User Group Client Failed Logon
Dec 20, 2010
I just built myself a new computer, and it turned out that the dual ram channel on the motherboard was faulty. I ordered a new motherboard and RMA'd the faulty board. When I installed the new motherboard, I received an error when trying to login to my old account: User group client failed the logon. Access denied.I am then returned to the login screen. Rebooting in safe mode didn't caused the system to hang a few times, but eventually brought me to the login screen, and I was able to get to the desktop and create a new user profile, and deleted the password from my old profile. Rebooted again and now I have access to the new admin account, but still get the error when trying to access my old profile. I did some research and people suggested changing the registry value GUID to GUID1 in the Windows NT/Profile List for the bad profile, but there is no "GUID" value under that profile.Windows restore doesn't find any restore points which is strange, because I made several in the week before I installed the replacement board as I messed around with settings and configured the machine.Now, I have full access to my machine through the new profile and everything is working perfectly, but I'd really like to be able to get my old login working again. There's a lot of files scattered around, games with saves tied to that profile, the odd install that I let install without checking "all users" on, etc. I -could- potentially migrate all that *** onto the new profile, but it would take time, time that I'd rather spend either with my son, or being conquered by the Aztecs in Civ 5.
View 5 Replies
ADVERTISEMENT
Oct 3, 2011
I started to install a home network, but was interrupted. Now Windows 7 will not complete its startup except to say "access is denied." I did not start a recovery point before, hoping to get all the updates, etc. on before needing recovery. Is there any way to fix the problem without reloading everything?
View 9 Replies
View Related
Feb 20, 2013
I have been refused acccess to my laptop, message reads, The Group Policy Client Service failed the logon. Access denied. I am entering the correct password but i cannot log on
View 1 Replies
View Related
Nov 19, 2012
Someone out there please help me. I've been working on this problem for like 6 hrs.Failed to connect, "Group Policy Client Service" windows 7. Failed to Connect with "Group Policy Client Service".I copied the message and saved it as an image. I also ran dds and attach report.
View 14 Replies
View Related
May 20, 2012
One of my user accounts have been getting the error above after a shutdown.I tried system restore but it did not work.I have tried disabling non-windows service on startup and that didn't work.
View 9 Replies
View Related
Jan 16, 2011
When I boot up I get to the sign in page .When I sign in I get the message: User Profile Service Failed To Logon and things go round in a loop, I can't get to the Start Menu.
View 6 Replies
View Related
Jun 29, 2012
Just finished uninstalling certain things I did not need any longer and when I was done I started to notice that my desktop items disappeared when I refreshed the desktop and My Computer complained about the location of login details. (I cannot remember the exact error) now when I restarted my computer I receive the error at the welcome screen saying "The User Service service failed the logon. User cannot be loaded". I've researched this error and many things talk about starting in safe mode which I have managed to do but nothing else seems to be clear from there.
View 3 Replies
View Related
Nov 28, 2011
I have just upgrdaed from windows 7 home to professional. I changed the computer name and rebooted, then I put the computer on the domain, and reboted. I can login as the donamenameadministrator I can login as: computernameackup admin account I can login as computernameusername
but when i try to login as: domainnameusername
i get the follwoinf error: The user profile service failed the logon
I have tried to look in the registery and there are no .BAK profiles. I delted all profiles. I am not sure why I cn log in to the domain as the administrator but not as the user.
View 1 Replies
View Related
Dec 14, 2011
I have the same issue the other user mentions. I can log on as a domain admin, but not as a domain user. There are only 4 profiles in the registry, with no .bak extensions:
1 is the default user
2 is the localservice account
3 is the networkservice account
4 is the local "Administrator" account
I was assuming the problem was with the default user, so I followed the article previously mentioned, and changed the RefCount from "1" to "0", and the State was already set to "0". I am still unable to log in with any domain account except for domain administrators.
View 2 Replies
View Related
Dec 7, 2011
I'm working on a computer that appears to have gone through the "Windows Recover" virus/malware. The user appeared to do a good job of removing the virus and used System Restore to dial the system back about a week (which unfortunately is the furthest back the restore points go for some reason). Everything seemed to work except for the main users account, which had it's profile locations changed to something like c:usersTEMP.username-PC.000. It was pointing to this directory instead of the original directory. I then opened up regedit and found the entries atHKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerShell Folders all pointing to the wrong folder, so I manually edited every entry to point to the correct folder and restarted.
This ended up working against me. When I logged into the account none of the shell folder shortcuts in the start menu would do anything when you clicked on them. The menu would stay up and it was as if I was clicking on nothing at all; no response.Instead of reversing the edits I had just made manually I decided to try using System Restore to revert the system back to the earliest date, which the owner of the PC said they had done themselves before I got there. I figured the worst that could happen would be it would be just as it was when I first looked at it.After performing system restore I can only log into the Administrator account.Every other account on the system produced the error message "The User Profile Service service failed the logon. The user profile cannot be loaded."
