Boot Old Windows 7 From New Hard Disk?
Jun 20, 2012
i bought a new bigger hard disk.used easyus todo backup to clone my windows partition to the newer hard disk so i can have more space.used EasyBCD to configure boot stuff to new hard disk and made a new entry in the OS .in my old windows.windows cloned new hard disk windows ( which i wanna use i used EasyBCD to boot the A: windows .in that windows the new hard disk windows and old windows still AND moreover all my programs non windows stuff are being run from C: and windows is being used from i dont want to disconnect hard disks . is there anyway so i can move on to new windows and then delete the old smaller partition for storage space
View 2 Replies
ADVERTISEMENT
Mar 29, 2012
im usin 2tb segate new hard disk sir..in my system i cant able to boot my os and also my hard disk...its showin that hard disk boot failure insert system disk press enter ...i restarted many times its sayin the same problem...in my gigabite mobo bios my hard disk is not get detected sir....the problem is that wen im installin the new os for 2nd time its all went nice only sir but at the completion of the os it wil ask for the user name and password but in my system its frozen sir fully of black screen and i cant able to do anythin so i restarted my system from that im gettin this error as hard disk boot failure insert system disk press enter.....that my new hard disk and all of my data is in that hard disk only..this problem arises wen im installing the os for 2nd time sir.
View 6 Replies
View Related
Mar 2, 2012
I converted my 500 gb hard disk to DYNAMIC DRIVE. now my windows 7 won't boot from hard disk. what will i do?? is there any way i can recover my files..??
View 8 Replies
View Related
Nov 21, 2012
My computer had a problem with the Board so I am trying to boot the hard disk (the O.S is Windows 7) in a diferent computer but when it Shows the Welcolme Screen I always get blue screen. The other computer is a diferent model but I had done this before With Windows XP and it Worked with some drivers problems but It worked.
View 5 Replies
View Related
Jun 7, 2012
i did notice that at every boot , Windows 7 spins up my hard disk during the boot
can i avoid this? and my boot is slower
View 3 Replies
View Related
Apr 16, 2012
somehow my hard disk partition became dynamic. i formatted system and insttaled windows 7 ultimate in the dynamic disk partition. from then onwards system is not booting. only black screen with cursor on the upper left corner of the black screen.
if i am not wrong windows 7 cannot boot with dynamic disk. i will have to go to the disk management and after conversion of dynamic disk to basic disk with deleting all the volumes (data). it is possible to boot with windows 7.
but system is not booting...not opening..so i cannot go to disk management.
hrad disk is showing some partitions with system reserved. except system reserved all the partitions are shwoing dynamic. and in only one partition formatting option and installing OS option is coming while i booting system with OS DVD.
reinstalltion through OS DVD is possble by booting through OS DVD. but in advanced option repartition option is not coming. the one partition in which i installed OS previously, only in that formatting option is coming. in other partition neither formating option is coming nor extend.
View 9 Replies
View Related
Aug 5, 2011
I've just bought Seagate Momentus XT 500GB and installed it myself to desktop. Downloaded DiskWizard from Seagate to clone my old hard disk into the new one.
Problem: How do I boot from the new hard disk? I still got my old hard disk on my computer, I'm trying to use it as extra storage, but it's still booting from the old C drive. How do I change it to boot from my new hard disk?
View 4 Replies
View Related
Dec 28, 2012
If I have one computer and I have two hard disk (Hard disk A and Hard disk B) and then installed Windows 7 on both hard disk one at a time using the same computer, will be I able to boot from Hard disk A and then shut down the computer, then replace Hard disk A with Hard Disk B?
View 3 Replies
View Related
Jun 14, 2012
Compaq presario with Vista. Trying to do a clean install of windows 7 on comapq presario f500. Problem is the machine will only boot from hard drive. Cd drive works fine just can't boot from it. Windows 7 install disk won't boot. Windows xp install cd won't boot. In bios setup I've move the dvd/cdrom drive to top of boot list still no luck. So I got tricky booted from vista and starting windows 7 install cd from windows explorer. Install hung part way through and I had to turn off the computer. No I can't boot vista and have an incomplete install of windows 7 which won't boot. Not even safe mode. When you boot hit Esc the boot menus only shows notebook hard drive as an option. I've also tried unpluging the battery to clear out.
View 6 Replies
View Related
Nov 3, 2011
Every time I boot up or wake up from Sleep mode my hard disk hunts for about 10 minutes probably updating files. This seriously slows down my system. I use the Microsoft virus checker, and the Microsoft Backup utility. Could it be one of these, or some other software, and if so how can I locate it and then stop it?
