Have had this message on my Dell Inspiron 1525 Laptop... Cannot not get into the system at all... I have tried the Dell start-up disk, tried the F8 on intial reboot and nothing is working...
I turned my computer on today. When I checked it some time later, I had an error of messages saying lots of files (mostly .dll) could not be found (or something along those lines). Explorer.exe kept crashing, before a constant bombardment of similar messages came up. After a while, clicking ok to all of them, the computer froze.When I tried restarting, I got the message "A disk read error occurred Press Ctrl + Alt + Del to restart"
I turned my computer on today. When I checked it some time later, I had an error of messages saying lots of files (mostly .dll) could not be found (or something along those lines). Explorer.exe kept crashing, before a constant bombardment of similar messages came up. After a while, clicking ok to all of them, the computer froze.When I tried restarting, I got the message "A disk read error occurred Press Ctrl + Alt + Del to restart"
I just got a brand new custom built pc. It had Windows 7 home premium before on it, and ran fine. When I put my disc of Windows 7 ultimate, it intsalled and on first boot, just crashed and showed " A disk read error has occured. Press ctrl alt delete to restart"
I am working on a MSI CR620 laptop that is running Win 7 HP x64. On start up it says to press F3 for recovery, I have done that and have gone through the recovery, getting the post that windows has been installed completely, and to press ok to restart, after pressing okay, the computer restarts and I get the "Disk read error, press Ctrl+Alt+Del to restart again. I have ordered a recovery disk from the manufacturer, but I don't have warm fuzzys that it will correct the issue.
I had Vista 64x and Windows 7 build 7057 set up in a dual boot with Windows 7 on a 30Gb partition.
Acting on advice in another thread I decide to shrink my Vista partition and expand my Windows 7 partition using GParted.
That seemed to go ok and I shrank Vista partition to about 400GB and expanded the Windows 7 partition to about a 100GB.
However, I now cannot boot at all. When I try I get "A disk read error occurred. press Ctrl+Alt+Del to restart".
When I try this nothing happens and I have to do a power shutdown.
I have attempted repairs using my Vista disk and that tells me nothing is wrong. Likewise I tried repair with my Windows 7 disk with the same result. Both tell me that the system booted succesfully.
I then tried reinstalling both Vista and Windows 7 to their respective partitions and I still get no boot and a Disk read error message.
I have been in the BIOS and tried every boot device option but still nowhere.
I'm writing this from the Asus Splashtop OS that came with my mobo. I thought it was a bit of a gimmick but it might just save me now!
The laptop is an HP Mini 1000 running Windows 7 Home Premium 32 bit. It was working fine and I turned it on today and the message: "A disk read error has ocurred Press Ctrl + Alt + Del to restart" appeared on the screen. Pressing Ctrl + Alt + Del just reboots but the same message appears again. F8 won't get me anywhere. Only F9 (Boot Device Order) and F10 (BIOS settings) are available but don't fix anything. There is no way to make it boot or even get to a repair screen or past it. Any suggestions to make it boot so at least I can get to the data and back it up?
My friend just called me up with the error in the topic title, that happened on his Lenovo G550.I've searched for a solution, but all I've seen is "run a data recovery" or "reinstall Windows 7" type of answers.I wouldn't be comfortable opening his computer up.I'm not sure how I would run recovery mode in BIOS or run a simple check for all the Windows 7 necessary files as it doesn't even boot up. (The error shows and that's about as far as it goes, except for BIOS).
I have a Lenovo Edge 14. The machine needed the battery charged, plugged it in, and then got "A disk read error occurred".Checked and reseated hard driveCreated MS Dos Startup disk and gets the same error reading from CD- RomI am trying to run Western Digital's Disk Diagnostic for DOS but cannot get the machine to boot from cd
"A disk read error occurred press ctrl alt del to restart windows 7" Above statement is the problem in my system.This appears when the system is booting. How can i repair my system?
