i have a hp laptap with a core i3 . with 8gig of ram. 500 gig hard drive. i made a 100 gig partion and it went to dynamic changing it back to basic. i read the mini tools application. if i tried that would it erase my hard drive if i went back to basic. all i wanted was a back up for my files.
View 1 Repliesi got only one disk and all of the partitions are dynamic i have low space on the system files partition so i decided to extend the partition i deleted a partition and had an unallocated space but i couldnt extend the the system partition i tried to install windows but it couldnt install on a dynamic disk
View 2 Replies View RelatedI'm currently running Win XP Pro. on dynamic disks with the system partition mirrored.I have a 20GB simple volume on one of the dynamic disks which I had intended to install a copy of Windows 7 Enterprise on, intending to dual-boot as I changed over from XP to 7, but it appears that you can't install Windows 7 on a dynamic disk as "setup cannot find a location for temporary files." According to Microsoft my only option is to revert the existing dynamic disk/s to basic - losing everything on it including my XP installation.Microsoft says not to mix volumes and partitions on the same disk, but a third party application called Dynamic Disk Converter claims to be able to change simple volumes back to primary partitions - though it isn't clear from the documentation if this can be done to just one volume out of several on a dynamic disk.My options appear to be:
1. Get another hdd for Windows 7.
2. Break the XP mirror and convert one dynamic disk back to basic for Windows 7 - losing my RAID protection
3. Ignore Microsoft's advice and see if Dynamic Disk Converter actually can convert a simple volume back to a primary partition, risking my whole installation.
i was using hp g42 laptop i was delete the hp tools partition.in this situation the total os was crashed and i lose the total data how can iget the data?
View 2 Replies View RelatedI want to setup a Raid 1 mirror from one drive to another using Windows software raid. I know in XP you could not do this on the boot partition (C drive). Is it possible to do this in Windows 7?
View 2 Replies View RelatedI have seen this question being asked a few times already. I just bought 2xSamsung Spinpoint F3 1TB drives and I created a dynamic striped partition with MBR in comuter management. If I try to install win 7, after dvd boot-up, will I be able to select the partition and install windows on it ? I know all about the advantages and disadvantages of using software raid 0. But, my question is simple. Can you just install an O/S on that type of partition (will it be detectable?) or do I have to buy a "fake raid" controller or boot some type of application first to make it detectable everytime I boot up my computer?
View 2 Replies View Relatedmy hard disk converted to dynamic.now it is not booting, it have 300 gb data .i need convert in to basic and working normally.
View 2 Replies View RelatedI am using WS2008 however the procedure is the same as Windows 7.
What I want to do, is have the ability to install, on a partition, a bootable partition where it will allow me to install Windows from a directory which contains the entire contents of the DVD/ISO which is on location on another HDD (on the same computer)
how is it possible to do this? Basically this is for a server that exists "out there" and have no access to it. I manage it myself etc... and I know this is possible to do, but has been such a long time since Ive done it.
What is it that I need to install on the computer to allow me to go into some mode (recovery mode maybe) so I can run setup?
How to do disk management in which windows 7 is installed.
View 3 Replies View RelatedI have windows 7 Home basic installed in my Laptop. When i bought it, it had only two partitions one for c: and one for recovery... i tried creating a partition but when i do so this appears:
And when i click yes on this alert, this appears:
I want to create partition without losing OS and recovery files in d: drive..
Not able to create partition in windows 7 Home Basic 64bit,
View 2 Replies View RelatedI'm sure there's probably a tutorial for this somewhere in the tutorial index but I can't seem to find it.
I have 3 partitions on my hard drive. C is for Windows 7 32 bit Ultimate, D is for Vista 32 bit Home Premium and E is a recovery partition. My problem is that I want to delete my Vista partition and then expand my 7 but there's one thing in the way.
D is my system partition. What I want to do is make C my system partition. Just as an extra bit of information, here's the status
E: Healthy, Primary Partition
D: Healthy, system, primary partition
C: healthy, boot, page file, active, crash dump, primary partition
my C drive is going to be full and I have lots of free space in my other drives, how can I change the partitioning by a software without loosing data,
View 1 Replies View RelatedEarlier I had two partitions, D(logical) and C(system). Now, I have added a new HDD and I've made two new partitions, B(logical) and S(system), now I want to format C and install Windows in S partition.
View 4 Replies View RelatedSo, I have a disk with Windows 7 installed on the 3rd partition of that disk. I want to move that installation to the first partition of the disk.Repartitioning and boot settings aside, is there a way to do that? (besides using sysprep)Last time I tried that, windows would load slowly and after ''Preparing your desktop'' screen it would just show the one-color desktop, no icons, no explorer shell loaded.Alt,Ctrl,delete works, for running ''explorer'' from task manager, but computer, control panel or anything system-related does not open, instead it pops up an error window with, (e.x.)''{ED7BA470-8E54-465E-825C-99712043E01C}'' not found.
View 6 Replies View RelatedAs Windows tells me, "on EFI systems, Windows can only be installed to GPT disks". This is the error message I get trying to install a Windows upgrade from 7 Home Premium to Pro. I have to do a custom install because I am installing English over Russian. I have looked on the internet about how to change my partition system to GPT. Seems like something I can do, however, I have a question: If I have only one physical hard drive in my machine, is it possible the change the partition system from MBR to GPT? I see lots of examples of doing it to a second hard drive, but not many when it is the only hard drive. It is a new drive and clean, so I do not worry at this point about the data on it.
View 4 Replies View RelatedI install Windows 7 64 bit in a 60 gb partition of my HDD (C drive). I have about 200 GB free space in D drive. Now I want to make a 60 GB partition from the free space of D drive.
View 4 Replies View RelatedIn order to change back the format type of my system disk from Dynamic to Basic, I took a system image using Win 7 Pro System Image Tool and deleted all the partitions on the system disk, change the format type to Basic using the Command Prompt, and restored the image. Unfortunately, the format type restored also to Dynamic.Did I missed any step? or there is something wrong?
View 3 Replies View RelatedI have been reading up on it from microsofts site as well as various places throughout the web. most articles were also a few years old might have been before windows 7 was even released.from what I understand you will only really have an issue if you are using windows 98, 2000 , xp and server 2003.What I am trying to do is make a partition but the only way to do it so it seems (I am using the admin disk management tool)is to convert to dynamic.I am creating the partition to install a small linux distro to use in dual boot but the part that is making me weary is the last step of the disk management tool says "the operation you selected will convert the selected basic disk(s) to dynamic disc(s). If you convert the disk(s) to dynamic you will not be able to start installed operating systems from any volume on the disk(s)(except the current boot volume.now I will (hopefully) never have to deal with those headaches called OS's again. So would I have any negative impact from this conversion? would i still be able to boot windows 7 with all of my data still intact?
View 8 Replies View Relatedi have a acer laptop having 500 gb hd. Isince i want to dual boot ubuntu with windows 7 i was planning to install it on Local Disk F so i shrink the Drive F for swap area required for ubuntu. I shrink it to 4500MB and new partition was created showing 4.5GB of space. Then i right click on it to create new volume. I keep on clicking next till a warning came.I click ok to that and my whole disk got converted to Dynamic disk. Now my problem is that my os is still booting even after converting to dynamic . I dont know how.
Since i have only one hd how can i use Partion wizard since i can't unallocate the whole HD.
I am building a new computer with 1TB of HDD. At first when I started to install an OS, a system volume was created automatically of 100MB size. Then I created another 200GB partition as C to install Windows 7 and 2 other partitions of 250GB. I wasn't allowed to create another one partition. After I finished windows installation, I tried to create partition in unallocated space using > New simple volume. The sytem warned me of dynamic volumes > accept it. Then eventually all 4 volumes were converted to dynamic in disk management window.
View 5 Replies View RelatedI wanted to make a new partition on my hp laptop on the only disc it hasso as to create a system image.Unfortunately,because it came with already 4 partitions I accidentally turned the disk into a dynamic disk.Now its booting normally but I cant load the system Image that I have created before the partition.Other than that the pc is running smoothly. As I said this is the only disk on the system.Is it possible to convert the disk back to basic?After a lot of googling I found some exmples but all of them assumed you had a second disk on your system.Is it possible to convert the disk back to basic without having to reinstall windows?(I have no windows cd)
View 1 Replies View Related1) What is the major difference between Dynamic and Basic Volume It seems Dynamic volume can let you change the size of the volume up or down when there is an adjacent unused physical space, without impairing the files already stored. However Partitions (Basic Volume) can only be extended, and will always requires reformating.
2) It seems that Dynamic Volume has a lot more overheads, so it may be a little slower and actual file stored will be less, any opinion on that?
I did notice one of the Dyname Volume started to show massic missing storage space, e.g. Used Space of 30GB only has 7GB realy files on it, absolutely no hidden files there because I created the volume. This happens after shrinking and expanding it up and down a couple of time, BUG?!! If so it is a serious one.
so i got this cool Hp laptop... nice the bad part ... I had a single 500 gb Hard disk. only two partitions ... experimented to partition it ... 1. I upgraded my basic drive to dynamic drive ( got four partitions now) 2. My OS (win 7 home premium x64) is on one of the partiotion on the dynamic disk. QUESTIONS How do i convert back to basic... i only have my OS key no install cd? Can i take a back up or sys image that i can use later on after converting my hard disk to basic?
View 1 Replies View RelatedI created a 20gb partition on my external hard drive and no longer require the partition. It is currently unallocated space so I want to format it into NFTS. Using computer management the partition was selected and and I went through the steps to format but i keep on getting an error message saying there is not enough space on the disk to complete this operation.
View 1 Replies View RelatedI'm a long-time reader but new poster. I am currently running Windows 7. I want to install Windows XP onto another disc and have a dual-boot setup. I keep Windows 7 up to date and secure, but for the XP partition, I would rather not have antivirus running or even installed, in order to limit background processes. I will not be logging into any place or making any credit card purchases when booted into Windows XP. It will just be used for surfing, games, etc. Further, if and when XP becomes compromised or buggy, I will simply overwrite the partition with a backup image.
If I use Bitlocker to lock down the Windows 7 partition (with the encryption key on a thumb drive) and boot into Windows XP, am I correct in thinking the XP installation see or can't access the Windows 7 partition? If XP gets compromised, can a virus access or write to the Windows 7 partition?
Is there any other reason why this would not be secure? Can a virus write to the BIOS?
I wanted to create a new partition to try out linux. So I decided to shrink E: by 20 GB. I then formatted the free space into a new drive by right clicking and creating new simple volume. I was warned that the drive would be made "simple", but not knowing the implications, I went ahead with the procedure. Now on rebooting, windows won't load. I had made a repair disc, so was able to use it to check for any start up errors. It reported none. Moreover I used "diskpart" through cmd to find volume c: is dynamic.
View 1 Replies View RelatedI had my friend Dell Laptop. He want me to create a two extra partitions in existing primary partition which is C:The HDD is 1TB in size.One hour ago I had used Dell data backup program and created recovery discs and then formatted the Laptop to factory default. I thought before formatting it will give me options to create a partitions but it did not had any option.
View 6 Replies View Related[FONT=verdana, geneva, lucida, 'lucida grande', arial, helvetica, sans-serif]I initially had 1 500gb dynamic disk, with one partition containing all my documents and windows files. I created a partition in the free space to copy my documents into so I could overwrite Windows keeping my documents intact. However I did not have enough free space for all my documents so after copying over one batch of files I shrunk the windows partition and extended my document partition. I had to repeat this again so I now have three extended document partitions.[/FONT] I then put in the windows CD, formatted the OS Recovery, SYSTEM Reserved and Windows parititions but then was unable to install Windows as it did not recognise any disks. I attempted FixMBR etc but to no avail.
I searched around and saw i may be able to change the sector hex from 42 (dynamic) to 07 (basic), but im wondering whether doing so will preserve the extended partitions i have? So my question is, will changing 42 to 07 preserve the extended partitions. Do I need to repeat for each 42 (like the link you posted) and then the three dynamic extended partitions will then become one basic partition? At the moment I can not actually see the data so have no idea how to back it up? Otherwise I would do as you say and back it up, format and copy back over.
[URL]
DISKPART: Acronis Disk Director (see documents spanned)
Active unDelete (again, three partitions)
HxD (showing 42)
So, basically im asking if i am safe to convert 42 to 07 WITHOUT losing any data?
I have a 500GB dynamic hard drive which had a Windows 7 install on it. I wanted to reinstall Windows, so from within Windows setup I formatted the system and Windows partition, leaving a partition containing documents and pictures (i was unable to delete them). From then, Windows seemed unable to recognise the disk so i searched in DISKPART and found that the disk was labelled as INVALID.
After Googling around it looks as though i can simply change the 1C02 in the hex from 42 to 07 - however, my only concern was that the documents i have on this drive are spanned across three adjacent (dynamic?) partitions - so i am concerned that by focing the disk to be basic i will lose the connection between these partitions. [URL]
DISKPART:
Acronis Disk Director (see documents spanned) Active unDelete (again, three partitions) HxD (showing 42) So, basically im asking if i am safe to convert 42 to 07 WITHOUT losing any data?
well scenario is I got my new dell 15r laptop with windows 7 basic loaded yesterday.. so backed it up and wanted to put my old PC's windows 7 ultimate version on it. I installed it, while installation it allowed to have only 4 partitions.it already had 2 partitions1) Recovery - 15gb2) something i forgot ... some 40MBso i made a partition of 125GB for OSand rest of unallocated space ie some 660gb could not be allocated in more than one partition so i let it be unallocatedso after installtion got completed and OS started i went in disk management and tried to make that unallocated space of 660GB in 2-3 partitions.but it converted all my previous partitions also to dynamic. even recovery partitions.ow do i go back to basic partitions?? particularly about that recovery partition and my C: (OS partition) ??
View 7 Replies View Related