i have a toshiba satellite C650 that has recently come up with a disk read error. I want to access the command prompt to try some potential solutions that I have read about on the internet. I have made a Windows 7 recovery disk using my other acer laptop which also has Windows 7 installed. When I use the recovery disk and it has loaded the files etc it just brings up a black screen and the cursor. I tried booting my acer laptop from the recovery disk and it worked fine. why I am getting the 'disk read error - hit ctrl, alt and delete to restart' message?
My laptop has been experiencing the disk read error on startup. I called Sony (I have a Sony VAIO Laptop VPCF130FD) and they put me through all these steps including trying to boot up the recovery partition of the drive. Through the steps taken, they think that the OS is corrupt as the computer had been freezing before.The only step that has taken effect is the reset default values of the BIOS. When the recovery partition is selected it hangs between the "Starting Windows" screen and the first recovery screen.Sony wanted me to pay $60 for discs to be sent to my house, but I am building a gaming desktop PC so I thought I would just buy the OEM System Builder Win 7 Home Prem x64 and use that disc to install as I have the product key my laptop uses.So I bought the disc today and booted my laptop off of it but like the recovery partition, it sits between the Start Windows screen and the first install screen.
TLDR: I get the "A disk read error occurred" error but the system disk is readable and checks OK in the recovery USB. So, I have two hard drives--a terabyte drive with some data on it and a smaller drive with the Windows 7 installation on it--and a USB drive. I made the USB drive into a recovery USB using the instructions here Installing Windows 7 System Recovery into USB Flash Drive | Raymond.CC Blog with the addendum found in the comments. I made a system image of the smaller drive via the control panel and then put the image in the terabyte drive. I then replaced my smaller hard drive with a new drive of a comparable size.In order to restore the drive, I booted into the recovery USB, formatted the new hard drive with ntfs, made it active, and ran wbadmin start recovery -version:xxx -items:C: -itemtype:Volume -backupTarget:C: -recoveryTarget: where C was the terabyte drive and D is the new drive. I may have the drives mixed up here, but I assure you I had them correct when I actually ran the command
After a reset, I got some generic error so I went back into the bios, and set the new drive to be at the top of all boot lists, and then rebooted. It was at this time I got the above error. I feared that my drive was actually DOA, so I booted back into the recovery. I did a D:;dir and saw that all of my old files did indeed exist, so I figure it was a boot issue. I ran the boot repair utility in the recovery menu and it said there were no errors and I should restart. I didn't restart, and instead ran a chkdsk D: /f and found no errors. I did a bootsect /nt60 /all /mbr and restarted and still nothing changed. I even tried a "bcdedit /timeout 10" and I do not see the boot loader before getting this error. Not sure if that is expected or not but I'll throw that in here.
I have an Acer Aspire One Happy and have got this message:
"A disk read error occurred Press Ctrl+Alt+Del to restart"
I have been searching for solutions all day but I can't do any of the options described. Pressing f8 to enter safe mode does nothing, nor does alt+f10. I also don't have a cd drive as its just a netbook and no recovery cd came with it even if I did have a portable one. Anyone have any ideas? I'm on a boat in the Arctic for the next month and without my laptop I will likely jump off an iceberg!
Every time i boot my computer i receive this message, after several restarts my system will load up the windows, n i can use my PC,,, n if i turn on the Pc after some hours same error message again.. have restart my system several times to get it work... What's the problem here... i think it's not hardware problem if it was it wouldn't have booted up my OS after several restarts... Is this something gotta do with registry, after messing with registry i have started to get this message, Is re-installing my Operating System only the solutions.
I have a 1TB Seagate external drive connected to my computer. When I start the computer I get a Disk Read Error. If I disconnect the external drive, Windows 7 loads properly. Apparently, my system is trying to load Windows from the external drive.
So, how can I get my computer to ignore the external hard drive at start up and load Windows from my C drive (as it always did on my old XP machine)?
I have been using Windows 7 7100 for about a month or so now. I was using my computer like usual, nothing out of the ordinary, when it started running very slowly. I rebooted the machine, and got this message:
DISK FAILURE, INSERT SYSTEM DISK THEN PRESS ENTER.
I did that, and got this:
"Windows has encountered a problem communicating with a device connected to your computer.
This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removable storage is properly connected and then restart your computer.
If you continue to receive this error message, contact the hardware manufacturer.
Info: An unexpected I/O error has occurred. "
After that, I went on to run startup repair. I fixed it, went on to using my computer until the same thing happened again. I did the same process I did above, but the power went out while it was repairing, and the computer shut off. When I started it up again, I got:
A Disk Read Error Has Occurred.
Press Ctrl+Alt+Del to restart.
I can't get past this point. I would really love to save the data I have on there. Is there anything I can do to fix this problem?
So, about 2 weeks or so ago my PC was working perfect, no issues whatsoever. Then about 2 - 3 days after I went on my PC and things just froze up, I couldn't shut down properly because it was just stuck froze. So I shut down using the button, but when I turned it back on I got "Disk Read Error Occurred". So I left my PC off for a while and it worked again after a few restarts, but it seems to keep coming back, my PC also sometimes freezes up.