After my Gateway LT280u loads the F2 and F12 screen a black screen Follows saying: "A Disk Read Error Occured Press Ctrl+Alt+Del to restart" I have tried and tried again to get it to start.
I have an Acer Aspire 5732Z here. A friend of mine had a disk in the disk drive and said that he opened the tray and the disk was no longer there, but actually inside the laptop. He managed to get the disk out but it went fully into the laptop. He did all of this while the laptop was still turned on. I dunno whether it turned off itself or he turned it off after that, but now it constantly comes up with A disk error has occured press ctrl + alt + del to restart on boot upI have downloaded ubuntu and placed it on a disk, and booted the disk up using F12, it goes to a purple screen for a bit, then goes to a black screen and doesn't do anything else
Looking for any help. System is AMD Dual core CPU, on Gigabyte GA-880GMA-USB3, 4 Gb Crucial Memory, Western Digital SATA hard drive, and Windows 7 Professional, 64 bit.After loading Office 2007, and updating it, I turned system off. This AM, I rebooted the machine and received the message that there was a disk read error and to press cntrl/alt/del. So far, there isn't any results from the attempts I have made to repair or boot the machine, including booting into command console to repair. It shows there is no operating system present.
When I start up my sisters computer I get the disk read error. with ctrl alt and delete to restart. I do this and it goes over and over and over again. if I can restart it to normal I get to own the computer. It is an acer aspire 5750G, windows 7. I cannot get it in safe mode because the error pops up! The computer has been overheated alot, as it turns off pretty quickly!!
I turned on my computer today to play a few games and it started to lag like crazy and eventually freeze. So I just turned off the monitor and went somewhere. 3-4 hours later, I came back to discover a message on my screen. It said "A disk read error occured. Please press Crtl+Alt+Del to restart."I did this a few times and the now I'm at a screen with the title of "msi mainboard". Part of the screen is cut off so yeah...
Initializing USB Controllers .. Done. *096MB OK USB Device(s) : 1 keyboard, 1 mouse Auto-Detecting IDE Master .. ATAPI CDROM Auto-Detecting IDE Slave... ATAPI CDROM Auto-Detecting SATA1 .. Hard Disk
[code]....
Anyways, after typing all that, I pressed F1 and it brought me to a Windows XP loading screen (must've booted from my hard drive that has WinXP) but now it's stuck on a black screen.
when my netbook was returned from the repair shop, my hard drive is already partitioned into two.it's bothering me so i combined them.i searched for it before doing it, its safe they said, just make sure the other drive is empty.it was a success. but after i turned it on again.. an error appeared. BOOTMGR is missingpress ctrl+alt+deletesince i dont have a disk drive 'coz its a netbook.. i have a spare disk of windows 7 starter 32bit.i copied it's contents on my usb.
I built myself a computer like today and it was working fine 3 hours ago and I shut off the computer. 3 Hours later, I turn it back on, it goes into the screen that says: "BOOTMGR is missing. Press CTRL+ALT+DELETE to restart". So I searched up some things and it says to put my Windows 7 installation disc in and repair it. But when I go into the repair mode, it gives me the error "the version of system recovery options is not compatible with the versn of windows you are trying to repair".
I constantly get this error everytime i try to boot up, i also cannot boot from a recovery disc for some reason as i just get the same error. I've removed the RAM and HDD and put them back but i still get the same.
Today i restarted my p.c after updating the windows 7 ultimate 64 bit.. but after i restarted it, suddenly the screen went black and this was displayed: "JLPRF is compressed Press ctrl+alt+delete to restart" i followed the command, and every time i did, the p.c restarted and the same message was displayed... i even check the cables,ram and other connection but every thing was fine.. I tried installing the windows again using the DVD, but no use.. The same message was displayed over and over again every time i restarted the rig.. (I never altered any bios setting)
I'm trying to install Windows 7 Home Premium on an old underpowered Dell Dimension XPS T700r with a P3 chip running at 700 MHz, 768 Mb Ram, and an old ATI Rage Pro 128 display adapter. It runs XP Pro just fine.All seems to be going well as Setup copies and expands files until the first reboot, when I receive "Disk Read Error, press Ctrl-Alt-Del to restart". This occurs using several different hard drives of sufficient capacity. It also occurs when I try the installation from a flash drive after mounting the Windows 7 ISO on Virtual Clone Drive from within XP. I've tried to install Windows 7 Starter but it, too, chokes at precisely the same point. I've tried all this on an similar machine with comparable but different components. Same result with all these attempts.I know I'm try to push the envelope in a downward direction here; Windows 7 Upgrade Advisor issues the standard warnings on processor speed, ram, and display adapter, advising that any installation will be sluggish and that the graphics adapter will not support Aero.
After switching on computer win7 x32 receive the error RPLUD is compressed. Press CTRL+ALT+DEL to restart After switching on your computer received the error RPLUD is compressed. Press CTRL+ALT+DEL to restart on a black screen with white writing when trying to boot into Windows.Also tried to system restore by inserting win 7 disk but its also not happening.I keep getting the following from all the restore points I try."System Restore did not complete successfully. Your computer�s system files and settings were no changed.
Details:System Restore failed to extract the file (C:) from the restore point. An unspecified error occurred during System Restore. (0x8000ffff)You can try System Restore again and choose a different restore point. If you continue to see this error, you can try an advanced recovery method. For more information, see What is Recovery?"
I have been having a bit of trouble with windows 7 lately, namely that it won't start up right. When I boot from the drive normally, it gives me the classic "BOOT DISK ERROR: INSERT SYSTEM DISK AND PRESS ENTER" message.
However, I soon discovered that if I boot from the Windows 7 cd and do not boot from it (By ignoring the "Press a key to boot from CD or DVD..." Windows 7 boots up fine. I've tweaked my BIOS over and over, but the same problem persists. The drive is brand new and fine. What can I do?
TLDR: I get the "A disk read error occurred" error but the system disk is readable and checks OK in the recovery USB. So, I have two hard drives--a terabyte drive with some data on it and a smaller drive with the Windows 7 installation on it--and a USB drive. I made the USB drive into a recovery USB using the instructions here Installing Windows 7 System Recovery into USB Flash Drive | Raymond.CC Blog with the addendum found in the comments. I made a system image of the smaller drive via the control panel and then put the image in the terabyte drive. I then replaced my smaller hard drive with a new drive of a comparable size.In order to restore the drive, I booted into the recovery USB, formatted the new hard drive with ntfs, made it active, and ran wbadmin start recovery -version:xxx -items:C: -itemtype:Volume -backupTarget:C: -recoveryTarget: where C was the terabyte drive and D is the new drive. I may have the drives mixed up here, but I assure you I had them correct when I actually ran the command
After a reset, I got some generic error so I went back into the bios, and set the new drive to be at the top of all boot lists, and then rebooted. It was at this time I got the above error. I feared that my drive was actually DOA, so I booted back into the recovery. I did a D:;dir and saw that all of my old files did indeed exist, so I figure it was a boot issue. I ran the boot repair utility in the recovery menu and it said there were no errors and I should restart. I didn't restart, and instead ran a chkdsk D: /f and found no errors. I did a bootsect /nt60 /all /mbr and restarted and still nothing changed. I even tried a "bcdedit /timeout 10" and I do not see the boot loader before getting this error. Not sure if that is expected or not but I'll throw that in here.
1. there's a folder in my seagate 1tb goflex external hard disk, which am unable to delete. wen i checked the properties it showed that the space occupied by the folder is 1.5PB!!!! its ridiculous n strange at the same time! if i try to open the folder it says "you need to format disk before you can use it".2. every time i try to copy some files onto/from my hard disk it says "can't read from source file or disk". i have some valuable data worth 700GB on my hard disk and am unable to transfer em onto any other device so i can format my hard disk.