'Path Does Not Exist' Error Constantly After Drive Letter Change?
Nov 4, 2012
Ok so here's a little backstory before I jump into my problem. I've got 2 harddrives installed; a SSD and a regular HDD. The SSD is labeled C: since it has Windows and other core programs while the HDD is labeled B:. The solid state is almost full while the regular one still has over a terabyte of space left to fill up. Normally, I have no problem installing new programs or games to the HDD till now.When I went to install my new game on B: it kept giving me invalid directory errors. So I went to the game's forums and discovered that the reason that issue was happening was because the game recognized drive letters A and B as floppy drives as opposed to hard drive letters. Further investigation revealed that apparently this little bit of design is hardcoded into the game and there really isn't any work around except changing the drive letter. So I looked up how to do so and made the change.....then the problems started.After changing the drive letter from B: to Z: I kept getting 'path does not exist' error message with features and hardware connected to Windows on C:.
For example, my DVD-ROM drive is labeled D: and everytime I tried to install the game after the drive letter change I got 'D:\, path does not exist. make sure the path is correct and try again' error. Another example, when trying to go to Device Manager to start a fix I couldn't because of 'explorer.exe, path does not exist' error. Basically, every step I tried where anything was connected to C: or D: I got the 'path does not exist' error. At this point I've done a system restore to before the drive letter changed and I'm running as I was before trying to install the game.My question is, how do I change the driver letter of my HDD without getting all the 'path does not exist' errors? If that's not possible, how do I fix the 'path does not exist errors' when the path starts with C: or D:? Is it done the same way I would with a program through the properties tab in the target path section and start in section? Or is there something more invasive I need to do when the path issue starts with C: and D:
On an Asus p8z77-v mobo I can set each individual sata port as removeable or not. I am in AHCI mode. My rig has a dock for an ssd drive that I will use as a backup image. when I initialize the ssd It asks "If" I would like to assign a path and drive letter. If I assign X or Z is win 7 gonna have hissy fits if that drive is not present at boot or if I put a different ssd in that dock ?
I lost my Event Viewer, and had to do a repair installation to fix it. Unfortunately, during the repair install, Windows decided to rename my second HD as the D: drive... it was K: before that. Now I cannot access any of my docs, pictures, music, or videos through the normal means... they don't show up in libraries or explorer, and apps like Restorator and Sure Thing (CD labeler) cannot find them. I think that means the paths are broken..?
It won't allow me to rename the HD back into K: (it's not listed as available). I can access the data by clicking Computer > D, and I can see the data is there, but its unusable as of now. Any ideas?
I am getting this error when I am trying to open device manager, right click oncomputer manager and I get this error the specified path does not exist check the path and then try again
I have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
I had windows 7 on a SSD drive, assigned C: by windows 7, but it was full so I decided I'd clone it onto a bigger SSD drive using Acronis Disk Director. Went swimmingly I thought, both drives contained the same data. I wasn't too sure what my next step ought to be, whether acronis will have sorted it so that my new SSD now has the orginal SSD's drive letter or not. If it did, it will be mean a simple transition. But you guessed it, it left the drive letters the same, so when I booted up, it loaded from the orginal SSD. I then changed the original SSD drive letter, and used EasyBCD to remove the original boot and create a new one with the new SSD. Unfortunate now when I boot up Windows 7 I get a Preparing Your Desktop message for a couple of mins, but it's then followed by a screen with a cursor but no desktop icons or taskbar. It also seemed unresponsive to keyboard strokes.
C - Windows 7 Ultimate - SSD array D - Data - WD 640 spinner 1 E - Windows 7 Pro - 1st partition on WD 640 spinner 2 F - Windows 7 Enterprise - 2nd partition WD 640 spinner 2
Using Acronis True Image 2010, I keep 2 images of each OS on D.I'd like to put an image of C onto E, then make some changes to it. I think I tried this back in the Vista beta days, but can't recall if I ever got it to work, tempted to say "no".
After installing Windows 7 into a new partition, the OS started up fine from the new dual boot screen, but I didn't have access to my Win XP partition from within explorer. In disk management, I was able to add a letter to my WinXP volume (I took the next available "O") and it popped up in explorer no problem. However, after restarting, Win 7 begins to load, then BSODs way too fast to think about catching with camera.
I got the option to run startup repair at the restart, and I did so. The conclusion there was that I had plugged in a device during the last session that was now causing problems. That is bogus, unless that device is my newly lettered partition. I read many a thread in here about re-lettering a partition that had lost its letter in the install (usually the other OS volume in a dual-boot environment), but didn't see those posters then have issues upon restart.
I can boot into XP, although here now NONE of my drives have letters.
Any Help? I really was diggin' my Windows 7 time, and really enjoyed taking advantage of all my RAM and x64 versions of CS4 and CAD.
I want to change the drive letter of the drive on which Windows 7 is installed.It is currently F:, and I want to change it to K:It is not possible from the Disk Management as I tried.
My Floppy Drive has the drive letter assignment (A). I would rather have it be (F). The traditional way to change drive letters is under disk management on right-click of My Computer. However, Floppy drives are not visible in the list. How can I change the letter?
I have built a computer for video editing and named the hard drives (C for the main drive, (M for the drive holding my music, (P for the drive for photos, and I named the drive to store my videos (V. However when I tried to write path to the V: drive I was told V: is an invalid path, I suppose because of the confusion with a followed by a / which would give you a / which can be confused with V but is not exactly the same. I went to My Computer and right clicked on the V: drive and clicked on "rename" in the drop down menu and changed the name to "Storage" but the (V persisted. Then I renamed again and named the drive "Storage (S" and now in "My Computer" the drive is shown as "Storage (S (V" When writing a path to put videos on this drive can I use either S:/ or V:/ to get videos into this drive? Is there some way to remove the (V
Had an XP dual boot with Windows 7 RTM. Deleted XP C: drive and moved RTM D: drive over into it's space. I would like to keep and license this installation using retail Windows 7 Ultimate Signature Edition received with party pack.
Is there a way to change the Windows 7 D: drive to C: by running a repair install (upgrade over OS) as I would like to find a way to do this without having to do a clean install.
In 7 everything is all right.7 is c: and the boot partition is hidden.
But in XP the hidden partition is c: and visible.XP is d:,so some programs use default dir can't work.I tried disk management to change xp to c: but didn't succeed.
Anyway to change the drive letters and hide the 100m partition?
I deleted my existing OS then created two new partitions on the same drive. Then I installed Vista on one partition and that partition was properly named "c" as ususal. Then I started Windows 7 setup.exe from a different hard drive and let Windows 7 install itself into its own partition. When I got to "My Computer" the Windows 7 partition was labelled as "I" instead of the expected "C" which had never happend before when I did the same thing.
Does anyone know a save way to label the Win 7 drive as "C" while in Windows 7?
I'm sure this has come up before but I'm after more detail. I have a new PC. My 'C' drive is a SSD.A second 2 TB HDD was assigned 'E'.I will choose, where possible to load apps onto 'E' because of the size, restrictions of the SSD. So far I've been hold back but have installed MS Office 2010 on 'E' and the Canon software for a Pixma multi-function.I have now installed 3 more, 1 TB HDDs (from older PCs) and one of these is 'D'.I'd like to change the 2 TB drive to 'D' and change the existing 'D' to 'E'.Microsoft issue a warning that some windows apps will have problems if a drive letter is changed but don't specify any.If I do change the letters, will this cause problems with the path to the Office suite? If problems do arise, does reverting to the original lettering resolve things - or is the registry well and truly screwed by then? Would getting a registry backup done and having it on the desktop be of any use?
I recently set up a new Systemax SYX-1113 PC with a SSD (C:) for Win 7 Pro and a 1TB HDD (G:) for my user libraries and programs. I need to upgrade the HDD from a 1GB to a 2 GB drive so I cloned the 1TB (G:) drive to a new 2TB (H:) drive. My new challenge is figuring out how to switch the drive letters on the two HDDs so that Windows looks to the new drive for the user directories and program files. I tried using disk manager in Windows 7 and got the BSOD - I guess it didn't like me changing the location of the active user profile. I assume I need to boot the PC from something other than the C: drive to make the change.
Windows 7, 32 bit, 12 partitions on 3 hdd's, Windows 7 on C:
When migrating to Windows 7 I first tried to update my Vista which I had used happily for 2 years. Installation went fine, but there were too many problems after.
So I bought a new 1 GB hdd and installed Windows 7 there from scratch. It is on a partition with drive letter C. I copied most of my old partitions to the new hdd, went fine.
When trying to delete one of the old hdd's with EASEUS Partition Master Home 4.1.1 manager software, there is one partition on it (which once before was called C, then successfully renamed to Z ) which I can't delete. I has on it the following folders:
$RECYCLE.BIN
Boot
System Volume Information (locked)
-->and files:
BOOTSECT.BAK
bootmgr
They are only 30,5 MB in size. So I resized the partition to 1 GB.
EASEUS characterizes it as Status = System, Pri/Log = Primary. Windows Disc manager characterizes it as System, Active, Primary Partition.
My question is: Can I change the drive letter from Z to B without risking the whole system to be unbootable? (and maybe never be bootable again?) When trying I just get the usual Windows warning. I would be most grateful for an answer explaning what and why or why not.
So I can't change the drive letter. Do I need to use Partition Magic again? The more I keep hearing/reading "do you have a backup?" - makes me believe the tool (OS) isn't capable of handling/accessing the data properly.
Drive 1: vista boot loader, vista32, two partitions (vista on C, some stuff on D), both NTFS
drive 2: broken grub loader (never mind actually), one ntfs partition with some porn, games, and other usual stuff . named E.
so then, i copy the 7100 x64 distr into my flash drive, boot it, and install our beloved 7even into the drive 2. it does not ask me anything, write its boot loader to drive 1, lets me choose which OS to boot into each time... perfect. BUT(T):
7even named her own partition C, while drive 1 partitions became D and E. i swapped last two easily, using 7even's disk management utility. that's 1 of 3 and that's not enough. i really want 7even's partition to have the same letter as in vista. i even googled it, and didn't find any answers.
7even is still unconfigured, so it would not be a problem to reinstall it. even more, if it's really necesarry, i can move all of drive 1's data somewhere else, so i can format it.
I have an OCZ vertex 3 as my boot drive and a 2TB Hitachi drive as my storage drive. When I installed the system, I changed the 2TB drive letter name to G. Recently, I installed a card reader into my system, which somehow made one of the card slots G and the 2TB D. Now I can't run any of my programs installed on the mechanical drive. I can't even open diskpart
Is there any way I can change the default install path for programs away from my system drive? It's getting kind of annoying having to change it manually every single time I install something.
TrendMicro Titanium Maximum Security 3 user( Tried their on line chat dropped 3 times different days, Agh )Wants to install directly to SSD C: drive,want to install on 1TB HD ( Partioned to D: E: F want on D: with all other programs.Does not offer an option to install anywhere, just default install on SSD,
I just built a new computer which includes a SSD and Hard Drive. I plan to use my SSD for only Windows 7 and my Games. I plan to install all other applications on my hard drive therefore I am trying to change the default software installation path from C:ProgramFiles to E:ProgramFiles. I have been following Microsoft's tutorial that says to change the key found in HKEY_LOCAL_MACHINE SOFTWARE Microsoft Windows CurrentVersion but that did not work as I am still getting the original installation path.
I guess Toshiba comes with a back up on hard drive but I seen have two recovery patrons. One is from Toshiba one from recovery CDs when last I recovered. So if reinstall must I do oem clean install or should I just recover to ordinal do I delete old recovers? I don't want break it. Laptop windows 7 is there anyway recover windows files with out deleting anything ? Or can you create new Partion install clean windows on there transfer files then delete current Partion then resize new. So you have two windows at same time. Is bad not format I mean can I install Linux change mind or is installing on HD a serious issue.such as don't over do it. I'm texting from phone sorry I'd errors this odd.I want learn more about windows and Linux want make sure its not going mess up computer to toy with operating systems maybe make a bunch for fun.
I used the windows defraggler but it shows me a drive that doesn't exist.i have only C,D E and F which is DVD drive. But while I try to defragment it shows me a drive like:
\?Volume{66ff1bc3-b24e-11df-9755-806e6f6e6963}.
I would like to know where this drive is located. When I click on my computer it shows only drives C,D,E.
I have Win 7 home premium on an HP laptop with 4 usb ports. I have 2 Western Digital Elements 1.5 TB drives for backups. If I plug in one of the drives, Win assigns a drive letter, but if I add the second one it doesn't.
To troubleshoot, I've plugged each drive into every usb port on the laptop, and each port reads each drive alone, but if I plug in the second drive while the first is still in, it shoes up in devices but does not get a drive letter. I tried assigning a different drive letter to the device plugged in first, but Win still doesn't assign a letter to the second drive.
I have network sharing issues and I believe the problem is that I cannot turn on file/printer sharing. When I click the button under advance sharing settings for file/printer and hit save (as an admin) it just goes back to off. Under Services, the Server option which is on automatic does not start. When I try to start it, it says:Windows could not start the Server service on Local Computer. Error 1075: The dependency service does not exist or has been marked for deletion.
today I backed up my files when prompted by the little flag icon, they went on an external HDD. Updated everything. Went back to pc after tea, and when i switch on it can't boot windows.
1.. it asks me to put the cd in, when i do it goes through to the option to upgrade, repair or custom. If i try to custom install it tells me no drives were found.
2It won't let me upgrade either.So i put the disc for the motherboard etc in and ask it to repair it says IDE drive doesn't exist or ALL primary partitions are occupied
