when I resize windows I get a considerable CPU hit, anywhere from 35% to 70%. My processor and GPU are decent so I'm not sure why this would happen, but it sometimes causes audio crackles and other glitches. I am on the Nvidia 260.99 drivers.
View 7 RepliesI just installed windows 7 ultimate sp1 - Like the title says I'm seeing 35% cpu usage with nothing going on. I googled around and ran traces to see which driver it was, turned out the ahci driver was doing it. The USB driver showed similarly high latency but that can be delt with later. Most forums recommend upgrading your drivers but this problem has stayed constant both with microsoft's stock drivers for everything and after running windows built in search for drivers even after I manually grabbed the latest drivers for everything. url...BIOS is up to date4 GB RAM - Corsair something or otherEVGA Geforce 8800 GT450W psu1 DVD burner (sata)5 hard drives (sata) plugged into all but the first sata port because that caused nothing but headaches for me. Update - switching from AHCI to IDE in BIOS fixed the problem.
View 3 Replies View RelatedI have windows 7 home premium running on my compaq (HP) presario laptop. When i select a photo for the wallpaper it stretches it out even if the photo is a potrait one, which means it cuts off heads of people and so on. I have tried going into control panel> appearance and personalisation> personalisation> desktop background> and tried to change the picture position to fit or centre or anything other then stretch but it wont change anything, the wallpaper stays the same. Anyone have any ideas? i have a feeling it may be a problem with windows or something. My dad is running windows 7 home premium on his home pc and i can change the wallpaper settings on it no problem.
View 6 Replies View Relatedhave a software like windows power toys for XP image resizer 32 bit only available. It there ant such for windows 7 64 bit?
View 3 Replies View RelatedI am using Microsoft Outlook and I want to reduce the size of a photo and email it but when i right clic on a photo file to email there is no email selection for me to select therefore i cannot reduce the picture size.
[code]...
As a personal preference, I run with the taskbar positioned on the left side of the screen with autohide set. In all previous versions of Windows, when I set the width of the taskbar (usually about 1 inch, so I can see more than just the icon for each task and the quick launch area is three or four icons wide) it stays that way, whether the taskbar is locked or unlocked. With Windows 7, after I set the width, any time the system restarts, whether from Hibernation, reboot, initial startup, what-ever - the taskbar is back to the narrowest setting.
View 9 Replies View RelatedI've 4 primary partitions on my drive. I've resized the system partition (win 7) and the second one with gparted. No problem with the first but the second is gone. Disk management shows it but no way to format or change the drive letter.
View 6 Replies View RelatedI have upgraded my PC from Windows XP on an intel Q6600 to WIndows 7 on an AMD 1090t processor. I have my new Hard drive (C) with windows 7 and my old hard drive (D) has Windows XP with all of my files.I would like to image the old drive and store it as a "just in case" measure. The old drive has a 500GB capacity with only about 150GB used. When I image the drive the image file is ~500GB.
1. If I resize the old hard drive using "Windows 7 Disk Management" will I still be able to put that drive in my old computer and have it boot up?
2. Will the image file be only the size of the new partition?
I have just purchased a new computer which came with Windows 7 home premium 64bit preinstalled with a 1T hard drive. I want to partition the available 931g hard drive into two partitions. I followed the instructions in Disk Management and shrunk the 931g partition by creating a 459.04g partition (blue line at top) and another simple partition of 451.38g which says it is unallocated and has a black line at the top.
HOW do I make the unallocated partition active (I have followed the new partition wizard but end up with a message box which eventually tells me no.) I have repartitioned hard drives in the distant past but used a program for that purpose which I no longer have.
I have a System partition which is running out of space. Using GParted I took 1GB from the Data partition and made it unallocated. Now, how do I add that to the System partition?
View 6 Replies View RelatedI have two monitors, each with a large screen. I often move a window from one to the other. If I place it near the top of the screen, Windows happily expands it to fill the whole screen, something I'd rather not have happen.How do I disable this function?
View 3 Replies View RelatedI want to shrink my C partition with Windows 7 installed, but Windows 7 partition manager wont shrink it past 200GB because of unmovable files. I dont know what files those are though.
If I use Partition Wizard to shrink the size to 100GB, is it safe to resize when there are unmovable files? Will this damage my system?
Why can a third party program shrink the partition, but Windows cant?
I installed windows seven beta a few weeks ago. I made the partition too small at the time and just recently used a live ubuntu cd's partition editor to add more space to the windows seven partition.
When I booted into vista it automatically check the drive and restarted with no problems.
When I attempted to boot into seven it gave me an error screen saying I need to reinstall my O.S.
I have lost my cd for the beta build. Is their anyway I could get a copy of the iso from Microsoft again? Or would it be easier to upgrade to the release candidate? Or can I posiblely repair without the cd (when I try to acess the extra features of f8 on the boot screen I get the same error as trying to load the os)?
I'm running Windows 7 Home premium 64 bit Every time I bootup my icons have changed size to medium and are shifted to the left of my screen. The auto arrange in un checked so i'm really stuck
View 2 Replies View Relatedduring a clean install, after expanding and updating and it says "completing..." it resized the screen and then it freezes forever.
I have tried dozens of different ways to install windows7, from reinstall a clean install of vista and then just trying to upgrade, to many clean installs on windows 7.
Not only i cant load Windows7, but when i installed vista again, I cant get the media center to recognize my internal tv tuner.
I had an empty 70 GB partition on the left of my computer and a 230 GB on the right side but I wanted to combine them. Windows was on the 230 GB partition. I booted GParted and combined them, it copied everything from the 230 GB partition over and resized it, it took a few hours.I assumed after it wouldn't boot and all I would have to do is pop in my Windows 7 install disc and go through the repair setup. At first I ran startup repair and it would say it found a problem, and I rebooted and still nothing.. After the bios loads and it lists my DVD drives I just get a cursor _ blinking, nothing else.. No BOOTMGR missing.Odd I thought, so I ran repair again, and again it found another problem. I did this several times before it said it could not detect a problem but it still would do the same thing.I opened the cmd prompt and issued the following commands
bootrec /fixmbr
bootrec /fixboot
bootrec /rebuildocd
I tried installing a second copy of Windows 7 on a 10 GB partition on the end, it went successfully but still blinking cursor. Theres a 54 MB partition at the beginning of type Primary, the main windows one is System and the test windows 7 partition is Primary as well. I thought the first one was usually 100 MB but maybe I am wrong.Still I am stuck with a blinking cursor?
I was going to partition my hdd it had 72gb free and it has 160gb so i partitioning the hard drive (i used partition wizard) i always use that program.After it finished it reboot then it got stuck at bios it would not load any cd or dvd it will just hang there.There it says two options "Press F1 to run setup" i press it and says "Entering Setup..." and nothing happens and "Press ESC for BBS POPUP menu i press it and says "Boot selection popup menu has been selected"This is what the screen says:
AMIBIOS(C) American Megatrends, Inc.
BIOS Date: 02/02/05 13:04:54 Ver: 08.00.10
Copyright 2005 by Hewlett-Packard Company
[code].....
I was trying to resize my partition but it just stopped and got stuck at "Ultra DMA Mode-5, S.M.A.R.T. Capable and Status OK". As i mentioned above I tried to boot of a cd/dvd but it wouldnt work i have 2 other hard drives and the work perfect.
I'm wanting to install Windows 7 as a dual boot alongside my existing XP set up and have been trying to follow the excellent guide at Dual Boot Installation with Windows 7 and XP
But I'm stuck at resizing the existing partition as described at Partition or Volume - Shrink
I get as far as the command prompt and selecting the drive, but as soon as I type "shrink querymax" or "shrink desired=15360" or even just "shrink" I get the message
"Diskpart has encountered an error: This service cannot be started in safe mode"
Now I can't see any way of getting a command prompt WITHOUT starting in safe mode.
There was originally just one HDD and I wanted all my "Media" to be in one partition and then Programme Files etc. in another (being C). This was just so that I could copy the entire 'Drive' I had created making moving videos and photos around easier.So I used the built in disk partition manager and created some unallocated space, then called that space Drive (A) - But now that (A) drive is full and I want to add an additional 40Gb to it from the original C, but I the "Extend Volume" option is greyed out on the (A) drive even with the 40Gb as Unallocated.
