Convert Windows 7 Boot Partition Into A Dynamic Disk
Oct 12, 2012my hard disk converted to dynamic.now it is not booting, it have 300 gb data .i need convert in to basic and working normally.
View 2 Replies
ADVERTISEMENT
Convert Windows 7 Boot Partition Into A Dynamic Disk?
Aug 24, 2009I want to setup a Raid 1 mirror from one drive to another using Windows software raid. I know in XP you could not do this on the boot partition (C drive). Is it possible to do this in Windows 7?
View 2 Replies View RelatedCan't Convert Dynamic Disk To Basic Disk
Jun 6, 2012Last night as I was attempting to install Windows 8 RP to test it out, I decided I would do a dual boot incase I didn't like it. It downloaded, burned fined and I went to make a new partition, and this is where things went south for me. It converted every disk to dynamic once I had created the new disk to install it on and for the life on me I can't get it to convert back to basic, so I'm pretty well screwed if something goes wrong. Things I've done:
1) Attempt system restore - Ok, so I didn't have a restore point created so this is of no help.
2) I followed this guide found here on SevenForums and attempted all 3 methods - nothing worked Convert a Dynamic Disk to a Basic Disk
3) I downloaed EaseUse Partition master to attempt to change dynamic back to basic, and still a no go.
4) Tried to install Windows 8 again and it would not let me delete the current dynamic disk partitions to start over
5) Tried HP recovery tools to set the computer back to factory condition and it wouldn't work.
Is it possible to delete everything and start over from scratch or will it still be dynamic? At this point, i want a time machine so I can go back before ever attempting to make a dual boot.
Convert A Basic Disk To A Dynamic Disk
Sep 29, 2009How to Convert a Basic Disk to a Dynamic Disk ?
View 0 Replies View RelatedConvert A Dynamic Disk To A Basic Disk
Jan 11, 2010How to Convert a Dynamic Disk to a Basic Disk ?
View 0 Replies View RelatedPartitioning - Operation You Selected Will Convert Basic Disk To Dynamic
Sep 27, 2012When I am trying to partition new drive from C drive. My C drive have 450 GB Space, so wanted to make a new drive of 250 GB. Did the basic steps but when clicking on Finish I get the following error "The operation you selected will convert the selected basic disk(s) to dynamic disk(s). If you convert the disk(s) to dynamic, you will not be able to start installed operating systems from any volume on the disk(s) (except the current boot volume). Are you sure you want to continue?".
View 1 Replies View RelatedDynamic Disk To Basic Disk When Windows 7 Is Installed On Dynamic Disk
Mar 13, 2011so i got this cool Hp laptop... nice the bad part ... I had a single 500 gb Hard disk. only two partitions ... experimented to partition it ... 1. I upgraded my basic drive to dynamic drive ( got four partitions now) 2. My OS (win 7 home premium x64) is on one of the partiotion on the dynamic disk. QUESTIONS How do i convert back to basic... i only have my OS key no install cd? Can i take a back up or sys image that i can use later on after converting my hard disk to basic?
View 1 Replies View RelatedWindows 7 Does Not Boot From Dynamic Disk?
Oct 8, 2012i changed my disk partitions as dynamic disks in windows 7 home basic (accidently) After i install windows 7 ultimate. It cannot boot from dynamic disk. it shows blank screen. What can i do. how do i recover it. my system cannot boot.
View 2 Replies View RelatedWindows 7 Ultimate Unable To Boot From Dynamic Hard Disk?
Apr 16, 2012somehow my hard disk partition became dynamic. i formatted system and insttaled windows 7 ultimate in the dynamic disk partition. from then onwards system is not booting. only black screen with cursor on the upper left corner of the black screen.
if i am not wrong windows 7 cannot boot with dynamic disk. i will have to go to the disk management and after conversion of dynamic disk to basic disk with deleting all the volumes (data). it is possible to boot with windows 7.
but system is not booting...not opening..so i cannot go to disk management.
hrad disk is showing some partitions with system reserved. except system reserved all the partitions are shwoing dynamic. and in only one partition formatting option and installing OS option is coming while i booting system with OS DVD.
reinstalltion through OS DVD is possble by booting through OS DVD. but in advanced option repartition option is not coming. the one partition in which i installed OS previously, only in that formatting option is coming. in other partition neither formating option is coming nor extend.
Convert Dynamic To Basic Disc
Apr 22, 2012I wanted to make a new partition on my hp laptop on the only disc it hasso as to create a system image.Unfortunately,because it came with already 4 partitions I accidentally turned the disk into a dynamic disk.Now its booting normally but I cant load the system Image that I have created before the partition.Other than that the pc is running smoothly. As I said this is the only disk on the system.Is it possible to convert the disk back to basic?After a lot of googling I found some exmples but all of them assumed you had a second disk on your system.Is it possible to convert the disk back to basic without having to reinstall windows?(I have no windows cd)
View 1 Replies View RelatedHow To Convert Offline Dynamic Drive To Online
Jul 16, 2011my old hard drive is not displayed in my computer. But it is displayed as "Dynamic and offline" in computer managment. I have some important data to recover?how I can convert to online so as to recover the data.
View 1 Replies View RelatedDelete Dual Boot Ubuntu Partition And Convert To Primary Hard Drive C:?
Mar 14, 2012I installed Ubuntu on a older Toshiba laptop. When I boot up it asks me to select either Windows 7 or Ubuntu. I want to get rid of the Ubuntu disk partition and give that 2.9 GB space to my primary hard drive. I go into compmgmt.msc but I can't execute any commands on that disk partition.
View 3 Replies View RelatedWay To Convert Dynamic Drive To Basic Without Losing Data?
Oct 24, 2012I've 4 Partition created on my Hard Drive..!!1. System Usable Partition (Reserved for System by its own)2. Local Partition (In which Windows is Installed)3. Another Partition (for Storage purpose)4. One more Partition (for Storage purpose)So, when today I tried to shrink my one of the partition (except system usable & C Drive/Local Drive) the the Windows alerted me with the Message : "Your Operating System won't boot after changing the drive to Dynamic Drive" ....!!After this message appears I clicked yes..!!The partition is been made
View 10 Replies View RelatedConvert Dynamic Drive To Basic Without Losing Data?
Jan 19, 2013after shrinking my hard drive it has changed to dynamics and i cant even install windows on a different disk,what shuold i do?
View 2 Replies View RelatedChanging A Dynamic Partition To A Basic Partition?
Mar 16, 2012i have a hp laptap with a core i3 . with 8gig of ram. 500 gig hard drive. i made a 100 gig partion and it went to dynamic changing it back to basic. i read the mini tools application. if i tried that would it erase my hard drive if i went back to basic. all i wanted was a back up for my files.
View 1 Replies View RelatedHow To Delete Dynamic Partition In Windows 7
Jun 19, 2012i was using hp g42 laptop i was delete the hp tools partition.in this situation the total os was crashed and i lose the total data how can iget the data?
View 2 Replies View RelatedInstall Windows 7 On A Software Raid 0 MBR Dynamic Partition?
Jul 30, 2011I have seen this question being asked a few times already. I just bought 2xSamsung Spinpoint F3 1TB drives and I created a dynamic striped partition with MBR in comuter management. If I try to install win 7, after dvd boot-up, will I be able to select the partition and install windows on it ? I know all about the advantages and disadvantages of using software raid 0. But, my question is simple. Can you just install an O/S on that type of partition (will it be detectable?) or do I have to buy a "fake raid" controller or boot some type of application first to make it detectable everytime I boot up my computer?
View 2 Replies View RelatedDynamic Disk In Windows 7?
Oct 10, 2012I have been using computers for a while but just recently started to learn what is really going on. I am having trouble understanding what a dynamic disk is. I have read a lot online but I need a very very simple explanation as I am an older person and a lot of the explanations I read online use technical terms which I also do not understand. I think what I have is a basic disk and I don't understand what a dynamic disk is. Can you have a dynamic disk if you have just a single regular physical disk, and if so what is the advantage.
View 3 Replies View RelatedConvert Dynamic Disc Back To Basic On The Only System Disc?
Apr 22, 2012I wanted to make a new partition on my hp laptop on the only disc it as.Unfortunately,because it came with already 4 partitions I accidentally turned the disk into a dynamic disk.Now its booting normally but I cant load the system Image that I have created before the partition.Other than that the pc is running smoothly.As I said this is the only disk on the system.Is it possible to convert the disk back to basic?After a lot of googling I found some exmples but all of them assumed you had a second disk on your system.Is it possible to convert the disk back to basic without having to reinstall windows?(I have no windows cd
View 4 Replies View RelatedDynamic Disk Creation In Windows 7 X64
Sep 14, 2011I have 2 x 750GB HDD's running Windows 7 x64. One of the HDD's contains data the other is blank. Do I have to format the drive with data on it to convert both drives to being a Dynamic Disk? I don't have a backup drive to move the data to whilst I create a Dynamic Disk so hopefully the answer is no?
View 2 Replies View RelatedCreate New Disk Parition Dynamic Disk Only
Mar 1, 2012I'm trying to create a new disk partition so that I can install Windows 8 (Consumer Preview) on it. However, I'm running into an issue here. When I go to create the partition, I get to the final step and this is what I run into (see image below).I'm thinking of just leaving the space unallocated and formatting it when I do my install of 8, but then I'm afraid that might render my Windows 7 partition unbootable. Will that happen?
View 1 Replies View RelatedInvalid Dynamic Disk Detection In Windows 7?
Oct 20, 2012I recently took my internal hard drive and bought a casing for it and made it external. But when i connected it to my computer the disk management showed it as invalid dynamic. So i went online, read a bit about basic and dynamic and ways to convert the latter into former. I adopted the method of converting through changing "hex" using "HxD". Now when i changed the '47's to '07' , i got back my three partitions without any data loss one of which was system reserve. I do not know how to get the rest back. cannot loose the data. I have to get the other three back. Total no of partition =6 (including system reserve) No. of partitions recovered = 3 (including system reserve) No
View 1 Replies View RelatedWindows 7 Not Booting After Conversion To Dynamic Disk
May 2, 2010Ive squeezed all my brain juices out to no avail. [code] Ive been trying to set up software mirrored raid on my two HDs.I setup Win 7 as a clean install and then convert disk 0 to a dynamic disk. After that when i restart my comp, it just wont boot. Im left with the DMI pool data thing and a blinking cursor.
View 9 Replies View RelatedDon't Wanna Use The Whole Disk For Boot Partition
Aug 1, 2012Got a 1.5 tb Sata seagate and I've heard win7 has probs with drives this size when they're the boot drive. But in the "where do you want to install windows" screen in advanced options there seems to be no way to make a partition just for windoze7; only options that ain't ghosted are delete and format. Sensibly a three- or four-hundred gig partition on this large HD should work for a boot drive but I'm jiggered if I can figure out how to do it; even though it obviously doesn't need all the space, the only option it gives me is to install to this one big Disk 0 Partition 2.(Partition 1 is the 100mb "system reserved" ).
View 12 Replies View RelatedWindows 7 Ultimate Not Booting After Conversion To Dynamic Disk?
Apr 2, 2012somehow my hard disk partition became dynamic. i formatted system and insttaled windows 7 ultimate in the dynamic disk partition.from then onwards system is not booting. only black screen with cursor on the upper left corner of the black screen.if i am not wrong windows 7 cannot boot with dynamic disk. i will have to go to the disk management and after conversion of dynamic disk to basic disk with deleting all the volumes (data). it is possible to boot with windows 7.but system is not booting...not opening..so i cannot go to disk management.hrad disk is showing some partitions with system reserved.except system reserved all the partitions are showing dynamic. and in only one partition formatting option and installing OS option is coming while i booting system with OS DVD.reinstalltion through OS DVD is possible by booting through OS DVD. but in advanced option repartition option is not coming.the one partition in which i installed OS previously, only in that formatting option is coming.in other partition neither formating option is coming nor extend.
View 5 Replies View RelatedWindows 7 Ultimate Not Booting After Conversion To Dynamic Disk
Apr 2, 2012Somehow my hard disk partition became dynamic. i formatted system and insttaled windows 7 ultimate in the dynamic disk partition.from then onwards system is not booting. only black screen with cursor on the upper left corner of the black screen.if i am not wrong windows 7 cannot boot with dynamic disk. i will have to go to the disk management and after conversion of dynamic disk to basic disk with deleting all the volumes (data). it is possible to boot with windows 7..
View 3 Replies View RelatedWindows 7 Ultimate Not Booting After Conversion To Dynamic Disk
Apr 3, 2012somehow my hard disk partition became dynamic. i formatted system and insttaled windows 7 ultimate in the dynamic disk partition.
from then onwards system is not booting. only black screen with cursor on the upper left corner of the black screen.
if i am not wrong windows 7 cannot boot with dynamic disk. i will have to go to the disk management and after conversion of dynamic disk to basic disk with deleting all the volumes (data). it is possible to boot with windows 7.
but system is not booting...not opening..so i cannot go to disk management.
hrad disk is showing some partitions with system reserved. except system reserved all the partitions are shwoing dynamic. and in only one partition formatting option and installing OS option is coming while i booting system with OS DVD.
reinstalltion through OS DVD is possble by booting through OS DVD. but in advanced option repartition option is not coming. the one partition in which i installed OS previously, only in that formatting option is coming. in other partition neither formating option is coming nor extend.
Dynamic Volume To Primary Partition
Apr 6, 2011I'm currently running Win XP Pro. on dynamic disks with the system partition mirrored.I have a 20GB simple volume on one of the dynamic disks which I had intended to install a copy of Windows 7 Enterprise on, intending to dual-boot as I changed over from XP to 7, but it appears that you can't install Windows 7 on a dynamic disk as "setup cannot find a location for temporary files." According to Microsoft my only option is to revert the existing dynamic disk/s to basic - losing everything on it including my XP installation.Microsoft says not to mix volumes and partitions on the same disk, but a third party application called Dynamic Disk Converter claims to be able to change simple volumes back to primary partitions - though it isn't clear from the documentation if this can be done to just one volume out of several on a dynamic disk.My options appear to be:
1. Get another hdd for Windows 7.
2. Break the XP mirror and convert one dynamic disk back to basic for Windows 7 - losing my RAID protection
3. Ignore Microsoft's advice and see if Dynamic Disk Converter actually can convert a simple volume back to a primary partition, risking my whole installation.
Change Dynamic System Partition To Basic?
Aug 13, 2012i got only one disk and all of the partitions are dynamic i have low space on the system files partition so i decided to extend the partition i deleted a partition and had an unallocated space but i couldnt extend the the system partition i tried to install windows but it couldnt install on a dynamic disk
View 2 Replies View RelatedBoot Sector For System Disk Partition Is Corrupt?
Jan 15, 2013My wife shout down her computer this morning took it on remote location for work today but never booted it up. When she got back home tonight it wouldn't boot up. I don't know what to call these screen but some Startup Repair screen. Just says Repair action: Boot sector repair, Result: Failed.I downloaded and burned to CD the boot CD for the MiniTool Partition Wizard Home Edition but I don't know what disk I am even looking for. I see 3 partitions listed for one disk.The only one with a label is BDEDrive and it's 300 MB. The other two have *: as what I would call a label. One is 297.79 GB and the other is 12.34 MB. The BDEDrive is the only with with status of Active. NTFS on that partition and Other on the big partition.
View 7 Replies View RelatedFail To Format Disk 0 Partition 2 After Trying To Boot From Cd Drive
Apr 29, 2012basically a bad partition will not allow me to wipe the computer clean, boot XP from the drive or add/change bios screen...i don't have tje kind of cash to buy or pay for repairs. what can i do?
View 1 Replies View Related