Error 1075: The Dependency Service Does Not Exist Or Has Been Marked For Deletion
Sep 11, 2010
I have network sharing issues and I believe the problem is that I cannot turn on file/printer sharing. When I click the button under advance sharing settings for file/printer and hit save (as an admin) it just goes back to off. Under Services, the Server option which is on automatic does not start. When I try to start it, it says:Windows could not start the Server service on Local Computer. Error 1075: The dependency service does not exist or has been marked for deletion.
View 5 Replies
ADVERTISEMENT
Jul 13, 2012
On July 12th 2012, my computer installed updates. After rebooting and waiting for me on the login screen, I gave it a hard shutdown to check on the BIOS settings (for a little side project, in the end I did not save any changes). After booting and logging in again, I find that many services are not running. I ran a very thorough check for malware and viruses (took over 24 hours to complete), and still no solutions. I have uninstalled/reinstalled my Broadcom 802.11g Wireless Driver several times.
I now look in the Event Viewer and find that the DHCP Client service is not running! It is set to automatic start in Services.msc, but when I try to manually start it, it gives me error 1075 (some dependencies do not exist or are marked for deletion). Running ipconfig, I notice that my system is using an APIPA-formatted address (169.254.x.x), indicating that the computer couldn't find a DHCP server.
My Event Viewer is peppered with:
Event 7003, Service Control Manager
The DHCP Client service depends the following service: Afd. This service might not be installed.
Event 7001, Service Control Manager
The WinHTTP Web Proxy Auto-Discovery Service service depends on the DHCP CLient service which failed to start because of the following error: The dependcy service does not exist or has been marekd for deletion.
And that keeps repeating many times in a minute (about 30-40 cycles of it).
View 6 Replies
View Related
Dec 12, 2011
I have a serious problem on a work laptop. I have some sort of malware.I believe I got it from downloading pdf files but I'm not sure.The symptoms are I am getting a lot of disk type errors. Also, my desktopicons are mostly gone. Also there were a bunch of windows popping up.My Desktop walpaper is now black rather than the default. Now, after running ComboFix, everything I try to run says Illegal Operationattempted on a registry key that has been marked for deletion
View 2 Replies
View Related
Jan 12, 2013
I finally got a new laptop after almost a year of struggling with my old one. I've had experience with using homegroup in the past and was thinking maybe I could access some of my files on my old laptop through that so I don't have to go through the trouble of manually transferring everything via flash drive and what not. I seem to be running into a problem though, my old laptop seems to be in its own homegroup I guess. Whenever I try to leave it, it says "windows cannot remove the computer from the homegroup".
I researched the problem, and used the troubleshooter which said that the homegroup provider service wasn't started and it couldn't be fixed automatically. I tried restarting starting the service but got that error 1608 thing. To bypass this I've tried joining whichever group my old laptop is in, but it can't seem to be found even though the two are both on the same wifi/network. If it matters, the new laptop is windows 8 and the one I'm having trouble with is windows 7.
View 5 Replies
View Related
Sep 5, 2011
I have the problem that the service WLAN Auto-Config isn't started. When I try to start the service manual then the error 1068 appear: "Error 1068: The dependency service or group failed to start." I have tried the three steps of onopko, but this is not working to my computer. On advice of StalkeR I have add the reg files of Black Viper site as Safe as well default. Every time I have restarted my computer after adding the reg files, but both files are resolving me problem.
View 1 Replies
View Related
Aug 15, 2012
I'm having a pretty big problem on my laptop- I can't connect to the internet and when I try to connect in the network and sharing centre it simply says 'The dependency service or group failed to start' and I am unable to connect to the internet (Using wi-fi). There's a lot more to it than that though. Simply put, here is a list of the problems I am facing:
1. Can't connect to the Internet
2. Cannot change theme, stuck in basic (Themes are grey and do not respond when I click on them in the control panel)
3. Overall brightness of laptop screen has decreased.
4. When opening my anti-virus software (avast) it says that the software is off and I should click the fix now button to turn it on. However, when I click on it nothing happens.
Please note that this problem occurred when I was messing around with command prompt ( I booted windows 7, pressed F8 and tried to check weather I could launch a USB program through safe mode- command prompt). I figured out I had no idea what the commands were and tried using one of the few commands I knew- ms config. I may have changed settings there and this could be how it happened, I'm not really sure. I'm not very experienced with command prompt but have full knowledge of control panel options, computer, etc.
