Windows 7 Hard Disk Error?

Dec 18, 2011

Ok so I had the windows 7 anti virus 2012 on my computer. I used these fourms on BC to try and help and get rid of it and I thought I had. So I downloaded microsoft security essentials to see if I had any remaining viruses and left for work. When I got home from work It said there where errors/threats and that I needed to restart my computer so I did so. But when I tried to restart it I got the Start Computer Normally or Do a system Repair screen. I tried to start my computer normally but whenever I do I get the Hard Disk error message it reads like thisHard Disk ErrorPlease run the Hard Disk Test in System DiagnosticsHard Disk 1 (3f1)F2 System Diagnostics for more information,

[url]...

I restarted my computer again and that same menu popped up with the Start computer normally or Do a system repair. So I attempted a System Repair it took hours but nothing happened. Am I just being Impatient or is my computer wrecked?Here are my specs:Microsoft Windows 7 Home PremiumProcessor Speed: 2.13 GHzRAM 4 GBIntel Core i3 330MGraphics Card Intel GMA HDStorage Capacity 320 GB

View 2 Replies


ADVERTISEMENT

Hard Disk Error 'disk Structure Is Corrupted And Unreadable'

Sep 10, 2012

I have IOmega 1 TB hard drive. 2 days ago, my comp restarted suddenly after which my external drive is corrupted.I get the error 'H: is not accessble' The disk structure is corrupted and unreadable.It shows up in the disk management as RAW file system,I have almost 700 GB of important documents, pictures & files that I don't want to lose.Does anybody know of any good recovery software that can help.

View 5 Replies View Related

Error In Installing Windows 7 / Installer Can't Detect Hard Disk

Nov 7, 2012

I messed up whilst installing windows 7 over older windows 7 drive. I formatted the windows 7 drive and again tried to deleted that partition, but that deletion process took around 10-15 minutes, so restarted my system. Now i cannot install any of the windows os or even linux.

View 2 Replies View Related

Error In Installing Windows 7, Installer Can't Detect Hard Disk

Nov 7, 2012

I messed up whilst installing windows 7 over older windows 7 drive. I formatted the windows 7 drive and again tried to deleted that partition, but that deletion process took around 10-15 minutes, so restarted my system. Now i cannot install any of the windows os or even linux.

View 1 Replies View Related

Error In Installing Windows 7, Installer Can't Detect Hard Disk

Nov 7, 2012

I messed up whilst installing windows 7 over older windows 7 drive. I formatted the windows 7 drive and again tried to deleted that partition, but that deletion process took around 10-15 minutes, so restarted my system. Now i cannot install any of the windows os or even linux .

View 4 Replies View Related

Unable To Install Windows To Hitachi Hard Drive - Disk Read Error

Nov 11, 2012

Originally got message - Disk read error occurred press ctl alt del to restart. Then tried plugging this drive using a USB connector into my desktop PC to see if I could run some chkdsk. Then my desktop PC displayed messages telling me my firewall and virus software had been turned off and the computer crashed. ROOTKIT? So I was left with 2 drives not working. I re installed windows on desktop but using ISO on flash drive BUT can't on the 500GB Hitachi HTS545050B9SA00 for some reason. Windows setup loaded and Deleted old partitions and formatted. When I tried to install, it froze. It now just boots up with a windows loading screen and I'm also unable to boot from flash drive as it freezes. This is on a Sony Vaio VPCEB4E4E.

View 2 Replies View Related

Error In Partition Of Hard Disk

Apr 30, 2011

i am installed using Windows 7 ultimate 32bit now. i tried to partition the extended hard disk in my new pc but it shows the error as " no available memory to partition on your computer" so what i do, still there is 215GB of free space with good health.

