Bluescreen Error - Boot From The Hard Disk The First Time
Dec 17, 2009
The drive had windows xp on it from another build so i just used it to test. It booted xp fine. It only showed 3gb of ram but i think that was due to it being 1066 and needing me to change bios ram settings. So i took my full version of windows 7 professional that i have used to install on my laptop too and tried to install. I formatted the drive completely and chose to install. It goes through the paces installs.
Then when it is supposed to boot from the hard disk the first time it give me a brief blue screen PAGE_FAULT_IN_NONPAGED_AREA so i research it and see it can be linked to hard disk or ram. So obviously its not the disk its been running xp fine and so has the ram. But just in case i switched out the ram with 1gb of old ddr2 800 i had from another build. Same error. I then tried my new ocz ram with a single chip thinking its a dual channel problem. Same error. So then i reburn the microsoft professional image to a new dvd r go through the process again and reformat and still the same error. I have tested all i know to test. Any other ideas?
View 1 Replies
ADVERTISEMENT
Oct 17, 2009
Background:-
System Gigabyte X48T, 4G ram, usual bits. Video
Sata Port 0&1 - Gigaraid 2x 750G Raid 0 - Scsii disk Boot.
Sata ports 2&3, 4&5, 6, - 5x 500G 2TB dynamic GPT Raid 5
Sata Port 7 -1x 750G Roms & software disk.
Rocket Raid Scsii 0_1, 5x1TB in raid 5.
Scsii 0_0, 1x500G JBOD.
Problem is here.
I have been trying to get this system ready to do extensive HD video editing and multimedia work so thumbnails are critical to sorting out 1000's of clips. Vista just doesnt show thumbnails. I have been waiting years for Windows 7.
This system is fast. Boot drive reads at over 160MB/s sec. The 2 Raid 5 arrays can copy to each other at 250MB/s plus (for multi GB files). Interesting HDTach 3.0.1 only shows 160MB's for the Highpoint array.
They will have to fix their software..
In the last few weeks the system had become very flakey - Windows 7 x64 & vista x64 system -video thumbnail display & codec errors etc, windows explorer hangs, system corruption, bad software & codecs.
The boot manager from the latest (Paragon i think) partition manager for windows 7 got stuck on resize partition and it doesnt time out. I want my pc to be always on for remote access..
Anyway the system finally crashed. I lost one of the Raid0 boot disk array IDs when I tried to delete the boot manager. One disk offline and array gone. 60 hours, 400G of newly imported video from 8mm tapes..
So I decided on clean install just windows 7 after I recovered the data on the raid array.
To that end I removed all the other disks, took a single clean disk and installed vista on it.
Then I went to Bios and deleted the GigaRaid array and recreated it with the original 2 disks.
Changed the boot order in Bios to the first Sata.
Back into windows, initialise the GigaRaid array in windows disk management -Do not partition or format it. Load GetBackDataNTFS and
scan and copy all of the data back to the spare space on the new boot disk.
When I was totally happy I had everything back I loaded Windows Disk management and partitioned the GigaRaid into 250G and 1200G. Formatted the only the 1200G and copied on all of the drivers..
I then shutdown and removed the Vista hard disk and restarted with the Windows 7 DVD. Loaded the Gigaraid drivers and proceded to install Windows 7.
On first reboot, error 80xxxx .
Back to setup and disk management. Delete the new 250G partition and let Install do its stuff. So it creates a 100MB "system" as the first partition then 260G for the C drive and installs itself.
Whoo hoooo! it works.
I shutdown and add the GPT array and the single Roms drive.
Into Bios to set the boot to the Scsii Gigaraid & restart and the dynamic array and Roms disk is there.
Shutdown and install the RocketRaid Card with its 5 disks attached.
Back to bios to set Boot to Scsii Gigaraid.
It always puts Sata 0 first.
Or Scsii 0_1 (the RocketRaid).
Boot back into windows and everything is where it should be.