I've reached the last straw with my attempts to install windows 7 64 bit onto my PC the story goes as this;
I needed to upgrade from windows XP 32bit to Windows 7 64bit however when I installed my first Windows 7 package I didnt realise but it was infact 32bit so to my annoyance I reformatted back to XP 32bit, (I need 64bit to run several things on my computer such as high end games) in the mean time my family told me they wanted windows 7 on their PC, so using their PC I created a USB boot disk and used it on my bare-bones PC (The one I'd recently reset to XP), this brought up my first Disk Read Error.
Annoyed I tried a few different ways of making a USB boot only to always be brought to the same error, deciding to do the family PC first I used the same boot which had brought up an error on MY PC in my families PC and it worked like a charm. Not a single issue and Windows 7 64bit was installed within the hour. USing this new platform I created a -new- USB boot disk thinking that if I made a 64bit boot off a 64bit system it would have more luck ... No it didnt.
I've tried all sorts of BIOS options but every time it just brings up the same error, I attempt to change the 64bit bootsect.exe to a 32bit one and it didnt bring up the error but then told me files were corrupt. I have unfortunatly only got one ... long ... answer left.
I install windows 32bit again, then use that platform to clean install 64bit windows7 but I doubt that'll work.
For the record I KNOW I cannot upgrade from 32 to 64, I WANT to do a CLEAN INSTALL!
I tried to make a small 7gb partition on a separate drive and it worked fine. I had already had this drive which is a 1tb drive partitioned as follows: 500bg and 500gb. So I booted using my xp disk and it part. and when it restarted I got the following: "a disk read error occurred. Press Ctrl+Alt+Del to restart".
Now I can't install xp because it won't find the 7gb partition on restart and I no longer can boot into Windows 7. I tried running Windows 7 startup repair but it says:
"startup repair cannot repair this computer automatically."
The first line of the problem signature is StartupRepairOffline.
Recently, I was messing around with my HDD's partitions in GParted. I resized my Windows 7 partition and made a new NTFS for Windows XP, and a new ext2 for Puppy Linux. I installed the GRUB Bootloader and all my partitions booted fine off of it except for Windows 7. I later found out this has something to do with the Master Boot Record and that I should install GRUB and then install Windows 7.
I was okay with this for a while, but Windows XP couldnt boot many applications from the Windows 7 partition because I have it's x64. I eventually realized that I hadn't made my Windows XP partition large enough (only 3 gig) for anything I wanted to do with it. After a few days, I just deleted the Windows XP and Puppy Linux partitions and was back to having just my Windows 7 partition. I was hoping everything would be magically better, but when I restarted my computer, the BIOS told me a "disk read error" had occurred and "press any key to restart".
I put in a Puppy Linux Live CD and opened up GParted again. GParted showed me that my HDD was now just one big block of Unallocated space. Then I looked in the lower-left corner of the screen and saw that I still had 4 partitions (sda1, sda2, sda3, sda4). sda1 is now my Windows 7 partition, sda2 is now my Windows XP partition, and for some reason sda3 and sda4 are both HP Recovery partitions.
I tried everything I could think of to save myself. I popped in the Windows 7 Upgrade Disk (I had been running Vista before) and tried the Recovery tools included with it, but the Recovery didn't recognize any partitions on my HDD at all. I ran a Command Prompt and tried all the options in bootrec fixmbr, but two of them didnt work and the other two replied "Element not found". Then I tried sfc /scannow, but that told me I had to be running Windows. I booted back into Puppy, ran GParted, and tried to make a new partition, but GParted told me that doing so would erase ALL data on the HDD. There's probably some more options I tried, but I can't remember them right now.
Can anyone help me out? I feel like I'm close to just backing up my personal files, wiping the HDD, and starting over. Only problem is I don't have anywhere to backup 150 gigs.
I was trying to boot windows 7 from DVD. but while installing I tried to delete my one partition to repartition it with larger size.but when I deleted that, my other two logical partition got deleted showing unpartition disk. No idea on how did this occur..I tried to create partition using XP DVD. but after copying the windows while it took restart, it showed the disk o boot error problem and I tried to boot again with Windows 7 DVD. but no help. everytime its showing the disk error message..
I'm trying to reformat my PC with windows 7 and i've made a boo-table USB which contains windows 7 on it.When I try to boot up from it it says A Disk Read Error Occured. It is not the USB sick itself as I've tried it on my laptop and it was able to boot from it.My BIOS setting indicate to boot from USB first.
My computer stopped working I keep getting an error message saying "disk read error", anyway I put the disk in an external case and connected to my laptop and my and it started ok so I could see all the data etc, anyway I bought a new hdd and put it in my desktop and tried to install a new copy of windows 7, but now when I go into my boot section there is no sign of my CD drive, only the hdd and the floppy disk drive shows up, so I am now stuck as to what to do?
My computer was working completely fine and I went to restart it and it wouldn't go anywhere after the boot scree just a read disk error. I restored my bios settings to default and still no luck. I then put in a windows 7 disk and went to repairs and did a start up repair got a harddrive error 0x0. When I go to look in my computer when I click browse, I can see my other hard drive, but my main one is still there but and no info. When I click on it, it asks if I want to format it. There are lot of important files I cannot lose.
