because I can�t run anyone applicationOnce time that I try to run any application, the system become in slow performance and few minutes later appear the fallowing dialog box:"Can not start the dependency service or group"This occur with all kind of application that I try to run, installer, program, tool, anyone.
View 5 RepliesI finally got a new laptop after almost a year of struggling with my old one. I've had experience with using homegroup in the past and was thinking maybe I could access some of my files on my old laptop through that so I don't have to go through the trouble of manually transferring everything via flash drive and what not. I seem to be running into a problem though, my old laptop seems to be in its own homegroup I guess. Whenever I try to leave it, it says "windows cannot remove the computer from the homegroup".
I researched the problem, and used the troubleshooter which said that the homegroup provider service wasn't started and it couldn't be fixed automatically. I tried restarting starting the service but got that error 1608 thing. To bypass this I've tried joining whichever group my old laptop is in, but it can't seem to be found even though the two are both on the same wifi/network. If it matters, the new laptop is windows 8 and the one I'm having trouble with is windows 7.
I'm having a pretty big problem on my laptop- I can't connect to the internet and when I try to connect in the network and sharing centre it simply says 'The dependency service or group failed to start' and I am unable to connect to the internet (Using wi-fi). There's a lot more to it than that though. Simply put, here is a list of the problems I am facing:
1. Can't connect to the Internet
2. Cannot change theme, stuck in basic (Themes are grey and do not respond when I click on them in the control panel)
3. Overall brightness of laptop screen has decreased.
4. When opening my anti-virus software (avast) it says that the software is off and I should click the fix now button to turn it on. However, when I click on it nothing happens.
Please note that this problem occurred when I was messing around with command prompt ( I booted windows 7, pressed F8 and tried to check weather I could launch a USB program through safe mode- command prompt). I figured out I had no idea what the commands were and tried using one of the few commands I knew- ms config. I may have changed settings there and this could be how it happened, I'm not really sure. I'm not very experienced with command prompt but have full knowledge of control panel options, computer, etc.
I have the problem that the service WLAN Auto-Config isn't started. When I try to start the service manual then the error 1068 appear: "Error 1068: The dependency service or group failed to start." I have tried the three steps of onopko, but this is not working to my computer. On advice of StalkeR I have add the reg files of Black Viper site as Safe as well default. Every time I have restarted my computer after adding the reg files, but both files are resolving me problem.
View 1 Replies View RelatedIn the tray at the bottom right of the screen where the wireless signal strength indicator thingy sits I now have a blue circle. Sometimes I get an orange star where there used to be a white histogram.The computer still connects to the Internet but if I right click on the icon the icon will change to a plug and a red cross.If I open Network and Sharing Centre I see the message in the title to this post.As I type I now have "Not connected - Connections are available" in a box above the tray but I AM still connected.
View 2 Replies View RelatedI have network sharing issues and I believe the problem is that I cannot turn on file/printer sharing. When I click the button under advance sharing settings for file/printer and hit save (as an admin) it just goes back to off. Under Services, the Server option which is on automatic does not start. When I try to start it, it says:Windows could not start the Server service on Local Computer. Error 1075: The dependency service does not exist or has been marked for deletion.
View 5 Replies View RelatedI am getting the folllowing message and tried everything but nothing worked: Windows could not start the Check Point SSL Network Extender service on Local Computer. Error 1068: The dependancy service or group failed ton start
View 1 Replies View RelatedHow did it get activated? Do I need it? If not, how do I get rid of it? I have never heard of it before.This is a single user computer. No Homegrouping.Asus G72 Gamer's Notebook Windows 7 Home Premium 64 Bit?
View 4 Replies View RelatedI started to install a home network, but was interrupted. Now Windows 7 will not complete its startup except to say "access is denied." I did not start a recovery point before, hoping to get all the updates, etc. on before needing recovery. Is there any way to fix the problem without reloading everything?
View 9 Replies View RelatedI have a Dell XPS M1730 with Windows 7 Ultimate and it was doing an iTunes update and the lid got closed during the update process. Now when I start the computer up it says "the user profile service service failed the login, user profile cannot be loaded". The computer starts up in safe mode and won't let me do a system restore because it says it is shut off.When I look at User Profiles in Windows 7, it states that the users profile is as backup and the default profile is the local profile. How can I fix my computer to get my user profile back up and working?
View 1 Replies View RelatedSomeone out there please help me. I've been working on this problem for like 6 hrs.Failed to connect, "Group Policy Client Service" windows 7. Failed to Connect with "Group Policy Client Service".I copied the message and saved it as an image. I also ran dds and attach report.
View 14 Replies View RelatedI have been refused acccess to my laptop, message reads, The Group Policy Client Service failed the logon. Access denied. I am entering the correct password but i cannot log on
View 1 Replies View RelatedI am Running Windows 7 Professional. This is what it says every time I try and start the Fax Service.
The Fax Service on Local Computer started and then stopped. Some services stop automatically if they are not in use by any other service or program.
This is my first time here. I'm having a problem with my workstation service. The service won't start, so the services depending on workstation won't start neither. I get error 1068, but the network store interface service is started. I've tried to run sfc /scannow, but there are no problems there.I'm running win 7 64bit?
View 6 Replies View RelatedI am having an issue with Windows Search Service. Almost every time I boot (in the morning), the Search service is disabled. Either I have to repair the function, or go into Services and restart it. Each time I do, I set the Windows Search service to start automatically. Sometimes it does, and sometimes not. This has been going on for several months. It got so bad; I installed another search program that worked just fine. But in the end, I actually reformatted my HD and reinstalled all apps and restored Documents. For a couple of weeks, everything was fine. Now it has started again.
I have tried every fix that seemed reasonable and that I found online. My virus software (AVG) finds nothing. I checked all the Windows components and they are correct. No repair needed.
Here is my SysInfo data:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i7-2720QM CPU @ 2.20GHz, Intel64 Family 6 Model 42 Stepping 7
[Code]....
Got a Dell laptop with Wn7 premium and I noticed windows update was not up to date. Checked manually and it said Windows security center is not turned on, tried to turn it on and all I got was it won't start.
I checked and I uninstalled a Norton AV that was a come with, I rebooted and I still have same issue. I havent been able to keep Win 7 updated. I am using McAfee for AV, it seems to be working fine.
I have a Toshiba laptop with 64 bit Windows 7 Home Premium installed.
Although it has updated in the past, I am now not able to start the Windows Update Service. There is no malware on the system and I have tried several methods found on the internet such as resetting the service. I have also been unable to install MATS RunWindowsUpdate.
if servicename is running, do nothing.if servicename is not running, then start servicename, then record the date and time.based on my search [COLOR=blue ! important][COLOR=blue ! important]online[/COLOR][/COLOR], here is what I have so far.
[code]...
It looks like that the If statement is not working. Every time I run this batch file, it runs through all the command lines.and I got a error message said the service is already running.
I created a new Windows Service using C#. And Created a windows application to CREATE SERVICE, START SERVICE, STOP SERVICE and DELETE the SERVICE. This application is working fine when the UAC is turned OFF. When the UAC isturned ON then none of the above operations are working.1. Can i create a Service without Admin Rights, for creating am using the following[CODE]
View 5 Replies View RelatedI am currently running Windows 7 Ultimate x64 and one morning, my audio stopped working. I discovered audio stopped working because the Windows Audio Service, which relied on the Windows Audio Endpoint Builder service, which relied on the Power service, all stopped working. So to solve my audio problems, I must first start the Power service.However when I try to start it, it gives the following message:Windows could not start the Power service on Local Computer.Error 127: The specified procedure could not be found.
View 3 Replies View RelatedNew computer build with fresh install of Windows 7 (64) on formatted hard drive. I have no printers installed and am allowing window to download all updates. I can't install any printers as windows print spooler service is not loaded. If I go to services, and attempt to start the service, I get an error message that says "Windows could not start the Print spooler service on Local Computer" "Error 1053; The service did not respond to the start or control request in a timely fashion".
All dependant services are loaded and running. I have restored the computer to an earlier point and was able to determine the spooler services are running. I continue to allow updates and at some point the service becomes corrupted again. I check in services.msc after every restart. I can't seem to figure out what's corrupting the spooler service. I've even gone as far as to re-install a system image created just after all motherboard divers where installed. The service appears to be working fine and during the process of doing Windows updates,after a random restart, it's not working again. Once it stops working it never comes back until I do a system restore.
I had used ubuntu earlier for some time and had observed several errors during installation of even a very simple package. Now when I use windows I observed that not even a single installation go unfinished. Do windows packages not need any dependency..or do they have all their dependency pre-stored in their computer?
View 1 Replies View RelatedI ran across an issue when I booted my computer this morning. One of the tray icons was missing that usually shows and my cursor was spinning non-stop. Not to mention nothing else worked. It was frozen, so I pressed the power button and restarted it that way,Normal, not in safe mode.I'm sending 2 Snips to show you what I think was the reason for this. gupdate is set for Auto(Delayed) start in services. When I went in there and looked gupdate was no started at either time. The first time 9:35:58am was when this whole mess started. I just happened to go back an hour later to look in Event Viewer and it was listed again and still not started with the same explanation.Would this have caused this freeze or crash and is there anything that can be done to rectify this deal? I know some people disable gupdate and everything to do with it but I do not want to get into this.
View 6 Replies View RelatedA flag is appearing in the bottom right corner on my laptop running windows 7 Ultimate 64 bit version. On opening the action center by clicking on flag the message appears "Windows Security Center Service (Important) - The windows Security Center service is turned off" Next to this message is a button "Turn on now". When I click on the button gets an error message "windows security service can't be started". no details. checked my laptop for any virus, torjan, malware etc. using 3 different tools: McAfee, Windows malicious software removal tool, Malwarebytes No virus or suspecious programs try to start the security services manually using services.
View 2 Replies View Relatedhelping a friend fixing his Internet access on his Windows 7 machine.The machine was previously on a wired connection, and was working fine for 2 years.But the machine was moved, and an USB wifi dongle was purchased. And now he can't get online.Started debugging with disabling IPv6 on the connection. Diasbles firewall. Uninstalled two antivirus programs. No luck.Then tried to reset the TCP/IP stack with: netsh winsock reset catalog and netsh int ip reset reset.logThe I came over this post, and followed all the steps in flyguy747's answer. Still no luck.I downloaded and ran Farbar service scanner, but could not find any MD5 error on any of dll's.what i should try next?
Farbar log:Farbar Service Scanner Version: 19-09-2012
Ran by Jentutten (administrator) on 27-09-2012 at 21:24:10
Running from "C:\Ny mappe"
Microsoft Windows 7 Home Premium Service Pack 1 (X64)
[code]....
Below error has been keep popping in Windows 7 Event Viewer whenever I bootup my system, I had even format my system drive and it still happening.I also have observed that now my PC took a little while more to load.The WinRing0_1_2_0 service failed to start due to the following error:The system cannot find the file specified.Attached is the screenshot of the error.
View 14 Replies View RelatedThe service is set to disabled which is re3stricting me to connect a bluetooth device. So i go into services to change the service to automatic, but an error message comes up saying "system cannot find the path specified"
View 9 Replies View RelatedI am having an issue with Windows Search Service. Almost every time I boot (in the morning), the Search service is disabled. Either I have to repair the function, or go into Services and restart it. Each time I do, I set the Windows Search service to start automatically. Sometimes it does, and sometimes not. This has been going on for several months. It got so bad; I installed another search program (Copernic) that worked just fine. But in the end, I actually reformatted my HD and reinstalled all apps and restored Documents. For a couple of weeks, everything was fine. Now it has started again. On boot the Windows Search service does not start.I have tried every fix that seemed reasonable and that I found online (too many to recite here). My virus software (AVG) finds nothing. I checked all the Windows components and they are correct.
Here is my System information:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i7-2720QM CPU @ 2.20GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 8
RAM: 8075 Mb
Graphics Card: Intel(R) HD Graphics Family, -250 Mb
Hard Drives: C: Total - 459737 MB, Free - 366381 MB; G: Total - 305242 MB, Free - 186944 MB; I: Total - 476937 MB, Free - 366068 MB; Q: Total - 15999 MB, Free - 7174 MB;
Motherboard: LENOVO, 4270CTO
Antivirus: AVG Internet Security 2012, Updated and Enabled
I cant start Volume Shadow Copy Error is:The system cannot find path specified. Error 3 But I do have VSSVC.exe in my system32 folder I have this in registry under description @%systemroot%system32vssvc.exe,-101 I think that everything is ok, Remote Procedure Call (RPC) is running
View 9 Replies View RelatedI have created a service using the following command in cmd prompt:sc \computername create servicename binpath= C:WindowsSystem32sam.exeThen in the service list, I could see my service.When I right clicked on the service and clicked on Start , I am getting a pop-up with the following error: Windows could not start the newservice4 service on Local Computer.Error 1053: The service did not respond to the start or control request in a timely fashion.
View 2 Replies View RelatedI am trying to upgrade my son's laptop from Vista to Windows 7. My son's computer is a Toshiba Qosmio and I ran the Toshiba Upgrade Tool with no problems. The problem I have now is that the virtual memory service is not starting so when I start the install of windows 7, I get the error "windows could not retrieve information about disks on this computer". I tried to manually start the service and get the error "service failed to start".
If I put it on automatic, it just stays on "starting". Obviously, this is not allowing windows 7 to see my disks. Disk management does not show my disks due to virtual memory service not being able to start. The computer is ready for the upgrade, just can't get passed this problem. I don't want to use the recovery disks if I can help it.