Clean and fast too. Install all of the software I need.
Now I have a nice system. Time to copy the video I recovered onto the Raid5 array.
So I plug the sata cable into the disk and go into the Highpoint management to scan the disk. Come up ok and is visible in windows.
I copy the data over to the raid.
The I decide to see it the computer will reboot back into windows unattended.. Nope! Screen fills with rubbish that looks like Linux. Says changing boot disk, then stops.
I go back into Bios and reset the boot disk back to Scsii 1_0 (GigaRaid)
Reboot and press F12 for the boot menu. Select the last item - GigaRaid.
Boots back into that Linux looking system (says debian).
I disconnect RocketRaid disk 6, Scsii 0_1 and back to bios and set to Scscii 1_0, Gigaraid, reboot back into windows..
Plug the Rocketraid Scsii 1_0 and reboot - back into Linux?
Question is..
1 What is the purpose of the 100MB that windows installed onto the boot disk.
2 how do i find the boot manager that screws the system when I connect a new drive (including USB key).
3 How do I force the boot to the correct disk array regardless of which drives are installed or not.
4. Is there a boot "something" I can install on every disk to point to Scsii Gigaraid
View 3 Replies
View Related
Mar 29, 2012
im usin 2tb segate new hard disk sir..in my system i cant able to boot my os and also my hard disk...its showin that hard disk boot failure insert system disk press enter ...i restarted many times its sayin the same problem...in my gigabite mobo bios my hard disk is not get detected sir....the problem is that wen im installin the new os for 2nd time its all went nice only sir but at the completion of the os it wil ask for the user name and password but in my system its frozen sir fully of black screen and i cant able to do anythin so i restarted my system from that im gettin this error as hard disk boot failure insert system disk press enter.....that my new hard disk and all of my data is in that hard disk only..this problem arises wen im installing the os for 2nd time sir.
View 6 Replies
View Related
Sep 10, 2012
I have IOmega 1 TB hard drive. 2 days ago, my comp restarted suddenly after which my external drive is corrupted.I get the error 'H: is not accessble' The disk structure is corrupted and unreadable.It shows up in the disk management as RAW file system,I have almost 700 GB of important documents, pictures & files that I don't want to lose.Does anybody know of any good recovery software that can help.
View 5 Replies
View Related
Jun 21, 2011
My PC has decided to do a check disk every time it boots up, what is causing it.
View 5 Replies
View Related
Aug 29, 2010
My laptop apparently is having a hard time booting. I start it up, it will display the blinking cursor and stay like that forever, i hard shut it down and the BIOS will search for new hardware (as its suppose to) and then the blinking cursor will appear for around a minute before booting up! this is really annoying and ive already Reset the BIOS to default and Reinstalled windows (deleted all Partitions and made one)
View 9 Replies
View Related
Feb 17, 2010
I have been having a bit of trouble with windows 7 lately, namely that it won't start up right. When I boot from the drive normally, it gives me the classic "BOOT DISK ERROR: INSERT SYSTEM DISK AND PRESS ENTER" message.
However, I soon discovered that if I boot from the Windows 7 cd and do not boot from it (By ignoring the "Press a key to boot from CD or DVD..." Windows 7 boots up fine.
I've tweaked my BIOS over and over, but the same problem persists. The drive is brand new and fine. What can I do?
View 10 Replies
View Related
Dec 25, 2011
Recently I can't play any DVD disk with my HP Dv3 DVD drive, once inserted a disk after auto play start it crash to blue screen. I have tried with an external drive same problem.
View 6 Replies
View Related
Aug 5, 2011
I've just bought Seagate Momentus XT 500GB and installed it myself to desktop. Downloaded DiskWizard from Seagate to clone my old hard disk into the new one.
Problem: How do I boot from the new hard disk? I still got my old hard disk on my computer, I'm trying to use it as extra storage, but it's still booting from the old C drive. How do I change it to boot from my new hard disk?