View 1 Replies
View Related
Nov 17, 2012
when i try to create a new user profile ~ with or without a password, it shows up on the main login page, but when i click on it to open, the message "UserProfileService_service failed the logon_user profile cannot be loaded". i have searched microsoft support with little solutions listed. and the ones that are listed seem too technical for me to be trying on my own. there are many posts there with this problem, but they all seem to be several years old.
i am using windows 7. i have never been able to create any accounts other than my administrator account & the one account i use for all my general computer use. i have been using norton 360 with no problems. i have resorted to just using any "log in/log out' links on all the sites my husband wants to use.i am really not all that confident doing anything super technical to fix this, since i don't have a real understanding of different extensions or types of files. i am afraid i could really mess everything up really bad. but, it would just be SO MUCH EASIER & FASTER if i had my account & my husband had his own account.
View 10 Replies
View Related
Jul 13, 2011
My wife's Dell desktop (after a nighttime thunderstorm) will not permit her to log on. When she enters the password she gets the following message: "The User Profile Service service failed the logon. User profile cannot be loaded". Has anyone encountered this issue and is there a user fix, or should we take the computer back to where it was bought for service?
View 5 Replies
View Related
Sep 27, 2012
I've tried going into regedit and changing the RefCount to 0 and restarting but it keeps going back to 2 - it was at 3 originally but keeps reverting to 2 when I restart.
View 1 Replies
View Related
Sep 22, 2009
When trying to log onto my user account, i get this error.
"The user profile Service service failed the logon.
User profile cannot be loaded" Unfortantly this is the only account i have so i have no way to access my computer.
I am running Windowns 7 Ultimate 32 bit (non beta)
Any help please?
View 1 Replies
View Related
Jan 11, 2013
I accidently screwed up the administrator account and once, i tried to install a software and it came "You need a administrator password to proceed"so i typed it then it came the error"this user has not been granted the requested logon type at this computer i tried a lot but its still not working and i cant install anythin.
View 5 Replies
View Related
Apr 18, 2011
I just want to know how to create a user profile logon for the docked and undocked logon in Windows 7?
View 1 Replies
View Related
Dec 4, 2010
How did it get activated? Do I need it? If not, how do I get rid of it? I have never heard of it before.This is a single user computer. No Homegrouping.Asus G72 Gamer's Notebook Windows 7 Home Premium 64 Bit?
View 4 Replies
View Related
Feb 17, 2012
I am a lab technician for Microsoft classes at a community college. One of our students somehow messed up his hard drive. The computer is running Windows 7 Enterprise SP1 64-bit. The system has two administrator accounts and one standard user account. I am still able to logon with those accounts and there are SID keys for each of these users in the registry.
Now when we create a new user, the account is created without any problems. The user shows up on the logon page and after running the net user command, it shows up there as well. When I try to logon with the new user, I get a message: The User Profile Service failed the logon. User profile cannot be loaded.
None of the new user accounts show up in the registry. The other anomaly that I see is that the Default User folder is missing in each of the Users subdirectory for the three accounts where I have no problems.
I have read the Microsoft Knowledge Base Article 947215 and none of the methods apply to my problem. I also checked Local Group Policies and the Do not logon users with temporary profiles setting is not configured.
View 4 Replies
View Related
Apr 22, 2011
I changed the values in HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionProfileList in order to move the default user locations to my second partition. I then created a new user profile but when I try to login I get the message 'The User Profile Service failed the login'. When I set these values back to normal, new accounts work fine but I really want my user accounts on the second partition.
View 1 Replies
View Related
Jan 12, 2013
I finally got a new laptop after almost a year of struggling with my old one. I've had experience with using homegroup in the past and was thinking maybe I could access some of my files on my old laptop through that so I don't have to go through the trouble of manually transferring everything via flash drive and what not. I seem to be running into a problem though, my old laptop seems to be in its own homegroup I guess. Whenever I try to leave it, it says "windows cannot remove the computer from the homegroup".
I researched the problem, and used the troubleshooter which said that the homegroup provider service wasn't started and it couldn't be fixed automatically. I tried restarting starting the service but got that error 1608 thing. To bypass this I've tried joining whichever group my old laptop is in, but it can't seem to be found even though the two are both on the same wifi/network. If it matters, the new laptop is windows 8 and the one I'm having trouble with is windows 7.
View 5 Replies
View Related
Aug 15, 2012
I'm having a pretty big problem on my laptop- I can't connect to the internet and when I try to connect in the network and sharing centre it simply says 'The dependency service or group failed to start' and I am unable to connect to the internet (Using wi-fi). There's a lot more to it than that though. Simply put, here is a list of the problems I am facing:
1. Can't connect to the Internet
2. Cannot change theme, stuck in basic (Themes are grey and do not respond when I click on them in the control panel)
3. Overall brightness of laptop screen has decreased.
4. When opening my anti-virus software (avast) it says that the software is off and I should click the fix now button to turn it on. However, when I click on it nothing happens.
Please note that this problem occurred when I was messing around with command prompt ( I booted windows 7, pressed F8 and tried to check weather I could launch a USB program through safe mode- command prompt). I figured out I had no idea what the commands were and tried using one of the few commands I knew- ms config. I may have changed settings there and this could be how it happened, I'm not really sure. I'm not very experienced with command prompt but have full knowledge of control panel options, computer, etc.
View 9 Replies
View Related
May 25, 2012
So a while back I was watching a video and a pop up appeared and I it asked me if I wanted to download something and I clicked no. But that same pop up continuously appeared and I accidentally clicked yes. The computer froze so I forced shut down and whrn I tried to turn it on again, the BSOD appeared. It turned off a second time and then when it restared, the safe mode window appeared and I ran that and it tried to fix the problem but now whenever I try to get on, there is a black screen with a window that says" interactive logon process has failed. Please consult the event log" I click ok and I just appears again. There is no getting past it and I am unable to do anything on my. Computer.
View 4 Replies
View Related
Jul 13, 2012
I just did a clean install of windows 7 ultimate and I got this error before it booted into the desktop and my computer restarted and then logged into the desktop and all is working fine at the moment I've checked my logs and nothing is been reported there should I be woried or will it be ok
View 1 Replies
View Related
Apr 29, 2012
I've installed the latest drivers for each. When I try to play a game I get the error stated in the thread title. I have also tried deleting and reinstalling the drivers. I've looked on several forums for this error message and possible solutions.
View 1 Replies
View Related
Nov 29, 2012
I'm running windows 7 I need to know why I have an "Account Unknown" listed under group or user names.his was found when I saw an unusual shortcut for Safari on my desktop.It came up when I selected security tab.Path : C:UsersPublicDesktopSafari.Ink My PC is set up for Home not public as well
View 1 Replies
View Related
Feb 22, 2010
I am setting up multiple machines to run Windows 7 on my home network. I would like the users to have the same profile settings regardless of the machine they log into. Can user profiles be synced between machines within the same homegroup?If not, during the setup of the user, can I copy user preferences/profile settings so when they log in for the first time they don't have to reset everything?
View 4 Replies
View Related
Jul 18, 2012
In my server 2008 r2, i have applied group policy setting, un fortunately i applied local adminstrators account disabled thorugh group polcy, at the same time my domain controller also disabled & all local admin also disabled,i cant logon to the domain admin account in my server because it is disabled, pl give me a solution, how to enable my domain admin (OR) how to reset group policy (OR) how to reset the group policy which was applied through this server in user end.
View 3 Replies
View Related
Jun 18, 2011
I recently bought a new asus laptop and after some issues with it i decided to format and clean install the OS. It came with windows 7 home premium 64-bit. I went out and bought windows 7 Pro 64bit and attempted an install. The installation went through smoothly til the end where I received the message "interactive logon has failed, please consult the event log ..." after this message it rebooted and attempted a start-up only to be met with a strange gray screen and then it reboots again.
Nothing else works like safe mode, or advanced boot options. Ive tried installing several times with with the same result. Now whats weird is that when I install a 32-bit version of this there's no problems, except that its designed for a 64 and runs slowly. So why would I be able to install a 32bit version of windows and not a 64 bit? Even though all the hardware is for a 64??
View 1 Replies
View Related
Feb 9, 2011
I recently received a new ASUS Eee PC running Windows 7 Starter. It started fine the first 3 or 4 times I have tried to use it, but now, I am receiving this error message: "Interactive logon process initialization has failed. Please consult the event log for more details". I get the same message in safe mode, and the Repair Your Computer and Last Known Good Configuration options do not work. The computer has not created a system restore point, and I could not burn a system image due to lack of a burner (I have an external one on order).
View 3 Replies
View Related
Mar 22, 2010
I have a PC that dual boots both XP and 7. Yesterday, I restarted my computer to go from 7 to XP to play a game, all fine and dandy so far. When I came back onto windows 7, the Windows intro logo loads, disappears as usual, but instead of loading by desktop, I get :
"Interactive logon process initialization has failed. Please consult the event log for more details."
So I decided to go check my event log. I booted on XP, went to G:WindowsSystem32winevtLogs, copied the file : Application.evtx to my USB key, and opened it up on another Win 7 system to check it out. I thought I could find the error, but I can't get any logs out of the event log. The last entry being a month ago for some reason. I want to avoid formatting my Win 7 partition at all costs. Also :
- Safe mode doesn't work
- System restore doesn't work
- System repair doesn't work.
I've tried almost everything so far. I do in fact have complete access to my G: partition, which is my Windows 7 partition.
View 9 Replies
View Related
Sep 5, 2011
I have the problem that the service WLAN Auto-Config isn't started. When I try to start the service manual then the error 1068 appear: "Error 1068: The dependency service or group failed to start." I have tried the three steps of onopko, but this is not working to my computer. On advice of StalkeR I have add the reg files of Black Viper site as Safe as well default. Every time I have restarted my computer after adding the reg files, but both files are resolving me problem.
View 1 Replies
View Related