View 7 Replies
View Related
Jun 8, 2011
I reinstalled my hp notebook after getting message boot disk not found (3F0). I am running System Type x64 hp pavilion Dv7 with a AMD Phenom P840 Triple Core Processor.After restoring it from the recovery disk to.. from box condition and reloading all updates and drivers system still gives me the same message. The first time i reinstalled it to factory default and it didn't work. That is why the second time I did the from the box installation. I think I have created more than one operating system now and I don't know how to fix the problem. When it was originally loaded from Staples in January this year it wasn't really running great but I thought it was just my wireless connection was slow. Then it started to take a long time to do anything, on or offline. I went into the updates history from Microsoft and noticed that the first 14 updates they did failed. One of them was for display amd M880G with ati mobility. The computer began lagging worse and worse and starting to become unstable. That was when i decided to run the recovery disk not knowing that it was creating more hard disks. The message is back and now there is more than one hard disk and the last one i did was complete and all updates drivers were successful. I am still getting the boot devise not found message and sometimes it won't start at all.
View 11 Replies
View Related
Dec 23, 2011
can an OS be changed from low high,example wind.xp[default] to windows 7?
View 1 Replies
View Related
Apr 22, 2012
I recently bought a lop top and have seen the blue s reen 3 times. When downloading AVG anti virus a start up test popped up and said boot drive not found also said Hard disk (3FO) not found please help me fix and down load drivers that I need.
View 5 Replies
View Related
Oct 17, 2009
Background:-
System Gigabyte X48T, 4G ram, usual bits. Video
Sata Port 0&1 - Gigaraid 2x 750G Raid 0 - Scsii disk Boot.
Sata ports 2&3, 4&5, 6, - 5x 500G 2TB dynamic GPT Raid 5
Sata Port 7 -1x 750G Roms & software disk.
Rocket Raid Scsii 0_1, 5x1TB in raid 5.
Scsii 0_0, 1x500G JBOD.
Problem is here.
I have been trying to get this system ready to do extensive HD video editing and multimedia work so thumbnails are critical to sorting out 1000's of clips. Vista just doesnt show thumbnails. I have been waiting years for Windows 7.
This system is fast. Boot drive reads at over 160MB/s sec. The 2 Raid 5 arrays can copy to each other at 250MB/s plus (for multi GB files). Interesting HDTach 3.0.1 only shows 160MB's for the Highpoint array.
They will have to fix their software..
In the last few weeks the system had become very flakey - Windows 7 x64 & vista x64 system -video thumbnail display & codec errors etc, windows explorer hangs, system corruption, bad software & codecs.
The boot manager from the latest (Paragon i think) partition manager for windows 7 got stuck on resize partition and it doesnt time out. I want my pc to be always on for remote access..
Anyway the system finally crashed. I lost one of the Raid0 boot disk array IDs when I tried to delete the boot manager. One disk offline and array gone. 60 hours, 400G of newly imported video from 8mm tapes..
So I decided on clean install just windows 7 after I recovered the data on the raid array.
To that end I removed all the other disks, took a single clean disk and installed vista on it.
Then I went to Bios and deleted the GigaRaid array and recreated it with the original 2 disks.
Changed the boot order in Bios to the first Sata.
Back into windows, initialise the GigaRaid array in windows disk management -Do not partition or format it. Load GetBackDataNTFS and
scan and copy all of the data back to the spare space on the new boot disk.
When I was totally happy I had everything back I loaded Windows Disk management and partitioned the GigaRaid into 250G and 1200G. Formatted the only the 1200G and copied on all of the drivers..
I then shutdown and removed the Vista hard disk and restarted with the Windows 7 DVD. Loaded the Gigaraid drivers and proceded to install Windows 7.
On first reboot, error 80xxxx .
Back to setup and disk management. Delete the new 250G partition and let Install do its stuff. So it creates a 100MB "system" as the first partition then 260G for the C drive and installs itself.
Whoo hoooo! it works.
I shutdown and add the GPT array and the single Roms drive.
Into Bios to set the boot to the Scsii Gigaraid & restart and the dynamic array and Roms disk is there.
Shutdown and install the RocketRaid Card with its 5 disks attached.
Back to bios to set Boot to Scsii Gigaraid.
It always puts Sata 0 first.
Or Scsii 0_1 (the RocketRaid).