View 3 Replies View Related

Hard Disk Reporting Error

Jan 19, 2013

hard disc reporting error

View 3 Replies View Related

Hard Drive Disk Error Occurred

Apr 14, 2012

This is kinda long and I've fixed it, but could use your input. So after waking up, my parents informed me that the computer was shutting down randomly. I turned it on and "a disk error occurred press ctrl+alt+del to restart " appeared. It's a Sata hard drive so I checked the cables to make sure they were plugged in correctly and they were, and then I tried connecting it to another computer with that computers cables and that didn't work either. My parents not wanting to buy one online, decided to just go to bestbuy and buy one there, since we already had the Windows 7 Disk at home. I formatted it, partitioned it, and installed Windows 7 Home Premium on it and everything worked. I decided to connect the Hard drive that didn't work while the computer was still on, and it immediately started downloading the drivers it needed and up popped all the hard drive. I'm going to start transferring all the important things like music,videos and games, and after, all I can see are the following 3 things; after getting all the data we want off it, should I reinstall windows to see if my other computer will recognize it (Even though it couldn't before), format it and just use it as extra data (though since it already couldn't boot up, the ability to keep data on it may fail in a couple of days/weeks) or just put it away and not use it at all.

View 3 Replies View Related

Imminent Hard Disk Failure Error

Aug 29, 2012

2 days ago, my laptop stopped working and when I rebooted it, it didn't let me get into windows and took me to startup repair and after 24 hours, nothing happened, so i decided to reboot my labtop again (while it was doing startup repair still) and i used recovery cd to try to repair but it said "Imminent Hard Disk Failure" and i click continue with the startup repair, my CD work ( got into the options) and i chose startup repair and it work but after that i gave me that my Hard Disk Failer

View 8 Replies View Related

Run Diagnosis On Hard Disk And The Test Result Is A 303 ERROR?

Dec 15, 2012

I am using windows 7 64 bit on my hp pavillion g6 laptop (g6 - 1118tx model) and the warranty is expired . Well I ve got 2 problems , please read the whole problem and provide some solution. Around a week back my Laptop got struck(edit - windows 7 os got struck .. hangs .. watever) so i have restarted it , but when i did it showed some error message "windows was unable to start your system" something like that .. I tried safe mode,installing windows again and even recovery disks that i have got but all of them did not work outso i have run diagnosis on hard disk and the test result is a 303 ERROR , which turned out to be a hard disk crash when i googled about it.. But i need to back up my data , so did some research and used UBUNTU live cd to back up data , which worked fine and i am able to back up all the drives except the C drive (may be C drive got crashed).

I thought i need to buy a new hard again but i saw install option in ubuntu live cd and ubuntu got installed and in the processing of installing I FORMATTED 2 drives as EXT PARTITIONS (do remember this point).. After that I installed windows 7 on another drive (not C drive) which worked but now the system is very very very slow , you cant imagine how slow it is , takes 30 mins to copy 500 mb file, 5 mins to open my computer.. So now my problem is ... Should I replace my hard disk ??, because when i asked friend of mine in service center he said its better to replace, because even though its working now he said it may crash again in future and who knows the whole data might be lost If I dont want to replace, can you guys provide any solution to speed up my system ?? Do you remember the point about partitioning 2 drives as EXT in ubuntu (refer above) .. well those 2 drives i am unable to format in windows 7

View 1 Replies View Related

Fix Boot Error When Extra Hard Disk Connected

Oct 17, 2009

Background:-

System Gigabyte X48T, 4G ram, usual bits. Video

Sata Port 0&1 - Gigaraid 2x 750G Raid 0 - Scsii disk Boot.

Sata ports 2&3, 4&5, 6, - 5x 500G 2TB dynamic GPT Raid 5

Sata Port 7 -1x 750G Roms & software disk.

Rocket Raid Scsii 0_1, 5x1TB in raid 5.

Scsii 0_0, 1x500G JBOD.

Problem is here.

I have been trying to get this system ready to do extensive HD video editing and multimedia work so thumbnails are critical to sorting out 1000's of clips. Vista just doesnt show thumbnails. I have been waiting years for Windows 7.