View 4 Replies
View Related
Dec 28, 2012
If I have one computer and I have two hard disk (Hard disk A and Hard disk B) and then installed Windows 7 on both hard disk one at a time using the same computer, will be I able to boot from Hard disk A and then shut down the computer, then replace Hard disk A with Hard Disk B?
View 3 Replies
View Related
Jul 10, 2012
Every time I try and start my laptop I get the BSOD. I tried going to Last Known Good Configuration and it seemed to work as it did not crash immediately, but when I opened the internet the BSOD came back.I attached the dump files and health report and my specs are as follows.
View 3 Replies
View Related
Jul 16, 2012
My samsung 830 ssd (256 gb) was working excellently and last night for some reason it decided to no longer boot at the nice speed at which it did before. Now I believe it is still performing up to par in the OS environment due to my AS SSD score being 724, although I have not seen many others to compare to.The system originally would boot in a time of 15-16 seconds. however, after this error: The boot time jumped to around 30 seconds.The error occurred yesterday night, and I believe I played around with Samsung's SSD Magician Utility, allowed it to "Optimize" the OS, however I am not sure if this was at the time of the reported error.Here is what I've tried so you may dismiss possible solutions
-Flash Bios
-Update SSD Firmware (was already the Latest)
-Re-Optimize through SSD Magician
-Disable Prefetch and Superfetch in regedit
-Unplug My optical Drive from the SATA3 port
-Unplug the SSD, allow the system to enter bios, turn off, then plug in again, to no avail.
-Lastly I uninstalled SSD Magician hoping that the program was the cause of the error, yet that is a no as well.
View 9 Replies
View Related
Mar 2, 2012
I converted my 500 gb hard disk to DYNAMIC DRIVE. now my windows 7 won't boot from hard disk. what will i do?? is there any way i can recover my files..??
View 8 Replies
View Related
Jun 20, 2012
i bought a new bigger hard disk.used easyus todo backup to clone my windows partition to the newer hard disk so i can have more space.used EasyBCD to configure boot stuff to new hard disk and made a new entry in the OS .in my old windows.windows cloned new hard disk windows ( which i wanna use i used EasyBCD to boot the A: windows .in that windows the new hard disk windows and old windows still AND moreover all my programs non windows stuff are being run from C: and windows is being used from i dont want to disconnect hard disks . is there anyway so i can move on to new windows and then delete the old smaller partition for storage space
View 2 Replies
View Related
Dec 18, 2011
Ok so I had the windows 7 anti virus 2012 on my computer. I used these fourms on BC to try and help and get rid of it and I thought I had. So I downloaded microsoft security essentials to see if I had any remaining viruses and left for work. When I got home from work It said there where errors/threats and that I needed to restart my computer so I did so. But when I tried to restart it I got the Start Computer Normally or Do a system Repair screen. I tried to start my computer normally but whenever I do I get the Hard Disk error message it reads like thisHard Disk ErrorPlease run the Hard Disk Test in System DiagnosticsHard Disk 1 (3f1)F2 System Diagnostics for more information,
[url]...
I restarted my computer again and that same menu popped up with the Start computer normally or Do a system repair. So I attempted a System Repair it took hours but nothing happened. Am I just being Impatient or is my computer wrecked?Here are my specs:Microsoft Windows 7 Home PremiumProcessor Speed: 2.13 GHzRAM 4 GBIntel Core i3 330MGraphics Card Intel GMA HDStorage Capacity 320 GB
View 2 Replies
View Related
Apr 30, 2011
i am installed using Windows 7 ultimate 32bit now. i tried to partition the extended hard disk in my new pc but it shows the error as " no available memory to partition on your computer" so what i do, still there is 215GB of free space with good health.
View 3 Replies
View Related
Jan 19, 2013
hard disc reporting error
View 3 Replies
View Related
Sep 20, 2009
recently I started getting error messages similar to may Previous post.