View 9 Replies
View Related
Jul 8, 2011
solving Error #1075 problem in conjunction with CheckPoint VPN NGX R60 HFA3. I am using a Dell E6510 laptop computer running Windows 7 Ultimate 32-bit OS. I can get this VPN to run and connect when I use Microsoft's XP virtual machine sitting on the Windows 7 desktop but I cannot get it to run on the Windows 7 desktop by itself.Although the VPN seems to load without incident the associated icon "key" does not appear in the notification tray at the lower right. It does appear in the XP virtual machine and on a separate HP desk top running Vista.When I type services.msc at the Win 7 command prompt I get a list of all the loaded services including the CheckPoint VPN. It is at this point when I try to start the VPN I get the 1075 error. When I check the dependencies under the VPN I find the "CheckPoint Office Mode Module" and the "VPN-1 Module".How do I determine if these dependencies are causing the 1075 error message? What steps do I need to take to resolve the error message so the VPN will start?
View 1 Replies
View Related
Feb 24, 2011
In the tray at the bottom right of the screen where the wireless signal strength indicator thingy sits I now have a blue circle. Sometimes I get an orange star where there used to be a white histogram.The computer still connects to the Internet but if I right click on the icon the icon will change to a plug and a red cross.If I open Network and Sharing Centre I see the message in the title to this post.As I type I now have "Not connected - Connections are available" in a box above the tray but I AM still connected.
View 2 Replies
View Related
Nov 2, 2011
Last week I hit an issue whereby I was unable to access the Internet wirelessly even though my laptop could see the router and had a good signal. I tried connecting up via an ethernet cable to no avail.
The issue seems to have started right after a Windows Update but I can't be 100% certain. If I do ipconfig /all I can see that DHCP is not enabled. I know the router is fine because my vista laptop can access wirelessly via the router fine. I tried doing some things I seen in the forum such as ipconfig /renew etc. but it said it couldn't contact the RPC server. I followed this up and was recommended to check the DHCP client service was started. It isn't even there. I was wondering if the update could have removed it.
Someone else who had reported the same issue on this forum was asked to do a system restore. I did this and the service is still not there. I am assuming that the non-existence of the DHCP client is the cause of my issues accessing the Internet.
View 1 Replies
View Related
Jan 8, 2012
I have a bit of a problem on my hands. I'm using Microsoft Visual Studio 2010, and every time I try and compile and run the code that I wrote, MVS complains about not being able to write over the .exe file. This has been documented before, and there are fixes, but everything I've tried simply doesn't work.The primary fix is enabling the "Application Experience" service, but the problem is that for some reason that service isn't even listed among the others. I've tried to use that "regsvcr32" thing with the corresponding .dll, but that doesn't work either (it just keeps throwing these error messages in my face)
View 3 Replies
View Related
Jun 6, 2012
I booted up my Win 7 (32 bit) PC this morning and noticed that it was not connecting to my wireless network. I went to check the network settings in device manager and I got the message "The specified service does not exist as an installed service". I can see the file devmgmt.msc in the C:WindowsSystem32 folder, but when I run it from there I get the same message "The specified service does not exist as an installed service". I am also seeing this same message when I insert my Windows 7 CD and try and re-run the setup. Even if I try to run anything as an administrator, I get this message "The specified service does not exist as an installed service". Is this some sort of Malware? Is there any way of recovering from this?
View 9 Replies
View Related
Apr 20, 2011
I was trying to remove some malware "Win 7 Home Security 2011 - Unregistered Version" and I noticed that I cannot turn on Windows Security Center Service. When I click "Turn on Now" button I get an error box "The Windows Security Center service can't be started." I am running McAfee & Malwarebytes. When I execute "sc qc wscsvc" from the command prompt I get "The specified service does not exist as an installed service" .OpenService Failed 1060. Can I reinstall Windows Security Center?
View 2 Replies
View Related
Nov 1, 2010
because I can�t run anyone applicationOnce time that I try to run any application, the system become in slow performance and few minutes later appear the fallowing dialog box:"Can not start the dependency service or group"This occur with all kind of application that I try to run, installer, program, tool, anyone.
View 5 Replies
View Related
Jul 9, 2012
I had used ubuntu earlier for some time and had observed several errors during installation of even a very simple package. Now when I use windows I observed that not even a single installation go unfinished. Do windows packages not need any dependency..or do they have all their dependency pre-stored in their computer?
View 1 Replies
View Related
Nov 4, 2012
Ok so here's a little backstory before I jump into my problem. I've got 2 harddrives installed; a SSD and a regular HDD. The SSD is labeled C: since it has Windows and other core programs while the HDD is labeled B:. The solid state is almost full while the regular one still has over a terabyte of space left to fill up. Normally, I have no problem installing new programs or games to the HDD till now.When I went to install my new game on B: it kept giving me invalid directory errors. So I went to the game's forums and discovered that the reason that issue was happening was because the game recognized drive letters A and B as floppy drives as opposed to hard drive letters. Further investigation revealed that apparently this little bit of design is hardcoded into the game and there really isn't any work around except changing the drive letter. So I looked up how to do so and made the change.....then the problems started.After changing the drive letter from B: to Z: I kept getting 'path does not exist' error message with features and hardware connected to Windows on C:.
For example, my DVD-ROM drive is labeled D: and everytime I tried to install the game after the drive letter change I got 'D:\, path does not exist. make sure the path is correct and try again' error. Another example, when trying to go to Device Manager to start a fix I couldn't because of 'explorer.exe, path does not exist' error. Basically, every step I tried where anything was connected to C: or D: I got the 'path does not exist' error. At this point I've done a system restore to before the drive letter changed and I'm running as I was before trying to install the game.My question is, how do I change the driver letter of my HDD without getting all the 'path does not exist' errors? If that's not possible, how do I fix the 'path does not exist errors' when the path starts with C: or D:? Is it done the same way I would with a program through the properties tab in the target path section and start in section? Or is there something more invasive I need to do when the path issue starts with C: and D:
View 7 Replies
View Related
Dec 21, 2011
I am having difficulty with drivers on my Acer Aspire 5253 system using Win 7. It is a couple months old. Within the last month, I have been getting random blue screen of death error messages in which the computer shuts down to prevent damage. The computer boots up fine without any problems. The blue screen that I see contains the same information each time.
View 14 Replies
View Related
Sep 25, 2012
I am getting the folllowing message and tried everything but nothing worked: Windows could not start the Check Point SSL Network Extender service on Local Computer. Error 1068: The dependancy service or group failed ton start
View 1 Replies
View Related
Jan 26, 2013
I am getting this error when I am trying to open device manager, right click oncomputer manager and I get this error the specified path does not exist check the path and then try again
View 6 Replies
View Related
Apr 4, 2011
I downloaded 2 videos from a camcorder and the went into a shotcut folder and I can't open them without getting a message saying that the link cannot be opened. The folder shows on the desktop?
View 2 Replies
View Related
Jan 12, 2013
so i reinstall my os and backed up all of my c drive and an additional hdd when i restored them on the new hdd i try to delete the old c folder and it says i dont have permission but im the only user on this computer and it will not allow me to delete this folder at all i tried to go in and allow myself full access but yet can not delete this folder can anyone give me some insight on this and a way to get rid of this restored c
View 17 Replies
View Related
Jan 26, 2011
i not using english OS at the time, so i directly translated the message, but the actuall mesage is:The selected volume is on a dynamic disk when i select the location to save.hi, I so just reinstalled my os a few days ago, and today, i finally finish installing all the basic programs, so i opened up windows back up and select my data drive to backup on (D: ) but under it, theres that yellow triangle notification saying that the selected partition is on a active drive.for my understanding, active drive is only suppose to be my C: drive, so i opened up diskmanagement to check, and C: drive is actually inactive, but it is my system drive tried marking D as inactive with diskpart, but it doesnt change anything, it still says it is active, and if i mark C as active in diskmanagement, the OS wont load. So i put my Windows 7 disk back in and change it back to what it was
View 2 Replies
View Related
Aug 1, 2010
I have a task to hibernate my computer at 8pmIf I hibernate the computer earlier, and turn it on next morning, the task runs and hibernates the computer.I HAVE NOT selectede the "Run task as soon as posible after a schedule start is missed"
View 2 Replies
View Related
Aug 23, 2009
I started O&O partition manager and accidentally pressed active on partition C and now I cannot boot windows...
I am using build 7600 x86 I loaded up the windows 7 iso on a usb memory and booted from it and chose repair, it said it found things to repair, i pressed ok, it rebooted but it did not help, now I chose from the repair menu to automatically search and fix, it said startup repair cannot repair this computer automatically and it want to send information about this problem, I wonder how it figured on doing that...
oh yes i started the repair again and pressed command promt and followed this guide: MBR - Restore Windows 7 Master Boot Record and the first thing it said about D being the "DVD" was wrong in my case, it was E and from then on the guide was excally like in my case and I completed the guide, rebooted and still the same message "BOOTMGR is missing Press ctrl alt del to restart"
So what can i do to fix this? without needing to reinstall windows.
View 9 Replies
View Related
Jul 6, 2012
I see there is no log in windows 7 about the deleted fileI often use the shift + delete to delete files I do not need, unfortunately sometimes the parent folder gets deletedinstead (focus on the left tree area instead of the right list area)at least,a list of the deleted files would be good,is it nothing like such in the computer management area?is any program addition that would monitor creation/edition/deletion of files?
View 5 Replies
View Related
Nov 12, 2009
My friend recently had her computer upgraded to Windows 7 from Vista. She used the Vista StickyNotes program to keep track of important information. I told her that this program wasn't intended for permanent information storage, but she liked it because it was simple. She upgraded her computer to Windows 7, and now her sticky notes are gone.
My question is this: Is there any way to retrieve those old sticky notes?
I told her in all honesty that I think they are gone unless she wants to pay big bucks to go to a forensic type agency that could pull the information off. I just need another opinion. I hope I'm wrong.
I also hope I gave enough information and explained the situation with enough detail.
View 4 Replies
View Related
Dec 15, 2009
I have tried to Delete my Recovery Partition on my Acer Netbook but it doesn't work. I have the boot files on the C: Drive. My Recovery Partition has nothing on it.
I have used the cmd
select volume 1
active volume 1
delete volume 1
and than cmd freezes up on me and all i can do is close the program or check for online solution
than after i try
select volume 1
active volume 1
delete partition
i get an error:
"Cannot delete a protected partition without the force protected parameter set."
I have also tried to go in the Disk Management section and delete the Recovery Partition but when I select it, I can only click on settings.
How can I make the Recovery Partition become usable?
View 7 Replies
View Related
Aug 1, 2011
I'm using 64 bit Windows 7 w/service pack 1. Within the last two months, whenever I move files (it started as photos, but now it can be any file) the files are somehow being marked as hidden. Under 'Folder Options' I have to turn on the option to see hidden files, then untick the 'Hidden' box under file attributes on the affected file. It seems that the files that this happens to are random. For example, I can move a group of photos from the 'Pictures' library folder to another folder on the hand drive, and only some of those pictures will wind up being hidden after moved.
View 4 Replies
View Related
Apr 30, 2011
I am putting an older PC together from 3 partials & I installed this card because my sound was not working & it has Sound & Video ports on it & so I thought it might be a sound card. But It also has a phone line in & I believe a Ethernet plug in.After running Windows Update all of my issues, including no sound were resolved.I believe this card is a Dail UP modem & I would not use Dail Up if it was the only way left to get online...I would never surf the web again!I just need to know if I need this card for anything besides a dial up connection?
View 5 Replies
View Related
Jun 3, 2009
I can't install or uninstall anything more. It has been running just fine, but suddently I get this error when trying to install or uninstall:
The Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode, or if the Windows Installer is not correctly installed.
How can I correct this?
View 1 Replies
View Related
Jul 2, 2009
i cant start windows audio and windows audio input services (thus getting no sound) when i try and start the latter i get error message
the RPC server is unavailable
so i try to look for that service
(edit ...all ^these services are set to start automaticly)
and closes thing to it was RPC Endpoint mapper
which is already started
i go to control panel/hardware and sound/sound
and says
would you like to enable windows audio service
i click yes but fcuk all happens except
the playback/recording /sounds/communication window opens
but says no audio devices are installed what i know is BS.
View 7 Replies
View Related
Nov 16, 2011
WindowsUpdate_8024200D" "WindowsUpdate_dt000" everytime i try to download SP1 it gets to 100% starts to install and i get this error, ><
View 3 Replies
View Related
