Deleted The Partitions Can't Install Windows 7?
Feb 10, 2013
I have a little problem.I have windows XP and I wanted to install Windows 7.All went well till the part where I deleted the existing partitions and created new ones.The problem is after this step the installation failed and an error message appeared :,,Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart the installation.
View 1 Replies
ADVERTISEMENT
Jan 10, 2013
I have just deleted all partitions on my laptop hard drive to install windows 7 and messed something up...I know cannot install windows 7 as it just sticks at the setup is starting screen..can I put the drive in my pc (running xp) and save it somehow ? I have nothing on the laptop to repair or anything as far as I can see ...
View 12 Replies
View Related
Apr 16, 2011
I believe my 2tb external USB 3.0 hard drive has been corrupted (just the filesystem) and after trying to create a backup of my 200gb Steam games collection, the computer crashed halfway through. The culprit is the dying drive my games were on (hence my attempt to move them to the external for backup). I rebooted to only find that my hard drive was corrupt. The partitions were fine except it read as RAW not HFS+ (running Windows 7 64-bit and Macdrive).I attempted to recover data using gparted live cd and testdisk. Unfortunately I'm now left with no partitions and a "bare" drive according to Windows. I have not written any data ontop of the drive other than attempting to recover the partition map. I assume my files are intact.I have 1.2tb worth of data stored on the drive and this is important because one of the files contains every single file from my iMac before i wiped it and sold it. This file is a direct file copy (.dmg compressed) of that computer. Planning to restore to a new mac once I buy one.
Included is all of my photography work, music, movies, and other various precious files that make up my digital life. most of it irreplaceable.Is it possible to restore the partition map from Windows or bootable disc?
View 12 Replies
View Related
Dec 23, 2012
I wanted to install a fresh installation of windows 7 on my computer so I decided to load up my boot disc.
1. I deleted my partitions until I had a maximum of 233gb of free space.
2. I created a new partition from the free space. Windows setup suggested to make a primary partition of 100 mb.
3. System created two new partitions. One is primary partition (233 gb), the other is the system partition (100 mb)
4. Proceeded to install windows on the new partition created.
5. Copying windows files went from 0% to 100% instantly
6. Stuck at Expanding windows files at 0%.
7. Restarted my computer to boot up windows to see what's wrong.
8. Windows boot manager is missing, only thing I can do is reinstall windows but I can't
9. Can't do a startup repair cause it fails.
10. Did a cmd command for bootrec.exe /FixMbr and bootrec.exe /Fixboot and both operations are successful. However, still can't load up windows desktop.
Problem: I deleted my partitions and created new ones but I can't install windows onto the partition because the screen is stuck at expanding windows files at 0%. I got an error: 0x80070017. Windows cannot install required files. The file may be corrupt or missing. I also can't load into windows desktop because bootmanager is missing.
View 7 Replies
View Related
Feb 16, 2011
I Upgraded My Windows7 Starter To Ultimate Recently And Everything Was Going Fine, But I Wasn't Happy With The Disk Space Because I Had Ubuntu As Second OS And I Wanted More Space For Win7. ( Ubuntu Was In The same Partition As Win7 C: ). I Searched For Ways Of Increasing The Size Of The Partition But I Didn't Understood Them So I Deleted Ubuntu. The Space Wasn't Recovered (Unallocated Space) So I Still Searched For Ways Of Making The Partition Size Bigger And i Found a Way That Said If You Right Clicked The Gray Square Of Disk Utility And Click a Phrase That i Don't Remember You Can Show the "Resize" Option Of the Partition.i Did That and i Received a Notification Dialog That Said That Said That If i Do That All The Partitions (OS's, Files, And Drivers) Would Be Deleted And I Like A DUMB Clicked "Ok" At Next Restart There Was No Boot Manager, The Boot Just Loaded Again And Again. So I Installed Ubuntu Using a Bootable USB (Current OS) And There Was No "Install Alongside Other OS" Option. I Tried To Run Windows 7 Setup Again Using a Bootable USB, But I Get Stuck at The Part That You Must Select The Drivers Needed So Windows Could Read The Partitions. I Have The CD With The Drivers But i Have a Dell Inspiron Mini 1012 Netbook With No CD Drive So i Downloaded All The Drivers That the Factory Installs From Dell.com And Saved It on A USB But the Windows 7 Setup Doesn't Recognize The Drivers, It Only Recognize The USB But Not It Contents(Drivers).I Want To Keep Using Windows 7 And All Programs i Need Windows But It Seems Like Ubuntu Is My Only Option.
