Home Premium x64
Alienware M11x R3 w/Killer Wireless-N 1103
Linksys WRT-160N with DD-WRT (original router)
TP-Link WDR-3300 with stock firmware (new router)
i shuted it down.. and when i turned it on i got this..
View 1 Replies View RelatedFor some reason my computer's just not turning on. The motherboard light is on, showing the PSU is working. But when I turn on the PC it just doesn't boot or even start at all.
View 5 Replies View RelatedWhen I press the power button on my computer, everything lights up briefly, then turns and then continuously trys to start about every five seconds.
View 14 Replies View RelatedToday I have been experiencing some problems with my computer with trying to turn it on and I am noticing 3 things that are unusual
First of all, I am noticing that when it turns on, there is no where for me to log-in. The blue background shows up like normal and I have a cursor to move around so it is not frozen-just no user image and nowhere to put in my password. Also, I am noticing that the size of everything on my screen (what actually shows up), is larger than usual, including the cursor which is much larger than normal.The last thing that I am noticing when turning on my computer is that if I leave my blank screen sit for a minute or two, it will automatically start to restore the system, so I don't know why it would be doing this if i never made a command for it.
Just wondering if anyone has any solutions to this other than a complete shutdown.
I place my computer in either stand by or hibernate and for some reason in the early ours of the morning it will turn itself on and sit on the login screen.
I think it must be some kind of back system operation which is sheduled but I have no idea what or where to find it.
Any ideas?
I place my computer in either stand by or hibernate and for some reason in the early ours of the morning it will turn itself on and sit on the login screen.
I think it must be some kind of back system operation which is sheduled but I have no idea what or where to find it.
I recently built a new rig and have had no problems so far, but just the other day (even up til now), when I turn on the computer I do not see the standard post screens or even the Windows 7 loading screen. However my computer DOES boot into Windows 7 just fine and everything works as usual. But this is bothering me because if I need to make any changes to the BIOS I can't. Does anyone know how to fix this? To clarify though, computer is not hooked up to a monitor, but to an 32" Toshiba LCD TV. It's been hooked up this way since I built the rig though.
View 6 Replies View Relatedi have an msi computer about 2years old and i can be on facebook and it just shuts off completly and i have to restart it. Then it will let me back on for a while and it does the same thing.
View 3 Replies View RelatedTech Support Guy System Info Utility version 1.0.0.2
Then I asked a computer guy on STEAM and he said to try a fresh install of windows, but I already have windows 7 Home premium from the (irl)store.After trying to update the BIOS I've only failed, I've failed and failed.This happens on DiRT Showdown too, and Call OF duty Blackops 2.
-Gigabyte
-AMD FX(tm)-8120 Eight-Core Processor
-CPU speed: 3.1Ghz
-Ram: 8.2gb
-OS: Microsoft Windows 7 Home Premium Edition Service Pack 1 (build 7601), 64-bit
-Video Card: AMD Radeon HD 7800 Series
I would like disable/uncheck "Allow the computer to turn off this device to save power" on my wireless card.The problem is that it lets me uncheck it, but after rebooting it comes back again.I have seen posts about this using google, but none of them have been answered.
View 6 Replies View RelatedUp until yesterday, there were 2 users on my computer ... me and my son. NOW, when I switch on my computer, only his username appears. Mine has vanished with all my documents. how I can retrieve username and password .
View 3 Replies View RelatedMy laptop keeps turning itself off and keeps blue screen..BAD_POOL_CALLER ))..i have attached the last of my minidump .DMP files if you can access then and check the for me ...#DOWS 7 32BITINTEL DUAL CORE T3200 & 2GB X 22GB RAMADVENT
View 2 Replies View RelatedIn the last few months I have been getting error messages in my Yahoo mail account. It will not go to next email and returns an 'Error Code 5' or recently an 'Error Code 15'. It says "Sorry for the inconvenience. You have stumbled upon an unexpected, temporary problem." This happens every other email. What are these codes and why is this happening?
View 1 Replies View RelatedThe problem I am having is that whenever I log onto my computer, I can see that the date and time at the bottom right of the screen always seems to reset to 31/12/2006. I always try to fix this by going to the option where you can synchronise the date and time with the Windows server time, however, this doesn't always seem to work.Another problem I am encountering is that the computer itself seems to be cutting out at different times, for example I could be 98% complete into a full system scan with Kaspersky 2012, but the computer suddenly cuts out, this would also be the case when browsing the internet or completing some Word documents. One other thing to mention as well is that since these problems have occurred, whenever I turn on my computer, I never have to press the power button on, as it seems to turn itself on whenever I switch the power supply on. This is also not normal.
View 5 Replies View RelatedMy Desktop freezes or crashes and sometimes random restarts when i'm doing intensive gaming.Sometimes when im not doing anything but watching a movie or searching the internet. I have attached a
View 1 Replies View RelatedWindows 7 64 bit. Installed win 7 professional fall 2010. Service pack 1. Intel (R) Core (TM) 2 Quad CPU Q965 @3.00 GHZ
Had trouble with computer in March 2011 and eventually had to ship to HP with extended warranty (which ran out march 2012). They installed new motherboard and RAM. We upgraded fan (there are 2) and took RAM from 2GB to 8GM in May 2011. Has been running great, no problems til this weekend. It will shut off like being unplugged. I can't get it to stay on very long before it does it again. I am getting the sign on screen and the desktop shows up. I can do about 1 minute of operations before it goes out.
Opened up the tower and the fans are running, nothing feels hot.
I believe it has to do with hardware, I am going to try replacing the RAM. Then checking the fans.
my wireless on windows 7 stops working or changes to another flormat but it still tells me the wireless is working. the only way to get it to start is to turn off the computer. it turns of while in use.
View 1 Replies View RelatedI have a one year old Lenovo Thinkpad Edge E420s. I'm using Windows 7 Ultimate x64 with an Intel i5-2410M @2.30GHz. I bought the Ultimate OS retail as an upgrade to the Windows 7 Home edition. Recently, when I put my computer in hibernate or standby, when I turn the computer back on, it causes the BSOD and the computer restarts.I have attached the dump files.Here is the error message I get when the computer finally starts:Windows has recovered from an unexpected shutdown
Problem signature:
Problem Event Name:BlueScreen
OS Version:6.1.7601.2.1.0.256.1
Locale ID:1033
[code]....
Yesterday night I turned off my computer by pressing the power button and now my mouse and keyboard do not work anymore(in Windows). I wanted to see if it was just the mouse/keyboard itself, but I noticed nothing detects when I connect a USB device. I tried plugging it in every port and it's the same. I thought it was a hardware issue, but now I realize that it is not.
I restarted my computer and tried to get into safe mode; it worked(I was able to go up and down to select which mode I wanted to enter). Once inside safe mode and windows is loaded, the keyboard just freezes. It does not work at all. I then decided to go into bios to see what is up and everything seems right. I even screwed around and messed up my overclock settings.
So now I know my keyboard still works and it's probably a Windows issue. I wanted to see if my mouse would work. I went into Windows Repair(I might have gotten the name wrong) and voila, my mouse worked!
i need the driver for windows 7....error code 28.My laptop is a philips x58......please help....the message i get is Mass Storage Controller Driver not installed
View 1 Replies View RelatedI recently just got my firewall back up and running and now i have a new problem my windows system is turned off and i cannot get it back on. Everything seem to be working fine until about a week ago i have windows security essentials on it now, i have deleted almost everything that i do not use on my computer and yet it run absolutely slow. People tell me that i may have to restore but i was hoping for another way around that if there is any or an inexpensive software
View 1 Replies View Relatedi recently got a computer from my aunt, and decided to put windows 7 on it. Before I installed it, I put in a Geforce 8800 graphics card and a (2nd) cd rom drive. After 20 failed attempts to install windows 7 (it kept freezing at the completing installation part) it worked after i disconnected the new graphics card and one of the hard drives. Now, however, i keep on getting periodic blue screens with the following error messages : Memory Management, and PFN_List Corrupt. I ran a memory diagnostic and it said that the memory is fine. What is wrong with my computer? I also ran a system repair thing from the windows 7 disk, and it came up with this error: System File Integrity Check and Repair Error Code 0X490
My Hardware is:
AMD Anthlon 64 x2 Dual Core Processor 6000+
2 Hitachi HDT725032VLA SCSI 320 gb hard drives
Nvidia Geforce 8800 GS Graphics Card
3gb of system memory
I am using Windows 7 32-bit Premium. I'm trying to run a Batch file with several dll's, and I'm getting this error:Banner: Error Occurred - Add LicenseBody: Unable to enumerate resources. Error Code: 15106I have tried to google this, but I haven'tAlso, if I even try to register any of the Batch's DLLs manually, I get this error:Banner: RegSvr32body: The Module "C:Bla Bla Bla...." was loaded but the call to "INSERT DLL HERE" failed with error code 0x80028011c.For more information about this problem, search online using the error code as a search term.
View 1 Replies View Relatedi downloaded a disk image iso file for one of my programs. i mounted and ran the image. the setup.exe file runs fine but when i make any selction i get a "error calling shell execute. error code: 5" message and the program terminates.i tried it on a xp machine and also burned a cd but am still getting the error message
View 1 Replies View RelatedI am having great difficulty downloading and installing AVG 2012. Keeps on saying goodbye before installing and i am getting message that says MSI engine failed to install. Can't download. have tried 2 system restore points but still same.
View 1 Replies View Related
