Partitions Converted From Basic To Dynamic?

Jul 11, 2011

I am building a new computer with 1TB of HDD. At first when I started to install an OS, a system volume was created automatically of 100MB size. Then I created another 200GB partition as C to install Windows 7 and 2 other partitions of 250GB. I wasn't allowed to create another one partition. After I finished windows installation, I tried to create partition in unallocated space using > New simple volume. The sytem warned me of dynamic volumes > accept it. Then eventually all 4 volumes were converted to dynamic in disk management window.

View 5 Replies


ADVERTISEMENT

Converted All Drives To Dynamic How To Revert Back To Basic

Apr 4, 2012

well scenario is I got my new dell 15r laptop with windows 7 basic loaded yesterday.. so backed it up and wanted to put my old PC's windows 7 ultimate version on it. I installed it, while installation it allowed to have only 4 partitions.it already had 2 partitions1) Recovery - 15gb2) something i forgot ... some 40MBso i made a partition of 125GB for OSand rest of unallocated space ie some 660gb could not be allocated in more than one partition so i let it be unallocatedso after installtion got completed and OS started i went in disk management and tried to make that unallocated space of 660GB in 2-3 partitions.but it converted all my previous partitions also to dynamic. even recovery partitions.ow do i go back to basic partitions?? particularly about that recovery partition and my C: (OS partition) ??

View 7 Replies View Related

Converted My Drive (non OS) To Dynamic

May 7, 2009

I have a 500GB IDE (seconday master) (all my OS and other drives are on SATA) to dynamic. (it wouldn't being recognized by Windows 7, and in a hurry I converted it to Dynamic).

View 1 Replies View Related

Converted HDD To Dynamic - How To Change It Back

May 2, 2012

I had some partitions, as follows.
||SYSTEM RESERVED||WINDOWS 7||SHARED DATA||WINDOWS 8||

Next, I shrank the Windows 8 volume and made a new volume. My plan was going to be to clone the Windows 8 volume to the new volume, so I could add more storage space to my shared data partition. The problem is this: creating the extra volume converted my whole HDD to dynamic. That said, my Windows 8 boot was lost immediately. So, I just deleted the Windows 8 partition and the new one and merged all that extra space to my data partition. Now, will this mess with my Windows 7 boot at all? I'm scared to restart my computer. All of my partitions (including my Windows 7 one) are just simple volumes now.

View 7 Replies View Related

Can A GPT Boot Disk Be Converted To A Basic Volume

Feb 3, 2013

I was setting up a Win7 new build with an Asus P8B75-V and an SSD. Although I previously have done clean installs with UEFI motherboards and SSDs, this time the install DVD created a GPT volume on the boot disk (much to my surprise and which I discovered opnly after loading all the apps, moving the email, etc, etc.).

Knowing a lot more about basic MBR volumes (and how to fix problems), I would like to convert the GPT to a basic volume. I have Acronis DiskDIrector 11 which can convert the GPT to MBR, but when I tried that, it rendered the disk unbootable. (The conversion resulted in a 124MB unallocated space, followed by a 100MB FAT32 volume (!?!?!), and then the rest of the drive as NTFS.)

Is there a way to convert a boot disk from GPT to basic and have it be bootable? Is there anything that can be done with the converted HD to make it bootable?

View 3 Replies View Related

From Dynamic To Basic Format

Feb 9, 2013

In order to change back the format type of my system disk from Dynamic to Basic, I took a system image using Win 7 Pro System Image Tool and deleted all the partitions on the system disk, change the format type to Basic using the Command Prompt, and restored the image. Unfortunately, the format type restored also to Dynamic.Did I missed any step? or there is something wrong?

View 3 Replies View Related

Converting From A Basic Disc To Dynamic

Sep 19, 2012

I have been reading up on it from microsofts site as well as various places throughout the web. most articles were also a few years old might have been before windows 7 was even released.from what I understand you will only really have an issue if you are using windows 98, 2000 , xp and server 2003.What I am trying to do is make a partition but the only way to do it so it seems (I am using the admin disk management tool)is to convert to dynamic.I am creating the partition to install a small linux distro to use in dual boot but the part that is making me weary is the last step of the disk management tool says "the operation you selected will convert the selected basic disk(s) to dynamic disc(s). If you convert the disk(s) to dynamic you will not be able to start installed operating systems from any volume on the disk(s)(except the current boot volume.now I will (hopefully) never have to deal with those headaches called OS's again. So would I have any negative impact from this conversion? would i still be able to boot windows 7 with all of my data still intact?

View 8 Replies View Related

How To Change From Dynamic To Basic Disc

Jun 12, 2011

i have a acer laptop having 500 gb hd. Isince i want to dual boot ubuntu with windows 7 i was planning to install it on Local Disk F so i shrink the Drive F for swap area required for ubuntu. I shrink it to 4500MB and new partition was created showing 4.5GB of space. Then i right click on it to create new volume. I keep on clicking next till a warning came.I click ok to that and my whole disk got converted to Dynamic disk. Now my problem is that my os is still booting even after converting to dynamic . I dont know how.
Since i have only one hd how can i use Partion wizard since i can't unallocate the whole HD.

View 9 Replies View Related

Convert Dynamic To Basic Disc

Apr 22, 2012

I wanted to make a new partition on my hp laptop on the only disc it hasso as to create a system image.Unfortunately,because it came with already 4 partitions I accidentally turned the disk into a dynamic disk.Now its booting normally but I cant load the system Image that I have created before the partition.Other than that the pc is running smoothly. As I said this is the only disk on the system.Is it possible to convert the disk back to basic?After a lot of googling I found some exmples but all of them assumed you had a second disk on your system.Is it possible to convert the disk back to basic without having to reinstall windows?(I have no windows cd)

View 1 Replies View Related

Basic Versus Dynamic Volume

Jun 29, 2011

1) What is the major difference between Dynamic and Basic Volume It seems Dynamic volume can let you change the size of the volume up or down when there is an adjacent unused physical space, without impairing the files already stored. However Partitions (Basic Volume) can only be extended, and will always requires reformating.

2) It seems that Dynamic Volume has a lot more overheads, so it may be a little slower and actual file stored will be less, any opinion on that?

I did notice one of the Dyname Volume started to show massic missing storage space, e.g. Used Space of 30GB only has 7GB realy files on it, absolutely no hidden files there because I created the volume. This happens after shrinking and expanding it up and down a couple of time, BUG?!! If so it is a serious one.

View 6 Replies View Related

Dynamic Disk To Basic Disk When Windows 7 Is Installed On Dynamic Disk

Mar 13, 2011

so i got this cool Hp laptop... nice the bad part ... I had a single 500 gb Hard disk. only two partitions ... experimented to partition it ... 1. I upgraded my basic drive to dynamic drive ( got four partitions now) 2. My OS (win 7 home premium x64) is on one of the partiotion on the dynamic disk. QUESTIONS How do i convert back to basic... i only have my OS key no install cd? Can i take a back up or sys image that i can use later on after converting my hard disk to basic?

View 1 Replies View Related

Change Dynamic System Partition To Basic?

Aug 13, 2012

i got only one disk and all of the partitions are dynamic i have low space on the system files partition so i decided to extend the partition i deleted a partition and had an unallocated space but i couldnt extend the the system partition i tried to install windows but it couldnt install on a dynamic disk

View 2 Replies View Related

Unable To Install Windows 7 - Dynamic Partitions?

Apr 10, 2011

Damn Windows Update started installing a video card driver. My system is a Dell Vostro 430 and has an ATI HD 4350 (I think), but however, for some stupid reason it can only work with Dell's video driver. So when Windows Update installed the official driver for me, by the time I realised what it was doing it was too late. My screens went black; an incompatible driver screwed everything up.

Worse yet, it was still installing updates, so I was scared to turn my computer off in case it would create major problems. After waiting for four hours I decided it was time to pull the plug. After restarting the computer, it kept rebooting when it started loading Windows 7, and then soon after it didn't even get that far; it told me there was no compatible SATA device found and it refused to boot full stop. Trust this to happen at assignment hand-in week. I've got so much work to do.

I went to the library and downloaded an Ubuntu ISO and burned it to disc. I also got a legit ISO (I'm a student and use MSDN) of Windows 7 x86, since Windows 7 x64 had its problems with the software I use for my course. First of all I backed up all of my uni work using Ubuntu as a live CD, which worked okay. I moved other important data from my Windows (main) partition to my other partitions (Music, Games, TV/Films, etc) since I knew I was going to be formatting my system partition for a reinstallation.

I have two HDs installed. A 500GB one and a 1.5TB one. The drives seem to still be working since I could access them in Ubuntu. However, most of the partitions were formatted as dynamic partitions, not basic. It seemed that the partitions on my 500GB drive were basic, whereas the ones on my 1.5TB were dynamic. This is why it disallowed me to install Windows 7 on the 1.5TB drive. (It dislikes dynamic partitions for whatever reason.) However, I formatted the original basic system partition and started installing Windows 7 x86 on it. It got to 100% and was finalising installation, until it halted, told me the installation had failed, and that I'd need to restart and try again. Every time I have tried, it has failed at that point.

I don't know what the heck to do. I can't remove the partitions that exist because they contain a lot of data that I really want. I also have no means of backing up the data. I have no DVD discs left (and it would take a damn lot to back up hundreds of gigs), and no external HDs. Just for the sake of trying it out, I tried installing 7 x64 and got the same error, so I don't think it's x86-specific.

View 5 Replies View Related

Converting A Dynamic Disk To Basic Without Data Loss

Sep 11, 2011

[FONT=verdana, geneva, lucida, 'lucida grande', arial, helvetica, sans-serif]I initially had 1 500gb dynamic disk, with one partition containing all my documents and windows files. I created a partition in the free space to copy my documents into so I could overwrite Windows keeping my documents intact. However I did not have enough free space for all my documents so after copying over one batch of files I shrunk the windows partition and extended my document partition. I had to repeat this again so I now have three extended document partitions.[/FONT] I then put in the windows CD, formatted the OS Recovery, SYSTEM Reserved and Windows parititions but then was unable to install Windows as it did not recognise any disks. I attempted FixMBR etc but to no avail.

I searched around and saw i may be able to change the sector hex from 42 (dynamic) to 07 (basic), but im wondering whether doing so will preserve the extended partitions i have? So my question is, will changing 42 to 07 preserve the extended partitions. Do I need to repeat for each 42 (like the link you posted) and then the three dynamic extended partitions will then become one basic partition? At the moment I can not actually see the data so have no idea how to back it up? Otherwise I would do as you say and back it up, format and copy back over.

[URL]

DISKPART: Acronis Disk Director (see documents spanned)

Active unDelete (again, three partitions)

HxD (showing 42)

So, basically im asking if i am safe to convert 42 to 07 WITHOUT losing any data?

View 1 Replies View Related

Converting A Dynamic Disk To Basic Without Data Loss

Sep 11, 2011

I have a 500GB dynamic hard drive which had a Windows 7 install on it. I wanted to reinstall Windows, so from within Windows setup I formatted the system and Windows partition, leaving a partition containing documents and pictures (i was unable to delete them). From then, Windows seemed unable to recognise the disk so i searched in DISKPART and found that the disk was labelled as INVALID.

After Googling around it looks as though i can simply change the 1C02 in the hex from 42 to 07 - however, my only concern was that the documents i have on this drive are spanned across three adjacent (dynamic?) partitions - so i am concerned that by focing the disk to be basic i will lose the connection between these partitions. [URL]

DISKPART:

Acronis Disk Director (see documents spanned) Active unDelete (again, three partitions) HxD (showing 42) So, basically im asking if i am safe to convert 42 to 07 WITHOUT losing any data?

View 9 Replies View Related

Way To Convert Dynamic Drive To Basic Without Losing Data?

Oct 24, 2012

I've 4 Partition created on my Hard Drive..!!1. System Usable Partition (Reserved for System by its own)2. Local Partition (In which Windows is Installed)3. Another Partition (for Storage purpose)4. One more Partition (for Storage purpose)So, when today I tried to shrink my one of the partition (except system usable & C Drive/Local Drive) the the Windows alerted me with the Message : "Your Operating System won't boot after changing the drive to Dynamic Drive" ....!!After this message appears I clicked yes..!!The partition is been made

View 10 Replies View Related

Convert Dynamic Drive To Basic Without Losing Data?

Jan 19, 2013

after shrinking my hard drive it has changed to dynamics and i cant even install windows on a different disk,what shuold i do?

View 2 Replies View Related

Partitioning - Operation You Selected Will Convert Basic Disk To Dynamic

Sep 27, 2012

When I am trying to partition new drive from C drive. My C drive have 450 GB Space, so wanted to make a new drive of 250 GB. Did the basic steps but when clicking on Finish I get the following error "The operation you selected will convert the selected basic disk(s) to dynamic disk(s). If you convert the disk(s) to dynamic, you will not be able to start installed operating systems from any volume on the disk(s) (except the current boot volume). Are you sure you want to continue?".

View 1 Replies View Related

Convert Dynamic Disc Back To Basic On The Only System Disc?

Apr 22, 2012

I wanted to make a new partition on my hp laptop on the only disc it as.Unfortunately,because it came with already 4 partitions I accidentally turned the disk into a dynamic disk.Now its booting normally but I cant load the system Image that I have created before the partition.Other than that the pc is running smoothly.As I said this is the only disk on the system.Is it possible to convert the disk back to basic?After a lot of googling I found some exmples but all of them assumed you had a second disk on your system.Is it possible to convert the disk back to basic without having to reinstall windows?(I have no windows cd

View 4 Replies View Related

Go Back From Dynamic Disk Mode To Basic Mode In HP Probooks

Nov 2, 2012

Today I wanted to intsall Windows 8 in dual boot envirnment with Windows 7 so I created a separate 60gb partition for Windows 8 but after the partition was created, all the previous volumes like Windows 7, HP_Recovry and HP_Tools and the newly created Windows 8 partition are now dynamic plus I can't install Window 8 on that dynamic partition. Below is current situation as shown in disk management in Windows 7: [URL]

I don't want to lose my data including the Windows 7, and HP_Recovry and HP_Tools partitions. clean method to go back to basic disk mode from dynamic mode without losing data. When try to convert from dynamic to basic using easeus utility, it gave me following warning: [URL]

View 3 Replies View Related

Changing A Dynamic Partition To A Basic Partition?