View 9 Replies
View Related
Dec 15, 2010
While installing Fedora 12, it deleted all the 5 partitions i had currently i have only 1 partition since fedora messed everything up all the data has been lost and m not even able to logon to Fedora i have deleted fedora and m in the process of installing XP during the installation of XP, i deleted the one partition i had and then formatted it using the NTFS system so that i cud install XP. is there any way i cud recover all the data i had?.i had 5 partitions with c,d,e,f and z drive total 500 GB..
View 1 Replies
View Related
May 20, 2012
Last night one of my friends was "guiding" me through an installation for Ubuntu to a flash drive. I was doing it on my current computer. I removed some partitions from the installation thinking it would just remove them from the list, I then tried to install it on the flash drive. (I also changed some of the NTFS FAT 32's around and stuff, But i don't know what that means)It then brought me to a black screen with a blinking underscore.After doing everything below, it now says Missing operating system.So I might have made things worse.I have tried the recovery Cd which I burned off of another windows7 computer, I tried bootrec.exe as well.I'm not entirely sure what to do at this point. I am currently using the same computer, but on the trail version - "try ubuntu" of ubuntu. All of my files seem to be intact. Also, when I ran one of the recovery options it had a box for listed OS's and none displayed, it also said select drivers to install to disk and brought me to system32. (I had no idea what to look at, at that point)I also did.Nothing seems to be working and I'm out of ideas and running short on time to get my work done.
View 8 Replies
View Related
Oct 30, 2012
Okay, so I go to do a fresh install of Windows 7 on my machine as I have sveral times. I booted from the Win 7 cd and it came to the hard drive selection page. Here's where the trouble started. I have two identical 2TB hard drives and a 3TB drive in my machine. My gut told me to unhook my 2TB drive that I use for photos and music, the other 2TB is my data (C) drive. I said to myself, "Self, you have done this so many times, no problem". Well, problem. It deleted the partitions on my data drive. It never formatted the drive though. After the first reboot, my (C) drive booted and I knew that I was in a heap of trouble.
View 3 Replies
View Related
May 3, 2010
My machine came with Windows7 pre-installed and no installation DVD, instead there is a separate partition labelled WINRE (5GB) for recovery purposes (I guess at least).Now I messed up my whole system and deleted all partitions but this recovery one (setting up a dual boot). I also have the System Recovery Disk and would anybody know if I can reinstall Windows 7 with these two?
View 9 Replies
View Related
Jul 4, 2010
I recently installed Ubuntu 10.04 on my HP Mini 110-1116NR, then deleted the partitions that had Ubuntu on them, not knowing that Ubuntu comes with GRUB2, and sets itself as the default boot for that system. Now that GRUB2 is not installed, since it was on my only HDD, it looks for the GRUB2 partition, which does not exist.
View 9 Replies
View Related
Sep 15, 2009
I have installed Windows 7 next to my old Windows XP (so it's a dualboot situation). I have 2 physical HDD's (320 GB each) and 6 logical drives (2 + 4 primary partitions, all NTFS). After installing Windows 7, two of 4 partitions in one hdd have become inaccessible - disk manager still shows them, but I can't neither set a drive letter, nor view properties. I get the following error:
"The operation failed to complete because the Disk Management console view is not up-to-date. Refresh the view by usin the refresh task. If the problem persists close the Disk Management console, then restart Disk Management or restart computer."
