Hard Drive Partitions - Disk Managment
Dec 3, 2009
I have just installed Windows 7 on a new hard drive.
If i click on My Computer i see a C drive (Windows 7) with just the one partition as i expected.
But if i right click on My Computer and go to manage then go to disk managment is see that the hard drive with Windows 7 on has two partitions one called System Reserved and is 100Mb and then the C Drive with Windows 7 on.
View 3 Replies
ADVERTISEMENT
Sep 2, 2012
There was originally just one HDD and I wanted all my "Media" to be in one partition and then Programme Files etc. in another (being C). This was just so that I could copy the entire 'Drive' I had created making moving videos and photos around easier.So I used the built in disk partition manager and created some unallocated space, then called that space Drive (A) - But now that (A) drive is full and I want to add an additional 40Gb to it from the original C, but I the "Extend Volume" option is greyed out on the (A) drive even with the 40Gb as Unallocated.
View 3 Replies
View Related
Dec 23, 2012
My external HDD (A WD 2TB My Book) just up and quit on me while I was using it today. My computer was no longer recognizing it, and I could no longer access my files. My computer still acknowledges it under drivers however, and it claims all the drivers are up to date and that the device is working properly. I tried going into to Disk Management to see if I could do anything from there, but it isn't even recognized there. There is however a Disk 1 but it is unknown and not initialized. I'm assuming this is my external HDD since its the only external disk I've used on my computer. When I tried to initialize it, it failed due to an I/O device error although the error prompt didn't refer to any specific problem.
View 2 Replies
View Related
Jan 15, 2013
I want install win 8 or 7 using diskmgment with out boot
View 3 Replies
View Related
Sep 4, 2010
Partitions labels in Windows Explorer are different than Disk Management ! When I Rename any Partition labels nothing Change !
View 9 Replies
View Related
Dec 1, 2012
After searching the entirety of the internet I have come here to try to resolve my problem. I have a Seagate barracuda 1.5tb 3.5" 7200rpm hard drive which i was previously using to run windows server 2008. I am now trying to use it as an external hard drive for my laptop, however the laptop does not seem to recognize it. I tried using two different cases, three different usb ports, and i confirmed that everything was properly plugged in and powered on. The hard drive does not appear in disk manager, my computer, or the BIOS.
View 3 Replies
View Related
Dec 6, 2012
I'm here with 8 hd's all blocked, formats need them but I'm not getting or creating a partition because they are blocked, HDD Unlock saw the program but is expensive and is paid
View 1 Replies
View Related
Jul 12, 2010
I have changed the permissions for the access of files and folders in the security tab of given in the properties of the Hard Disk Partition.Now I other users of the same computer cannot access the drive or make changes there. I tried hard to solve the problem but the output is "Access Denied". Any way to make this permissions to its default(or The normal state which it was). My OS is Windows 7 Ultimate x64
View 8 Replies
View Related
Apr 3, 2012
how many partions are better for 500 gb hard drive
View 9 Replies
View Related
Mar 14, 2011
I just started having an issue on a clean install of Windows 7 SP1 build 7601.The icons for the W & Z partitions is suddenly showing as a broken link.I have tried right clicking on each partition > properties > customize > restore default folder picture and there is no change for either to update the icon.
View 2 Replies
View Related
Oct 30, 2012
Okay, so I go to do a fresh install of Windows 7 on my machine as I have sveral times. I booted from the Win 7 cd and it came to the hard drive selection page. Here's where the trouble started. I have two identical 2TB hard drives and a 3TB drive in my machine. My gut told me to unhook my 2TB drive that I use for photos and music, the other 2TB is my data (C) drive. I said to myself, "Self, you have done this so many times, no problem". Well, problem. It deleted the partitions on my data drive. It never formatted the drive though. After the first reboot, my (C) drive booted and I knew that I was in a heap of trouble.
View 3 Replies
View Related
Jul 25, 2010
I had installed Windows 7 on one partition and it went bad for some unknow reason so I created another clean partion and installed win 7 on it. I also added partion for music, pictures, etc. Now the question is how do I get rid of the first version since it was giving me the BSOD. It boots as though I have dual boot but the second one listed it the one I would like to get rid of leaving user files intact.
View 3 Replies
View Related
Feb 25, 2010
When upgraded from Vista to Windows 7 , one of my partitions is not visible. This stores lot of photo-shop tutorials , songs , videos and ebooks.
Will I ever be able to get them back ?
View 5 Replies
View Related
Jan 13, 2009
I installed Windows 7 64-bit on my computer which has only 1 hard drive (640GB). I partitioned it using XP to have 4 partitions: 1) XP Partition 2) Linux Partition 3) Linux Swap 4) Windows 7.The problem is Windows 7 cannot detect any partition besides it's own partition, so I cannot access any of my data from the other partitions (XP and ubuntu --- I don't care about ubuntu but I need the data on the XP partition). I know the other partitions exist since I can access XP still, and I believe XP can detect all 4 partitions.I went to start->menu then searched for partition and selected "Create and format hard disk partitions" and it actually detected all the partitions. The problem was the other partitions did not have drive letters associated with them.So I just right clicked and changed the drive letters.
View 4 Replies
View Related
Oct 22, 2011
I have a desktop PC with confused partitions (see image below).
1) C: 62.50 GB NTFS (3 GB free speace, about 2%, that's a problem)
2) 8 MB unallocated
3) "Add to C2" 66 MB NTFS
4) 39.97 GB Free space
5) D: "Data" 195.54 GB NTFS
I'd like to combine 1, 2, 3, and 4 into one partition. And then repartition in a way that allows me to install Linux (two ext3 partitions? one for swap disk?).How can I do that? Is that complicated with GParted?
View 1 Replies
View Related
Nov 25, 2012
i just bought a new computer running windows 7 home edition. my question is, can windows 7 make an entire image of my hard drive including (and this important) the recovery partition? If It can can anyone please tell me how. i need to have a complete backup of my hard drive in case of hard drive failure.
View 1 Replies
View Related
Dec 12, 2012
I dont mind C: being exposed but I'd like my data to be accessed only by me. D: is where I have some data. D: and C: are the same physical disk. E: and F: are USB Storage drives and also have my data. How can I do this?
View 6 Replies
View Related
Jan 31, 2013
I have a friends Samsung n150 i have just formatted the hard drive partitions with killdisc. I would like to make the hard drive have just one partition maybe two. It is currently split up into 3 or 4 partitions. Is there software i can put onto a flash stick to do this ? Or how would i go about doing this ?Reason being is because i dont want to put windows 7 onto the first partition and have loads of memory left in another partition not being used.
View 3 Replies
View Related
Feb 2, 2013
How to get data back from a formatted hard drive with new partitions
View 3 Replies
View Related
Nov 13, 2012
Low disk space, Can transfer data on D drive to an external hard drive
View 5 Replies
View Related
Jun 25, 2011
I can see my external hard drive in device manager, but not in my comp
View 3 Replies
View Related
Aug 17, 2011
Last night I noticed it had turned the bar to red, and said I had only 12 GB left of 135 GB. Im not into video, music, games or anything else I know of that would use that much space. I surf the web, and keep some scanned and some text documents. A few months ago I carefully installed Windows 7, instead of Vista which my PC came with. No problems. I just now deleted the old Windows stuff, and that freed up 47 GB, so thats good. I suspect that my hard drive was partitioned during that installation of Windows 7, and I dont know that that is necessary. Can that be undone?
View 5 Replies
View Related
Apr 19, 2011
I have an enclosure with my hard drive in it and connected it to the computer it was not found and i think its because its disabled i go to computer manage disk managemtent and recovery disk,i click properties click on my hard drive (toshiba...) click enable, then i click next and it says windows was not able to enable the hard drive
View 1 Replies
View Related
Mar 30, 2012
I cant access my hard disk drive, when im trying to open it, my laptop responses that that there is no permission from administrator, there is a logo on my hard disk drive that the hard disk is shared..
View 2 Replies
View Related
Aug 14, 2010
My Drive E just lost from my computer! I don't know how did it happen. I try to search through google but I can't find a solution.