This system is fast. Boot drive reads at over 160MB/s sec. The 2 Raid 5 arrays can copy to each other at 250MB/s plus (for multi GB files). Interesting HDTach 3.0.1 only shows 160MB's for the Highpoint array.

They will have to fix their software..

In the last few weeks the system had become very flakey - Windows 7 x64 & vista x64 system -video thumbnail display & codec errors etc, windows explorer hangs, system corruption, bad software & codecs.

The boot manager from the latest (Paragon i think) partition manager for windows 7 got stuck on resize partition and it doesnt time out. I want my pc to be always on for remote access..

Anyway the system finally crashed. I lost one of the Raid0 boot disk array IDs when I tried to delete the boot manager. One disk offline and array gone. 60 hours, 400G of newly imported video from 8mm tapes..

So I decided on clean install just windows 7 after I recovered the data on the raid array.

To that end I removed all the other disks, took a single clean disk and installed vista on it.

Then I went to Bios and deleted the GigaRaid array and recreated it with the original 2 disks.

Changed the boot order in Bios to the first Sata.

Back into windows, initialise the GigaRaid array in windows disk management -Do not partition or format it. Load GetBackDataNTFS and

scan and copy all of the data back to the spare space on the new boot disk.

When I was totally happy I had everything back I loaded Windows Disk management and partitioned the GigaRaid into 250G and 1200G. Formatted the only the 1200G and copied on all of the drivers..

I then shutdown and removed the Vista hard disk and restarted with the Windows 7 DVD. Loaded the Gigaraid drivers and proceded to install Windows 7.

On first reboot, error 80xxxx .

Back to setup and disk management. Delete the new 250G partition and let Install do its stuff. So it creates a 100MB "system" as the first partition then 260G for the C drive and installs itself.

Whoo hoooo! it works.

I shutdown and add the GPT array and the single Roms drive.

Into Bios to set the boot to the Scsii Gigaraid & restart and the dynamic array and Roms disk is there.

Shutdown and install the RocketRaid Card with its 5 disks attached.

Back to bios to set Boot to Scsii Gigaraid.

It always puts Sata 0 first.

Or Scsii 0_1 (the RocketRaid).

Boot back into windows and everything is where it should be.

Clean and fast too. Install all of the software I need.

Now I have a nice system. Time to copy the video I recovered onto the Raid5 array.

So I plug the sata cable into the disk and go into the Highpoint management to scan the disk. Come up ok and is visible in windows.

I copy the data over to the raid.

The I decide to see it the computer will reboot back into windows unattended.. Nope! Screen fills with rubbish that looks like Linux. Says changing boot disk, then stops.

I go back into Bios and reset the boot disk back to Scsii 1_0 (GigaRaid)

Reboot and press F12 for the boot menu. Select the last item - GigaRaid.

Boots back into that Linux looking system (says debian).

I disconnect RocketRaid disk 6, Scsii 0_1 and back to bios and set to Scscii 1_0, Gigaraid, reboot back into windows..

Plug the Rocketraid Scsii 1_0 and reboot - back into Linux?


Question is..

1 What is the purpose of the 100MB that windows installed onto the boot disk.

2 how do i find the boot manager that screws the system when I connect a new drive (including USB key).

3 How do I force the boot to the correct disk array regardless of which drives are installed or not.

4. Is there a boot "something" I can install on every disk to point to Scsii Gigaraid

View 3 Replies View Related

Bluescreen Error - Boot From The Hard Disk The First Time

Dec 17, 2009

The drive had windows xp on it from another build so i just used it to test. It booted xp fine. It only showed 3gb of ram but i think that was due to it being 1066 and needing me to change bios ram settings. So i took my full version of windows 7 professional that i have used to install on my laptop too and tried to install. I formatted the drive completely and chose to install. It goes through the paces installs.

