Run Diagnosis On Hard Disk And The Test Result Is A 303 ERROR?
Dec 15, 2012
I am using windows 7 64 bit on my hp pavillion g6 laptop (g6 - 1118tx model) and the warranty is expired . Well I ve got 2 problems , please read the whole problem and provide some solution. Around a week back my Laptop got struck(edit - windows 7 os got struck .. hangs .. watever) so i have restarted it , but when i did it showed some error message "windows was unable to start your system" something like that .. I tried safe mode,installing windows again and even recovery disks that i have got but all of them did not work outso i have run diagnosis on hard disk and the test result is a 303 ERROR , which turned out to be a hard disk crash when i googled about it.. But i need to back up my data , so did some research and used UBUNTU live cd to back up data , which worked fine and i am able to back up all the drives except the C drive (may be C drive got crashed).
I thought i need to buy a new hard again but i saw install option in ubuntu live cd and ubuntu got installed and in the processing of installing I FORMATTED 2 drives as EXT PARTITIONS (do remember this point).. After that I installed windows 7 on another drive (not C drive) which worked but now the system is very very very slow , you cant imagine how slow it is , takes 30 mins to copy 500 mb file, 5 mins to open my computer.. So now my problem is ... Should I replace my hard disk ??, because when i asked friend of mine in service center he said its better to replace, because even though its working now he said it may crash again in future and who knows the whole data might be lost If I dont want to replace, can you guys provide any solution to speed up my system ?? Do you remember the point about partitioning 2 drives as EXT in ubuntu (refer above) .. well those 2 drives i am unable to format in windows 7
View 1 Replies
ADVERTISEMENT
Jul 11, 2009
So I have a Laptop with 4gb of DDR2-800 SDRAM
I have done the winsat mem test and get a result of 3700 mb/s on average.
I also notice that my memory is never above 2gb used.
So whats the deal? is my system running the way it should be memory wise? Do allot of people use only half their memory? is 3700mb/s what is to be expected from my memory? Because I see ALLOT faster times from the memory assessment sticky post (I know that some of them are from monster systems and you cant compare...but 3700 seems slow compared to others.
View 9 Replies
View Related
Sep 6, 2012
I have a HP Probook 4530swith Windows 7 Home Premium 64 bit. When I turn on the PC the windows does'nt start and give a option of starting windows manually, which does'nt work, and repair windows. Repairing windows with windows 7I then decided to reinstall windows 7, but while installing, on the select disk page, it shows a error saying no drives found.I then performed a Hard Disk Test which resulted in failure saying:Failure ID : UC7WX0-5NB67S-XD6V5G-60TF03
View 2 Replies
View Related
Sep 10, 2012
I have IOmega 1 TB hard drive. 2 days ago, my comp restarted suddenly after which my external drive is corrupted.I get the error 'H: is not accessble' The disk structure is corrupted and unreadable.It shows up in the disk management as RAW file system,I have almost 700 GB of important documents, pictures & files that I don't want to lose.Does anybody know of any good recovery software that can help.
View 5 Replies
View Related
Jan 1, 2012
I am trying to install Microsoft Network Framework v.4 (x64) and I keep getting error "Final Result: Installation failed with error code: (0x80070643), "Fatal error during installation" (Elapsed time: 0 00:01:01)." The exact log file is attached: Code: OS Version Information:
OS Version = 6.1.7601, Platform 2, Service Pack 1
OS Description = Windows 7 - x64 Ultimate Edition Service Pack 1
OS Version Information
[code].....
View 3 Replies
View Related
Jun 14, 2010
I�m running a single Windows 7 Ultimate x86 OS on my laptop and it used to work very well �till earlier today once I get back home trying to use my computer as usual to find out that it always runs the startup repair after showing the words �windows is loading files� instead of starting windows normally. Once the diagnostic & repair process is done it tells me that Startup Repair cannot repair this computer automatically. When I view the details I get the following under Root cause found:
Boot configuration is corrupted.
Repair action: Partition table repair.