BCCode: d1
BCP1: 00000000
BCP2: 00000002
BCP3: 00000000
BCP4: 92653456
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1
It is important to mention I'm not sure when this happens,Or what exactly I was doing the same hour.Once I watch a movie, another time it happens at night, etc.
All drivers updated, I am attaching files from C:WindowsMinidump.
View 1 Replies
View Related
Mar 25, 2012
I've had this problem for a while and it drives me nuts. Every time I shut down my computer it will crash the next time I power up and try to boot windows 7. I can go in and out of sleep or hibernate without issue but if I ever shut down my system it will BSOD during the next power on. After this initial BSOD there are usually a series of BSOD (usually they report different error codes) in subsequent restarts. Eventually the system does seem to stabilize and stop crashing. Once things are working it will run for literally months without another BSOD.
Win 7 Ultimate x64 (retail)
8gb DDR3 ram
i5 750 @ 2.67ghz
RadeonHD 5770 1gb
system is less than 2 years old and OS was last installed ~18 months ago (c: partition reformat and clean install)
View 5 Replies
View Related
Jun 14, 2012
Compaq presario with Vista. Trying to do a clean install of windows 7 on comapq presario f500. Problem is the machine will only boot from hard drive. Cd drive works fine just can't boot from it. Windows 7 install disk won't boot. Windows xp install cd won't boot. In bios setup I've move the dvd/cdrom drive to top of boot list still no luck. So I got tricky booted from vista and starting windows 7 install cd from windows explorer. Install hung part way through and I had to turn off the computer. No I can't boot vista and have an incomplete install of windows 7 which won't boot. Not even safe mode. When you boot hit Esc the boot menus only shows notebook hard drive as an option. I've also tried unpluging the battery to clear out.
View 6 Replies
View Related
Nov 21, 2012
My computer had a problem with the Board so I am trying to boot the hard disk (the O.S is Windows 7) in a diferent computer but when it Shows the Welcolme Screen I always get blue screen. The other computer is a diferent model but I had done this before With Windows XP and it Worked with some drivers problems but It worked.
View 5 Replies
View Related
Nov 3, 2011
Every time I boot up or wake up from Sleep mode my hard disk hunts for about 10 minutes probably updating files. This seriously slows down my system. I use the Microsoft virus checker, and the Microsoft Backup utility. Could it be one of these, or some other software, and if so how can I locate it and then stop it?
View 7 Replies
View Related
Jun 8, 2011
I reinstalled my hp notebook after getting message boot disk not found (3F0). I am running System Type x64 hp pavilion Dv7 with a AMD Phenom P840 Triple Core Processor.After restoring it from the recovery disk to.. from box condition and reloading all updates and drivers system still gives me the same message. The first time i reinstalled it to factory default and it didn't work. That is why the second time I did the from the box installation. I think I have created more than one operating system now and I don't know how to fix the problem. When it was originally loaded from Staples in January this year it wasn't really running great but I thought it was just my wireless connection was slow. Then it started to take a long time to do anything, on or offline. I went into the updates history from Microsoft and noticed that the first 14 updates they did failed. One of them was for display amd M880G with ati mobility. The computer began lagging worse and worse and starting to become unstable. That was when i decided to run the recovery disk not knowing that it was creating more hard disks. The message is back and now there is more than one hard disk and the last one i did was complete and all updates drivers were successful. I am still getting the boot devise not found message and sometimes it won't start at all.
View 11 Replies
View Related
Dec 23, 2011
can an OS be changed from low high,example wind.xp[default] to windows 7?
View 1 Replies
View Related
Apr 22, 2012
I recently bought a lop top and have seen the blue s reen 3 times. When downloading AVG anti virus a start up test popped up and said boot drive not found also said Hard disk (3FO) not found please help me fix and down load drivers that I need.
