Windows 7 Ultimate Unable To Boot From Dynamic Hard Disk?
Apr 16, 2012
somehow my hard disk partition became dynamic. i formatted system and insttaled windows 7 ultimate in the dynamic disk partition. from then onwards system is not booting. only black screen with cursor on the upper left corner of the black screen.
if i am not wrong windows 7 cannot boot with dynamic disk. i will have to go to the disk management and after conversion of dynamic disk to basic disk with deleting all the volumes (data). it is possible to boot with windows 7.
but system is not booting...not opening..so i cannot go to disk management.
hrad disk is showing some partitions with system reserved. except system reserved all the partitions are shwoing dynamic. and in only one partition formatting option and installing OS option is coming while i booting system with OS DVD.
reinstalltion through OS DVD is possble by booting through OS DVD. but in advanced option repartition option is not coming. the one partition in which i installed OS previously, only in that formatting option is coming. in other partition neither formating option is coming nor extend.
View 9 Replies
ADVERTISEMENT
May 26, 2012
I formatted and installed windows 7 64 bit in a pc which previously had windows 7 32 bit. When i booted my 1tb dynamic disk was not detected. So I went into disk management and it had listed my disk as "Foreign Disk". So i imported the foreign disk.
The drive was detected and opened. So i rebooted the pc but now the drive is still not appearing in my computer. When i go to disk management the 1tb appears but there is no drive letter assigned. When i try to assign drive letter it statest that "Specified File cannot be found"
View 1 Replies
View Related
Apr 2, 2012
somehow my hard disk partition became dynamic. i formatted system and insttaled windows 7 ultimate in the dynamic disk partition.from then onwards system is not booting. only black screen with cursor on the upper left corner of the black screen.if i am not wrong windows 7 cannot boot with dynamic disk. i will have to go to the disk management and after conversion of dynamic disk to basic disk with deleting all the volumes (data). it is possible to boot with windows 7.but system is not booting...not opening..so i cannot go to disk management.hrad disk is showing some partitions with system reserved.except system reserved all the partitions are showing dynamic. and in only one partition formatting option and installing OS option is coming while i booting system with OS DVD.reinstalltion through OS DVD is possible by booting through OS DVD. but in advanced option repartition option is not coming.the one partition in which i installed OS previously, only in that formatting option is coming.in other partition neither formating option is coming nor extend.
View 5 Replies
View Related
Apr 2, 2012
Somehow my hard disk partition became dynamic. i formatted system and insttaled windows 7 ultimate in the dynamic disk partition.from then onwards system is not booting. only black screen with cursor on the upper left corner of the black screen.if i am not wrong windows 7 cannot boot with dynamic disk. i will have to go to the disk management and after conversion of dynamic disk to basic disk with deleting all the volumes (data). it is possible to boot with windows 7..
View 3 Replies
View Related
Apr 3, 2012
somehow my hard disk partition became dynamic. i formatted system and insttaled windows 7 ultimate in the dynamic disk partition.
from then onwards system is not booting. only black screen with cursor on the upper left corner of the black screen.
if i am not wrong windows 7 cannot boot with dynamic disk. i will have to go to the disk management and after conversion of dynamic disk to basic disk with deleting all the volumes (data). it is possible to boot with windows 7.
but system is not booting...not opening..so i cannot go to disk management.
hrad disk is showing some partitions with system reserved. except system reserved all the partitions are shwoing dynamic. and in only one partition formatting option and installing OS option is coming while i booting system with OS DVD.
reinstalltion through OS DVD is possble by booting through OS DVD. but in advanced option repartition option is not coming. the one partition in which i installed OS previously, only in that formatting option is coming. in other partition neither formating option is coming nor extend.
View 3 Replies
View Related
Nov 26, 2012
i can not install dual-both window7 and window8 on my computer.i think that may be my hard is dynamite.not basic.
View 13 Replies
View Related
Mar 13, 2011
so i got this cool Hp laptop... nice the bad part ... I had a single 500 gb Hard disk. only two partitions ... experimented to partition it ... 1. I upgraded my basic drive to dynamic drive ( got four partitions now) 2. My OS (win 7 home premium x64) is on one of the partiotion on the dynamic disk. QUESTIONS How do i convert back to basic... i only have my OS key no install cd? Can i take a back up or sys image that i can use later on after converting my hard disk to basic?
View 1 Replies
View Related
Oct 8, 2012
i changed my disk partitions as dynamic disks in windows 7 home basic (accidently) After i install windows 7 ultimate. It cannot boot from dynamic disk. it shows blank screen. What can i do. how do i recover it. my system cannot boot.
View 2 Replies
View Related
Jul 25, 2012
somehow my hard disk partition became dynamic. i formatted system and insttaled windows 7 ultimate in the dynamic disk partition. from then onwards system is not booting. only black screen with cursor on the upper left corner of the black screen.
if i am not wrong windows 7 cannot boot with dynamic disk. i will have to go to the disk management and after conversion of dynamic disk to basic disk with deleting all the volumes (data). it is possible to boot with windows 7.
but system is not booting...not opening..so i cannot go to disk management. hrad disk is showing some partitions with system reserved. except system reserved all the partitions are shwoing dynamic.
and in only one partition formatting option and installing OS option is coming while i booting system with OS DVD. reinstalltion through OS DVD is possble by booting through OS DVD. but in advanced option repartition option is not coming.
the one partition in which i installed OS previously, only in that formatting option is coming. in other partition neither formating option is coming nor extend.
View 2 Replies
View Related
Aug 24, 2009
I want to setup a Raid 1 mirror from one drive to another using Windows software raid. I know in XP you could not do this on the boot partition (C drive). Is it possible to do this in Windows 7?
View 2 Replies
View Related
Oct 12, 2012
my hard disk converted to dynamic.now it is not booting, it have 300 gb data .i need convert in to basic and working normally.
View 2 Replies
View Related
Sep 4, 2011
I have an external 3TB hard drive, USB. I used a mac to partition it, 2.25TB is HFS+ (Mac OS extended - journaled) and the other is 490gb NTFS (to use on windows). It would not give me the option to use MBR (master boot record) so i used the GUID table. It works fine on macs, but windows tells me i need to reformat it. It is my understanding that most all 64bit versions of windows can read/write a GUID disk. I do not need to boot off of the drive. this is another addition to the list of "why i hate windows"
View 6 Replies
View Related
Apr 1, 2011
i've been checking everywhere for some info and my problem doesn't seem like anyone elses. i just recently repartitioned my hdd usuing gnome partitioner and reformated to unformated to install windows 7. I've set my boot menu to boot off the disk drive, but when i put the windows 7 disk in it says to insert a bootable disk.
View 9 Replies
View Related
Apr 28, 2012
i have a question: Can you use a Vista Ultimate disk to boot into a Windows 7 recovery partition. What i am attempting is to fix MBR in windows 7 but i don't have a Windows 7 disk and no one i know has one. My 7 wont boot at all but it should with a recovery disk. So can i use the Vista disk to boot to 7's recovery options ?
View 1 Replies
View Related
Jun 19, 2010
I have windows 7 ultimate and for what ever reason when starting my laptop (HP DV62114tx) Im being requested to enter in the bitlocker key. Now here is the issue, the bitlocker key is on the desktop. (silly me)
Im wanting to know if there is any way to either retrieve the key or is there an over ride code for bitlocker so I can log in to my laptop.
I think moving forward, I will not use Bitlocker or look for an alternate solution, that is once I get the Laptop running again.
View 12 Replies
View Related
Mar 29, 2012
im usin 2tb segate new hard disk sir..in my system i cant able to boot my os and also my hard disk...its showin that hard disk boot failure insert system disk press enter ...i restarted many times its sayin the same problem...in my gigabite mobo bios my hard disk is not get detected sir....the problem is that wen im installin the new os for 2nd time its all went nice only sir but at the completion of the os it wil ask for the user name and password but in my system its frozen sir fully of black screen and i cant able to do anythin so i restarted my system from that im gettin this error as hard disk boot failure insert system disk press enter.....that my new hard disk and all of my data is in that hard disk only..this problem arises wen im installing the os for 2nd time sir.