Both of the inaccessible partitions are fine in Windows XP. Any ideas or solutions ?
View 9 Replies
View Related
Apr 11, 2012
I have a Asus Eee Pc 1005ha that i want to install windows 7 on. I'm running xp with a single hdd (149.05gb total) that has 4 partitions set up like this. C: 72.06gb NFTS (system), D: 72.05gb NFTS, PE: 4.89gb FAT32 (unknown partition), No Volume: 47mb unknown type (EFI system partition) this partition displays diagonal lines in disk management. I want to remove these so I only have one C: drive (149gb) where win 7 will be installed. How would I go about removing these during the install procedure? Should i just delete the no volume, PE and D: drive? Or should I delete all 4 partitions? Little confused on this rather ask before I do something wrong. From what I read the 47mb partition is the asus boot booster which speeds up boot time which I don't think I need with win 7.
View 9 Replies
View Related
May 28, 2012
I have a 500 GB Hard Disk.I want to make 9 partitions of various sizes & Install Windows 7 64 bit ( Ultimate ) in the first partition.I installed this Hard Disk as slave to my current Hard Disk & tried using disk management but it makes all partitions as Primary & doesn't give me a choice to create an extented partition within which I can make 8 Logical partitions.
I have very limited knowledge of Hardware.Also do I need to make any partition active & if yes how & what does active do ?
View 9 Replies
View Related
Apr 10, 2011
Damn Windows Update started installing a video card driver. My system is a Dell Vostro 430 and has an ATI HD 4350 (I think), but however, for some stupid reason it can only work with Dell's video driver. So when Windows Update installed the official driver for me, by the time I realised what it was doing it was too late. My screens went black; an incompatible driver screwed everything up.
Worse yet, it was still installing updates, so I was scared to turn my computer off in case it would create major problems. After waiting for four hours I decided it was time to pull the plug. After restarting the computer, it kept rebooting when it started loading Windows 7, and then soon after it didn't even get that far; it told me there was no compatible SATA device found and it refused to boot full stop. Trust this to happen at assignment hand-in week. I've got so much work to do.
I went to the library and downloaded an Ubuntu ISO and burned it to disc. I also got a legit ISO (I'm a student and use MSDN) of Windows 7 x86, since Windows 7 x64 had its problems with the software I use for my course. First of all I backed up all of my uni work using Ubuntu as a live CD, which worked okay. I moved other important data from my Windows (main) partition to my other partitions (Music, Games, TV/Films, etc) since I knew I was going to be formatting my system partition for a reinstallation.
I have two HDs installed. A 500GB one and a 1.5TB one. The drives seem to still be working since I could access them in Ubuntu. However, most of the partitions were formatted as dynamic partitions, not basic. It seemed that the partitions on my 500GB drive were basic, whereas the ones on my 1.5TB were dynamic. This is why it disallowed me to install Windows 7 on the 1.5TB drive. (It dislikes dynamic partitions for whatever reason.) However, I formatted the original basic system partition and started installing Windows 7 x86 on it. It got to 100% and was finalising installation, until it halted, told me the installation had failed, and that I'd need to restart and try again. Every time I have tried, it has failed at that point.
I don't know what the heck to do. I can't remove the partitions that exist because they contain a lot of data that I really want. I also have no means of backing up the data. I have no DVD discs left (and it would take a damn lot to back up hundreds of gigs), and no external HDs. Just for the sake of trying it out, I tried installing 7 x64 and got the same error, so I don't think it's x86-specific.
View 5 Replies
View Related
Sep 17, 2012
Is it possible to move my Windows 7 installation from the partition (both the Sys. Reserved & OS partitions) of one drive on one controller to the partition of another drive on a different controller, AND have it boot? I know "something" would have to altered, but I'm not sure "what" or "how". Is this even possible without going through a lot of hoops. Specifically I have an installation of W7x64 installed on the 1st partition of the master drive on a PATA controller. I want to move it to the 1st partition of the master drive on my SATA controller.
FROM PATA0 {sys reserved}{OS install}{data}
TO SATA0 {sys reserved}{OS install}{data}
I also have another install on the 2nd partition of my SATA4 controller and want to move it to the 1st partition of my SATA0 controller
FROM SATA4 {data}{sys reserved}{OS install}
TO SATA0 {sys reserved}{OS install}{data}
View 3 Replies
View Related
Nov 8, 2012
I cant installing windows 7 or 8 on any partition (D, E, F, G) except C partition, so I try to delete them and create a new partition but I cant also (delete and new icon are disable).
View 2 Replies
View Related
Nov 11, 2011
I have a PC with 2 hard drives- the first hard drive has a single partition and windows 7 64-bit is installed on this hard disk.Now I wish to install CentOS 6 on the first partition of the second hard disk.I have created the dvd for installing Cent OS also.How do I configure the boot loader in Windows? If I install Linux on second hard disk, will this overwrite the Windows Boot Loader? How do I create a dual boot system so that the windows boot loader correctly shows linux as an option, so that I am able to load either Windows 7 (existing) or Linux(on second hard disk- not yet installed)
View 2 Replies
View Related
Nov 10, 2009
I have a Vista Home Premium laptop and a Windows 7 upgrade disk. I want to clean install 7, but I want to keep hold of my files (I know I'll lose my programs). My laptop came with two partitions on the hard drive, C for the OS and D which I've used for files and backup. My question is this: can I clean install Windows 7 onto C without losing all the files that are on D?
View 4 Replies
View Related
Sep 15, 2009
I have installed Windows 7 next to my old Windows XP (so it's a dualboot situation). I have 2 physical HDD's (320 GB each) and 6 logical drives (2 + 4 primary partitions, all NTFS). After installing Windows 7, two of 4 partitions in one hdd have become inaccessible - disk manager still shows them, but I can't neither set a drive letter, nor view properties. I get the following error:
"The operation failed to complete because the Disk Management console view is not up-to-date. Refresh the view by usin the refresh task. If the problem persists close the Disk Management console, then restart Disk Management or restart computer."
Both of the inaccessible partitions are fine in Windows XP. Any ideas or solutions ? ;/
View 9 Replies
View Related
Mar 11, 2012
I have a drive with 2 partitions 450GB each and a 100GB partition which I use for files shared on a SVN. Currently I am using windows 7 home premium but I just got Ultimate from a friend who gave it to me as a gift. Can I install ultimate on one of the partitions and leave the rest untouched? I have important files like documents/spreadsheets for work and family photos on my primary hard drive that currently has home premium, I use the other partition for easy organization of all my games. So my question is that is there a way for me to install ultimate on that second 450GB partition and then delete windows boot files and everything from the other one to make ultimate the only bootable partition? If not then are there any cheap external drives, preferably eSATA, that I can use because I am on a budget?
View 4 Replies
View Related
Nov 7, 2012
I recently installed a fresh copy of Windows on my SSD. During setup I opted to delete all my old partitions on the drive, however I did not format the drive. Will this decision have an impact on the performance of the drive? Should I have reformatted the unallocated space on the drive to get better performance?
View 4 Replies
View Related
Dec 29, 2009
I'm trying to install Windows 7 x64 on a machine that currently has the Windows 7 RC on it. When I boot from the DVD, it immediately goes into "Windows is loading files...", which it does for 30 minutes or so and then reboots, at which point I get a message that says that Windows cannot start because files have changed.
Normally when I boot from the DVD, the first thing it asks me is whether I want to create/delete partitions, do a fresh install or an upgrade, etc. I'm not getting any of that. Anyone know what's wrong?
View 2 Replies
View Related
Dec 9, 2012
One of my friends has a windows 7 computer with an account for himself, his mother and his 2 sisters. All the home directorys are stored in drive C. Partition D is shared. The question is, how to get a partition layout like this?
Partition 1: OS + programs
Partition 2: home partition for himself
Partition 3: home partition for his mother
Partition 4: home partition for his sister
Partition 5: home partition for his other sister
Partition 6: shared partition for some photos.
View 4 Replies
View Related
May 19, 2012
Yesterday, I just reinstall fresh windows 7. After I install the OS, I just realize that my recycle bin is empty. Before I installed windows 7, some of my deleted files on my other hard disk is there. But now, I could not find it anymore. After that, I tried to select show hidden folder, files, and drives and unsellect hide protected operating system files on folder options. I try to browse to one of my hard disk, which has the deleted files on recycle bin before, then I found it the recycle bin icon there as well (For instance, the path of the drive is: N:$RECYCLE.BIN). I tried to look at the properties, and I found that the missing size of the deleted files was on there. The problem is I cannot access it. When I tried to open the recycle bin, it just empty. I need some help with this. How do I retrieve the files again to the OS recycle bin, not the hard disk recycle bin? Is it possible to access it again? I really need those files back.
View 8 Replies
View Related
Nov 17, 2012
My PC broke a while back and I had it covered by warranty so I thought they were going to scrap it and give me a new PC (Like they did last time) but they didn't.. So before that I went to User > (Username) > and deleted every library inclkuding downloads, documents etc. Anyway, when they fixed this PC and gave it back, Java was uninstalled because I had deleted the files for it, so I went to go install it and I've now installed it 6 times and it won't register as being installed even after resetting PC. I went to control panel and deleted 6 different versions of Java including JDK, Jre whatever version, but still no results.
View 4 Replies
View Related
May 23, 2012
fter completing a Toshibe laptop checkup, the Toshiba laptop program suggested I follow certain steps to help my laptop run faster. Among many other steps, they said to delete un-neccesary files in Programs and Feautures. I did, and I thought I didn't delete anything important, but now I can't connect to my wifi. I think it might be something I deleted. How do I re-install something from Programs and Features after it's been deleted?
View 2 Replies
View Related
Apr 17, 2011
In my HP G61 notebook by mistake in c: properties- security-advance setting delete all access of c:, now I can't access the c: by window, can't install and uninstall any software in my pc and not able to delete any file on pc. Now after purchase I didn't make recovery disc. Today I try to make recovery disc. Using start-recovery manager-create recovery, not open window show error (windows cannot access c:program file x86hewlett-packardrecoverycd creator.exe). How to make access on c drive.
View 2 Replies
View Related
Nov 22, 2012
Whilst removing a virus I have somehow managed to delete office 2003 with my outlook with all of my work emails on !!!I have tried a system restore but it wont let me do it and comes up with %systemroot%egistration then ComPlusStagingI could just reinstall office but I dont have all of my emails backed up on a pst file
View 2 Replies
View Related
Sep 12, 2012
I had duplicate pictures in 2 locations and thought I could get rid of one it would free up some space.Well I deleted one and both are gone. Is there anyway of retrieveing them?I tried "search and recover", according to the instructions would work wonders
View 4 Replies
View Related
Jun 11, 2012
What is the policy for Removable USB Drives in Windows? Does it only recognize the first partition? Is there any difference between FAT32 and NTFS? I am asking because time to time, I am not able to see the partitions in Windows, and I wanted to learn about its policy (rules I mean) about Removable USB Drives (What I mean is Flash drives I guess, when the USB Drives are connected; it is not showing up in the drivers, but in Removable Devices).
View 9 Replies
View Related
Nov 22, 2010
im due a fresh install of Windows 7 64bit the way i do this is to make a copy of my existing OS and put that on a second drive, i then keep this and use it as my main OS, i then put a new copy of Windows 7 on my main drive and move the stuff over from the back up that i want to keep, this way i know i wont lose anything. this time i want to partition my main drive and have dual boot one for normal use and one for gaming but when i did the back up the hdd drive i was using had a partition on it and the OS told me that i had to delete the partitions so i could install Windows 7. is there something i need to do first to be able to have 2 OS's in 2 partitions on one drive or is it just not possible to do?
View 4 Replies
View Related