Boot back into windows and everything is where it should be.
Clean and fast too. Install all of the software I need.
Now I have a nice system. Time to copy the video I recovered onto the Raid5 array.
So I plug the sata cable into the disk and go into the Highpoint management to scan the disk. Come up ok and is visible in windows.
I copy the data over to the raid.
The I decide to see it the computer will reboot back into windows unattended.. Nope! Screen fills with rubbish that looks like Linux. Says changing boot disk, then stops.
I go back into Bios and reset the boot disk back to Scsii 1_0 (GigaRaid)
Reboot and press F12 for the boot menu. Select the last item - GigaRaid.
Boots back into that Linux looking system (says debian).
I disconnect RocketRaid disk 6, Scsii 0_1 and back to bios and set to Scscii 1_0, Gigaraid, reboot back into windows..
Plug the Rocketraid Scsii 1_0 and reboot - back into Linux?
Question is..
1 What is the purpose of the 100MB that windows installed onto the boot disk.
2 how do i find the boot manager that screws the system when I connect a new drive (including USB key).
3 How do I force the boot to the correct disk array regardless of which drives are installed or not.
4. Is there a boot "something" I can install on every disk to point to Scsii Gigaraid
View 3 Replies
View Related
Dec 17, 2009
The drive had windows xp on it from another build so i just used it to test. It booted xp fine. It only showed 3gb of ram but i think that was due to it being 1066 and needing me to change bios ram settings. So i took my full version of windows 7 professional that i have used to install on my laptop too and tried to install. I formatted the drive completely and chose to install. It goes through the paces installs.
Then when it is supposed to boot from the hard disk the first time it give me a brief blue screen PAGE_FAULT_IN_NONPAGED_AREA so i research it and see it can be linked to hard disk or ram. So obviously its not the disk its been running xp fine and so has the ram. But just in case i switched out the ram with 1gb of old ddr2 800 i had from another build. Same error. I then tried my new ocz ram with a single chip thinking its a dual channel problem. Same error. So then i reburn the microsoft professional image to a new dvd r go through the process again and reformat and still the same error. I have tested all i know to test. Any other ideas?
View 1 Replies
View Related
Jan 3, 2010
I setup my pc with 2 harddisk. I dual boot xp 32-bit and windows 7 64-bit on 1 harddisk and other harddisk is for my data storage for xp and 7. The problem is that windows 7 recognize the 2 harddisk and I can access the data but xp won't. Xp can see the harddisk on 'my computer' but it was listed RAW.
Anyone know how to fix it so that xp and 7 can access the 2nd harddisk?
View 9 Replies
View Related
Jul 21, 2011
I was uninstalling AVG and my syatem would get the BSOD and xrash before I completed it.Eventuallt my whole system crashed and all I get is a message on a black screen fron Phoenix Technologies aaying 'Boot from BBS-harddisk'.Anyone know what this means and if this screen can be bypassed. I can't use f2, f8 or f12.
View 3 Replies
View Related
Jul 22, 2012
New to the Tech forum boards but I am having a problem with my HP Pavillion dv6t. The hard drive went bad so I installed a new Seagate 1TB internal hard drive in the notebook. Starts up fine and then it says that "No bootable device found"---insert disk press any key. The disc is in the cd rom, I went into the BIOS enabled the CD/ROM boot option. I also went into the Boot option menu and tried selecting the internal cd/dvd rom drive option and I went into the actual boot order screen and adjusted the boot order so it read the cd-rom drive first then the hard drive. I also am using the HP Application and Driver recovery DVD. I am not sure if the disc is bad or cd drive is bad. The other thought is that because it is a brand new hard drive there is no information on it for the drivers so maybe the computer is not processing the information.
View 8 Replies
View Related
Nov 26, 2012
i can not install dual-both window7 and window8 on my computer.i think that may be my hard is dynamite.not basic.
View 13 Replies
View Related
Oct 22, 2012
I purchased a new PC with Windows 7 in June 2012. It came with a Samsung optical disk containing Windows 7. I am eligible for the $14.99 USD upgrade to Windows 8.Will there be an installation disk for Windows 8 available at this price and if not, then how much more will it cost?If not, then how should I ensure that I can easily install Windows 8 after a hard disk crash? Do I have to keep my Samsung optical disk of Windows 7?
View 5 Replies
View Related
Jul 20, 2011
in my hardisk with G: size 465gb xp shows that 74.86 gb is remaining space......while space used is 0 , there are no hidden files, nothing in the disk K: size 186gb same as above and remaining is 35 gb according to windows xp i: size 196gb .in this only 9 gb is used and xp shows that 10gb is remaining//
i remember, last week everything was ok and all of sudden this problem has occurred. all other drives are ok only these three are way over their own heads.
my system is
Intel Core i5-2300 cpu@2.8ghz
2.79ghz,3.48 GB of RAM
and windows is 32 bit/
View 2 Replies
View Related
Jan 5, 2012
windows 7 disk boot failure insert system disk and press enter
View 1 Replies
View Related
Sep 10, 2012
I have IOmega 1 TB hard drive. 2 days ago, my comp restarted suddenly after which my external drive is corrupted.I get the error 'H: is not accessble' The disk structure is corrupted and unreadable.It shows up in the disk management as RAW file system,I have almost 700 GB of important documents, pictures & files that I don't want to lose.Does anybody know of any good recovery software that can help.
View 5 Replies
View Related
Nov 13, 2009
I have few questions on Windows 7 Upgrade. Currently I'm using windows vista home premium 64 bit and I bought an windows 7 home premium 64 bit upgrade disk.
first thing is I want to format my previous operating system and all the data in my laptop and install windows 7 in it using the Upgrade disk.
second thing is I don't have my vista installation disk with, my laptop was pre-installed with vista so in future if I want to switch can I get back VISTA using system restore.
third is can i install windows 7 on a new hard disk using a windows 7 Upgrade disk?
View 4 Replies
View Related
Dec 28, 2011
So, I need to know if I can install windows 7 x64 via direct boot when I start up my computer it is in ISO format. So like my default boot will be my DVD drive to install it. can I do that with it being ISO format?
View 12 Replies
View Related
Mar 25, 2012
I tried to add a new 1TB HDD into my computer. not realizing what i was doing wrong. i just threw it in there no software or anything. now my PC is getting "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER" and i no longer have my windows 7 disk. is there anything i can do ?
View 1 Replies
View Related
Aug 27, 2011
I woke up this morning, and I found that my computer was displaying this message"Disk boot failure, insert system disk and press enter". There are a ton of needed documents on the computer, and I'm hoping that they can be saved some way.
View 5 Replies
View Related
Oct 13, 2010
I've been having this error even after reformatting and reinstalling Windows 7 on my desktop. I've done reformatting / reinstalling Windows 7 several times, yet the problem still occurs. I'm thinking of my HDD as being corrupted or messed up. The problem occurred after I accidentally hit the CPU when I was stretching my foot. The screen froze after that. Upon rebooting it, 'Disk boot failure, Insert system disk and press enter' occurs. After I entered the DVD installer of Windows 7, the screen just hangs.
View 9 Replies
View Related
Feb 17, 2010
I have been having a bit of trouble with windows 7 lately, namely that it won't start up right. When I boot from the drive normally, it gives me the classic "BOOT DISK ERROR: INSERT SYSTEM DISK AND PRESS ENTER" message.
However, I soon discovered that if I boot from the Windows 7 cd and do not boot from it (By ignoring the "Press a key to boot from CD or DVD..." Windows 7 boots up fine.
I've tweaked my BIOS over and over, but the same problem persists. The drive is brand new and fine. What can I do?
View 10 Replies
View Related
Jan 10, 2013
My friend bought a new PC and needed to put am OS on it. He put in the W7 disk and the error message 'disk boot failure insert system disk and press enter' appeared before installation was shown. He has tried changing around BIOS and it also recognises the hard drive and DVD/ CD ROM drive. Here is the specification he was given:Case : CIT Reaper Black Mesh fronted Tower CaseMotherboard : Gigabyte 78LMT Motherboard TechnologyCPU : AMD Bulldozer FX 4170 4.2ghz 8mb CacheHard Drive : 1tb Sata Hard DriveMemory : 8gb DDR3 1600mhz MemoryOptical Drive : 24x Dual Layer Sata DVD WriterGraphics Card : Nvidia Geforce GTX 650 2gb GDDR5 With HDMIPower Supply : 750 Watt Branded Power Supply Also, he has tried booting BIOS in different order
View 3 Replies
View Related
Sep 5, 2011
When starting the computer, I keep getting "Disk boot failure, insert system disk and press enter". Nothing works other than putting in the boot disk and hitting the restart button on the tower. Then it will boot up and run fine. But how do I stop it from having to have the disk in order to load? Checked in the BIOS and the hard drive is the first load.
View 3 Replies
View Related
