I have been refused acccess to my laptop, message reads, The Group Policy Client Service failed the logon. Access denied. I am entering the correct password but i cannot log on
View 1 RepliesI started to install a home network, but was interrupted. Now Windows 7 will not complete its startup except to say "access is denied." I did not start a recovery point before, hoping to get all the updates, etc. on before needing recovery. Is there any way to fix the problem without reloading everything?
View 9 Replies View RelatedOne of my user accounts have been getting the error above after a shutdown.I tried system restore but it did not work.I have tried disabling non-windows service on startup and that didn't work.
View 9 Replies View RelatedSomeone out there please help me. I've been working on this problem for like 6 hrs.Failed to connect, "Group Policy Client Service" windows 7. Failed to Connect with "Group Policy Client Service".I copied the message and saved it as an image. I also ran dds and attach report.
View 14 Replies View RelatedHow did it get activated? Do I need it? If not, how do I get rid of it? I have never heard of it before.This is a single user computer. No Homegrouping.Asus G72 Gamer's Notebook Windows 7 Home Premium 64 Bit?
View 4 Replies View RelatedI just built myself a new computer, and it turned out that the dual ram channel on the motherboard was faulty. I ordered a new motherboard and RMA'd the faulty board. When I installed the new motherboard, I received an error when trying to login to my old account: User group client failed the logon. Access denied.I am then returned to the login screen. Rebooting in safe mode didn't caused the system to hang a few times, but eventually brought me to the login screen, and I was able to get to the desktop and create a new user profile, and deleted the password from my old profile. Rebooted again and now I have access to the new admin account, but still get the error when trying to access my old profile. I did some research and people suggested changing the registry value GUID to GUID1 in the Windows NT/Profile List for the bad profile, but there is no "GUID" value under that profile.Windows restore doesn't find any restore points which is strange, because I made several in the week before I installed the replacement board as I messed around with settings and configured the machine.Now, I have full access to my machine through the new profile and everything is working perfectly, but I'd really like to be able to get my old login working again. There's a lot of files scattered around, games with saves tied to that profile, the odd install that I let install without checking "all users" on, etc. I -could- potentially migrate all that *** onto the new profile, but it would take time, time that I'd rather spend either with my son, or being conquered by the Aztecs in Civ 5.
View 5 Replies View RelatedI've tried going into regedit and changing the RefCount to 0 and restarting but it keeps going back to 2 - it was at 3 originally but keeps reverting to 2 when I restart.
View 1 Replies View RelatedWhen trying to log onto my user account, i get this error.
"The user profile Service service failed the logon.
User profile cannot be loaded" Unfortantly this is the only account i have so i have no way to access my computer.
I am running Windowns 7 Ultimate 32 bit (non beta)
Any help please?
I am looking for a way to prevent writing to all removable devices. I have found the setting in group policy and enabled it. However, admin credentials are requested and if entered correctly, the user can write to the external drive. I want to configure this to allow writing to a removable device ONLY if the user is in the correct security group or a member of the domain administrators. In other words, this policy would apply to all users and be denied to the security group. We are still in a 2003 domain, although most of our DCs are now Windows 2008 R2. This policy would apply only to users logging in to our Windows 7 machines.
View 5 Replies View RelatedI'm creating a local group policy to lock down a Windows 7 Pro Workstation for use in the Staff room.It's the first time I've used it, previously I've worked a bit with AD. but I've been following on line tutorials and using google and I'm nearly there with it.But I'm stuck on one thing. My approach has been to remove access to pretty much everything apart from IE, Firefox and Skype icons on the task bar. I've got the start menu empty apart from the shutdown button, which is what I want but at the top of the start menu is the users icon/picture thing and if i click on it it takes me to "user accounts". I can't for the life of me work out how to get rid of the picture or just stop this happening.
View 1 Replies View RelatedHow can i close the drive "g" in local group policy from "prevent access to drives ..."? The drive "G" isn`t in the list?
View 10 Replies View RelatedI finally got a new laptop after almost a year of struggling with my old one. I've had experience with using homegroup in the past and was thinking maybe I could access some of my files on my old laptop through that so I don't have to go through the trouble of manually transferring everything via flash drive and what not. I seem to be running into a problem though, my old laptop seems to be in its own homegroup I guess. Whenever I try to leave it, it says "windows cannot remove the computer from the homegroup".