View 6 Replies
View Related
Nov 11, 2012
Originally got message - Disk read error occurred press ctl alt del to restart. Then tried plugging this drive using a USB connector into my desktop PC to see if I could run some chkdsk. Then my desktop PC displayed messages telling me my firewall and virus software had been turned off and the computer crashed. ROOTKIT? So I was left with 2 drives not working. I re installed windows on desktop but using ISO on flash drive BUT can't on the 500GB Hitachi HTS545050B9SA00 for some reason. Windows setup loaded and Deleted old partitions and formatted. When I tried to install, it froze. It now just boots up with a windows loading screen and I'm also unable to boot from flash drive as it freezes. This is on a Sony Vaio VPCEB4E4E.
View 2 Replies
View Related
Oct 10, 2012
I have been using computers for a while but just recently started to learn what is really going on. I am having trouble understanding what a dynamic disk is. I have read a lot online but I need a very very simple explanation as I am an older person and a lot of the explanations I read online use technical terms which I also do not understand. I think what I have is a basic disk and I don't understand what a dynamic disk is. Can you have a dynamic disk if you have just a single regular physical disk, and if so what is the advantage.
View 3 Replies
View Related
Aug 8, 2012
I have bought a new laptop (DOS installed) and trying to install windows7 After i installed windows 7, i can see only 30 gb drive in "My computer" (500 gb hard disk) When iam trying to create new volume in disk management on unallocated space iam getting a prompt that "this action will convert the disk to dynamic disk" when i proceeded with clicking ok i get an error message saying "Not enough space on the disk to perform the operation" Even in the windows installation screen iam unable to select the unallocated space and format. I can see the options "format", "delete" disabled for the partitions I can see the options enabled for only few partitions. This is a brand new laptop with DOS installed and iam installing the windows for first time.how can i partition the hard disk and format?
View 3 Replies
View Related
Aug 8, 2012
I have bought a new laptop (DOS installed) and trying to install windows7After i installed windows 7, i can see only 30 gb drive in "My computer" (500 gb hard disk)When iam trying to create new volume in disk management on unallocated spaceiam getting a prompt that "this action will convert the disk to dynamic disk"when i proceeded with clicking ok i get an error message saying "Not enough space on the disk to perform the operation"Even in the windows installation screen iam unable to select the unallocated space and format.I can see the options "format", "delete" disabled for the partitionsI can see the options enabled for only few partitions.This is a brand new laptop with DOS installed and iam installing the windows for first time.
View 9 Replies
View Related
Sep 14, 2011
I have 2 x 750GB HDD's running Windows 7 x64. One of the HDD's contains data the other is blank. Do I have to format the drive with data on it to convert both drives to being a Dynamic Disk? I don't have a backup drive to move the data to whilst I create a Dynamic Disk so hopefully the answer is no?
View 2 Replies
View Related
Jun 6, 2012
Last night as I was attempting to install Windows 8 RP to test it out, I decided I would do a dual boot incase I didn't like it. It downloaded, burned fined and I went to make a new partition, and this is where things went south for me. It converted every disk to dynamic once I had created the new disk to install it on and for the life on me I can't get it to convert back to basic, so I'm pretty well screwed if something goes wrong. Things I've done:
1) Attempt system restore - Ok, so I didn't have a restore point created so this is of no help.
2) I followed this guide found here on SevenForums and attempted all 3 methods - nothing worked Convert a Dynamic Disk to a Basic Disk
3) I downloaed EaseUse Partition master to attempt to change dynamic back to basic, and still a no go.
4) Tried to install Windows 8 again and it would not let me delete the current dynamic disk partitions to start over
5) Tried HP recovery tools to set the computer back to factory condition and it wouldn't work.
Is it possible to delete everything and start over from scratch or will it still be dynamic? At this point, i want a time machine so I can go back before ever attempting to make a dual boot.
View 4 Replies
View Related
Mar 1, 2012
I'm trying to create a new disk partition so that I can install Windows 8 (Consumer Preview) on it. However, I'm running into an issue here. When I go to create the partition, I get to the final step and this is what I run into (see image below).I'm thinking of just leaving the space unallocated and formatting it when I do my install of 8, but then I'm afraid that might render my Windows 7 partition unbootable. Will that happen?
View 1 Replies
View Related
Sep 29, 2009
How to Convert a Basic Disk to a Dynamic Disk ?
View 0 Replies
View Related
Jan 11, 2010
How to Convert a Dynamic Disk to a Basic Disk ?
View 0 Replies
View Related
Apr 10, 2011
Damn Windows Update started installing a video card driver. My system is a Dell Vostro 430 and has an ATI HD 4350 (I think), but however, for some stupid reason it can only work with Dell's video driver. So when Windows Update installed the official driver for me, by the time I realised what it was doing it was too late. My screens went black; an incompatible driver screwed everything up.
Worse yet, it was still installing updates, so I was scared to turn my computer off in case it would create major problems. After waiting for four hours I decided it was time to pull the plug. After restarting the computer, it kept rebooting when it started loading Windows 7, and then soon after it didn't even get that far; it told me there was no compatible SATA device found and it refused to boot full stop. Trust this to happen at assignment hand-in week. I've got so much work to do.
I went to the library and downloaded an Ubuntu ISO and burned it to disc. I also got a legit ISO (I'm a student and use MSDN) of Windows 7 x86, since Windows 7 x64 had its problems with the software I use for my course. First of all I backed up all of my uni work using Ubuntu as a live CD, which worked okay. I moved other important data from my Windows (main) partition to my other partitions (Music, Games, TV/Films, etc) since I knew I was going to be formatting my system partition for a reinstallation.
I have two HDs installed. A 500GB one and a 1.5TB one. The drives seem to still be working since I could access them in Ubuntu. However, most of the partitions were formatted as dynamic partitions, not basic. It seemed that the partitions on my 500GB drive were basic, whereas the ones on my 1.5TB were dynamic. This is why it disallowed me to install Windows 7 on the 1.5TB drive. (It dislikes dynamic partitions for whatever reason.) However, I formatted the original basic system partition and started installing Windows 7 x86 on it. It got to 100% and was finalising installation, until it halted, told me the installation had failed, and that I'd need to restart and try again. Every time I have tried, it has failed at that point.
I don't know what the heck to do. I can't remove the partitions that exist because they contain a lot of data that I really want. I also have no means of backing up the data. I have no DVD discs left (and it would take a damn lot to back up hundreds of gigs), and no external HDs. Just for the sake of trying it out, I tried installing 7 x64 and got the same error, so I don't think it's x86-specific.
View 5 Replies
View Related
Mar 7, 2012
My SONY VAIO VPCEB15FX laptop has been getting the S.M.A.R.T failures. I checked with SONY and since my laptop is more than 12 months old - could not get them to help me with this issue without paying (laptop started having issues exactly after 15 months- not so good for a branded laptop). So i thought i will try to handle this myself, created the recovery discs, repair disk and backed up all the data in 15 DVDs. I bought a WD Scorpio Blue hard drive (WD5000BPVT - Advanced Format Drive) and replaced the same in my laptop and started off with the recovery discs. I chose to restore complete system and it proceeded. Once it completed the process - the system restarted and the OS Setup began - now comes the issue. When the setup started it throws this error "Windows setup could not configure Windows to run on this computer's Hardware" I ordered the SONY recovery discs - repeated the above RESTORE process - but still facing the same error?
View 9 Replies
View Related
May 19, 2012
unable to access external hard disk?
View 2 Replies
View Related
Mar 2, 2012
I converted my 500 gb hard disk to DYNAMIC DRIVE. now my windows 7 won't boot from hard disk. what will i do?? is there any way i can recover my files..??
View 8 Replies
View Related
Jun 20, 2012
i bought a new bigger hard disk.used easyus todo backup to clone my windows partition to the newer hard disk so i can have more space.used EasyBCD to configure boot stuff to new hard disk and made a new entry in the OS .in my old windows.windows cloned new hard disk windows ( which i wanna use i used EasyBCD to boot the A: windows .in that windows the new hard disk windows and old windows still AND moreover all my programs non windows stuff are being run from C: and windows is being used from i dont want to disconnect hard disks . is there anyway so i can move on to new windows and then delete the old smaller partition for storage space
View 2 Replies
View Related
Oct 20, 2012
I recently took my internal hard drive and bought a casing for it and made it external. But when i connected it to my computer the disk management showed it as invalid dynamic. So i went online, read a bit about basic and dynamic and ways to convert the latter into former. I adopted the method of converting through changing "hex" using "HxD". Now when i changed the '47's to '07' , i got back my three partitions without any data loss one of which was system reserve. I do not know how to get the rest back. cannot loose the data. I have to get the other three back. Total no of partition =6 (including system reserve) No. of partitions recovered = 3 (including system reserve) No
View 1 Replies
View Related
