BSOD When Turning Computer Back On After Hibernation Or Standby?
Jun 9, 2012
I have a one year old Lenovo Thinkpad Edge E420s. I'm using Windows 7 Ultimate x64 with an Intel i5-2410M @2.30GHz. I bought the Ultimate OS retail as an upgrade to the Windows 7 Home edition. Recently, when I put my computer in hibernate or standby, when I turn the computer back on, it causes the BSOD and the computer restarts.I have attached the dump files.Here is the error message I get when the computer finally starts:Windows has recovered from an unexpected shutdown
Problem signature:
Problem Event Name:BlueScreen
OS Version:6.1.7601.2.1.0.256.1
Locale ID:1033
[code]....
View 4 Replies
ADVERTISEMENT
Dec 31, 2012
when my computer goes to sleep after it's on for a while when I move the mouse to get the screen back up it shows the backround no icons or anything to click. Same if I turn it off and turn it back on. I have to turn it off and on many times then go to safe mode and shut down then turn it on again for it to work. Just now I had to turn it on/off 4 times for it to show the icons and task bar. Usually it is left blank with nothing to click having no choice but to turn it off. Norton says no viruses. My computer is HP with windows 7. I bought it in 2011.
View 1 Replies
View Related
Oct 12, 2009
How to Workaround the Wireless Connection Issue in Standby ?
View 0 Replies
View Related
Feb 29, 2012
I've accidentally enlarged my desktop icons, so they became bigger than normal. So how could I turn them back as normal?
View 2 Replies
View Related
Dec 16, 2009
I am going to preface this by saying that this has *nothing* to do with restoring from sleep or hibernate modes. In searching for an answer to this issue, I found way too much related to that.
My problem is simple. Occasionally (~50% of the time) when I turn the monitor back on after shutting it off, it will stay blank and not really turn back on. It makes no difference how long the monitor has been off. After turning it back on, the power light is green, indicating there is a signal, but the screen is black.
Again, the computer has not slept or hibernated. I simply shut off the monitor and later come back to turn it on. The same thing will happen occasionally if Windows shuts the monitor off after the configured time. (I did that last part as a test; I typically do not automatically shut it off.)
Specs:
OS: Windows 7 64-bit
CPU: Intel Core i7 860
MB: Asus P7P55D
Memory: 8GB - Corsair CMX6GX3M2A1600C9 (2 x 2 x 2GB)
Graphics: NVIDIA GeForce 8800 GTS 640MB
Monitor: Chimei CMV 221D
NVIDIA Drivers: 8.17.11.9562 (11/20/2009)
I originally thought it was the OS that was hung. However, I was able to go into the start menu and restart ("Start" -> "Right" -> "Right" -> "R"), so I know the OS was there responding to my commands.
Attempts to fix:
- Restart the computer. This worked.
- Shut off the power to the monitor and turn it back on. This works most of the time.
- Lock and unlock Windows. This works after a few tries.
- Hit CTRL-ALT-DEL followed by ESC. This works after a few tries.
So, I have a fairly simple work around now. So this is only a minor annoyance. Hitting CTRL-ALT-DEL then ESC does seem to work. I don't think it is a placebo because I waited 5 minutes and it did not come back, but after 2 cycles of that, it came back. I think that fixes it because it causes full screen refreshes.
Does anyone have any ideas or has anyone seen this before? The drivers are recent, but I noticed this with the clean-install Windows 7 drivers for this card as well. This is a very clean and very recent install (3 days). I never had this problem with Vista 32-bit, the same graphics card, recent drivers, but different CPU/motherboard/memory.
View 5 Replies
View Related
Jan 22, 2013
I know this thread is a year out of date but my computer experiences the same problem. I will leave it on and after [x] number of minutes it will go into 'standby', but then the BIOS Overheat alarm will sound repeatedly. To clear the problem I have to shut the computer down.
I have recently installed more memory and an additional fan, thinking that this would solve the problem.I've also disabled some startup programs and cancel tasks etc, to try and stop it from over-working but this doesn't seem to solve the problem.Computer never used to be like it until about 3 months ago. It has always done it but it was never a regular/daily occurance.
Spec:
Operating System: Windows 7 x64 SP1
Motherboard: Gigabyte GA-MA770-UD3 (Rev 1)
RAM: 6GB (2x1GB + 2x2GB) DDR2 800MHz/PC2-6400 Memory CL6 1.8V
Processor: AMD Phenom II X3 720 Processor, 2800mHz, 3 cores/3 logical processors.
View 5 Replies
View Related
Dec 4, 2009
It will turn off the monitor but won't go into standby.
View 9 Replies
View Related
Aug 1, 2012
My computer occasionally wakes up from Standby. I have a USB-based KVM switcher providing mouse and keyboard. When I want to put it in Standby, I first switch the switcher to my other computer, then I go into Standby by pressing the power button. When I want to use the computer again, I first switch the switcher back to the computer, then press the power button. Waking up from Standby spontaneously is not a major problem, as it is set to go back to Standby after several minutes. But I'm curious as to what might be happening.
View 4 Replies
View Related
Jul 25, 2011
[BSOD] Get BSOD sometimes when restoring from hibernation...
View 5 Replies
View Related
May 10, 2012
I continue to experience BSODs on my new computer. Every component is new and experienced the same BSODs on my old computer as well.
I turned off hibernation thinking it was the problem, but leaving it idle also causes the same issue. Furthermore, if I leave it on hibernation, the monitor won't turn on after I wake up the computer or there is a BSOD error and reboots.
Attached is what I was told in the instructions to provide. I provided a dxdiag file to give you my system specs as well. Windows 7 Professional 64-bit
View 1 Replies
View Related
Oct 28, 2012
BSOD at many random time
==================================================
Dump File : 102712-27050-01.dmp
Crash Time : 10/27/2012 5:53:42 PM
Bug Check String : BAD_POOL_CALLER
Bug Check Code : 0x000000c2
Parameter 1 : 0x00000007
[code].....
View 2 Replies
View Related
Dec 6, 2011
My computer is several years old, and just a few weeks ago started having a problem waking from standby. Up until now, it had no issues going into and coming out of sleep.Now, whenever it goes to sleep (whether due to inactivity or putting it to sleep manually), it won't wake up. The lights come on, the fans come on, but the monitor stays in standby. I've looked around online and found that many people get a black screen when booting up, i.e. the monitor comes alive and they may get a mouse cursor, but that's not what's happening to me. I don't get a black screen--my screen is never getting a signal from the computer. I have to do a hard reset, after which I get the 'Start Windows Normally' screen.I've tried uninstalling and reinstalling the graphics drivers, changing hybrid sleep settings, using hibernate instead of standby, uninstalling random programs, etc, to no effect. I don't think I had any major windows or driver updates that caused it.
View 1 Replies
View Related
Aug 17, 2010
I simply want to run a program when the computer returns from standby, but I see no options in the scheduler.
View 9 Replies
View Related
Jul 9, 2009
the problem im having is when i leave my computer on for an hour or 2 hours it crashes gos back to the password page saying password locked ? i put my password in but it dosn"t reconize it so i have turn off pc from the power button ? did this on my old win 7 now im on win 7 7264 still got the same problem any ideas ?
View 7 Replies
View Related
Jul 25, 2009
I have a PC that I use as a media center attached to my TV running Windows 7 RC and it worked perfectly until about a week ago when I upgraded my laptop to Windows 7 and placed them both in the same Homegroup. Every since then the Media Center will not enter standby mode either automatically, after 10 minutes as configured or from the MC remote control. To get it to enter standby I have to select "sleep" from the WMC "tasks" menu.
As it only happened since creating the Homegroup I am assuming it is something to do with that, but I may be wrong. The MC PC is set to the "Balanced" power profile.
Any ideas?
View 6 Replies
View Related
May 27, 2012
Windows 7 home premium, 64-bit HP Envy 3D laptop with 8GB memory, no custom hardware
I have configured a backup job which wakes up the laptop at midnight, takes a backup and puts laptop into standby again. All this happens with the laptop lid closed. The power scheme is configured to put laptop into standby when lid is closed.
The resume from standby, backup and suspend after backup is controlled by Windows Home Server (2003) console which is installed on the laptop. I had purchased the HP laptop in October of last year and this job used to work just fine. Sometime in March of this year, the backup stopped working.
After checking the logs and physically observing the laptop at midnight, I found that the laptop resumes from standby at the scheduled time but immediately goes into standby if the lid is closed. The backup fails. Windows event logs indicate that laptop lid close action is putting system into standby.
If the lid is open, then the laptop resumes from standby, stays awake, backup proceeds and laptop goes into standby again.
Here are my problems:
a) Why did the backup work for several months and then stopped working?
b) I have other laptops in the house running Windows 7 home premium on variety of hardware (all HP) and they do not have any issue. Even with the lid closed, they resume from standby, do a backup and go into standby again. The power scheme on all these laptops is set to put laptop into standby when lid is closed. I have verified from physically observing the laptops during backup time.
I have checked all the usual suspects like BIOS updates, driver updates, run sfc, completely deleted the Windows Home Server console from laptop and re-installed after deleting all past backups. Is there some setting that I have overlooked?