Result: Failed. Error code = 0x490
After many times doing the previous repairs with no result I went to Command Prompt in order to check my system drive to find out that both �Windows� & �Program Files� directories are not existed there anymore. Instead, there�s a �Windows.old� directory that contains those 2 system directories as well as �Users� & �PerfLogs� directories plus the �autoexec.bat� & �config.sys� files. Sure there�s noway to use the system restore tool or anything else even using my Windows boot DVD. Still can�t use the cmd commands single handedly to fix this.As I said earlier I have never faced such problem before plus I have no idea how to regain my windows since I can never format my system drive as I need to backup all the files, settings, bookmarks & favorites located in my user profile first.
View 9 Replies
View Related
Dec 18, 2011
Ok so I had the windows 7 anti virus 2012 on my computer. I used these fourms on BC to try and help and get rid of it and I thought I had. So I downloaded microsoft security essentials to see if I had any remaining viruses and left for work. When I got home from work It said there where errors/threats and that I needed to restart my computer so I did so. But when I tried to restart it I got the Start Computer Normally or Do a system Repair screen. I tried to start my computer normally but whenever I do I get the Hard Disk error message it reads like thisHard Disk ErrorPlease run the Hard Disk Test in System DiagnosticsHard Disk 1 (3f1)F2 System Diagnostics for more information,
[url]...
I restarted my computer again and that same menu popped up with the Start computer normally or Do a system repair. So I attempted a System Repair it took hours but nothing happened. Am I just being Impatient or is my computer wrecked?Here are my specs:Microsoft Windows 7 Home PremiumProcessor Speed: 2.13 GHzRAM 4 GBIntel Core i3 330MGraphics Card Intel GMA HDStorage Capacity 320 GB
View 2 Replies
View Related
Apr 30, 2011
i am installed using Windows 7 ultimate 32bit now. i tried to partition the extended hard disk in my new pc but it shows the error as " no available memory to partition on your computer" so what i do, still there is 215GB of free space with good health.
View 3 Replies
View Related
Jan 19, 2013
hard disc reporting error
View 3 Replies
View Related
Apr 14, 2012
This is kinda long and I've fixed it, but could use your input. So after waking up, my parents informed me that the computer was shutting down randomly. I turned it on and "a disk error occurred press ctrl+alt+del to restart " appeared. It's a Sata hard drive so I checked the cables to make sure they were plugged in correctly and they were, and then I tried connecting it to another computer with that computers cables and that didn't work either. My parents not wanting to buy one online, decided to just go to bestbuy and buy one there, since we already had the Windows 7 Disk at home. I formatted it, partitioned it, and installed Windows 7 Home Premium on it and everything worked. I decided to connect the Hard drive that didn't work while the computer was still on, and it immediately started downloading the drivers it needed and up popped all the hard drive. I'm going to start transferring all the important things like music,videos and games, and after, all I can see are the following 3 things; after getting all the data we want off it, should I reinstall windows to see if my other computer will recognize it (Even though it couldn't before), format it and just use it as extra data (though since it already couldn't boot up, the ability to keep data on it may fail in a couple of days/weeks) or just put it away and not use it at all.
View 3 Replies
View Related
Aug 29, 2012
2 days ago, my laptop stopped working and when I rebooted it, it didn't let me get into windows and took me to startup repair and after 24 hours, nothing happened, so i decided to reboot my labtop again (while it was doing startup repair still) and i used recovery cd to try to repair but it said "Imminent Hard Disk Failure" and i click continue with the startup repair, my CD work ( got into the options) and i chose startup repair and it work but after that i gave me that my Hard Disk Failer
View 8 Replies
View Related
Oct 17, 2009
Background:-
System Gigabyte X48T, 4G ram, usual bits. Video
Sata Port 0&1 - Gigaraid 2x 750G Raid 0 - Scsii disk Boot.
Sata ports 2&3, 4&5, 6, - 5x 500G 2TB dynamic GPT Raid 5
Sata Port 7 -1x 750G Roms & software disk.
Rocket Raid Scsii 0_1, 5x1TB in raid 5.
Scsii 0_0, 1x500G JBOD.
Problem is here.
I have been trying to get this system ready to do extensive HD video editing and multimedia work so thumbnails are critical to sorting out 1000's of clips. Vista just doesnt show thumbnails. I have been waiting years for Windows 7.
This system is fast. Boot drive reads at over 160MB/s sec. The 2 Raid 5 arrays can copy to each other at 250MB/s plus (for multi GB files). Interesting HDTach 3.0.1 only shows 160MB's for the Highpoint array.
They will have to fix their software..
In the last few weeks the system had become very flakey - Windows 7 x64 & vista x64 system -video thumbnail display & codec errors etc, windows explorer hangs, system corruption, bad software & codecs.
The boot manager from the latest (Paragon i think) partition manager for windows 7 got stuck on resize partition and it doesnt time out. I want my pc to be always on for remote access..
Anyway the system finally crashed. I lost one of the Raid0 boot disk array IDs when I tried to delete the boot manager. One disk offline and array gone. 60 hours, 400G of newly imported video from 8mm tapes..
So I decided on clean install just windows 7 after I recovered the data on the raid array.
To that end I removed all the other disks, took a single clean disk and installed vista on it.
Then I went to Bios and deleted the GigaRaid array and recreated it with the original 2 disks.
Changed the boot order in Bios to the first Sata.
Back into windows, initialise the GigaRaid array in windows disk management -Do not partition or format it. Load GetBackDataNTFS and
scan and copy all of the data back to the spare space on the new boot disk.
When I was totally happy I had everything back I loaded Windows Disk management and partitioned the GigaRaid into 250G and 1200G. Formatted the only the 1200G and copied on all of the drivers..
I then shutdown and removed the Vista hard disk and restarted with the Windows 7 DVD. Loaded the Gigaraid drivers and proceded to install Windows 7.
On first reboot, error 80xxxx .
Back to setup and disk management. Delete the new 250G partition and let Install do its stuff. So it creates a 100MB "system" as the first partition then 260G for the C drive and installs itself.
Whoo hoooo! it works.
I shutdown and add the GPT array and the single Roms drive.
Into Bios to set the boot to the Scsii Gigaraid & restart and the dynamic array and Roms disk is there.
Shutdown and install the RocketRaid Card with its 5 disks attached.
Back to bios to set Boot to Scsii Gigaraid.
It always puts Sata 0 first.
Or Scsii 0_1 (the RocketRaid).
Boot back into windows and everything is where it should be.
Clean and fast too. Install all of the software I need.
Now I have a nice system. Time to copy the video I recovered onto the Raid5 array.
So I plug the sata cable into the disk and go into the Highpoint management to scan the disk. Come up ok and is visible in windows.
I copy the data over to the raid.
The I decide to see it the computer will reboot back into windows unattended.. Nope! Screen fills with rubbish that looks like Linux. Says changing boot disk, then stops.
I go back into Bios and reset the boot disk back to Scsii 1_0 (GigaRaid)
Reboot and press F12 for the boot menu. Select the last item - GigaRaid.
Boots back into that Linux looking system (says debian).
I disconnect RocketRaid disk 6, Scsii 0_1 and back to bios and set to Scscii 1_0, Gigaraid, reboot back into windows..
Plug the Rocketraid Scsii 1_0 and reboot - back into Linux?
Question is..
1 What is the purpose of the 100MB that windows installed onto the boot disk.
2 how do i find the boot manager that screws the system when I connect a new drive (including USB key).
3 How do I force the boot to the correct disk array regardless of which drives are installed or not.
4. Is there a boot "something" I can install on every disk to point to Scsii Gigaraid
View 3 Replies
View Related
Dec 17, 2009
The drive had windows xp on it from another build so i just used it to test. It booted xp fine. It only showed 3gb of ram but i think that was due to it being 1066 and needing me to change bios ram settings. So i took my full version of windows 7 professional that i have used to install on my laptop too and tried to install. I formatted the drive completely and chose to install. It goes through the paces installs.
Then when it is supposed to boot from the hard disk the first time it give me a brief blue screen PAGE_FAULT_IN_NONPAGED_AREA so i research it and see it can be linked to hard disk or ram. So obviously its not the disk its been running xp fine and so has the ram. But just in case i switched out the ram with 1gb of old ddr2 800 i had from another build. Same error. I then tried my new ocz ram with a single chip thinking its a dual channel problem. Same error. So then i reburn the microsoft professional image to a new dvd r go through the process again and reformat and still the same error. I have tested all i know to test. Any other ideas?
View 1 Replies
View Related
Dec 26, 2011
i am using windows 7 os. Actulay i format the system. after formating system whn i login , i am getting msg "windows detected hard disk problem and you may loss datas from ur drive c,d & e" bt my system condition is good.wt should i do for this?hw can i clear this error? pls help me
View 1 Replies
View Related
Feb 27, 2011
When I started my toshiba laptop this morning, it started up normally, but then it shut down. When I tried to start it up, the screen was blank, but the power light was on. After about an hour, it just shut down. I tried to start it again, and it worked fine. I then ran a diagnostic test and it said "HARDDISK DRIVE TEST FAIL" What can I do to fix this?
View 1 Replies
View Related
Oct 8, 2012
I have a HP laptop with a toshiba HDD 640gb and it's running real slow and I would like to run a diag tools on it to see if the drive is slowly dying but can't find any s/w utlity to do that.
View 2 Replies
View Related
Nov 7, 2012
I messed up whilst installing windows 7 over older windows 7 drive. I formatted the windows 7 drive and again tried to deleted that partition, but that deletion process took around 10-15 minutes, so restarted my system. Now i cannot install any of the windows os or even linux.
View 2 Replies
View Related
Nov 7, 2012
I messed up whilst installing windows 7 over older windows 7 drive. I formatted the windows 7 drive and again tried to deleted that partition, but that deletion process took around 10-15 minutes, so restarted my system. Now i cannot install any of the windows os or even linux.
View 1 Replies
View Related
Dec 3, 2012
Computer is a Sony Vaio VGC-RC110G (not sure about motherboard). About 3 weeks ago computer starts refusing to boot giving errors that make me think the hard drive is bad. Computer will still occasionally boot after 5-10 tries. I bought a new hard drive and tried to create an image of the old drive onto the new using Clonezilla, the process gave a few errors. The computer flatly refused to boot from the new drive (gave disk read errors). However, when I could boot using the old drive, I could get in and explore the image of the new drive and the image copy process seemed to have worked okay.
As part of the disk image copy process, my new drive had 2 partitions and about 900 megs of free space. The two partitions were the main windows partition from the old drive and the recovery partition. I combined all partitions and formatted the new drive (using Gparted) because I thought that the disk image copy probably just recreated errors in the old drive onto the new. After the format, my computer then consistently refused to boot from either drive. (in the past I could boot to the old drive after a couple of tries). The error was usually "a disk read error occurred' or "BOOTMGR is missing."
Attempts to install windows using windows install DVD failed because computer couldn't write to the new hard drive. Both hard drives would usually appear in bios when I entered into it (I know at least one time where neither appeared in the bios), although sometimes computer would fail allow me to edit bios altogether. I attached the new hard drive to a different computer and installed a clean version of windows 7 Ultimate x86 to the new drive. The different computer boots just fine from the new hard drive. But when I move the new hard drive to back to the old computer I consistently now get "a disk read error occurred" error.
I don't believe it is a SATA cable issue because power to drive seems to be fine and I had to use the SATA cable from the old computer when hooking the drive up to the different and it worked fine. Also, Gparted recognizes the drive just fine and has no problems formatting partitions etc., so there is communication happening through the SATA cable and the power cable is powering adequately.TL;DR summary: New hard drive works fine with new computer, but old computer (when connected to same new hard drive) gives me a "disk read error occurred." Based on the evidence, I don't think it's a faulty drive issue. I'm also skeptical that it's a cable issue, but haven't 100% ruled out this possibility. What should I do next in terms of identifying the problem? I've currently exhausted my (admittedly limited) hardware troubleshooting .expertise.
View 1 Replies
View Related
Sep 10, 2012
My existing dual boot winxp/Windows 7 mirrored configuration appears to have issues. I ordered a SSD hd today from newegg. Question: new install, or just re-image the SSD? If I do new install, do I have to have a authorization from Microsoft? I purchased this Windows 7 Professional 2 years ago...
View 1 Replies
View Related
Nov 7, 2012
I messed up whilst installing windows 7 over older windows 7 drive. I formatted the windows 7 drive and again tried to deleted that partition, but that deletion process took around 10-15 minutes, so restarted my system. Now i cannot install any of the windows os or even linux .
View 4 Replies
View Related
Aug 5, 2012
I want to know how to run hard drive test on asus laptop.
View 1 Replies
View Related
Nov 30, 2012
I have an HP dv5 notebook PC with windows 7 (64bit) I3 cpu m330@2.13 ghz. I recently had to wipe my hard drive due to a virus. I bought this 2nd hand and wasn't provided any disks. I do have a Dell re-installation DVD with the same OS. I realize this disk won't install my drivers but was hoping there was a way i could install just the OS and download the drivers after. I do have the original product key for the HP. Now when i start up it says "No bootable disk-- insert boot disk and press any key" or "Media test failure, check cable". Even with before mentioned re-installation disk inserted. When i goto Setup Utility: Diagnostics and run the Primary Hard Disk Self Test and the memory Test it Passes both. When i go to System configuration (f10) this is what i see[CODE]
View 2 Replies
View Related
Sep 25, 2012
I am facing blue screen of death for the past 1 year. I have changed the hard disk, motherbord as well as processor still I face the same problem.
My system is Dell n5010
Processor Intel Core i3
300gb HDD
4gb RAM
View 1 Replies
View Related
Nov 11, 2012
Originally got message - Disk read error occurred press ctl alt del to restart. Then tried plugging this drive using a USB connector into my desktop PC to see if I could run some chkdsk. Then my desktop PC displayed messages telling me my firewall and virus software had been turned off and the computer crashed. ROOTKIT? So I was left with 2 drives not working. I re installed windows on desktop but using ISO on flash drive BUT can't on the 500GB Hitachi HTS545050B9SA00 for some reason. Windows setup loaded and Deleted old partitions and formatted. When I tried to install, it froze. It now just boots up with a windows loading screen and I'm also unable to boot from flash drive as it freezes. This is on a Sony Vaio VPCEB4E4E.
View 2 Replies
View Related
Nov 26, 2012
i can not install dual-both window7 and window8 on my computer.i think that may be my hard is dynamite.not basic.
View 13 Replies
View Related
Sep 8, 2011
I'm not sure why this came up?
Also if I just boot it normally I get a picture & it freezes?
View 5 Replies
View Related
Mar 10, 2011
I've been using my Ps3 controller as an alternative to an Xbox 360 controller on my PC (to play games with a gamepad) but in order to use my Ps3 controller as a makeshift 360 controller, I need test signing enabled.
Unfortunately with test signing enabled I get a big ugly watermark at the bottom right of my screen, as far as I know the only way to disable this is to disable test signing, otherwise it just won't leave! Is there any way I can get past this and somehow keep driver test signing enabled but get rid of that horrid watermark ruining my gorgeous wallpaper?
View 2 Replies
View Related
May 5, 2012
I laptop is Windows 7 celiron processor, just a month back suddenly it is giving an error saying "Error to detect Hard disk". I tried to run diagnostics on hard disk, it says no disk foun, replace.
View 6 Replies
View Related
May 29, 2012
I have this WD My Passport external portable harddrive which I have used for a couple of years. I was writing something to the drive one day when the USB connection seems to be somewhat loose and the drive disconnected momentarily and reconnected itself but the file I was trying to write ended prematurely...Now when I try to use the Seagate Harddrive test tool for windows and do a Short Generic test and the result failed.. I am fear it might have been caused by the disconnection and might eventually corrupt the entire drive... I try to run chkdsk but there aren't any errors detected it seems and files seems to be accessible as normal... Is there a way to fix the harddrive without losing data in the drive or confirm the drive is indeed failing?
View 3 Replies
View Related
Feb 6, 2011
Can someone do a speedtest using the server in New York, NY?I've been getting an latency error everytime. Other servers work fine and the one in New York worked before. It's the one that's nearest my house, so that's what I generally use.
View 1 Replies
View Related