I researched the problem, and used the troubleshooter which said that the homegroup provider service wasn't started and it couldn't be fixed automatically. I tried restarting starting the service but got that error 1608 thing. To bypass this I've tried joining whichever group my old laptop is in, but it can't seem to be found even though the two are both on the same wifi/network. If it matters, the new laptop is windows 8 and the one I'm having trouble with is windows 7.
I'm having a pretty big problem on my laptop- I can't connect to the internet and when I try to connect in the network and sharing centre it simply says 'The dependency service or group failed to start' and I am unable to connect to the internet (Using wi-fi). There's a lot more to it than that though. Simply put, here is a list of the problems I am facing:
1. Can't connect to the Internet
2. Cannot change theme, stuck in basic (Themes are grey and do not respond when I click on them in the control panel)
3. Overall brightness of laptop screen has decreased.
4. When opening my anti-virus software (avast) it says that the software is off and I should click the fix now button to turn it on. However, when I click on it nothing happens.
Please note that this problem occurred when I was messing around with command prompt ( I booted windows 7, pressed F8 and tried to check weather I could launch a USB program through safe mode- command prompt). I figured out I had no idea what the commands were and tried using one of the few commands I knew- ms config. I may have changed settings there and this could be how it happened, I'm not really sure. I'm not very experienced with command prompt but have full knowledge of control panel options, computer, etc.
When I boot up I get to the sign in page .When I sign in I get the message: User Profile Service Failed To Logon and things go round in a loop, I can't get to the Start Menu.
View 6 Replies View RelatedJust finished uninstalling certain things I did not need any longer and when I was done I started to notice that my desktop items disappeared when I refreshed the desktop and My Computer complained about the location of login details. (I cannot remember the exact error) now when I restarted my computer I receive the error at the welcome screen saying "The User Service service failed the logon. User cannot be loaded". I've researched this error and many things talk about starting in safe mode which I have managed to do but nothing else seems to be clear from there.
View 3 Replies View RelatedI have just upgrdaed from windows 7 home to professional. I changed the computer name and rebooted, then I put the computer on the domain, and reboted. I can login as the donamenameadministrator I can login as: computernameackup admin account I can login as computernameusername
but when i try to login as: domainnameusername
i get the follwoinf error: The user profile service failed the logon
I have tried to look in the registery and there are no .BAK profiles. I delted all profiles. I am not sure why I cn log in to the domain as the administrator but not as the user.
I have the same issue the other user mentions. I can log on as a domain admin, but not as a domain user. There are only 4 profiles in the registry, with no .bak extensions:
1 is the default user
2 is the localservice account
3 is the networkservice account
4 is the local "Administrator" account
I was assuming the problem was with the default user, so I followed the article previously mentioned, and changed the RefCount from "1" to "0", and the State was already set to "0". I am still unable to log in with any domain account except for domain administrators.
When I try to start DNS Client via Service.msc, I have to first do Right click > Properties > Startup type: Automatic > Apply > Start > When I click Apply, I get a message saying Access Denied. I *am* the Administrator. The problem is not exclusively DNS Client service: there are other services that do that.
View 9 Replies View RelatedI have the problem that the service WLAN Auto-Config isn't started. When I try to start the service manual then the error 1068 appear: "Error 1068: The dependency service or group failed to start." I have tried the three steps of onopko, but this is not working to my computer. On advice of StalkeR I have add the reg files of Black Viper site as Safe as well default. Every time I have restarted my computer after adding the reg files, but both files are resolving me problem.
View 1 Replies View RelatedWindows 7 Pro 32 bit on a domain?I have a group policy set on an OU named LAPTOPS. The policy gets applied, however the User ConfigWindows SettingScriptsLogon DOES NOT. When you run the GPRESULTS on the laptop, I see the policy settings being applied EXCEPT for the LOGON script. Its not there. I dont see any errors and cant figure out why Windows would ignore this one setting in the policy but apply the rest. I've tried deleting and recreating the policy but that does not work.
View 7 Replies View RelatedI have been trying to enable the search feature on my windows 7 64-bit machine but when I attempt to do so, or use indexing, nothing seems to happen. When I try to enable windows search in services I get "Windows could not start the Windows Search service on Local Computer - error 5 access denied."
When I detect problems in search and indexing it tells me windows search service is not running but lists the error as not fixed. When I try to manually add a config folder in the ProgramData - Microsoft - Search - Data folder it erases itself after a few seconds.
This account has full admin control, I don't get it. I even tried to do this through the hidden admin account.
This laptop is only a month old but I can't turn the search feature on. I think maybe if I modify it to not include the external in indexing it would not mess up, but I can't even touch the modify button without enabling windows search, which is currently impossible.
In the tray at the bottom right of the screen where the wireless signal strength indicator thingy sits I now have a blue circle. Sometimes I get an orange star where there used to be a white histogram.The computer still connects to the Internet but if I right click on the icon the icon will change to a plug and a red cross.If I open Network and Sharing Centre I see the message in the title to this post.As I type I now have "Not connected - Connections are available" in a box above the tray but I AM still connected.
View 2 Replies View Relatedwhen i try to create a new user profile ~ with or without a password, it shows up on the main login page, but when i click on it to open, the message "UserProfileService_service failed the logon_user profile cannot be loaded". i have searched microsoft support with little solutions listed. and the ones that are listed seem too technical for me to be trying on my own. there are many posts there with this problem, but they all seem to be several years old.
i am using windows 7. i have never been able to create any accounts other than my administrator account & the one account i use for all my general computer use. i have been using norton 360 with no problems. i have resorted to just using any "log in/log out' links on all the sites my husband wants to use.i am really not all that confident doing anything super technical to fix this, since i don't have a real understanding of different extensions or types of files. i am afraid i could really mess everything up really bad. but, it would just be SO MUCH EASIER & FASTER if i had my account & my husband had his own account.
My wife's Dell desktop (after a nighttime thunderstorm) will not permit her to log on. When she enters the password she gets the following message: "The User Profile Service service failed the logon. User profile cannot be loaded". Has anyone encountered this issue and is there a user fix, or should we take the computer back to where it was bought for service?
View 5 Replies View RelatedI'm trying to install Java 7 & I keep getting this error:installer : wrapper.createfile failed with error 5: access is denied?I have uninstalled all previous versions of Java, tried installing as administrator... Nothing is working.
View 3 Replies View RelatedI'm working on a computer that appears to have gone through the "Windows Recover" virus/malware. The user appeared to do a good job of removing the virus and used System Restore to dial the system back about a week (which unfortunately is the furthest back the restore points go for some reason). Everything seemed to work except for the main users account, which had it's profile locations changed to something like c:usersTEMP.username-PC.000. It was pointing to this directory instead of the original directory. I then opened up regedit and found the entries atHKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerShell Folders all pointing to the wrong folder, so I manually edited every entry to point to the correct folder and restarted.
This ended up working against me. When I logged into the account none of the shell folder shortcuts in the start menu would do anything when you clicked on them. The menu would stay up and it was as if I was clicking on nothing at all; no response.Instead of reversing the edits I had just made manually I decided to try using System Restore to revert the system back to the earliest date, which the owner of the PC said they had done themselves before I got there. I figured the worst that could happen would be it would be just as it was when I first looked at it.After performing system restore I can only log into the Administrator account.Every other account on the system produced the error message "The User Profile Service service failed the logon. The user profile cannot be loaded."
I have a windows 7(SP1) peer-peer netwrk at my work place.In order to block usb write access for users i have created three accountssuperAdmin : Administrator account with no restrictions localAdmin : Administrator account with removeable disk deny write access policy enabled user :standard account .
View 3 Replies View RelatedI have logged in as administrator and I am trying to start up the 'Group Policy Editor' using gpedit.msc but Windows 7 can't find it. Is this something that has to be installed or comes inbuilt with Windows 7?
View 3 Replies View RelatedI have logged in as administrator and I am trying to start up the 'Group Policy Editor' using gpedit.msc but Windows 7 can't find it. Is this something that has to be installed or comes inbuilt with Windows 7?
View 7 Replies View RelatedI have these problems and i would like to get rid of them. What can i do to have full access to the settings?
View 8 Replies View RelatedI've got a comp that used to be connected to a domain where it was locked down pretty tightly. I've got full admin rights on it, but it's still denying me the right to change settings in McAfee (and other programs like Windows Firewall, etc).I cleared out all group policies on the computer, but apparently not.Right now McAfee is the last thing I have to try to get a program working (I think it's stopping it from running), but I can't find any way to shut it down, prevent it from working, or enable specific programs, every single setting is grayed out.So, short of going into safe mode and deleting every McAfee file I can find, do you have any idea how I can completely wipe out all old security settings on this machine, group policies, etc?
View 9 Replies View Related