View 2 Replies
View Related
May 14, 2012
I built a new computer with:
I7 2600k
MSI Z77-gd55 motherboard
4 gb of ddr3 crucial 1066 ram
1 tb WDEARX Caviar HD (op sys)
1 tb seagate barracuda
Corsair AX750 Gold PSU
Nvidia EVGA gtx 560 2gb
I installed a clean windows 7 installation, Worked fine for a bit and now when I put it into sleep mode it BSOD coming out. In hibernation it requires me to hit the power button to come back and when it does it just comes up with a windows black screen with white lighting saying "windows could not recover the data to load windows" then i need to coose to loose the data and restart or try and load the data (which never works).I have the minidump file that I ran in debugger and and analyzed, which I am pasting here since idk how to upload it;
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:WindowsMinidump�51112-28735-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
[code]....
View 1 Replies
View Related
Aug 16, 2012
I have a home network with two desktop PCs and three laptops, all running Windows 7.I mostly use a desktop PC with Windows 7 Ultimate. I have installed the same version on my girlfriend's laptop. (All other computers use different versions of Windows 7. All 5 copies are legal.)However, when she turns her laptop back on, I get a BSOD on my desktop PC. This doesn't happen when any other PC is turned on.
View 5 Replies
View Related
Apr 13, 2012
I've been getting frequent BSOD after Windows goes to Sleep. I'm getting BAD_SYSTEM_CONFIG_INFO, KERNEL_DATA_INPAGE_ERROR and CRITICAL_OPJECT_TERMINATION errors pretty regularly. I ran chkdsk on my C: drive and got a registry file failure. This is a fairly recent build (<8 months).
Specs:
OS: Windows 7 Home Premium 64bit retail
CPU: Intel Core i7-2600K CPU @ 3.40GHz
Motherboard: ASUS P8P67 Pro
Memory: PNY 4GB DDR3 PC3-10666; PNY 2x@GB DDR3 PC3-10666
Graphic Card: NVIDIA GeForce GTS 250
Monitor(s) Displays: Dell S199WFP; Generic PnP Monitor
Screen Resolution: 1440 x 900; 1280 x 1024
Hard Drives:
Seagate 1TB SATA (ST3100003 40AS SCSI)
Western Digital Caviar Green 2TB, 32 MB Cache (WDC WD20 EADS-00R6B0 SCSI)
View 7 Replies
View Related
Dec 8, 2012
When I put my computer in hibernation, sometimes when I wake it, it hangs at the user select screen, or it just shows a black screen. Sometimes I can reset the computer after it has hanged, and try again resuming from hibernation, and many times it will work after a couple of tries. Other times after resetting I won't get the prompt to try again with resuming (the other option is to delete hibernation data and reboot the system) but I will get the usual screen that says that Windows was not shut down correctly (with all the options for safe mode, etc). If I cannot resume and I get the screen with safe mode and all the other crap, I finally log in I get a notice that there was a critical error, in the details I see BlueScreen and other data, but I actually never get a blue screen. In the dump folder, there are no dmp files related to the hibernation hanging.
Anyway, when it happens, I see several Event 18 WHEA-Logger in the event viewer, about 6 of them every time.What's weird though, is that I literally have NO problems with this computer other than this. The only times it hangs is when I resume it from hibernation. I can play games or run stress tests with or without overclock and the system is 100% stable. But there is some problem that prevents it from resuming from hibernation correctly, so every time I use it is basically a gamble because it has like 50% chance of working.I tried EVERY SINGLE solution I found with google related to hibernation problems, and it's still there. I even formatted and reinstalled Windows from scratch, and it's still there. I'm positive I updated every single driver for every hardware I have and nope, no solution.I know the WHEA error is related to the hardware but like I said, everything works PERFECTLY once the system starts up properly, or when it resumes from hibernation properly. [code]
View 6 Replies
View Related
Jan 10, 2013
My laptop was working fine until I replaced the 4GB with 2 x 4GB about 2 months ago. I also installed iCloud the following day. I was getting numerous BSODs during the day and so uninstalled iCloud (using their uninstaller) but was still getting BSOD. I ran some memory tests and found one of the DIMMs to be faulty, got that replaced and now no more BSOD during the day. I do however get the occasional BSOD when I try to Hibernate manually or the laptop Hibernates itself and I am struggling to troubleshoot the cause.
BlueScreenView is telling me that there is a "DRIVER_POWER_STATE_FAILURE" from ntoskrnl.exe with "ntoskrnl.exe+1040b" in the Address in Stack. I've checked the event logs but maybe I'm not reading it properly but I really would like to know what the system is doing just before it tries to go into Hibernation. Personally, I think it may have to do with iCloud or some form of network syncage but I could be completely wrong.
View 5 Replies
View Related
Jun 13, 2012
Recently purchased a refurbished PC (last week) and have come across my first BSOD. I don't know the code of the BSOD. Basically what happened is, I was using Sony Vegas (a video editing software), put the computer to sleep (for around 10mins i think) and when I turned it back on I was instantly met with the BSOD. I really don't have any more info to divulge than that. I've been told my PSU is underpowered for this machine (405w) and I am currently in the process of purchasing a 650w PSU. Just throwing that out there, not sure if that has anything to do with the BSOD.
Specs:
Processor: Intel Core i7-2600
Operating System: Windows 7 Home Premium 64bit
RAM: 8 GB
View 8 Replies
View Related
May 28, 2011
My computer wakes from hibernation.I�m using windows 7 x64. My BIOS doesn�t support any configuration settings about wake, and the LAN device driver states that it doesn�t support wake on LAN.It�s a Dell Lattitude laptop, about 2 years old.No events are relevant.This started about 6 months ago when I went out and updated all my drivers, so some driver is apparently having fun. I had already run for long enough when it started that I didn�t want to roll back, although I have tried earlier versions of the LAN, WAN and WLAN drivers. None of them have an option for disabling wake on LAN that can be checked.
C:>powercfg -lastwake
Wake History Count - 1
Wake History [0]
Wake Source Count � 0
C:>powercfg -devicequery wake_armed
gives no output.
View 4 Replies
View Related
Dec 4, 2012
My new HP desktop is in hibernation mode and the monitor displays a message that says it can't come out of hibernation. What can I do?
View 3 Replies
View Related
Dec 21, 2012
I just bought a NIB (New In Box) Windows 7 computer and I have run into a problem I have not seen and don't know what to do with. I keep my computer password protected due to financial and other sensitive information I have on it. Whenever I am away for an extended period I lock my computer using the Windows Key - L combination.If I am only away for short periods of time everything is fine but if I am away from my computer for an extended period and I try to wake my computer up it won't come out of hibernation and I have to use the power switch to shut it down and restart it and of course I get the "Windows did not shut down normally" screen.I like to leave my computer on for convenience and to get Windows updates but I now hesitate to do this if I am going to have to deal with it not coming out of hibernation every time I am away for a long period. I suppose I could always leave it on but this uses a lot of power as well as wear and tear on moving parts.
View 2 Replies
View Related
Sep 2, 2010
For some reason my computer's just not turning on. The motherboard light is on, showing the PSU is working. But when I turn on the PC it just doesn't boot or even start at all.
View 5 Replies
View Related
Jul 13, 2011
When I press the power button on my computer, everything lights up briefly, then turns and then continuously trys to start about every five seconds.
View 14 Replies
View Related
Nov 28, 2011
Here's my problem:I have a netbook (HP mini 311) that came with Windows XP, and then I've installed windows 7 on it.When the computer goes to hibernation either because the battery is getting too low or that I close the lid (as I choosed these in the power options) , the computer won't successfully boot up to the "Resuming windows" screen. And what I should do is to turn it on and off 3 times, and so it starts normally (to resume windMore notes: at first boot screen (where the hp logo is) , at the bottom right of it, there's usually a "Press esc for startup options" text, that doesn't appear by the 3 first boot ups tries.
View 2 Replies
View Related
Mar 26, 2011
Is it possible to wake my computer from hibernation to stream content to, lets say, an Xbox 360? Then after its done streaming put the computer back to sleep?
View 3 Replies
View Related
Dec 16, 2012
Today I have been experiencing some problems with my computer with trying to turn it on and I am noticing 3 things that are unusual
First of all, I am noticing that when it turns on, there is no where for me to log-in. The blue background shows up like normal and I have a cursor to move around so it is not frozen-just no user image and nowhere to put in my password. Also, I am noticing that the size of everything on my screen (what actually shows up), is larger than usual, including the cursor which is much larger than normal.The last thing that I am noticing when turning on my computer is that if I leave my blank screen sit for a minute or two, it will automatically start to restore the system, so I don't know why it would be doing this if i never made a command for it.
View 2 Replies
View Related
Sep 13, 2009
Just wondering if anyone has any solutions to this other than a complete shutdown.
I place my computer in either stand by or hibernate and for some reason in the early ours of the morning it will turn itself on and sit on the login screen.
I think it must be some kind of back system operation which is sheduled but I have no idea what or where to find it.
Any ideas?
View 9 Replies
View Related