I turned on my Sony vaio laptop and it got stuck on the Starting Windows splash screen. I tried to boot in safe mode but it loaded a bunch of files and then just stopped and never went to safe mode. I tried the system repair but after nearly 14 hours that didn't work either. System restore, scannow and chk dsk didn't work as well. Now I'm trying to reinstall Windows but it says disk read error and it won't load any further.
just installing RTM of Windows 7 to trial until my copy gets here. Hmm having a strange problem, i have installed os first time, after about 3 days, i get the read disc error on startup. (no safemode / F8 option).
now this has happened 2 more times after i had reinstalled. all about 5 days apart (multiple restarts and shutdown) i can't seem to find the source of the problem.
in the repair setup of the Windows 7 disc, i have done a startup repair, and it couldn't find any problems, "os loaded successful" log produced.
now if i use cmd and bootrec.exe /osscan on my c:/
it says zero OSs installed/found
although windows does detect it within the repair utility and when loading sata drivers.
what gives? what am i doing wrong? and why would it do this every few days after i reinstall the OS. its weird. Harddrive has been tested, no bad sectors, all scans of disc complete successful. is it the BCDmanager? and how do i edit that at boot?
bootrec.exe /fixboot and the other options do not work! also i does seem like my other drive letter have changed in boot CMD, however the os partition is still C:/ any ideas?
I install Windows XP to external USB HDD and Windows 7 to other USB HDD. I have been using boot from ext. USB HDD for years because internal HDD is too small at that time and I keep it that way until recently I got problem.
I change from Dell620 to HP8560 and immediately it cannot boot from WinXP on USB. The only message is "A disk read error occured. Press Ctrl-Alt-Del to restart". I try to install again without any error during the installation process, but same error once it boot from ext USB HDD. I still can boot Windows 7 on other ext. USB HDD. I upgrade it to Win8 Release Preview and work smoothly. When Win8 RP expired, I keep using it without upgrade because I usually use it for less than 2 hours. Suddenly it cannot boot again like WinXP on other USB HDD. "A disk read error occured." I cannot find anything wrong with USB HDD. I can still access all files on USB HDD from any system. I just cannot boot from it.
How can I know if this is hardware defect or recently Windows apply patch/update that make it cannot boot from USB anymore ?
Few days ago I install a Windows 7 on my HP Pavilion dv6000. It was ok for the first two days then started to get a message saying their is an error in system 32, and wants me to run f something utility (cant remember what it was). One night the computer was running fine, and shut down fine. When I start it up the next morning on boot I got a black scream message saying "disk read error occurred press ctrl+alt+del to restart" Doesn't help when I restart it. Then I burn a trail version of windows 7 onto a dvd from Microsoft website, and tried to reinstall windows during boot by pressing F9, selecting boot from dvd, but end up back at the same error message. I spend hours reading all over the net about this problem, and realize it could be one out of many problems. only understand about half the stuff I read
that the system doesn't recognize the Sata HDD on which Windows 7 is installed. I first thought the the HDD was done, because the system recovery couldn't be started and every action was followed with "disk read error". The next step I took was booting with Ubuntu live and there was the surprise, Ubuntu recognized the HDD and all the folders were there, so it seems the problem is not with the HDD but with the OS. What next step should I take
Looking for any help. System is AMD Dual core CPU, on Gigabyte GA-880GMA-USB3, 4 Gb Crucial Memory, Western Digital SATA hard drive, and Windows 7 Professional, 64 bit.After loading Office 2007, and updating it, I turned system off. This AM, I rebooted the machine and received the message that there was a disk read error and to press cntrl/alt/del. So far, there isn't any results from the attempts I have made to repair or boot the machine, including booting into command console to repair. It shows there is no operating system present.
I am working on a MSI CR620 laptop that is running Win 7 HP x64. On start up it says to press F3 for recovery, I have done that and have gone through the recovery, getting the post that windows has been installed completely, and to press ok to restart, after pressing okay, the computer restarts and I get the "Disk read error, press Ctrl+Alt+Del to restart again. I have ordered a recovery disk from the manufacturer, but I don't have warm fuzzys that it will correct the issue.
A week ago I started my computer and instead of booting up normally, the Disk Read Error (Press CTRL ALT DEL to restart) screen came up and when I restarted, it would just repeat. I used the Win 7 on my SD card to do a repair and it fixed the problem, but the same thing happened again the next day and the fix didn't work. After that I just gave up and wiped my drive, did a fresh install of Win7. Today I turned on my computer and the same error came up. I restarted and it got to the Starting Windows screen, but it just freezes there. At first I thought the OS was corrupt, but this time the error came up within a week...I'm not sure what the problem is. :S My SSD could be the culprit, but I want to make sure that it's not something else causing this to happen before I go out and buy a new SSD. EDIT: The Windows Repair screen won't come up unless I turn off the computer and switch off the PSU, wait for the light on the motherboard to go off, and switch PSU back on. If I don't switch off the PSU, the Windows Repair screen will never appear and it will just continuously say, "Disk Read Error".