Then when it is supposed to boot from the hard disk the first time it give me a brief blue screen PAGE_FAULT_IN_NONPAGED_AREA so i research it and see it can be linked to hard disk or ram. So obviously its not the disk its been running xp fine and so has the ram. But just in case i switched out the ram with 1gb of old ddr2 800 i had from another build. Same error. I then tried my new ocz ram with a single chip thinking its a dual channel problem. Same error. So then i reburn the microsoft professional image to a new dvd r go through the process again and reformat and still the same error. I have tested all i know to test. Any other ideas?

View 1 Replies View Related

Hard Disk Giving Error After System Format

Dec 26, 2011

i am using windows 7 os. Actulay i format the system. after formating system whn i login , i am getting msg "windows detected hard disk problem and you may loss datas from ur drive c,d & e" bt my system condition is good.wt should i do for this?hw can i clear this error? pls help me

View 1 Replies View Related

Disk Read Error Occurred (Hard Drive Not Faulty)

Dec 3, 2012

Computer is a Sony Vaio VGC-RC110G (not sure about motherboard). About 3 weeks ago computer starts refusing to boot giving errors that make me think the hard drive is bad. Computer will still occasionally boot after 5-10 tries. I bought a new hard drive and tried to create an image of the old drive onto the new using Clonezilla, the process gave a few errors. The computer flatly refused to boot from the new drive (gave disk read errors). However, when I could boot using the old drive, I could get in and explore the image of the new drive and the image copy process seemed to have worked okay.

As part of the disk image copy process, my new drive had 2 partitions and about 900 megs of free space. The two partitions were the main windows partition from the old drive and the recovery partition. I combined all partitions and formatted the new drive (using Gparted) because I thought that the disk image copy probably just recreated errors in the old drive onto the new. After the format, my computer then consistently refused to boot from either drive. (in the past I could boot to the old drive after a couple of tries). The error was usually "a disk read error occurred' or "BOOTMGR is missing."

Attempts to install windows using windows install DVD failed because computer couldn't write to the new hard drive. Both hard drives would usually appear in bios when I entered into it (I know at least one time where neither appeared in the bios), although sometimes computer would fail allow me to edit bios altogether. I attached the new hard drive to a different computer and installed a clean version of windows 7 Ultimate x86 to the new drive. The different computer boots just fine from the new hard drive. But when I move the new hard drive to back to the old computer I consistently now get "a disk read error occurred" error.

I don't believe it is a SATA cable issue because power to drive seems to be fine and I had to use the SATA cable from the old computer when hooking the drive up to the different and it worked fine. Also, Gparted recognizes the drive just fine and has no problems formatting partitions etc., so there is communication happening through the SATA cable and the power cable is powering adequately.TL;DR summary: New hard drive works fine with new computer, but old computer (when connected to same new hard drive) gives me a "disk read error occurred." Based on the evidence, I don't think it's a faulty drive issue. I'm also skeptical that it's a cable issue, but haven't 100% ruled out this possibility. What should I do next in terms of identifying the problem? I've currently exhausted my (admittedly limited) hardware troubleshooting .expertise.

View 1 Replies View Related

Mirrored Configuration - Hard Disk Failure Error / Replaced With SSD?

Sep 10, 2012

My existing dual boot winxp/Windows 7 mirrored configuration appears to have issues. I ordered a SSD hd today from newegg. Question: new install, or just re-image the SSD? If I do new install, do I have to have a authorization from Microsoft? I purchased this Windows 7 Professional 2 years ago...

View 1 Replies View Related

Continuous Blue Screen Error - Changed Hard Disk / Motherboard And Processor

Sep 25, 2012

I am facing blue screen of death for the past 1 year. I have changed the hard disk, motherbord as well as processor still I face the same problem.

My system is Dell n5010
Processor Intel Core i3
300gb HDD
4gb RAM

View 1 Replies View Related

Change Dynamic Hard-disk To Basic Hard-disk?

Nov 26, 2012

i can not install dual-both window7 and window8 on my computer.i think that may be my hard is dynamite.not basic.