View 9 Replies
View Related
Dec 22, 2011
I am running windows 7 64 bit, on an eMachines lap top, I have purchased an external HDD and now I am trying to create a perfect copy of my system. I used DriveImage XML but it failed. I have used this program in the past with great success on a different computer running WindowsXP.The failure I get is "failed to lock drive". I've tried skipping the lock drive option and going straight to shadow copy; same problem.I can only assume the failure to lock drive is based on permissions and files being in use. So I think I need to attempt this without loading windows. Is there anyway of running a "free" drive cloning program from a DVD or USB Flash drive without booting into Windows?I would just bit torrent a win7 OS, install it on my external, and run the program from their, but I don't want to have to resort to law breaking, and I have never run linux.
Also I tried using a "backup" feature on Paragon Partition Manager, it did "backup" the system, but it didn't clone the drive. All the backup files are written in directories such as "C:/archive/" and thus I assume there is no way of booting into a system written that way. I assume it's like windows system restore, and what I need is a bootable image of my primary drive.Oh and I should clarify, that it's not my external drive that fails to lock; the external HDD has been formatted, partitioned, and can read and write data just fine, and has way more than enough room to copy the HDD in my lap top.Also, the HDD on my lap top has 1 primary partition, with two logical partitions. I have no idea what the logical partitions are for and if that could be causing the problem.
View 8 Replies
View Related
May 27, 2011
I've an all-in-one computer but would like to mirror the hard drive with an external usb drive, main hd 1T internal and 2T external partitioned into 2x1T one for mirror and other for data. Is this possable, running 7 Ultimate.
View 4 Replies
View Related
Sep 22, 2011
i bought a laptop and it had one drive C(OS) with 450 gb. i want the c - drive to be partitioned further 2 drives(D and E). will i able to do that ,if so please send me steps or screen shots. i followed the below steps, i partitoned using Shrink volume in Disk management and i aplit the drive as
View 7 Replies
View Related
Feb 26, 2012
i bought a samsung 1000 gb hdd. model:HD103SJ (1000GB/7200rpm/32M) it was my primary hdd. when i bought it, had 938GB total space.I formatted n partitioned it couple times... last time when i broke all partition then it showed total 931.
View 2 Replies
View Related
Apr 14, 2012
This is kinda long and I've fixed it, but could use your input. So after waking up, my parents informed me that the computer was shutting down randomly. I turned it on and "a disk error occurred press ctrl+alt+del to restart " appeared. It's a Sata hard drive so I checked the cables to make sure they were plugged in correctly and they were, and then I tried connecting it to another computer with that computers cables and that didn't work either. My parents not wanting to buy one online, decided to just go to bestbuy and buy one there, since we already had the Windows 7 Disk at home. I formatted it, partitioned it, and installed Windows 7 Home Premium on it and everything worked. I decided to connect the Hard drive that didn't work while the computer was still on, and it immediately started downloading the drivers it needed and up popped all the hard drive. I'm going to start transferring all the important things like music,videos and games, and after, all I can see are the following 3 things; after getting all the data we want off it, should I reinstall windows to see if my other computer will recognize it (Even though it couldn't before), format it and just use it as extra data (though since it already couldn't boot up, the ability to keep data on it may fail in a couple of days/weeks) or just put it away and not use it at all.
View 3 Replies
View Related
Nov 6, 2012
My friend's laptop (Acer Aspire One 722 - Windows 7 x64) has been shut down after opening an email and Windows never started up again. When you attempt to start up the windows, it stays the black screen and says "No bootable Device Found"! I inserted Windows Live Disk and loaded it (Windows XP Mini - Golden Edition). When I went to "My Computer", it did not show any local drive. I went to "Disk Management" and in there, there was also no unallocated or allocated space. I even removed the HDD and plugged it back in. No thing happened. Then I removed the RAM card and inserted it back. Again, nothing happened! By the way, HDD had movements when laptop was on (I had removed the beneath panel).I inserted Windows 7 Disk to install a fresh Windows 7. But when you get to the part where it asks you to choose the partition to install the operating Sustem, it shows one unallocated drive with 0 (Zero) capacity! The options to Delete and format are disable. Only the option "New" is active and it gives you (0) bite to partition!
View 5 Replies
View Related