i got only one disk and all of the partitions are dynamic i have low space on the system files partition so i decided to extend the partition i deleted a partition and had an unallocated space but i couldnt extend the the system partition i tried to install windows but it couldnt install on a dynamic disk
View 2 Repliesi have a hp laptap with a core i3 . with 8gig of ram. 500 gig hard drive. i made a 100 gig partion and it went to dynamic changing it back to basic. i read the mini tools application. if i tried that would it erase my hard drive if i went back to basic. all i wanted was a back up for my files.
View 1 Replies View Relatedi have a acer laptop having 500 gb hd. Isince i want to dual boot ubuntu with windows 7 i was planning to install it on Local Disk F so i shrink the Drive F for swap area required for ubuntu. I shrink it to 4500MB and new partition was created showing 4.5GB of space. Then i right click on it to create new volume. I keep on clicking next till a warning came.I click ok to that and my whole disk got converted to Dynamic disk. Now my problem is that my os is still booting even after converting to dynamic . I dont know how.
Since i have only one hd how can i use Partion wizard since i can't unallocate the whole HD.
I wanted to make a new partition on my hp laptop on the only disc it as.Unfortunately,because it came with already 4 partitions I accidentally turned the disk into a dynamic disk.Now its booting normally but I cant load the system Image that I have created before the partition.Other than that the pc is running smoothly.As I said this is the only disk on the system.Is it possible to convert the disk back to basic?After a lot of googling I found some exmples but all of them assumed you had a second disk on your system.Is it possible to convert the disk back to basic without having to reinstall windows?(I have no windows cd
View 4 Replies View Relatedi can not install dual-both window7 and window8 on my computer.i think that may be my hard is dynamite.not basic.
View 13 Replies View RelatedIn order to change back the format type of my system disk from Dynamic to Basic, I took a system image using Win 7 Pro System Image Tool and deleted all the partitions on the system disk, change the format type to Basic using the Command Prompt, and restored the image. Unfortunately, the format type restored also to Dynamic.Did I missed any step? or there is something wrong?
View 3 Replies View RelatedI have been reading up on it from microsofts site as well as various places throughout the web. most articles were also a few years old might have been before windows 7 was even released.from what I understand you will only really have an issue if you are using windows 98, 2000 , xp and server 2003.What I am trying to do is make a partition but the only way to do it so it seems (I am using the admin disk management tool)is to convert to dynamic.I am creating the partition to install a small linux distro to use in dual boot but the part that is making me weary is the last step of the disk management tool says "the operation you selected will convert the selected basic disk(s) to dynamic disc(s). If you convert the disk(s) to dynamic you will not be able to start installed operating systems from any volume on the disk(s)(except the current boot volume.now I will (hopefully) never have to deal with those headaches called OS's again. So would I have any negative impact from this conversion? would i still be able to boot windows 7 with all of my data still intact?
View 8 Replies View RelatedI am building a new computer with 1TB of HDD. At first when I started to install an OS, a system volume was created automatically of 100MB size. Then I created another 200GB partition as C to install Windows 7 and 2 other partitions of 250GB. I wasn't allowed to create another one partition. After I finished windows installation, I tried to create partition in unallocated space using > New simple volume. The sytem warned me of dynamic volumes > accept it. Then eventually all 4 volumes were converted to dynamic in disk management window.
View 5 Replies View RelatedI wanted to make a new partition on my hp laptop on the only disc it hasso as to create a system image.Unfortunately,because it came with already 4 partitions I accidentally turned the disk into a dynamic disk.Now its booting normally but I cant load the system Image that I have created before the partition.Other than that the pc is running smoothly. As I said this is the only disk on the system.Is it possible to convert the disk back to basic?After a lot of googling I found some exmples but all of them assumed you had a second disk on your system.Is it possible to convert the disk back to basic without having to reinstall windows?(I have no windows cd)
View 1 Replies View Related1) What is the major difference between Dynamic and Basic Volume It seems Dynamic volume can let you change the size of the volume up or down when there is an adjacent unused physical space, without impairing the files already stored. However Partitions (Basic Volume) can only be extended, and will always requires reformating.
2) It seems that Dynamic Volume has a lot more overheads, so it may be a little slower and actual file stored will be less, any opinion on that?
I did notice one of the Dyname Volume started to show massic missing storage space, e.g. Used Space of 30GB only has 7GB realy files on it, absolutely no hidden files there because I created the volume. This happens after shrinking and expanding it up and down a couple of time, BUG?!! If so it is a serious one.
so i got this cool Hp laptop... nice the bad part ... I had a single 500 gb Hard disk. only two partitions ... experimented to partition it ... 1. I upgraded my basic drive to dynamic drive ( got four partitions now) 2. My OS (win 7 home premium x64) is on one of the partiotion on the dynamic disk. QUESTIONS How do i convert back to basic... i only have my OS key no install cd? Can i take a back up or sys image that i can use later on after converting my hard disk to basic?
View 1 Replies View Related[FONT=verdana, geneva, lucida, 'lucida grande', arial, helvetica, sans-serif]I initially had 1 500gb dynamic disk, with one partition containing all my documents and windows files. I created a partition in the free space to copy my documents into so I could overwrite Windows keeping my documents intact. However I did not have enough free space for all my documents so after copying over one batch of files I shrunk the windows partition and extended my document partition. I had to repeat this again so I now have three extended document partitions.[/FONT] I then put in the windows CD, formatted the OS Recovery, SYSTEM Reserved and Windows parititions but then was unable to install Windows as it did not recognise any disks. I attempted FixMBR etc but to no avail.
I searched around and saw i may be able to change the sector hex from 42 (dynamic) to 07 (basic), but im wondering whether doing so will preserve the extended partitions i have? So my question is, will changing 42 to 07 preserve the extended partitions. Do I need to repeat for each 42 (like the link you posted) and then the three dynamic extended partitions will then become one basic partition? At the moment I can not actually see the data so have no idea how to back it up? Otherwise I would do as you say and back it up, format and copy back over.
[URL]
DISKPART: Acronis Disk Director (see documents spanned)
Active unDelete (again, three partitions)
HxD (showing 42)
So, basically im asking if i am safe to convert 42 to 07 WITHOUT losing any data?
I have a 500GB dynamic hard drive which had a Windows 7 install on it. I wanted to reinstall Windows, so from within Windows setup I formatted the system and Windows partition, leaving a partition containing documents and pictures (i was unable to delete them). From then, Windows seemed unable to recognise the disk so i searched in DISKPART and found that the disk was labelled as INVALID.
After Googling around it looks as though i can simply change the 1C02 in the hex from 42 to 07 - however, my only concern was that the documents i have on this drive are spanned across three adjacent (dynamic?) partitions - so i am concerned that by focing the disk to be basic i will lose the connection between these partitions. [URL]
DISKPART:
Acronis Disk Director (see documents spanned) Active unDelete (again, three partitions) HxD (showing 42) So, basically im asking if i am safe to convert 42 to 07 WITHOUT losing any data?
well scenario is I got my new dell 15r laptop with windows 7 basic loaded yesterday.. so backed it up and wanted to put my old PC's windows 7 ultimate version on it. I installed it, while installation it allowed to have only 4 partitions.it already had 2 partitions1) Recovery - 15gb2) something i forgot ... some 40MBso i made a partition of 125GB for OSand rest of unallocated space ie some 660gb could not be allocated in more than one partition so i let it be unallocatedso after installtion got completed and OS started i went in disk management and tried to make that unallocated space of 660GB in 2-3 partitions.but it converted all my previous partitions also to dynamic. even recovery partitions.ow do i go back to basic partitions?? particularly about that recovery partition and my C: (OS partition) ??
View 7 Replies View RelatedI've 4 Partition created on my Hard Drive..!!1. System Usable Partition (Reserved for System by its own)2. Local Partition (In which Windows is Installed)3. Another Partition (for Storage purpose)4. One more Partition (for Storage purpose)So, when today I tried to shrink my one of the partition (except system usable & C Drive/Local Drive) the the Windows alerted me with the Message : "Your Operating System won't boot after changing the drive to Dynamic Drive" ....!!After this message appears I clicked yes..!!The partition is been made
View 10 Replies View Relatedafter shrinking my hard drive it has changed to dynamics and i cant even install windows on a different disk,what shuold i do?
View 2 Replies View RelatedWhen I am trying to partition new drive from C drive. My C drive have 450 GB Space, so wanted to make a new drive of 250 GB. Did the basic steps but when clicking on Finish I get the following error "The operation you selected will convert the selected basic disk(s) to dynamic disk(s). If you convert the disk(s) to dynamic, you will not be able to start installed operating systems from any volume on the disk(s) (except the current boot volume). Are you sure you want to continue?".
View 1 Replies View RelatedI currently have a dual boot on my computer with Windows 7 and XP. Unfortunately as my computer is quite old my hard drive is not very big and with it being partitioned I am fast running out of disk space. So I tried to shrink the XP partition to allow me more disk space for Windows 7. Unfortunatley this would only let me shrink it by 83mb for some reason. I decided that since I barely use XP anymore that I would simply reformat the XP drive then try and merge them together. When I tried to format the partition it just gave the error "Windows was unable to complete the format". I then discovered in Disk Management that the Windows XP partition was the system partition which was causing the problem.
View 4 Replies View Relatedhttp://i49.tinypic.com/2w7i9ft.png
I want to be able to safely remove the D: partition in the image linked above. I can tell that I will need to change the Z: partition into the System partition to do so, but I cannot find out how.
The system:
Drive 1: vista boot loader, vista32, two partitions (vista on C, some stuff on D), both NTFS
drive 2: broken grub loader (never mind actually), one ntfs partition with some porn, games, and other usual stuff . named E.
so then, i copy the 7100 x64 distr into my flash drive, boot it, and install our beloved 7even into the drive 2. it does not ask me anything, write its boot loader to drive 1, lets me choose which OS to boot into each time... perfect. BUT(T):
7even named her own partition C, while drive 1 partitions became D and E. i swapped last two easily, using 7even's disk management utility. that's 1 of 3 and that's not enough. i really want 7even's partition to have the same letter as in vista. i even googled it, and didn't find any answers.
7even is still unconfigured, so it would not be a problem to reinstall it. even more, if it's really necesarry, i can move all of drive 1's data somewhere else, so i can format it.
Today I wanted to intsall Windows 8 in dual boot envirnment with Windows 7 so I created a separate 60gb partition for Windows 8 but after the partition was created, all the previous volumes like Windows 7, HP_Recovry and HP_Tools and the newly created Windows 8 partition are now dynamic plus I can't install Window 8 on that dynamic partition. Below is current situation as shown in disk management in Windows 7: [URL]
I don't want to lose my data including the Windows 7, and HP_Recovry and HP_Tools partitions. clean method to go back to basic disk mode from dynamic mode without losing data. When try to convert from dynamic to basic using easeus utility, it gave me following warning: [URL]
I'm currently running Win XP Pro. on dynamic disks with the system partition mirrored.I have a 20GB simple volume on one of the dynamic disks which I had intended to install a copy of Windows 7 Enterprise on, intending to dual-boot as I changed over from XP to 7, but it appears that you can't install Windows 7 on a dynamic disk as "setup cannot find a location for temporary files." According to Microsoft my only option is to revert the existing dynamic disk/s to basic - losing everything on it including my XP installation.Microsoft says not to mix volumes and partitions on the same disk, but a third party application called Dynamic Disk Converter claims to be able to change simple volumes back to primary partitions - though it isn't clear from the documentation if this can be done to just one volume out of several on a dynamic disk.My options appear to be:
1. Get another hdd for Windows 7.
2. Break the XP mirror and convert one dynamic disk back to basic for Windows 7 - losing my RAID protection
3. Ignore Microsoft's advice and see if Dynamic Disk Converter actually can convert a simple volume back to a primary partition, risking my whole installation.
i was using hp g42 laptop i was delete the hp tools partition.in this situation the total os was crashed and i lose the total data how can iget the data?
View 2 Replies View RelatedLast night as I was attempting to install Windows 8 RP to test it out, I decided I would do a dual boot incase I didn't like it. It downloaded, burned fined and I went to make a new partition, and this is where things went south for me. It converted every disk to dynamic once I had created the new disk to install it on and for the life on me I can't get it to convert back to basic, so I'm pretty well screwed if something goes wrong. Things I've done:
1) Attempt system restore - Ok, so I didn't have a restore point created so this is of no help.
2) I followed this guide found here on SevenForums and attempted all 3 methods - nothing worked Convert a Dynamic Disk to a Basic Disk
3) I downloaed EaseUse Partition master to attempt to change dynamic back to basic, and still a no go.
4) Tried to install Windows 8 again and it would not let me delete the current dynamic disk partitions to start over
5) Tried HP recovery tools to set the computer back to factory condition and it wouldn't work.
Is it possible to delete everything and start over from scratch or will it still be dynamic? At this point, i want a time machine so I can go back before ever attempting to make a dual boot.
How to Convert a Basic Disk to a Dynamic Disk ?
View 0 Replies View RelatedHow to Convert a Dynamic Disk to a Basic Disk ?
View 0 Replies View RelatedI want to setup a Raid 1 mirror from one drive to another using Windows software raid. I know in XP you could not do this on the boot partition (C drive). Is it possible to do this in Windows 7?
View 2 Replies View RelatedI have seen this question being asked a few times already. I just bought 2xSamsung Spinpoint F3 1TB drives and I created a dynamic striped partition with MBR in comuter management. If I try to install win 7, after dvd boot-up, will I be able to select the partition and install windows on it ? I know all about the advantages and disadvantages of using software raid 0. But, my question is simple. Can you just install an O/S on that type of partition (will it be detectable?) or do I have to buy a "fake raid" controller or boot some type of application first to make it detectable everytime I boot up my computer?
View 2 Replies View Relatedmy hard disk converted to dynamic.now it is not booting, it have 300 gb data .i need convert in to basic and working normally.
View 2 Replies View RelatedI have been doing a lot of reading on how to change your IP and to me in windows 7 it is not possible. How to change (Dynamic) IP address in Windows 7 or Vista? How to be able to change there IP? I have tried everything. run/ipconfig /release, unpluging modem and router and no change.
View 9 Replies View RelatedI had some partitions, as follows.
||SYSTEM RESERVED||WINDOWS 7||SHARED DATA||WINDOWS 8||
Next, I shrank the Windows 8 volume and made a new volume. My plan was going to be to clone the Windows 8 volume to the new volume, so I could add more storage space to my shared data partition. The problem is this: creating the extra volume converted my whole HDD to dynamic. That said, my Windows 8 boot was lost immediately. So, I just deleted the Windows 8 partition and the new one and merged all that extra space to my data partition. Now, will this mess with my Windows 7 boot at all? I'm scared to restart my computer. All of my partitions (including my Windows 7 one) are just simple volumes now.