View 13 Replies View Related

Error Saying "Error To Detect Hard Disk"

May 5, 2012

I laptop is Windows 7 celiron processor, just a month back suddenly it is giving an error saying "Error to detect Hard disk". I tried to run diagnostics on hard disk, it says no disk foun, replace.

View 6 Replies View Related

Optical Disk Installation Of Windows 8 After A Hard Disk Crash?

Oct 22, 2012

I purchased a new PC with Windows 7 in June 2012. It came with a Samsung optical disk containing Windows 7. I am eligible for the $14.99 USD upgrade to Windows 8.Will there be an installation disk for Windows 8 available at this price and if not, then how much more will it cost?If not, then how should I ensure that I can easily install Windows 8 after a hard disk crash? Do I have to keep my Samsung optical disk of Windows 7?

View 5 Replies View Related

Hard Disk Is Empty And Windows 7 Os Shows Disk Usage Is 75%

Jul 20, 2011

in my hardisk with G: size 465gb xp shows that 74.86 gb is remaining space......while space used is 0 , there are no hidden files, nothing in the disk K: size 186gb same as above and remaining is 35 gb according to windows xp i: size 196gb .in this only 9 gb is used and xp shows that 10gb is remaining//

i remember, last week everything was ok and all of sudden this problem has occurred. all other drives are ok only these three are way over their own heads.

my system is

Intel Core i5-2300 cpu@2.8ghz
2.79ghz,3.48 GB of RAM
and windows is 32 bit/

View 2 Replies View Related

"Disk Error" Invisible Except To Event Viewer, When Imaging Hard Drive

Jul 13, 2012

My Windows 7 configuration is relatively bullet proof (ha ha, nervous laughter).My OS and programs are on C, which I image using RDriveImage every month after Patch Tuesday.My data is on software-mirrored D/F drives.So as long as I don't have a catastrophic event affecting my computer, a routine "drive failure" should be recoverable, with the worst-case being I'd be out a month of updates, but with a good recent image of the OS drive.Anyway, I was recently looking at my event viewer and I have "Disk errors" that occur whenever I run a full image of C.

The complete error text is:

Quote: Log Name: System
Source: Disk
Date: 7/13/2012 3:38:44 PM
Event ID: 11
Task Category: None

[code]....

There were two errors in February (none before that), three in March, four each in May and July.In April and June I did incremental images, so the "bad" area wasn't imaged, so no error.With all the above as background, what's the safest way for me to isolate and/or repair the area(s) of the disk with the errors?The errors are always logged within 1-2 seconds of each other, so I suspect it's just one bad area.And I have never, ever, seen signs of a disk error. No BSOD, no clicking noises, no impaired performance, even for a moment.

View 9 Replies View Related

Windows 7 Virtual PC: "Cannot Attach The Virtual Hard Disk ..." Error?

Sep 6, 2012

Got a new Windows 7 Enterprise 64 bit machine, found that it did not come with virtual PC. Downloaded the critical patch Windows6.1-KB958559-x64-RefreshPkg.msu and installed it. Windows Virtual PC shows up in my Start Menu. Good so far. I go through the steps to create a virtual machine and use the option to 'use an existing vhd file' and when I click 'Create' I get the above pop-up message "Cannot attach the virtual hard disk to the virtual machine. Check values and try again". A factual message but completely useless as with all error messages from Microsoft. I have tried the following:1. When I attach that vhd using Disk Management, it mounts in drive E:, I can see the files and browse the dirs in E:. In the Disk Management View, the drive shows up as 127 Gigs but 107 is unallocated space. The physical size of the vhd is only 25 Gigs2. Others in my company were able to create the virtual machine with the same vhd, checked the byte size and timing, so nothing is wrong with the vhd file itself.