View 3 Replies View RelatedAfter I used "Acronis Disk Director" in a HirenBoot CD to cut some space from my D drive to my C drive (boot drive), I've got this "Windows is checking the D drive" then "Corrupted master file table. Checkdisk is aborted" on my D drive. After doing some homework, I've tried corrected it by using testdisk's Fix MFT function but "Both of the MFT files are corrupted. Can't fix". I did not back up the whole partition. I do not really want to buy $60 + commercial software that TestDisk recommends just to fix this possibly once-in-a-lifetime issue. However, if recovery softwares is the only option left, then I have to use them.
View 1 Replies View RelatedSince Jan-Feb of this year I have encountered the following issue while trying to play games on my laptop.
Abnormally High CPU Usage
Extremely low FPS - After 5-20 Mins of play.
Extremely High latency to servers - from 300 - 900 after 5 - 20 mins of play.
The thing is all of these started 1 year after I been using this laptop, after a full year of everything running flawlessly all these issues kicked in after I performed a clean install in Jan., I even performed one in Feb. and one 3 weeks ago
Here are my specs:
OS Name Microsoft Windows 7 Home Premium
Version 6.1.7600 Build 7600
System Manufacturer Dell Inc.
System Model Studio 1558
Processor Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz, 2400 Mhz, 2 Core(s), 4 Logical Processor(s)
Installed Physical Memory (RAM) 4.00 GB
Name ATI Mobility Radeon HD 5400 Series
Adapter Description ATI Mobility Radeon HD 5400 Series
Adapter RAM 1.00 GB (1,073,741,824 bytes)
Ok well i just bought this computer and i was resizing the partion and i turned off mycomputer, i restarted my computer and got the same error.I put in the windows vista restore disc and nothing at all happend even whe i ran with cdrom.
View 9 Replies View RelatedIf I click on the maximize window, I will get the full screen that I want but the half screen will reappear in later use (during the same online session).
View 1 Replies View RelatedFont was way too small in my webmail. I set resolution at 200 on my little Acer notebook with Windows 7. It made everything bigger except for the email I was trying to enlarge for easier reading.. Now I can't find a way to get back to lower resolution. Control panel is so expanded that the screen will not show needed settings.
View 7 Replies View RelatedAs I was working my laptop display reset itself to 800x600. I went into resolution to reset it, the highest option is 1024x768, which is still not what it was before.It's like looking at my monitor with the wrong glasses on! t 1900x1200 would be available and that one resolution would be 'recommended' although nothing like that shows on my machine
View 23 Replies View RelatedWindows 7 resolution can't go as high as before
View 10 Replies View RelatedI set up windows few times but still my windows 7 taking huge loading time. Is it hardware problem or software?
View 1 Replies View RelatedMy Windows is doing something when I do not use it. The disk makes a lot of noise (r/w) but as soon as I touch the mouse or keyboard it stops.What can be the reason ?
View 3 Replies View Relatedso yesterday at a lan party we decided to upgrade my mates ancient PC to Windows 7 from XP and the computer should have the specs for it and Windows 7 itself was/is running smooth. The first time I put up Windows Home Premium and installed the normal programs. I installed steam and downloaded Counter-Strike, and told my m8 to go play on a local server. And his ping going crazy. My MS is about 10-20 on a local server, but his jumps from 50-200ms, which is unbearable. Well after that we decided to back XP and went off to play, and now it was working perfectly. And the day after we put up a new Windows 7 Ultimate 86x. And again the same problem persists.
View 1 Replies View RelatedI have a very annoying problem. If the CPU utilization is high on my laptop, windows 7 goes into hibernate. This happens, for example, if I run a virus program or run some applications that use too much CPU.Right after it wakes up from hibernate, again it goes into hibernate. This repeats again and again.
View 4 Replies View RelatedI have a problem but i bought a new Dell laptop with the following specifications:
Dell Inspiron 15R
core i7 3.1GHz Turbo, 6MB cache
16GB DDR3 RAM
Geforce Gt525 1GB Graphics
Now the problem is that when the system is ideal it takes around 2.5 GB RAM usage. Even there is no running applications. Also I noticed that it's performance not that much. Is it normal?