View 5 Replies
View Related
Apr 14, 2012
This is kinda long and I've fixed it, but could use your input. So after waking up, my parents informed me that the computer was shutting down randomly. I turned it on and "a disk error occurred press ctrl+alt+del to restart " appeared. It's a Sata hard drive so I checked the cables to make sure they were plugged in correctly and they were, and then I tried connecting it to another computer with that computers cables and that didn't work either. My parents not wanting to buy one online, decided to just go to bestbuy and buy one there, since we already had the Windows 7 Disk at home. I formatted it, partitioned it, and installed Windows 7 Home Premium on it and everything worked. I decided to connect the Hard drive that didn't work while the computer was still on, and it immediately started downloading the drivers it needed and up popped all the hard drive. I'm going to start transferring all the important things like music,videos and games, and after, all I can see are the following 3 things; after getting all the data we want off it, should I reinstall windows to see if my other computer will recognize it (Even though it couldn't before), format it and just use it as extra data (though since it already couldn't boot up, the ability to keep data on it may fail in a couple of days/weeks) or just put it away and not use it at all.
View 3 Replies
View Related
Aug 29, 2012
2 days ago, my laptop stopped working and when I rebooted it, it didn't let me get into windows and took me to startup repair and after 24 hours, nothing happened, so i decided to reboot my labtop again (while it was doing startup repair still) and i used recovery cd to try to repair but it said "Imminent Hard Disk Failure" and i click continue with the startup repair, my CD work ( got into the options) and i chose startup repair and it work but after that i gave me that my Hard Disk Failer
View 8 Replies
View Related
Nov 11, 2011
I started my pc,and i get this error."disk boot failure insert system disk and press enter"
Windows 7 will not load.I have the disc which i assume re-installs windows 7? Will this delete all my files i currently have on the drive?
View 4 Replies
View Related
Jun 7, 2012
i did notice that at every boot , Windows 7 spins up my hard disk during the boot
can i avoid this? and my boot is slower
View 3 Replies
View Related
Jan 3, 2010
I setup my pc with 2 harddisk. I dual boot xp 32-bit and windows 7 64-bit on 1 harddisk and other harddisk is for my data storage for xp and 7. The problem is that windows 7 recognize the 2 harddisk and I can access the data but xp won't. Xp can see the harddisk on 'my computer' but it was listed RAW.
Anyone know how to fix it so that xp and 7 can access the 2nd harddisk?
View 9 Replies
View Related
Dec 15, 2012
I am using windows 7 64 bit on my hp pavillion g6 laptop (g6 - 1118tx model) and the warranty is expired . Well I ve got 2 problems , please read the whole problem and provide some solution. Around a week back my Laptop got struck(edit - windows 7 os got struck .. hangs .. watever) so i have restarted it , but when i did it showed some error message "windows was unable to start your system" something like that .. I tried safe mode,installing windows again and even recovery disks that i have got but all of them did not work outso i have run diagnosis on hard disk and the test result is a 303 ERROR , which turned out to be a hard disk crash when i googled about it.. But i need to back up my data , so did some research and used UBUNTU live cd to back up data , which worked fine and i am able to back up all the drives except the C drive (may be C drive got crashed).
I thought i need to buy a new hard again but i saw install option in ubuntu live cd and ubuntu got installed and in the processing of installing I FORMATTED 2 drives as EXT PARTITIONS (do remember this point).. After that I installed windows 7 on another drive (not C drive) which worked but now the system is very very very slow , you cant imagine how slow it is , takes 30 mins to copy 500 mb file, 5 mins to open my computer.. So now my problem is ... Should I replace my hard disk ??, because when i asked friend of mine in service center he said its better to replace, because even though its working now he said it may crash again in future and who knows the whole data might be lost If I dont want to replace, can you guys provide any solution to speed up my system ?? Do you remember the point about partitioning 2 drives as EXT in ubuntu (refer above) .. well those 2 drives i am unable to format in windows 7
View 1 Replies
View Related