Mar 16, 2012

i have a hp laptap with a core i3 . with 8gig of ram. 500 gig hard drive. i made a 100 gig partion and it went to dynamic changing it back to basic. i read the mini tools application. if i tried that would it erase my hard drive if i went back to basic. all i wanted was a back up for my files.

View 1 Replies View Related

Can't Convert Dynamic Disk To Basic Disk

Jun 6, 2012

Last night as I was attempting to install Windows 8 RP to test it out, I decided I would do a dual boot incase I didn't like it. It downloaded, burned fined and I went to make a new partition, and this is where things went south for me. It converted every disk to dynamic once I had created the new disk to install it on and for the life on me I can't get it to convert back to basic, so I'm pretty well screwed if something goes wrong. Things I've done:

1) Attempt system restore - Ok, so I didn't have a restore point created so this is of no help.

2) I followed this guide found here on SevenForums and attempted all 3 methods - nothing worked Convert a Dynamic Disk to a Basic Disk

3) I downloaed EaseUse Partition master to attempt to change dynamic back to basic, and still a no go.

4) Tried to install Windows 8 again and it would not let me delete the current dynamic disk partitions to start over

5) Tried HP recovery tools to set the computer back to factory condition and it wouldn't work.

Is it possible to delete everything and start over from scratch or will it still be dynamic? At this point, i want a time machine so I can go back before ever attempting to make a dual boot.

View 4 Replies View Related

Convert A Basic Disk To A Dynamic Disk

Sep 29, 2009

How to Convert a Basic Disk to a Dynamic Disk ?

View 0 Replies View Related

Convert A Dynamic Disk To A Basic Disk

Jan 11, 2010

How to Convert a Dynamic Disk to a Basic Disk ?

View 0 Replies View Related

Change Dynamic Hard-disk To Basic Hard-disk?

Nov 26, 2012

i can not install dual-both window7 and window8 on my computer.i think that may be my hard is dynamite.not basic.

View 13 Replies View Related

Everything Converted To Ink Cannot Access Anything

Mar 24, 2011

i have an Acer Aspire laptop with Windows 7. im not sure why but all of my links, files, and folders have been converted to .lnk. i cant acess anything except for Recycle Bin and Windows Media Player (only if i click a song from the start menu).i can only get internet acess from a picture i downloaded wrong as a google chrome file instead of .jpeg. my question is how can i fix it?

View 7 Replies View Related

Create Home Partitions And Partitions For The OS With Programs?

Dec 9, 2012

One of my friends has a windows 7 computer with an account for himself, his mother and his 2 sisters. All the home directorys are stored in drive C. Partition D is shared. The question is, how to get a partition layout like this?

Partition 1: OS + programs
Partition 2: home partition for himself
Partition 3: home partition for his mother
Partition 4: home partition for his sister
Partition 5: home partition for his other sister
Partition 6: shared partition for some photos.

View 4 Replies View Related

Dual OS Converted To Single OS?

Nov 7, 2011

I was running Vista and Windows 7 as a dual OS on two HDDs. I have just removed the HDD with Vista on it and reverted to a purely W7 OS however, when I now bootup, I am still seeing the message on screen giving the choice of W7 or Vista.

View 3 Replies View Related

Converted All Files To Pdf And Cant Open Them?

Dec 8, 2012

I accidently coverted all my desk top icons to adobe readerand now I cannot open them because it tells me there is a problem with opening them ,how do I put them back to what they were

View 2 Replies View Related

All Icons Have Converted To Microsoft Word

Dec 6, 2011

I sorted my desktop, and put the desktop shortcuts (Microsof Word, Excel, outlook etc...), onto task bar (next to start button) however I have come back to PC and they have all seemingly have converted to Microsoft word. When I open start menu, all my recent programs have again converted to word.When I have opened any of these a word document opens, a load of gobbildygook, as well as can not open in dos mode.I have managed to cercumnavigate word and excel, by opening one of my exixting files starting a new document and saving this to desktop, but can only do this with paint, word, and excel.

View 6 Replies View Related

My .exe Files All Converted To Vlc Media Player?

Jan 27, 2013

I wanted to open a games downloaded through internet, but the game was not getting opened so i opened it with vlc media player, but all my other programs including microsoft office and windows getting started also got changed to vlc media player, now how to change all the programs to their original programs.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved