Unable To Install Windows 7 - Dynamic Partitions?

Apr 10, 2011

Damn Windows Update started installing a video card driver. My system is a Dell Vostro 430 and has an ATI HD 4350 (I think), but however, for some stupid reason it can only work with Dell's video driver. So when Windows Update installed the official driver for me, by the time I realised what it was doing it was too late. My screens went black; an incompatible driver screwed everything up.

Worse yet, it was still installing updates, so I was scared to turn my computer off in case it would create major problems. After waiting for four hours I decided it was time to pull the plug. After restarting the computer, it kept rebooting when it started loading Windows 7, and then soon after it didn't even get that far; it told me there was no compatible SATA device found and it refused to boot full stop. Trust this to happen at assignment hand-in week. I've got so much work to do.

I went to the library and downloaded an Ubuntu ISO and burned it to disc. I also got a legit ISO (I'm a student and use MSDN) of Windows 7 x86, since Windows 7 x64 had its problems with the software I use for my course. First of all I backed up all of my uni work using Ubuntu as a live CD, which worked okay. I moved other important data from my Windows (main) partition to my other partitions (Music, Games, TV/Films, etc) since I knew I was going to be formatting my system partition for a reinstallation.

I have two HDs installed. A 500GB one and a 1.5TB one. The drives seem to still be working since I could access them in Ubuntu. However, most of the partitions were formatted as dynamic partitions, not basic. It seemed that the partitions on my 500GB drive were basic, whereas the ones on my 1.5TB were dynamic. This is why it disallowed me to install Windows 7 on the 1.5TB drive. (It dislikes dynamic partitions for whatever reason.) However, I formatted the original basic system partition and started installing Windows 7 x86 on it. It got to 100% and was finalising installation, until it halted, told me the installation had failed, and that I'd need to restart and try again. Every time I have tried, it has failed at that point.

I don't know what the heck to do. I can't remove the partitions that exist because they contain a lot of data that I really want. I also have no means of backing up the data. I have no DVD discs left (and it would take a damn lot to back up hundreds of gigs), and no external HDs. Just for the sake of trying it out, I tried installing 7 x64 and got the same error, so I don't think it's x86-specific.

View 5 Replies


ADVERTISEMENT

Partitions Converted From Basic To Dynamic?

Jul 11, 2011

I am building a new computer with 1TB of HDD. At first when I started to install an OS, a system volume was created automatically of 100MB size. Then I created another 200GB partition as C to install Windows 7 and 2 other partitions of 250GB. I wasn't allowed to create another one partition. After I finished windows installation, I tried to create partition in unallocated space using > New simple volume. The sytem warned me of dynamic volumes > accept it. Then eventually all 4 volumes were converted to dynamic in disk management window.

View 5 Replies View Related

Windows 7 Unable To Refind Printer With Dynamic Address?

Dec 18, 2011

I have added a windows 7 computer on a network with a network printer which gets the address dynamically but Windows 7 gives it a static address during configuration and cannot find the printer when the address changes. All other computers on the network are OK.

View 4 Replies View Related

Windows 7 Ultimate Unable To Boot From Dynamic Hard Disk?

Apr 16, 2012

somehow my hard disk partition became dynamic. i formatted system and insttaled windows 7 ultimate in the dynamic disk partition. from then onwards system is not booting. only black screen with cursor on the upper left corner of the black screen.

if i am not wrong windows 7 cannot boot with dynamic disk. i will have to go to the disk management and after conversion of dynamic disk to basic disk with deleting all the volumes (data). it is possible to boot with windows 7.

but system is not booting...not opening..so i cannot go to disk management.

hrad disk is showing some partitions with system reserved. except system reserved all the partitions are shwoing dynamic. and in only one partition formatting option and installing OS option is coming while i booting system with OS DVD.

reinstalltion through OS DVD is possble by booting through OS DVD. but in advanced option repartition option is not coming. the one partition in which i installed OS previously, only in that formatting option is coming. in other partition neither formating option is coming nor extend.

View 9 Replies View Related

Unable To See Partitions After Windows Repair?

Apr 1, 2011

Today while listening to a song. My computer restarted with a BSOD. It then asked me to repair my computer saying that some boot record is corrupt. I repaired my computer from the cd. It works fine but now i can only see my C: and no other drives are being shown though the data is still there. I cant see the remaining three partitions in my computer

View 9 Replies View Related

Unable To Use Windows Partitions In Ubuntu

Sep 10, 2009

I am using VMWare Workstation 6.5.3 in my Windows 7. I have set up Ubuntu Linux as a virtual machine & added the partitions (NTFS) from my existing physical disk via Add disc in VM settings window. Problem is

though they are visible in Ubuntu but when i try to open them i get the below authentication window..

"troy007" is my user id in ubuntu.

in spite of typing the correct password, i get the below error message

Nothing happens on clicking "Retry" or "Continue" & if i click "Abort", the ubuntu session gets disconnected.

Wats wrong?

View 9 Replies View Related

Moved Partitions - Unable To Boot Windows 7?

Jun 2, 2010

I have an Acer Aspire 1810TZ with Windows 7 Home Premium 64-bit. The HDD is 160GB.Yesterday I moved (without resizing!) both the 100MB system reserved partition and my 40GB C: partition towards the "beginning" of the HDD for the purpose of creating an unallocated space of some 110GB towards the "end" of the HDD. (The C: partition had previously been shrunk using Win7 disk management and the system worked fine after reboot prior to partition move).llowing the partition move I can however not boot into Windows anymore. Windows boot manager gives the following info:Status: 0xc0000225Info: The boot selection failed because a required device is inaccessibleThe boot manager also suggests I reinstall Windows, but of course the restore and rescue DVDs I burned based on Acer's eRecovery tool does not work.

View 4 Replies View Related

Unable To Assign Drive Letter To Sata Dynamic Hard Disk?

May 26, 2012

I formatted and installed windows 7 64 bit in a pc which previously had windows 7 32 bit. When i booted my 1tb dynamic disk was not detected. So I went into disk management and it had listed my disk as "Foreign Disk". So i imported the foreign disk.

The drive was detected and opened. So i rebooted the pc but now the drive is still not appearing in my computer. When i go to disk management the 1tb appears but there is no drive letter assigned. When i try to assign drive letter it statest that "Specified File cannot be found"

View 1 Replies View Related

Reinstalling Windows 7 On A System With Dynamic Disks With No Install DVD?

Jan 15, 2011

I have a custom built HTPC running Windows7 Home Premium 64 bit that I bought from a tin-pot PC building firm last year. It has 4 physical drives in it. The first is configured as a "basic disk" with a single C: drive partition on which windows 7 is installed. The other three are configured as a RAID1 "dynamic disk" that present themselves in Windows as a single logical drive (E:) and that's where all my data lives.Windows Media Centre has now stopped working properly and I've tried everything to fix it, in case I can avoid a reinstall! mcupdate.exe always crashes(with System.IO.FileNotFoundException): I can't update TV signal set-up or guide data ) so now I need to reinstall windows. I'm an IT professional and I've installed many prior versions of windows in the past, but never Windows 7:

1) If I reinstall Windows 7 on my C:/ drive, will the E: drive be left unaffected and the fresh install of windows will still be able to see the E: drive and access all the data on it without any permissions issues?

2) The company that I bought the HTPC from neglected to give me a DVD with the Windows 7 installer (and prod key) on and they went out of business a few months ago, so I'm feeling a bit stuck. I've used a free tool to extract my Windows 7 product key from the registry, and borrowed a Windows 7 DVD from a friend. Will reinstalling from this DVD with the product key I've extracted work, or is the product key tied to the physical DVD (or does it just need to pass a checksum algorithm?) If I use my product key to reinstall, will I also be able to re"activate" Windows 7 or will it now think it's a dodgy copy? My current install says it's an OEM version (when I tried to get support from MS.com), but my friend's DVD is a full retail one - is that a problem too? What options do I have here? Can I, for example, create a copy of my friend's DVD and amend the prod-key in the poduct.ini file to be mine in the "HomePremium=" entry?

3) Before I attempt anything, I'm keen to do a full system backup. I've done this with the Windows 7 system image tool and have a 154 GB file that I've copied to an external USB hard drive, and I'm going to create a restore boot "disk" on a CD. However, If I need to do a restore, can the restore app read from a USB HD or not? I assume it can't read from the dynamic disk E: drive? Or can I just keep it on the C: drive, or will this get wiped completely when I reinstall windows, thus losing the image file?

View 9 Replies View Related

Install Windows 7 On A Software Raid 0 MBR Dynamic Partition?

Jul 30, 2011

I have seen this question being asked a few times already. I just bought 2xSamsung Spinpoint F3 1TB drives and I created a dynamic striped partition with MBR in comuter management. If I try to install win 7, after dvd boot-up, will I be able to select the partition and install windows on it ? I know all about the advantages and disadvantages of using software raid 0. But, my question is simple. Can you just install an O/S on that type of partition (will it be detectable?) or do I have to buy a "fake raid" controller or boot some type of application first to make it detectable everytime I boot up my computer?

View 2 Replies View Related

Unable To Resize Partitions Correctly?

Feb 21, 2012

i am trying to take some un-allocated spots in my partition to increase my main partition. However, I am trying to do so and cannot, The program i use (Easeus partition manager won't allow me to extend one of my partition to include allocated space, also according to Easeus the partition is allocated but according to disk manager in computer management in administrative tools, its an extended partition that won't let me delete it and says "There isn't enough space available on the disks to complete this operation." How should I proceed?

View 9 Replies View Related

Install Dynamic Link Library?

Oct 18, 2011

Install dynamic link library?

View 1 Replies View Related

How To Install New OS On Dynamic Disk (Old Corrupted)

Jan 3, 2012

I have a problem on my hard disk & it is dynamic disk the OS is corrupted how to install a new OS to my corrupted Dynamic Disk.

View 7 Replies View Related

Unable To Rename The Drive (partitions) Names

Dec 5, 2009

When i installed is version of win7 ie,Tiny7 Rev01 By experience. After that i tried to rename the drives(partitions) in 'My Computer' the first one ie,C: got renamed but the others r not. When i right clicking the a drive suppose D: & click to rename the edit cursor comes but after clicking OK it stays as 'LOCAL DISK D', but earlier when i installed this same version there was no such problem.

Anyone has any fix? If yes then plzzzz help me guys. Waiting for your response desperatly..

EDIT: One info i forgot to write here ie,I have A dual boot..i have XP installed in a other partition ie,C:..When i rename any partition while logged in win7 it not get renamed as i said but after that if i restart & log in XP then that specific partition which i renamed i win7 shows in XP..Eg:Suppose i renamed the C: as Master in Win7...it stays as local disk as in the sc above...but after that when log in Xp the C: shows as Master...&& in Xp everything is normal..

View 8 Replies View Related

Deleted Partitions And Can't Install Windows 7?

Jan 10, 2013

I have just deleted all partitions on my laptop hard drive to install windows 7 and messed something up...I know cannot install windows 7 as it just sticks at the setup is starting screen..can I put the drive in my pc (running xp) and save it somehow ? I have nothing on the laptop to repair or anything as far as I can see ...

View 12 Replies View Related

Inaccessible Partitions After Windows 7 Install

Sep 15, 2009

I have installed Windows 7 next to my old Windows XP (so it's a dualboot situation). I have 2 physical HDD's (320 GB each) and 6 logical drives (2 + 4 primary partitions, all NTFS). After installing Windows 7, two of 4 partitions in one hdd have become inaccessible - disk manager still shows them, but I can't neither set a drive letter, nor view properties. I get the following error:

"The operation failed to complete because the Disk Management console view is not up-to-date. Refresh the view by usin the refresh task. If the problem persists close the Disk Management console, then restart Disk Management or restart computer."

Both of the inaccessible partitions are fine in Windows XP. Any ideas or solutions ?

View 9 Replies View Related

Deleting Partitions During Windows 7 Install?

Apr 11, 2012

I have a Asus Eee Pc 1005ha that i want to install windows 7 on. I'm running xp with a single hdd (149.05gb total) that has 4 partitions set up like this. C: 72.06gb NFTS (system), D: 72.05gb NFTS, PE: 4.89gb FAT32 (unknown partition), No Volume: 47mb unknown type (EFI system partition) this partition displays diagonal lines in disk management. I want to remove these so I only have one C: drive (149gb) where win 7 will be installed. How would I go about removing these during the install procedure? Should i just delete the no volume, PE and D: drive? Or should I delete all 4 partitions? Little confused on this rather ask before I do something wrong. From what I read the 47mb partition is the asus boot booster which speeds up boot time which I don't think I need with win 7.

View 9 Replies View Related

Make 9 Partitions & Install Windows 7 ?

May 28, 2012

I have a 500 GB Hard Disk.I want to make 9 partitions of various sizes & Install Windows 7 64 bit ( Ultimate ) in the first partition.I installed this Hard Disk as slave to my current Hard Disk & tried using disk management but it makes all partitions as Primary & doesn't give me a choice to create an extented partition within which I can make 8 Logical partitions.

I have very limited knowledge of Hardware.Also do I need to make any partition active & if yes how & what does active do ?

View 9 Replies View Related

Deleted The Partitions Can't Install Windows 7?

Feb 10, 2013

I have a little problem.I have windows XP and I wanted to install Windows 7.All went well till the part where I deleted the existing partitions and created new ones.The problem is after this step the installation failed and an error message appeared :,,Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart the installation.

View 1 Replies View Related

Moving Windows 7 Install Between Partitions / Drives Or Controllers?

Sep 17, 2012

Is it possible to move my Windows 7 installation from the partition (both the Sys. Reserved & OS partitions) of one drive on one controller to the partition of another drive on a different controller, AND have it boot? I know "something" would have to altered, but I'm not sure "what" or "how". Is this even possible without going through a lot of hoops. Specifically I have an installation of W7x64 installed on the 1st partition of the master drive on a PATA controller. I want to move it to the 1st partition of the master drive on my SATA controller.

FROM PATA0 {sys reserved}{OS install}{data}
TO SATA0 {sys reserved}{OS install}{data}

I also have another install on the 2nd partition of my SATA4 controller and want to move it to the 1st partition of my SATA0 controller

FROM SATA4 {data}{sys reserved}{OS install}
TO SATA0 {sys reserved}{OS install}{data}

View 3 Replies View Related

Cannot Install Windows 7 On Other Partitions - Delete And New Icon Disabled

Nov 8, 2012

I cant installing windows 7 or 8 on any partition (D, E, F, G) except C partition, so I try to delete them and create a new partition but I cant also (delete and new icon are disable).

View 2 Replies View Related

Windows 7 Installed-how To Setup Partitions/boot Loader To Install Linux On Second Hdd

Nov 11, 2011

I have a PC with 2 hard drives- the first hard drive has a single partition and windows 7 64-bit is installed on this hard disk.Now I wish to install CentOS 6 on the first partition of the second hard disk.I have created the dvd for installing Cent OS also.How do I configure the boot loader in Windows? If I install Linux on second hard disk, will this overwrite the Windows Boot Loader? How do I create a dual boot system so that the windows boot loader correctly shows linux as an option, so that I am able to load either Windows 7 (existing) or Linux(on second hard disk- not yet installed)

View 2 Replies View Related

Dynamic Disk To Basic Disk When Windows 7 Is Installed On Dynamic Disk

Mar 13, 2011

so i got this cool Hp laptop... nice the bad part ... I had a single 500 gb Hard disk. only two partitions ... experimented to partition it ... 1. I upgraded my basic drive to dynamic drive ( got four partitions now) 2. My OS (win 7 home premium x64) is on one of the partiotion on the dynamic disk. QUESTIONS How do i convert back to basic... i only have my OS key no install cd? Can i take a back up or sys image that i can use later on after converting my hard disk to basic?

View 1 Replies View Related

Clean Install Using Partitions

Nov 10, 2009

I have a Vista Home Premium laptop and a Windows 7 upgrade disk. I want to clean install 7, but I want to keep hold of my files (I know I'll lose my programs). My laptop came with two partitions on the hard drive, C for the OS and D which I've used for files and backup. My question is this: can I clean install Windows 7 onto C without losing all the files that are on D?

View 4 Replies View Related

Inaccesible Partitions After Win 7 Install

Sep 15, 2009

I have installed Windows 7 next to my old Windows XP (so it's a dualboot situation). I have 2 physical HDD's (320 GB each) and 6 logical drives (2 + 4 primary partitions, all NTFS). After installing Windows 7, two of 4 partitions in one hdd have become inaccessible - disk manager still shows them, but I can't neither set a drive letter, nor view properties. I get the following error:

"The operation failed to complete because the Disk Management console view is not up-to-date. Refresh the view by usin the refresh task. If the problem persists close the Disk Management console, then restart Disk Management or restart computer."

Both of the inaccessible partitions are fine in Windows XP. Any ideas or solutions ? ;/

View 9 Replies View Related

Will A Clean Install Wipe Partitions

Mar 11, 2012

I have a drive with 2 partitions 450GB each and a 100GB partition which I use for files shared on a SVN. Currently I am using windows 7 home premium but I just got Ultimate from a friend who gave it to me as a gift. Can I install ultimate on one of the partitions and leave the rest untouched? I have important files like documents/spreadsheets for work and family photos on my primary hard drive that currently has home premium, I use the other partition for easy organization of all my games. So my question is that is there a way for me to install ultimate on that second 450GB partition and then delete windows boot files and everything from the other one to make ultimate the only bootable partition? If not then are there any cheap external drives, preferably eSATA, that I can use because I am on a budget?

View 4 Replies View Related

Deleting Partitions VS. Formatting During Fresh Install?

Nov 7, 2012

I recently installed a fresh copy of Windows on my SSD. During setup I opted to delete all my old partitions on the drive, however I did not format the drive. Will this decision have an impact on the performance of the drive? Should I have reformatted the unallocated space on the drive to get better performance?

View 4 Replies View Related

Doesn't Prompt To Delete Partitions, Do Fresh Install

Dec 29, 2009

I'm trying to install Windows 7 x64 on a machine that currently has the Windows 7 RC on it. When I boot from the DVD, it immediately goes into "Windows is loading files...", which it does for 30 minutes or so and then reboots, at which point I get a message that says that Windows cannot start because files have changed.

Normally when I boot from the DVD, the first thing it asks me is whether I want to create/delete partitions, do a fresh install or an upgrade, etc. I'm not getting any of that. Anyone know what's wrong?

View 2 Replies View Related

Create Home Partitions And Partitions For The OS With Programs?

Dec 9, 2012

One of my friends has a windows 7 computer with an account for himself, his mother and his 2 sisters. All the home directorys are stored in drive C. Partition D is shared. The question is, how to get a partition layout like this?

Partition 1: OS + programs
Partition 2: home partition for himself
Partition 3: home partition for his mother
Partition 4: home partition for his sister
Partition 5: home partition for his other sister
Partition 6: shared partition for some photos.

View 4 Replies View Related

Unable To Install Windows 7 - Clean Install

Jan 31, 2010

I'm an IT student who got a free Win 7 x64 disk from my school, and I am unable to do a clean install. My system specs are as follows:

Intel Core 2 Duo 3.12 Ghz
nVidia GeForce 9800 GTX 512 MB PCI-e
320 GB Western Digital HD SATA
1 Gb DDR2 1066 MHz and 2x2Gb DDR2 1066 MHz SDRAM

I set my boot sequence to boot from DVD-ROM drive first, and HD second. It goes to the "Windows is loading files" screen and gets hung up. I started the process and went to watch TV for an hour, and it is still on the "Windows is loading files" screen. I haven't gotten any error messages. I've unplugged all USB devices from my computer as I have seen on this forum that it has worked for some people.

edited to add: I originally had only 2 Gb of RAM, and it got hung up at the "Windows is loading files" screen. I thought it was getting hung up because I didn't have enough RAM, so I bought brand new 2 sticks of 2 Gb RAM. I took out one of the 1 Gb sticks and placed both of the 2 Gb of RAM...for a total of 5 Gigs. And, it is still doing the same thing.

View 9 Replies View Related

Dynamic Disk In Windows 7?

Oct 10, 2012

I have been using computers for a while but just recently started to learn what is really going on. I am having trouble understanding what a dynamic disk is. I have read a lot online but I need a very very simple explanation as I am an older person and a lot of the explanations I read online use technical terms which I also do not understand. I think what I have is a basic disk and I don't understand what a dynamic disk is. Can you have a dynamic disk if you have just a single regular physical disk, and if so what is the advantage.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved