System Partition Letter Change
Jun 2, 2009
The system:
Drive 1: vista boot loader, vista32, two partitions (vista on C, some stuff on D), both NTFS
drive 2: broken grub loader (never mind actually), one ntfs partition with some porn, games, and other usual stuff . named E.
so then, i copy the 7100 x64 distr into my flash drive, boot it, and install our beloved 7even into the drive 2. it does not ask me anything, write its boot loader to drive 1, lets me choose which OS to boot into each time... perfect. BUT(T):
7even named her own partition C, while drive 1 partitions became D and E. i swapped last two easily, using 7even's disk management utility. that's 1 of 3 and that's not enough. i really want 7even's partition to have the same letter as in vista. i even googled it, and didn't find any answers.
7even is still unconfigured, so it would not be a problem to reinstall it. even more, if it's really necesarry, i can move all of drive 1's data somewhere else, so i can format it.
View 9 Replies
ADVERTISEMENT
Nov 16, 2009
I lost my Event Viewer, and had to do a repair installation to fix it. Unfortunately, during the repair install, Windows decided to rename my second HD as the D: drive... it was K: before that. Now I cannot access any of my docs, pictures, music, or videos through the normal means... they don't show up in libraries or explorer, and apps like Restorator and Sure Thing (CD labeler) cannot find them. I think that means the paths are broken..?
It won't allow me to rename the HD back into K: (it's not listed as available). I can access the data by clicking Computer > D, and I can see the data is there, but its unusable as of now. Any ideas?
View 8 Replies
View Related
Apr 10, 2012
I currently have a dual boot on my computer with Windows 7 and XP. Unfortunately as my computer is quite old my hard drive is not very big and with it being partitioned I am fast running out of disk space. So I tried to shrink the XP partition to allow me more disk space for Windows 7. Unfortunatley this would only let me shrink it by 83mb for some reason. I decided that since I barely use XP anymore that I would simply reformat the XP drive then try and merge them together. When I tried to format the partition it just gave the error "Windows was unable to complete the format". I then discovered in Disk Management that the Windows XP partition was the system partition which was causing the problem.
View 4 Replies
View Related
Nov 26, 2009
http://i49.tinypic.com/2w7i9ft.png
I want to be able to safely remove the D: partition in the image linked above. I can tell that I will need to change the Z: partition into the System partition to do so, but I cannot find out how.
View 3 Replies
View Related
Aug 13, 2012
i got only one disk and all of the partitions are dynamic i have low space on the system files partition so i decided to extend the partition i deleted a partition and had an unallocated space but i couldnt extend the the system partition i tried to install windows but it couldnt install on a dynamic disk
View 2 Replies
View Related
May 10, 2009
My C: and a couple of other partitions come up fine, but some are missing.I go into Disk Management to assign a drive letter to these parititions but I get an error."The operation failed to complete because the Disk Management console view is not up to date. Refresh the view using the Refresh Task. If the problem persists close the Disk Management console, then restart Disk Management, or restart the computer."I've tried refreshing and restarting with no luck.I went into Vista and it shows the same thing, unassigned drives and no luck assigning a letter.
View 9 Replies
View Related
Apr 14, 2011
i want to change a HDD drive letter from F to D, this drive has games and apps installed on it, will those still run ok after i change the letters?
FYI the OS is on a seperate drive C
View 6 Replies
View Related
Aug 20, 2010
I had windows 7 on a SSD drive, assigned C: by windows 7, but it was full so I decided I'd clone it onto a bigger SSD drive using Acronis Disk Director. Went swimmingly I thought, both drives contained the same data. I wasn't too sure what my next step ought to be, whether acronis will have sorted it so that my new SSD now has the orginal SSD's drive letter or not. If it did, it will be mean a simple transition. But you guessed it, it left the drive letters the same, so when I booted up, it loaded from the orginal SSD. I then changed the original SSD drive letter, and used EasyBCD to remove the original boot and create a new one with the new SSD. Unfortunate now when I boot up Windows 7 I get a Preparing Your Desktop message for a couple of mins, but it's then followed by a screen with a cursor but no desktop icons or taskbar. It also seemed unresponsive to keyboard strokes.
View 3 Replies
View Related
Nov 4, 2010
I have a triple boot system:
C - Windows 7 Ultimate - SSD array D - Data - WD 640 spinner 1 E - Windows 7 Pro - 1st partition on WD 640 spinner 2 F - Windows 7 Enterprise - 2nd partition WD 640 spinner 2
Using Acronis True Image 2010, I keep 2 images of each OS on D.I'd like to put an image of C onto E, then make some changes to it. I think I tried this back in the Vista beta days, but can't recall if I ever got it to work, tempted to say "no".
View 9 Replies
View Related
Dec 28, 2011
I have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me error saying Setup was unable to create a new system partition or locate an existing system partition.
View 9 Replies
View Related
Jan 21, 2013
The title might be a bit weird, but i wasn't sure how to phrase it. I'll try and describe our problem:Basically what we want to do is to use the windows 7 search function, without knowing what letter our USB device has been given (i.e. D:, F: etc). Say I've named my storage device "Hello", now i'd like to search for "Hello" and the content should be popping up (like when i write D: and i see all the content in D: without going there manually). Is this possible, or are we simply wasting our time?
View 3 Replies
View Related
Feb 28, 2011
How to Fix Missing Vista Hard Disk Partition Letter in Windows 7 ?
View 0 Replies
View Related
Jan 17, 2009
Dual Boot Windows 7 x64 beta
XP x32
After installing Windows 7 into a new partition, the OS started up fine from the new dual boot screen, but I didn't have access to my Win XP partition from within explorer. In disk management, I was able to add a letter to my WinXP volume (I took the next available "O") and it popped up in explorer no problem. However, after restarting, Win 7 begins to load, then BSODs way too fast to think about catching with camera.
I got the option to run startup repair at the restart, and I did so. The conclusion there was that I had plugged in a device during the last session that was now causing problems. That is bogus, unless that device is my newly lettered partition. I read many a thread in here about re-lettering a partition that had lost its letter in the install (usually the other OS volume in a dual-boot environment), but didn't see those posters then have issues upon restart.
I can boot into XP, although here now NONE of my drives have letters.
Any Help? I really was diggin' my Windows 7 time, and really enjoyed taking advantage of all my RAM and x64 versions of CS4 and CAD.
View 3 Replies
View Related
Sep 24, 2012
I want to change the drive letter of the drive on which Windows 7 is installed.It is currently F:, and I want to change it to K:It is not possible from the Disk Management as I tried.
View 2 Replies
View Related
Dec 27, 2009
My Floppy Drive has the drive letter assignment (A). I would rather have it be (F). The traditional way to change drive letters is under disk management on right-click of My Computer. However, Floppy drives are not visible in the list. How can I change the letter?
View 1 Replies
View Related
Oct 19, 2012
I am running Windows Ultimate 32 bit. I have 2 SATA Hard Drives (one with OS), 2 SATA DVD and Blu-Ray Drives and 1 IDE Hard Drive which is configured as a slave.Second - I needed to do some hard drive trouble shooting for another computer that had a (possibly) dead IDE Hard Drive. To do this I shut down my computer, and attached the (supposedly) dead IDE Hard Drive in its place.Now - all the trouble began.After booting into the Bios, I noticed the supposedly dead hard drive did not register even though it was spinning. I kept booting into the OS to see if it would be recognized in any case - it was not.I put my working IDE Hard Drive back in - after shutting down and removing the dead IDE Hard Drive.I booted back into the BIOS and noticed my good IDE Hard Drive wasn't being recognized either. I then went into advanced Bios settings and walla - it saw my hard drive but said I needed to reboot.After rebooting I noticed the same thing with the Bios, but this time proceeded to boot into the OS.After signing on, I noticed my Good Hard Drive was no longer recognized in Explorer. I went into Administrator and Computer Management and then into Disk Management.
View 2 Replies
View Related
Dec 28, 2012
I have built a computer for video editing and named the hard drives (C for the main drive, (M for the drive holding my music, (P for the drive for photos, and I named the drive to store my videos (V. However when I tried to write path to the V: drive I was told V: is an invalid path, I suppose because of the confusion with a followed by a / which would give you a / which can be confused with V but is not exactly the same. I went to My Computer and right clicked on the V: drive and clicked on "rename" in the drop down menu and changed the name to "Storage" but the (V persisted. Then I renamed again and named the drive "Storage (S" and now in "My Computer" the drive is shown as "Storage (S (V" When writing a path to put videos on this drive can I use either S:/ or V:/ to get videos into this drive? Is there some way to remove the (V
View 2 Replies
View Related
Oct 14, 2009
Had an XP dual boot with Windows 7 RTM. Deleted XP C: drive and moved RTM D: drive over into it's space. I would like to keep and license this installation using retail Windows 7 Ultimate Signature Edition received with party pack.
Is there a way to change the Windows 7 D: drive to C: by running a repair install (upgrade over OS) as I would like to find a way to do this without having to do a clean install.
View 4 Replies
View Related
Oct 18, 2009
In 7 everything is all right.7 is c: and the boot partition is hidden.
But in XP the hidden partition is c: and visible.XP is d:,so some programs use default dir can't work.I tried disk management to change xp to c: but didn't succeed.
Anyway to change the drive letters and hide the 100m partition?
View 9 Replies
View Related
Jun 13, 2012
I have an OCZ vertex 3 as my boot drive and a 2TB Hitachi drive as my storage drive. When I installed the system, I changed the 2TB drive letter name to G. Recently, I installed a card reader into my system, which somehow made one of the card slots G and the 2TB D. Now I can't run any of my programs installed on the mechanical drive. I can't even open diskpart
View 4 Replies
View Related
Aug 13, 2012
I have a copy of windows 7 from a friend. (USB, possibly enterprise)It runs well, is official and can be re installed and is verified through the Microsoft site, so the media doesn't seem to be a problem.I was able to install Win7 Ult x64 on my WinVista HomePrem x86, but I went back through to clean the hard drive (it was full, I didn't format before) and after low level formatting I cannot reinstall the OS. The harddrives are completely empty, and I get stuck at "Setup was unable to create a new system partition or locate an existing system partition," after hitting next when you are selecting the HD partition to install on. I tried a couple of things already:
-Installing on another harddrive
-Formatting using Hiren's bootcd
-Using a hard drive with XP installed to see if it is an upgrade and not a full version (no luck, still wouldn't install)
-diskpart > list disk > select disk 0 > list partition > active \ in cmd..I have three hard drives attached to the computer right now, they can't all be broken. T.T
View 4 Replies
View Related
Nov 4, 2012
Ok so here's a little backstory before I jump into my problem. I've got 2 harddrives installed; a SSD and a regular HDD. The SSD is labeled C: since it has Windows and other core programs while the HDD is labeled B:. The solid state is almost full while the regular one still has over a terabyte of space left to fill up. Normally, I have no problem installing new programs or games to the HDD till now.When I went to install my new game on B: it kept giving me invalid directory errors. So I went to the game's forums and discovered that the reason that issue was happening was because the game recognized drive letters A and B as floppy drives as opposed to hard drive letters. Further investigation revealed that apparently this little bit of design is hardcoded into the game and there really isn't any work around except changing the drive letter. So I looked up how to do so and made the change.....then the problems started.After changing the drive letter from B: to Z: I kept getting 'path does not exist' error message with features and hardware connected to Windows on C:.
For example, my DVD-ROM drive is labeled D: and everytime I tried to install the game after the drive letter change I got 'D:\, path does not exist. make sure the path is correct and try again' error. Another example, when trying to go to Device Manager to start a fix I couldn't because of 'explorer.exe, path does not exist' error. Basically, every step I tried where anything was connected to C: or D: I got the 'path does not exist' error. At this point I've done a system restore to before the drive letter changed and I'm running as I was before trying to install the game.My question is, how do I change the driver letter of my HDD without getting all the 'path does not exist' errors? If that's not possible, how do I fix the 'path does not exist errors' when the path starts with C: or D:? Is it done the same way I would with a program through the properties tab in the target path section and start in section? Or is there something more invasive I need to do when the path issue starts with C: and D:
View 7 Replies
View Related
Nov 3, 2011
I recently set up a new Systemax SYX-1113 PC with a SSD (C:) for Win 7 Pro and a 1TB HDD (G:) for my user libraries and programs. I need to upgrade the HDD from a 1GB to a 2 GB drive so I cloned the 1TB (G:) drive to a new 2TB (H:) drive. My new challenge is figuring out how to switch the drive letters on the two HDDs so that Windows looks to the new drive for the user directories and program files. I tried using disk manager in Windows 7 and got the BSOD - I guess it didn't like me changing the location of the active user profile. I assume I need to boot the PC from something other than the C: drive to make the change.
View 5 Replies
View Related
Dec 5, 2009
Windows 7, 32 bit, 12 partitions on 3 hdd's, Windows 7 on C:
When migrating to Windows 7 I first tried to update my Vista which I had used happily for 2 years. Installation went fine, but there were too many problems after.
So I bought a new 1 GB hdd and installed Windows 7 there from scratch. It is on a partition with drive letter C. I copied most of my old partitions to the new hdd, went fine.
When trying to delete one of the old hdd's with EASEUS Partition Master Home 4.1.1 manager software, there is one partition on it (which once before was called C, then successfully renamed to Z ) which I can't delete. I has on it the following folders:
$RECYCLE.BIN
Boot
System Volume Information (locked)
-->and files:
BOOTSECT.BAK
bootmgr
They are only 30,5 MB in size. So I resized the partition to 1 GB.
EASEUS characterizes it as Status = System, Pri/Log = Primary. Windows Disc manager characterizes it as System, Active, Primary Partition.
My question is: Can I change the drive letter from Z to B without risking the whole system to be unbootable? (and maybe never be bootable again?) When trying I just get the usual Windows warning.
I would be most grateful for an answer explaning what and why or why not.
View 9 Replies
View Related
Oct 17, 2012
So I can't change the drive letter. Do I need to use Partition Magic again? The more I keep hearing/reading "do you have a backup?" - makes me believe the tool (OS) isn't capable of handling/accessing the data properly.
View 8 Replies
View Related
Jun 7, 2012
Recently my SSD failed so I tried installing windows 7 from DVD on my HDD but I always get an error message: "Setup was unable to create a new system partition or locate an existing system partition."I've tried everything I could find here: I gave boot priority to the HDD, I unplugged every other device but nothing seems to work.
View 4 Replies
View Related
Jun 28, 2012
Through a series of shenanigans involving experiments with mirroring on Windows 7 64 bit using Disk Management, and then subsequently removing the mirror after having recurring errors/problems with the synching, My 100MB System Reserve partition has ended up on a separate partition than my system image. For instance: Disk 1 System C: Healthy (Boot, page...) Disk 0 Healthy (System Reserved...).
In addition, the System Reserved partition has been assigned a drive letter "G:" or "E:" and is now visible in explorer and it won't allow me to remove it and supress from explorer view.
I'd like to
1) move/create the System Reserve partition to Disk 1 (with System C: drive)
2) remove the System Reserve partition from Disk 0 to free it all up as a data drive
Do I use command below to create a System Reserve on Disk 1? bcdboot C:Windows How do I then delete the System Reserve partition on Disk 0. Also a byproduct of all of this, when I reboot now, I have a "Windows 7" option and a "Windows 7 Secondary Plex" option. The "Windows 7" option no longer boots (it's stops while the logo panes are flying in circles to form the logo and goes into a fix loop that never fixes it). I have a feeling it's looking for the old mirrored hardware configuration or something. However, "Window 7 Secondary Plex" option does boot just fine. Do I use MSCONFIG to remove the "Windows 7" boot entry so I don't get this annoying option at boot?
View 9 Replies
View Related
Aug 21, 2012
I have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
View 2 Replies
View Related
Dec 18, 2012
I have Windows 7 ultimate 64-bit installed on DELL desktop (Optiplex 990) i7 Core. I have two HDD: Disk 0 contains the operating system 500GB. and Disk 1 empty 1TB.
I want to make a partition on disk 1 to mirror the operating system partition and keep the remaining for data storage. I tried to do but I had the following error message: "All disks holding extents for a given volume must have the same sector size, and the sector size must be valid."
I tried to attach a screen shot but couldn't.
View 5 Replies
View Related
Jul 24, 2011
I wanted to resize a partition, so I backuped all important files and booted from a vista PE CD. The program used is called "Easeus". After the resizing a message appeared, which told me that the system information couldnt be updated. After a restart, it - well, it didnt restarted. I tryed to format my C:Windows partition, but Easus decided to randomly format my linux partitin, too. Yey. After that i just formated everything, so i can create one big partition so this never happens again :P. To put it in a nutshel, there is no way to boot besides from booting from a cd. The diagnostic tool of the fabricator is giving me the "error code: BIOHD-3 No bootable drives detected" message.I tried to fix it with a win7 repair disk (just realized, that the disk is for 64bit, i have a 32 bit os - i think it doesnt matter, because there isnt any os installed at all). I used pretty much every "bootrec" command, sucessful, but no change. The startup repair gave this message: "the partition table does not have a valid system partition" diskpart - act isnt helping either: "The specified partition type is not valid for this operation."I dont know if i could install any os from a disk - i dont have a bootable installation cd/dvd. Because of that i would be happy if someone can tell me where i can find a free os and how i install it. From a os i can install my win 7.
View 1 Replies
View Related
Oct 22, 2009
I have started the installation process of windows 7 on a clean 1 TB hard drive. In order to ensure expediency of the read time of my primary drive, I choose the custom installation. When I did I partioned the drive as 250GB & 700GB. Hoever it also created a 100MB system partition on its own. It never did this in Vista. Is it suppose to do that?
View 2 Replies
View Related