3. Tried to create after shutting down all virus protection including the Micorsoft antimalware protection service. No luck4. Tried Vhd resize to resize the vhd to a smaller size (since it showed up in disk management as 127 Gigs, I thought maybe it was that size), but VHDResizer could not open the input file, gave an errors "Can only load fixed or dynamic drives"

View 3 Replies View Related

Hard Disk Boot Failure Insert System Disk Press Enter

Mar 29, 2012

im usin 2tb segate new hard disk sir..in my system i cant able to boot my os and also my hard disk...its showin that hard disk boot failure insert system disk press enter ...i restarted many times its sayin the same problem...in my gigabite mobo bios my hard disk is not get detected sir....the problem is that wen im installin the new os for 2nd time its all went nice only sir but at the completion of the os it wil ask for the user name and password but in my system its frozen sir fully of black screen and i cant able to do anythin so i restarted my system from that im gettin this error as hard disk boot failure insert system disk press enter.....that my new hard disk and all of my data is in that hard disk only..this problem arises wen im installing the os for 2nd time sir.

View 6 Replies View Related

Can I Install Win7 On A New Hard Disk Using A Upgrade Disk ?

Nov 13, 2009

I have few questions on Windows 7 Upgrade. Currently I'm using windows vista home premium 64 bit and I bought an windows 7 home premium 64 bit upgrade disk.

first thing is I want to format my previous operating system and all the data in my laptop and install windows 7 in it using the Upgrade disk.

second thing is I don't have my vista installation disk with, my laptop was pre-installed with vista so in future if I want to switch can I get back VISTA using system restore.

third is can i install windows 7 on a new hard disk using a windows 7 Upgrade disk?

View 4 Replies View Related

BOOT DISK ERROR: INSERT SYSTEM DISK AND PRESS ENTER

Feb 17, 2010

I have been having a bit of trouble with windows 7 lately, namely that it won't start up right. When I boot from the drive normally, it gives me the classic "BOOT DISK ERROR: INSERT SYSTEM DISK AND PRESS ENTER" message.

However, I soon discovered that if I boot from the Windows 7 cd and do not boot from it (By ignoring the "Press a key to boot from CD or DVD..." Windows 7 boots up fine.
I've tweaked my BIOS over and over, but the same problem persists. The drive is brand new and fine. What can I do?

View 10 Replies View Related

Disk Read Error And Recovery Disk Not Working?

Mar 14, 2012

i have a toshiba satellite C650 that has recently come up with a disk read error. I want to access the command prompt to try some potential solutions that I have read about on the internet. I have made a Windows 7 recovery disk using my other acer laptop which also has Windows 7 installed. When I use the recovery disk and it has loaded the files etc it just brings up a black screen and the cursor. I tried booting my acer laptop from the recovery disk and it worked fine. why I am getting the 'disk read error - hit ctrl, alt and delete to restart' message?

View 6 Replies View Related

How To Format Hard Disk With Windows 7

Apr 25, 2011

I have got a laptop with win 7 on it. There is only one drive in laptop which is C: , I want to wipe the hard disk and install win xp professional on it.1- How can i format the hard disk which has win 7 on it?2- After formating the hard disk, would i able to install the window 7 through recovery disk which i have already made incase anything goes wrong?

View 6 Replies View Related

How To Install Windows On A Hard Disk

Nov 13, 2012

I bought a new laptop two weeks ago, the os it is running now is windows 7. . There is only one hard disk insideit in 300 gb but in my computer file it is two seperate hard disk.You can see that there are two hard disk one in 99.9 gb, and another is 198 gb. But the windows was installed in 99.9 gb but still i can access the files in 198 gb.

View 9 Replies View Related

Windows 7 Won't Boot From Hard Disk

Mar 2, 2012

I converted my 500 gb hard disk to DYNAMIC DRIVE. now my windows 7 won't boot from hard disk. what will i do?? is there any way i can recover my files..??

View 8 Replies View Related

Cannot Install Windows To This Hard Disk

Feb 10, 2011

I got a Dell Inspiron 6400 with XP and I'm trying to do a clean install of Windows 7 but this message shows up, any ideas how I can get passed this?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved